smartmontools/grep Load_Cycle
- vmaxhenry
- Scoppiettante Seguace

- Messaggi: 484
- Iscrizione: domenica 19 febbraio 2006, 13:19
- Desktop: gnome
- Distribuzione: Ubuntu 16.04.2 LTS x86_64
- Sesso: Maschile
smartmontools/grep Load_Cycle
Ciao a tutti,
Ero incuriosito di vedere lo stato dei miei dischi rigidi.
Ho installato quindi "smartmontools" e come da wiki ho lanciato: "sudo smartctl -a /dev/sda | grep Load_Cycle_Count && sleep 300 && sudo smartctl -a /dev/sda | grep Load_Cycle_Count".
Con sorpresa ho notato che da terminale non mi restituiva alcun output.
Ho dato quindi "smartctl -a /dev/sda" e mi sono apparse tutte e quattro le normali sezioni monitorate da SMART.
Tutto sembra a posto tranne il fatto che nella terza sezione dove ci sono i parametri interni monitorati come ad es.Spin_Up_Time,Start_Stop_Count ,Reallocated_Sector_Ct ecc...non c'è quello che mi interessava di più cioè "Load_Cycle_Count".
Su entrambi i dischi (uno sata e l'altro IDE) non mi fa il monitoraggio di questo parametro.
Qualcuno da dirmi il perchè?
Grazie (b2b)
Ero incuriosito di vedere lo stato dei miei dischi rigidi.
Ho installato quindi "smartmontools" e come da wiki ho lanciato: "sudo smartctl -a /dev/sda | grep Load_Cycle_Count && sleep 300 && sudo smartctl -a /dev/sda | grep Load_Cycle_Count".
Con sorpresa ho notato che da terminale non mi restituiva alcun output.
Ho dato quindi "smartctl -a /dev/sda" e mi sono apparse tutte e quattro le normali sezioni monitorate da SMART.
Tutto sembra a posto tranne il fatto che nella terza sezione dove ci sono i parametri interni monitorati come ad es.Spin_Up_Time,Start_Stop_Count ,Reallocated_Sector_Ct ecc...non c'è quello che mi interessava di più cioè "Load_Cycle_Count".
Su entrambi i dischi (uno sata e l'altro IDE) non mi fa il monitoraggio di questo parametro.
Qualcuno da dirmi il perchè?
Grazie (b2b)
-
paologab
- Scoppiettante Seguace

- Messaggi: 367
- Iscrizione: mercoledì 20 agosto 2008, 9:35
- Località: Milano
Re: smartmontools/grep Load_Cycle
ciao,
credo dipenda dal produttore del disco e magari dalle versioni di smart, piuttosto che dal programma,
io ho un samsung nuovo e un maxtor di qualche anno e le info sche sputa smartmontool sono abbastanza diverse
credo dipenda dal produttore del disco e magari dalle versioni di smart, piuttosto che dal programma,
io ho un samsung nuovo e un maxtor di qualche anno e le info sche sputa smartmontool sono abbastanza diverse
- vmaxhenry
- Scoppiettante Seguace

- Messaggi: 484
- Iscrizione: domenica 19 febbraio 2006, 13:19
- Desktop: gnome
- Distribuzione: Ubuntu 16.04.2 LTS x86_64
- Sesso: Maschile
Re: smartmontools/grep Load_Cycle
A Te cosa ti restituisce il comando dal wiki:"sudo smartctl -a /dev/sda | grep Load_Cycle_Count && sleep 300 && sudo smartctl -a /dev/sda | grep Load_Cycle_Count"?
:-[
:-[
-
paologab
- Scoppiettante Seguace

- Messaggi: 367
- Iscrizione: mercoledì 20 agosto 2008, 9:35
- Località: Milano
Re: smartmontools/grep Load_Cycle
stasera provo e te lo posto
-
paologab
- Scoppiettante Seguace

