[Video] La mia scheda VIA chrome9 HC IGP non funziona con ubuntu intrepid!!
[Video] La mia scheda VIA chrome9 HC IGP non funziona con ubuntu intrepid!!
Avrei proprio bisogno del vostro aiuto..
ho installato da poco ubuntu 8.10 e, non essendo un esperto di linux mi ero ripromesso di studiarci sopra un po'..
l'installazione (con modalità grafica sicura) è andata a buon fine, dopodichè, secondo la guida che ho trovato sulla wiki di Ubuntu riguardo all'installazione del driver unificato Via Tecnologies Inc per server grafico Xorg 7.4, ho installato i driver...
e fin qui, apparentemente, tutto bene..
al riavvio del sistema un messaggio di errore mi avvisa subito che ubuntu verrà avviato in modalità grafica ridotta.. e ovviamente di attivare l'accelerazione 3D neanche a parlrne.. mi sapete dire cosa sbaglio?
Grazie in anticipo..
ho installato da poco ubuntu 8.10 e, non essendo un esperto di linux mi ero ripromesso di studiarci sopra un po'..
l'installazione (con modalità grafica sicura) è andata a buon fine, dopodichè, secondo la guida che ho trovato sulla wiki di Ubuntu riguardo all'installazione del driver unificato Via Tecnologies Inc per server grafico Xorg 7.4, ho installato i driver...
e fin qui, apparentemente, tutto bene..
al riavvio del sistema un messaggio di errore mi avvisa subito che ubuntu verrà avviato in modalità grafica ridotta.. e ovviamente di attivare l'accelerazione 3D neanche a parlrne.. mi sapete dire cosa sbaglio?
Grazie in anticipo..
Re: [Video] La mia scheda VIA chrome9 HC IGP non funziona con ubuntu intrepid!!
proprio nemmeno un minimo di idee?
mi spiacerebbe abbandonare ubuntu solo per un problema come questo...
mi spiacerebbe abbandonare ubuntu solo per un problema come questo...
Re: [Video] La mia scheda VIA chrome9 HC IGP non funziona con ubuntu intrepid!!
Hai xcontrollato di avere sulla scheda madre un chip grafico supportato?icio84 ha scritto: proprio nemmeno un minimo di idee?
mi spiacerebbe abbandonare ubuntu solo per un problema come questo...
Posta l'output di
Codice: Seleziona tutto
sudo lshwDa regolamento (Sez. I punto 15) è vietato inviare messaggi privati per richieste di supporto tecnico, si prega di aprire una discussione nella giusta sezione.
Hai domande sul forum? Leggi le FAQ e il Regolamento.
→ → → → Partecipa alla documentazione ← ← ← ←
Hai domande sul forum? Leggi le FAQ e il Regolamento.
→ → → → Partecipa alla documentazione ← ← ← ←
Re: [Video] La mia scheda VIA chrome9 HC IGP non funziona con ubuntu intrepid!!
mah.. credo di sì.. anche sulla guida ufficiale di ubuntu c'è spiegato come fare per installarla con intrepid.. eppure ho seguito tutto passo per passo ma non ho ottenuto nulla, sempre lo stesso messaggio di errore.. comunque questo è l'output di lshw
Codice: Seleziona tutto
icio-linux-desktop
description: Desktop Computer
product: System Product Name
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 32 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
configuration: boot=normal chassis=desktop cpus=2 uuid=20AD08A8-8DFE-D511-AC94-001D608F57A6
*-core
description: Motherboard
product: P5VD2-VM SE
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev x.xx
serial: MB-1234567890
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 0507 (02/20/2008)
size: 64KiB
capacity: 448KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu:0
description: CPU
product: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.15.13
serial: 0000-06FD-0000-0000-0000-0000
slot: CPU 1
size: 2GHz
capacity: 2GHz
width: 64 bits
clock: 200MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe x86-64 constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm
configuration: id=1
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 32KiB
capacity: 32KiB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 1MiB
capacity: 1MiB
capabilities: pipeline-burst internal varies instruction
*-cache:2 DISABLED
description: L3 cache
physical id: 7
slot: L3-Cache
capabilities: internal
*-logicalcpu:0
description: Logical CPU
physical id: 1.1
width: 64 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 1.2
width: 64 bits
capabilities: logical
*-memory
description: System Memory
physical id: 26
slot: System board or motherboard
size: 1GiB
*-bank:0
description: DIMM [empty]
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
*-bank:1
description: DIMM Synchronous 667 MHz (1.5 ns)
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-cpu:1
physical id: 2
bus info: cpu@1
version: 6.15.13
serial: 0000-06FD-0000-0000-0000-0000
size: 2GHz
capabilities: ht
configuration: id=1
*-logicalcpu:0
description: Logical CPU
physical id: 1.1
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 1.2
capabilities: logical
*-pci:0
description: Host bridge
product: CN896/VN896/P4M900 Host Bridge
vendor: VIA Technologies, Inc.
