premetto di avere già letto tutti i post sui sensori presenti sul forum
Ho un notebook Asus con processore dothan 1.6 centrino.
lspci
Codice: Seleziona tutto
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 21)
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 21)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
0000:02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
0000:02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04)
0000:02:02.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
Codice: Seleziona tutto
sensors version 2.9.1 with libsensors version 2.9.1Codice: Seleziona tutto
Manufacturer Chip Detected Driver Initial Support Status, Comments
I2C / LM Sensors Linux
Intel 82801AA, 82801BA, 82801CA/CAM (ICH3), 82801DB (ICH4), 82801EB (ICH5) yes i2c-i801 2.4.3 2.5.65
Intel 6300ESB, ICH6 yes i2c-i801 2.8.7 2.6.7
Intel ICH7 yes i2c-i801 2.9.0 2.6.11
Intel ESB2 yes i2c-i801 2.9.2 2.6.12
il mio kernel è : 2.6.12-10 ubuntu 5.10
se lancio un sensor-detect (da root) mi fallisce la rilevazione dei sensori:
Codice: Seleziona tutto
We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 00:1f.3: Intel 82801DB ICH4
Probe succesfully concluded.
We will now try to load each adapter module in turn.
Module `i2c-i801' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is already loaded.
We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Next adapter: SMBus I801 adapter at 0540
Do you want to scan it? (YES/no/selectively):
Client found at address 0x4c
Probing for `National Semiconductor LM75'... Failed!
Probing for `Dallas Semiconductor DS1621'... Failed!
Probing for `Analog Devices ADM1021'... Failed!
Probing for `Analog Devices ADM1021A/ADM1023'... Failed!
Probing for `Maxim MAX1617'... Failed!
Probing for `Maxim MAX1617A'... Failed!
Probing for `TI THMC10'... Failed!
Probing for `National Semiconductor LM84'... Failed!
Probing for `Genesys Logic GL523SM'... Failed!
Probing for `Onsemi MC1066'... Failed!
Probing for `Maxim MAX1619'... Failed!
Probing for `National Semiconductor LM82'... Failed!
Probing for `National Semiconductor LM83'... Failed!
Probing for `National Semiconductor LM90'... Failed!
Probing for `National Semiconductor LM89/LM99'... Failed!
Probing for `National Semiconductor LM86'... Failed!
Probing for `Analog Devices ADM1032'... Failed!
Probing for `Maxim MAX6657/MAX6658/MAX6659'... Failed!
Probing for `National Semiconductor LM63'... Failed!
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Probing for `Analog Devices ADT7461'... Failed!
Client at address 0x50 can not be probed - unload all client drivers first!
Client at address 0x51 can not be probed - unload all client drivers first!
Client found at address 0x69
Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan the ISA bus? (YES/no):
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83627EHF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8712F'
Trying address 0x0290... Failed!
Probing for `ITE IT8705F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!
Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
Failed! (0xea11)
Probing for `ITE 8705F Super IO Sensors'
Failed! (0xea11)
Probing for `ITE 8712F Super IO Sensors'
Failed! (0xea11)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
Failed! (0xea)
Probing for `Nat. Semi. PC87591 Super IO'
Failed! (0xea)
Probing for `Nat. Semi. PC87371 Super IO'
Failed! (0xea)
Probing for `Nat. Semi. PC97371 Super IO'
Failed! (0xea)
Probing for `Nat. Semi. PC8739x Super IO'
[b][color=yellow]Success... (no hardware monitoring capabilities)[/color][/b]
Probing for `Nat. Semi. PC8741x Super IO'
Failed! (0xea)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (0xea)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
Failed! (0xea)
Probing for `SMSC 47M14x Super IO Fan Sensors'
Failed! (0xea)
Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
Failed! (0xea)
Probing for `SMSC 47S42x Super IO Fan Sensors'
Failed! (0xea)
Probing for `SMSC 47S45x Super IO Fan Sensors'
Failed! (0xea)
Probing for `SMSC 47M172 Super IO'
Failed! (0xea)
Probing for `SMSC LPC47B397-NC Super IO'
Failed! (0xea)
Probing for `VT1211 Super IO Sensors'
Failed! (0xea)
Probing for `Winbond W83627HF Super IO Sensors'
Failed! (0xea)
Probing for `Winbond W83627THF Super IO Sensors'
Failed! (0xea)
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0xea)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0xea)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0xea)
Probing for `Winbond W83L517D Super IO'
Failed! (0xea)
Probing for `Winbond W83627EHF Super IO Sensors'
Failed! (0xea11)
Do you want to scan for secondary Super I/O sensors? (YES/no):
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF Super IO Sensors'
Failed! (skipping family)
Sorry, no chips were detected.
Either your sensors are not supported, or they are
connected to an I2C bus adapter that we do not support.
See doc/FAQ, doc/lm_sensors-FAQ.html, or
http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/doc/lm_sensors-FAQ.html
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, see
http://secure.netroedge.com/~lm78/newdrivers.html for driver status.
Codice: Seleziona tutto
[b]i2c_i810 [/b] 4740 0
i2c_sis630 7308 0
i2c_dev 9216 0
i2c_isa 2176 0
i2c_via 4100 0
i2c_algo_bit 8584 2 i2c_i810,i2c_via
i2c_viapro 7696 0
i2c_acpi_ec 5760 0
i2c_sensor 3456 2 it87,eeprom
[b]i2c_i801 [/b] 8204 0
i2c_core 19728 10 i2c_sis630,i2c_dev,it87,i2c_isa,i2c_algo_bit,i2c_viapro,i2c_acpi_ec,eeprom,i2c_sensor,i2c_i801Codice: Seleziona tutto
eeprom-i2c-0-51
Adapter: SMBus I801 adapter at 0540
Memory type: DDR SDRAM DIMM
Memory size (MB): 256
eeprom-i2c-0-50
Adapter: SMBus I801 adapter at 0540
Memory type: DDR SDRAM DIMM
Memory size (MB): [b]16384[/b] ???