- Messaggi: 367
- Iscrizione: mercoledì 20 agosto 2008, 9:35
- Località: Milano
Re: smartmontools/grep Load_Cycle
il samsung (SATA, quello più nuovo) esce subito senza restituire nulla
su questo c'è SO, dati utenti e partizioni per dati
il maxtor (il più vecchiotto, ATA133) usato per backup e per partizione di swap dà questo
ubuntu 8.10 64bit
ma a che serve sta cosa?
su questo c'è SO, dati utenti e partizioni per dati
il maxtor (il più vecchiotto, ATA133) usato per backup e per partizione di swap dà questo
Codice: Seleziona tutto
paolo@desktop:~$ sudo smartctl -a /dev/sdb | grep Load_Cycle_Count && sleep 300 && sudo smartctl -a /dev/sdb | grep Load_Cycle_Count
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0ma a che serve sta cosa?
- vmaxhenry
- Scoppiettante Seguace

- Messaggi: 484
- Iscrizione: domenica 19 febbraio 2006, 13:19
- Desktop: gnome
- Distribuzione: Ubuntu 16.04.2 LTS x86_64
- Sesso: Maschile
Re: smartmontools/grep Load_Cycle
Da wiky: http://wiki.ubuntu-it.org/Hardware/Disp ... ntoTestina
Volevo verificare anche io che fosse tutto ok come hai tu ma sembra per me impossibile :-[ :-[
Se qualcuno ha da suggerire qualcosa........ (b2b)
Volevo verificare anche io che fosse tutto ok come hai tu ma sembra per me impossibile :-[ :-[
Se qualcuno ha da suggerire qualcosa........ (b2b)
Codice: Seleziona tutto
enrico@cambusa:~$ sudo smartctl -a /dev/sdb
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3160815AS
Serial Number: 5RA8830Z
Firmware Version: 4.AAB
User Capacity: 160,041,885,696 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Jan 8 20:10:09 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 27
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 8398384
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 275
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 27
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 068 065 045 Old_age Always - 32 (Lifetime Min/Max 23/33)
194 Temperature_Celsius 0x0022 032 035 000 Old_age Always - 32 (0 22 0 0)
195 Hardware_ECC_Recovered 0x001a 080 076 000 Old_age Always - 91333653
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Ultima modifica di vmaxhenry il giovedì 8 gennaio 2009, 20:12, modificato 1 volta in totale.
-
paologab
- Scoppiettante Seguace

- Messaggi: 367
- Iscrizione: mercoledì 20 agosto 2008, 9:35
- Località: Milano
Re: smartmontools/grep Load_Cycle
qui sotto ti metto i miei. Probabilmente ogni produttore sceglie cosa rendere monitorabile
samsung con 4 mesi di vita
[/size]
e maxtor con qualche anno
samsung con 4 mesi di vita
Codice: Seleziona tutto
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 074 074 011 Pre-fail Always - 8500
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 435
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 271
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 435
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0
183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
184 Unknown_Attribute 0x0033 100 100 099 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 084 069 000 Old_age Always - 16 (Lifetime Min/Max 13/16)
194 Temperature_Celsius 0x0022 080 066 000 Old_age Always - 20 (Lifetime Min/Max 13/20)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 272066
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0
e maxtor con qualche anno
Codice: Seleziona tutto
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 203 202 063 Pre-fail Always - 16298
4 Start_Stop_Count 0x0032 251 251 000 Old_age Always - 3978
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 253 247 187 Pre-fail Always - 39116
9 Power_On_Minutes 0x0032 244 244 000 Old_age Always - 17h+52m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 243 243 000 Old_age Always - 4067
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 27
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 1189
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 11
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 5
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 195 191 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
Ultima modifica di paologab il venerdì 9 gennaio 2009, 8:16, modificato 1 volta in totale.
- vmaxhenry
- Scoppiettante Seguace