physical id: 100
bus info: pci@0000:00:00.0
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-via latency=8 module=via_agp
*-system UNCLAIMED
description: PIC
product: CN896/VN896/P4M900 I/O APIC Interrupt Controller
vendor: VIA Technologies, Inc.
physical id: 0.5
bus info: pci@0000:00:00.5
version: 00
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: latency=0
*-pci:0
description: PCI bridge
product: VT8237/VX700 PCI Bridge
vendor: VIA Technologies, Inc.
physical id: 1
bus info: pci@0000:00:01.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci pm bus_master cap_list
*-display UNCLAIMED
description: VGA compatible controller
product: CN896/VN896/P4M900 [Chrome 9 HC]
vendor: VIA Technologies, Inc.
physical id: 0
bus info: pci@0000:01:00.0
version: 01
width: 32 bits
clock: 66MHz
capabilities: pm agp agp-3.0 bus_master cap_list
configuration: latency=64 mingnt=2
*-pci:1
description: PCI bridge
product: CN896/VN896/P4M900 PCI to PCI Bridge Controller
vendor: VIA Technologies, Inc.
physical id: 2
bus info: pci@0000:00:02.0
version: 80
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm msi ht bus_master cap_list
configuration: driver=pcieport-driver
*-pci:2
description: PCI bridge
product: CN896/VN896/P4M900 PCI to PCI Bridge Controller
vendor: VIA Technologies, Inc.
physical id: 3
bus info: pci@0000:00:03.0
version: 80
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm msi ht bus_master cap_list
configuration: driver=pcieport-driver
*-ide:0
description: IDE interface
product: VIA Technologies, Inc.
vendor: VIA Technologies, Inc.
physical id: f
bus info: pci@0000:00:0f.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: ide pm bus_master cap_list
configuration: driver=sata_via latency=64 module=sata_via
*-ide:1
description: IDE interface
product: VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
vendor: VIA Technologies, Inc.
physical id: f.1
bus info: pci@0000:00:0f.1
logical name: scsi2
version: 07
width: 32 bits
clock: 33MHz
capabilities: ide pm bus_master cap_list emulated
configuration: driver=pata_via latency=32 module=pata_via
*-disk:0
description: ATA Disk
product: ST3320620A
vendor: Seagate
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: 3.AA
serial: 9QF67E2H
size: 298GiB (320GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=80d14b8a
*-volume
description: Windows NTFS volume
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
version: 3.1
serial: ae7dbf35-1219-da4d-b545-15c917e85958
size: 117GiB
capacity: 117GiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2008-11-07 12:52:42 filesystem=ntfs state=clean
*-disk:1
description: ATA Disk
product: HDS728080PLAT20
physical id: 0.1.0
bus info: scsi@2:0.1.0
logical name: /dev/sdb
version: PF2O
serial: PFD855S5TBEDGJ
size: 76GiB (82GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=9c509c50
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.1.0,1
logical name: /dev/sdb1
logical name: /
logical name: /dev/.static/dev
version: 1.0
serial: 8f3e1946-7f05-4861-8324-51600f53aa0c
size: 74GiB
capacity: 74GiB
capabilities: primary journaled extended_attributes large_files huge_files recover ext3 ext2 initialized
configuration: created=2009-03-05 14:43:27 filesystem=ext3 modified=2009-03-06 11:17:13 mount.fstype=ext3 mount.options=ro,errors=remount-ro,data=ordered mounted=2009-03-06 11:17:13 state=mounted
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@2:0.1.0,2
logical name: /dev/sdb2
size: 2580MiB
capacity: 2580MiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sdb5
capacity: 2580MiB
capabilities: nofs
*-usb:0
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 10
bus info: pci@0000:00:10.0
version: b0
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=uhci_hcd latency=64 module=uhci_hcd
*-usb:1
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 10.1
bus info: pci@0000:00:10.1
version: b0
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=uhci_hcd latency=64 module=uhci_hcd
*-usb:2
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 10.2
bus info: pci@0000:00:10.2
version: b0
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=uhci_hcd latency=64 module=uhci_hcd
*-usb:3
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 10.3
bus info: pci@0000:00:10.3
version: b0
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=uhci_hcd latency=64 module=uhci_hcd
*-usb:4
description: USB Controller
product: USB 2.0
vendor: VIA Technologies, Inc.
