Pagina 1 di 1
[NVidia] come configurare la schermata di avvio
Inviato: mercoledì 6 agosto 2008, 21:37
da ferdinandobus
Sto utilizzando con grande soddisfazione ubuntu, funziona tutto alla perfezione tranne che la schermata di inizio, per intenderci quella che richiede nome utente e password.
Le inserisco "alla cieca" una alla volta e premo tab . In pratica vedo solo un enorme logo di ubuntu. Come poso fare per ridimensionare la finestra?
Un grazie a tutti.
Re: [NVidia] come configurare la schermata di avvio
Inviato: mercoledì 6 agosto 2008, 23:17
da ciccoale
Ciao e benvenuto

(da terminale)... mi devi copiare il contenuto di
Re: [NVidia] come configurare la schermata di avvio
Inviato: giovedì 7 agosto 2008, 15:20
da ciccoale
ferdinandobus ha scritto:
Grazie per il tuo prezioso aiuto, ti invio questo messaggio privato perchè non so fare in altro modo (sono un primitivo della comunicazione (bad)). Qui sotto è riportato tutto ciò che mi hai chiesto. Grazie e a presto .
Codice: Seleziona tutto
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "nVidia Corporation NV34 [GeForce FX 5200]"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 0
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Vendorname "Generic CRT Display"
Modelname "Monitor 1024x768"
Horizsync 31.5-61.0
Vertrefresh 50-75
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV34 [GeForce FX 5200]"
Monitor "Generic Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1280 960
Modes "640x480@60" "640x480@72" "640x480@75" "800x600@56" "800x600@72" "800x600@75" "800x600@60" "832x624@75" "1024x768@75" "1024x768@70" "1024x768@60" "1280x960@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "device" #
Identifier "device1"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 1
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "640x480@60"
EndSubSection
EndSection
Section "monitor" #
Identifier "monitor1"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
Ciao mi sposto qui perchè è giusto che si risolva al topic aperto da te e non in privato, comunque devi modificare la sezione screen i questo modo, riapri il file con
e modificare quello in grassetto e solo quello
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes
"1280x1024@60"
EndSubSection
EndSection
salva e chiudi

Re: [NVidia] come configurare la schermata di avvio
Inviato: giovedì 7 agosto 2008, 15:26
da shouldes
Se è un crt da 17" metti questa:
1024x768@75
Re: [NVidia] come configurare la schermata di avvio
Inviato: giovedì 7 agosto 2008, 20:22
da ferdinandobus
Grazie per l'aiuto, però non funziona ancora >:(
ho dato un'occhiata al file e ho trovato questa configurazione "strana" può essere lei causa del disguido?
Section "monitor" #
Identifier "monitor1"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Re: [NVidia] come configurare la schermata di avvio
Inviato: giovedì 7 agosto 2008, 22:50
da shouldes
Ma che hai toccato displayconfig-gtk?
Mai fare una cosa simile con una scheda nvidia.
Fai riscrivire xorg.conf a nvidia-settings senza il merge che fai prima, poi rimetti la tastiera in italiano.