- Messaggi: 484
- Iscrizione: domenica 19 febbraio 2006, 13:19
- Desktop: gnome
- Distribuzione: Ubuntu 16.04.2 LTS x86_64
- Sesso: Maschile
Re: smartmontools/grep Load_Cycle
Grazie della consulenza. (b2b)
Una cosa però trovo strana tra i toui dischi e il mio che ha solo 20gg di vita:
7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 8398384195
195 Hardware_ECC_Recovered 0x001a 080 076 000 Old_age Always - 91333653
Non è che stò invecchiando precocemente in qualche strano e a me insaputo modo il mio HD?
Una cosa però trovo strana tra i toui dischi e il mio che ha solo 20gg di vita:
7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 8398384195
195 Hardware_ECC_Recovered 0x001a 080 076 000 Old_age Always - 91333653
Non è che stò invecchiando precocemente in qualche strano e a me insaputo modo il mio HD?
-
paologab
- Scoppiettante Seguace

- Messaggi: 367
- Iscrizione: mercoledì 20 agosto 2008, 9:35
- Località: Milano
Re: smartmontools/grep Load_Cycle
boh, per me è arabo, quasi
i pre fail diventano fail quando scendono sotto la soglia
per la voce 195 googleando qualcosa dovrebbe trovarsi
i pre fail diventano fail quando scendono sotto la soglia
per la voce 195 googleando qualcosa dovrebbe trovarsi
- templarios
- Scoppiettante Seguace