physical id: 10.4
bus info: pci@0000:00:10.4
version: 90
width: 32 bits
clock: 33MHz
capabilities: pm debug bus_master cap_list
configuration: driver=ehci_hcd latency=64 module=ehci_hcd
*-isa
description: ISA bridge
product: VT8237S PCI to ISA Bridge
vendor: VIA Technologies, Inc.
physical id: 11
bus info: pci@0000:00:11.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: isa pm cap_list
configuration: latency=0
*-network
description: Ethernet interface
product: VT6102 [Rhine-II]
vendor: VIA Technologies, Inc.
physical id: 12
bus info: pci@0000:00:12.0
logical name: eth0
version: 7c
serial: 00:1d:60:8f:57:a6
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.4.3 duplex=half latency=64 link=no maxlatency=8 mingnt=3 module=via_rhine multicast=yes port=MII speed=10MB/s
*-pci:3
description: PCI bridge
product: VT8237A PCI to PCI Bridge
vendor: VIA Technologies, Inc.
physical id: 13.1
bus info: pci@0000:00:13.1
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci ht bus_master cap_list
*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 4
bus info: pci@0000:04:04.0
logical name: eth1
version: 10
serial: 00:0e:2e:02:55:19
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.2 latency=64 link=yes maxlatency=64 mingnt=32 module=8139too multicast=yes port=MII speed=100MB/s
*-usb:0
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 5
bus info: pci@0000:04:05.0
version: 61
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=uhci_hcd latency=64 module=uhci_hcd
*-usb:1
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 5.1
bus info: pci@0000:04:05.1
version: 61
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=uhci_hcd latency=64 module=uhci_hcd
*-usb:2
description: USB Controller
product: USB 2.0
vendor: VIA Technologies, Inc.
physical id: 5.2
bus info: pci@0000:04:05.2
version: 63
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=ehci_hcd latency=64 module=ehci_hcd
*-pci:1
description: Host bridge
product: CN896/VN896/P4M900 Host Bridge
vendor: VIA Technologies, Inc.
physical id: 101
bus info: pci@0000:00:00.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: CN896/VN896/P4M900 Host Bridge
vendor: VIA Technologies, Inc.
physical id: 102
bus info: pci@0000:00:00.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
description: Host bridge
product: CN896/VN896/P4M900 Host Bridge
vendor: VIA Technologies, Inc.
physical id: 103
bus info: pci@0000:00:00.3
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
description: Host bridge
product: CN896/VN896/P4M900 Host Bridge
vendor: VIA Technologies, Inc.
physical id: 104
bus info: pci@0000:00:00.4
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: CN896/VN896/P4M900 Security Device
vendor: VIA Technologies, Inc.
physical id: 105
bus info: pci@0000:00:00.6
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: CN896/VN896/P4M900 Host Bridge
vendor: VIA Technologies, Inc.
physical id: 106
bus info: pci@0000:00:00.7
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: VT8251 Ultra VLINK Controller
vendor: VIA Technologies, Inc.
physical id: 107
bus info: pci@0000:00:11.7
version: 00
width: 32 bits
clock: 33MHz
configuration: latency=128
*-pci:8
description: Host bridge
product: VT8237A Host Bridge
vendor: VIA Technologies, Inc.
physical id: 108
bus info: pci@0000:00:13.0
version: 00
width: 32 bits
clock: 33MHz
*-multimedia
description: Audio device
product: VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller)
vendor: VIA Technologies, Inc.
physical id: 1
bus info: pci@0000:80:01.0
version: 10
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=HDA Intel latency=0 module=snd_hda_intel
*-scsi:0
physical id: 3
bus info: usb@7:1
logical name: scsi6
capabilities: emulated scsi-host
configuration: driver=usb-storage
*-disk
description: SCSI Disk
product: Y080L0
vendor: Maxtor 6
physical id: 0.0.0
bus info: scsi@6:0.0.0
logical name: /dev/sdc
version: YAR4
size: 76GiB (81GB)
capabilities: partitioned partitioned:dos
configuration: signature=39130214
*-volume
description: Windows FAT volume
vendor: MSWIN4.1
physical id: 1
bus info: scsi@6:0.0.0,1
logical name: /dev/sdc1
logical name: /media/80 GB HDD
version: FAT32
serial: 74c0-22ac
size: 76GiB
capacity: 76GiB
capabilities: primary fat initialized
configuration: FATs=2 filesystem=fat label=V���^ mount.fstype=vfat mount.options=rw,nosuid,nodev,uid=1000,fmask=0077,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,flush state=mounted
*-scsi:1
physical id: 5
bus info: usb@7:2
logical name: scsi7
capabilities: emulated scsi-host
configuration: driver=usb-storage
*-cdrom
description: DVD-RAM writer
product: CDDVDW SE-S224Q
vendor: TSSTcorp
physical id: 0.0.0
bus info: scsi@7:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrom1
logical name: /dev/cdrw
logical name: /dev/cdrw1
logical name: /dev/dvd
logical name: /dev/dvd1
logical name: /dev/dvdrw
logical name: /dev/dvdrw1
logical name: /dev/scd0
logical name: /dev/sr0
version: TS00
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: status=nodisc
*-scsi:2
physical id: 6
bus info: usb@5:2
logical name: scsi8
capabilities: emulated scsi-host
configuration: driver=usb-storage
*-disk
description: SCSI Disk
product: DCP-117C
vendor: Brother
physical id: 0.0.0
bus info: scsi@8:0.0.0
logical name: /dev/sdd
version: 1.00
capabilities: removable
configuration: ansiversion=2
*-medium
physical id: 0
logical name: /dev/sdd
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: pan0
serial: d6:94:99:dc:ee:b5
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
Ultima modifica di Devnull il venerdì 6 marzo 2009, 16:45, modificato 1 volta in totale.
Re: [Video] La mia scheda VIA chrome9 HC IGP non funziona con ubuntu intrepid!!
La tua scheda è supportata.
La cosa più logica da fare è controllare il file /etc/X11/xorg.conf e verificare che alla Section "Device" sia presente la riga
Driver "via"
La cosa più logica da fare è controllare il file /etc/X11/xorg.conf e verificare che alla Section "Device" sia presente la riga
Driver "via"
Da regolamento (Sez. I punto 15) è vietato inviare messaggi privati per richieste di supporto tecnico, si prega di aprire una discussione nella giusta sezione.
Hai domande sul forum? Leggi le FAQ e il Regolamento.
→ → → → Partecipa alla documentazione ← ← ← ←
Hai domande sul forum? Leggi le FAQ e il Regolamento.
→ → → → Partecipa alla documentazione ← ← ← ←
Re: [Video] La mia scheda VIA chrome9 HC IGP non funziona con ubuntu intrepid!!
Questo è il contenuto del file xorg.conf
(come faccio a fare la finestrella del codice? Scusami..)
(come faccio a fare la finestrella del codice? Scusami..)