- Messaggi: 523
- Iscrizione: sabato 21 aprile 2007, 9:27
- Località: bellinzona.
Re: smartmontools/grep Load_Cycle
ciao
prova a vedere qui: http://affogandonellagranderete.blogspo ... ealth.html
è un interfaccia grafica per smart.
chi sa come interpretare i dati? quando ci si deve preoccupare?
prova a vedere qui: http://affogandonellagranderete.blogspo ... ealth.html
è un interfaccia grafica per smart.
chi sa come interpretare i dati? quando ci si deve preoccupare?
Nulla si crea, Nulla si distrugge, Tutto si trasforma.
La mente è come un paracadute. Funziona solo se si apre.
La mente è come un paracadute. Funziona solo se si apre.
Re: smartmontools/grep Load_Cycle
ciao a tutti!
Dopo aver fatto una scansione con smartmontools mi è uscita questa roba
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 214 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 214 occurred at disk power-on lifetime: 1325 hours (55 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 3f 97 02 e0 at LBA = 0x0002973f = 169791
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 97 02 e0 00 03:06:16.686 READ VERIFY SECTOR(S) EXT
42 00 00 3f 97 02 e0 00 03:06:13.593 READ VERIFY SECTOR(S) EXT
b0 d8 45 01 4f c2 e0 00 03:06:13.532 SMART ENABLE OPERATIONS
ef 03 45 01 00 00 e0 00 03:06:13.501 SET FEATURES [Set transfer mode]
ef 03 0c 01 00 00 e0 00 03:06:13.471 SET FEATURES [Set transfer mode]
Error 213 occurred at disk power-on lifetime: 1325 hours (55 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 3f 97 02 e0 at LBA = 0x0002973f = 169791
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 97 02 e0 00 03:06:10.119 READ VERIFY SECTOR(S) EXT
42 00 80 3f 97 02 e0 00 03:06:07.042 READ VERIFY SECTOR(S) EXT
25 00 01 00 00 00 e0 00 03:06:07.022 READ DMA EXT
b0 d8 45 01 4f c2 e0 00 03:06:06.962 SMART ENABLE OPERATIONS
ef 03 45 01 00 00 e0 00 03:06:06.931 SET FEATURES [Set transfer mode]
Error 212 occurred at disk power-on lifetime: 1325 hours (55 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 3f 97 02 e0 at LBA = 0x0002973f = 169791
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 97 02 e0 00 03:06:03.543 READ VERIFY SECTOR(S) EXT
42 00 00 3f 97 02 e0 00 03:06:00.453 READ VERIFY SECTOR(S) EXT
b0 d8 45 01 4f c2 e0 00 03:06:00.392 SMART ENABLE OPERATIONS
ef 03 45 01 00 00 e0 00 03:06:00.361 SET FEATURES [Set transfer mode]
ef 03 0c 01 00 00 e0 00 03:06:00.331 SET FEATURES [Set transfer mode]
Error 211 occurred at disk power-on lifetime: 1325 hours (55 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 3f 97 02 e0 at LBA = 0x0002973f = 169791
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 97 02 e0 00 03:05:56.976 READ VERIFY SECTOR(S) EXT
42 00 00 3f 97 02 e0 00 03:05:53.883 READ VERIFY SECTOR(S) EXT
b0 d8 45 01 4f c2 e0 00 03:05:53.822 SMART ENABLE OPERATIONS
ef 03 45 01 00 00 e0 00 03:05:53.791 SET FEATURES [Set transfer mode]
ef 03 0c 01 00 00 e0 00 03:05:53.761 SET FEATURES [Set transfer mode]
enrico@enrico-desktop:~$ sudo smartctl -a /dev/sdb2 | grep Load_Cycle_Count
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
chi la sa interpretare perfavore? cosa sono questi errori? >:(
Dopo aver fatto una scansione con smartmontools mi è uscita questa roba
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 214 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 214 occurred at disk power-on lifetime: 1325 hours (55 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 3f 97 02 e0 at LBA = 0x0002973f = 169791
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 97 02 e0 00 03:06:16.686 READ VERIFY SECTOR(S) EXT
42 00 00 3f 97 02 e0 00 03:06:13.593 READ VERIFY SECTOR(S) EXT
b0 d8 45 01 4f c2 e0 00 03:06:13.532 SMART ENABLE OPERATIONS
ef 03 45 01 00 00 e0 00 03:06:13.501 SET FEATURES [Set transfer mode]
ef 03 0c 01 00 00 e0 00 03:06:13.471 SET FEATURES [Set transfer mode]
Error 213 occurred at disk power-on lifetime: 1325 hours (55 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 3f 97 02 e0 at LBA = 0x0002973f = 169791
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 97 02 e0 00 03:06:10.119 READ VERIFY SECTOR(S) EXT
42 00 80 3f 97 02 e0 00 03:06:07.042 READ VERIFY SECTOR(S) EXT
25 00 01 00 00 00 e0 00 03:06:07.022 READ DMA EXT
b0 d8 45 01 4f c2 e0 00 03:06:06.962 SMART ENABLE OPERATIONS
ef 03 45 01 00 00 e0 00 03:06:06.931 SET FEATURES [Set transfer mode]
Error 212 occurred at disk power-on lifetime: 1325 hours (55 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 3f 97 02 e0 at LBA = 0x0002973f = 169791
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 97 02 e0 00 03:06:03.543 READ VERIFY SECTOR(S) EXT
42 00 00 3f 97 02 e0 00 03:06:00.453 READ VERIFY SECTOR(S) EXT
b0 d8 45 01 4f c2 e0 00 03:06:00.392 SMART ENABLE OPERATIONS
ef 03 45 01 00 00 e0 00 03:06:00.361 SET FEATURES [Set transfer mode]
ef 03 0c 01 00 00 e0 00 03:06:00.331 SET FEATURES [Set transfer mode]
Error 211 occurred at disk power-on lifetime: 1325 hours (55 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 3f 97 02 e0 at LBA = 0x0002973f = 169791
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 97 02 e0 00 03:05:56.976 READ VERIFY SECTOR(S) EXT
42 00 00 3f 97 02 e0 00 03:05:53.883 READ VERIFY SECTOR(S) EXT
b0 d8 45 01 4f c2 e0 00 03:05:53.822 SMART ENABLE OPERATIONS
ef 03 45 01 00 00 e0 00 03:05:53.791 SET FEATURES [Set transfer mode]
ef 03 0c 01 00 00 e0 00 03:05:53.761 SET FEATURES [Set transfer mode]
enrico@enrico-desktop:~$ sudo smartctl -a /dev/sdb2 | grep Load_Cycle_Count
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
chi la sa interpretare perfavore? cosa sono questi errori? >:(