Codice: Seleziona tutto
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Driver "via"
VendorName "VIA Tech"
BoardName "via"
#Option "PanelID" "0" #640x480, Single, Dithering
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Monitor"
ModeLine "720x480" 26.7 720 736 808 896 480 481 484 497
ModeLine "720x576" 32.7 720 744 816 912 576 577 580 597
ModeLine "800x480" 29.58 800 816 896 992 480 481 484 497
ModeLine "848x480" 31.5 848 864 952 1056 480 481 484 497
ModeLine "856x480" 31.7 856 872 960 1064 480 481 484 497
ModeLine "960x600" 45.98 960 1000 1096 1232 600 601 604 622 -HSync +Vsync
ModeLine "1000x600" 48.07 1000 1040 1144 1288 600 601 604 622 -HSync +Vsync
ModeLine "1024x512" 41.3 1024 1056 1160 1296 512 513 516 531
ModeLine "1088x612" 52.95 1088 1128 1240 1392 612 613 616 634 -HSync +Vsync
ModeLine "1152x720" 67.32 1152 1208 1328 1504 720 721 724 746 -HSync +Vsync
ModeLine "1200x720" 70.18 1200 1256 1384 1568 720 721 724 746 -HSync +Vsync
ModeLine "1280x600" 61.50 1280 1336 1464 1648 600 601 604 622 -HSync +Vsync
ModeLine "1280x720" 74.6 1280 1341 1474 1688 720 721 724 746
ModeLine "1280x768" 80.1 1280 1344 1480 1680 768 769 772 795
ModeLine "1360x768" 85.50 1360 1392 1712 1744 768 783 791 807 +HSync +Vsync
ModeLine "1366x768" 85.86 1366 1440 1584 1800 768 769 772 795 -HSync +Vsync
ModeLine "1440x900" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
ModeLine "1440x1050" 126.2 1440 1536 1688 1936 1050 1051 1054 1087
ModeLine "1600x900" 119.00 1600 1696 1864 2128 900 901 904 932 -HSync +Vsync
ModeLine "1600x1024" 136.36 1600 1704 1872 2144 1024 1025 1028 1060 -HSync +Vsync
ModeLine "1792x1344" 202.97 1792 1920 2112 2432 1344 1345 1348 1391 -HSync +Vsync
ModeLine "1856x1392" 218.57 1856 1992 2192 2528 1392 1393 1396 1441 -HSync +Vsync
ModeLine "1920x1080" 172.9 1920 2043 2249 2578 1080 1081 1084 1118
ModeLine "2048x1536" 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -HSync +Vsync
ModeLine "720x480" 34.9 720 752 824 928 480 481 484 502
ModeLine "720x576" 42.6 720 760 832 944 576 577 580 602
ModeLine "848x480" 41.0 848 880 968 1088 480 481 484 502
ModeLine "856x480" 41.3 856 888 976 1096 480 481 484 502
ModeLine "1024x512" 53.3 1024 1072 1176 1328 512 513 516 535
ModeLine "1280x768" 103.0 1280 1360 1496 1712 768 769 772 802
ModeLine "1440x1050" 160.0 1440 1536 1696 1952 1050 1051 1054 1096
ModeLine "1280x768" 118.5 1280 1368 1504 1728 768 769 772 807
ModeLine "1440x1050" 184.5 1440 1544 1704 1968 1050 1051 1054 1103
ModeLine "848x480" 47.4 848 888 976 1104 480 481 484 505
EndSection
Section "Screen"
Monitor "Monitor"
SubSection "Display"
Modes "1024x768"
Virtual 1024 768
Depth 24
EndSubSection
SubSection "Display"
Modes "1024x768"
Virtual 1024 768
Depth 24
EndSubSection
Identifier "Default Screen"
Device "Configured Video Device"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "extmod"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "ServerLayout"
Option "RandR" "False"
EndSection
Ultima modifica di Devnull il venerdì 6 marzo 2009, 19:28, modificato 1 volta in totale.
Re: [Video] La mia scheda VIA chrome9 HC IGP non funziona con ubuntu intrepid!!
e questo è il contenuto del file compiz, se serve...
Codice: Seleziona tutto
#!/bin/sh
# Compiz Manager wrapper script
#
# Copyright (c) 2007 Kristian Lyngstøl <kristian@bohemians.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
#
# Contributions by: Treviño (3v1n0) <trevi55@gmail.com>, Ubuntu Packages
##!/bin/sh
# Compiz Manager wrapper script
#
# Copyright (c) 2007 Kristian Lyngstøl <kristian@bohemians.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# Much of this code is based on Beryl code, also licensed under the GPL.
# This script will detect what options we need to pass to compiz to get it
# started, and start a default plugin and possibly window decorator.
#
COMPIZ_BIN_PATH="/usr/local/bin/" # For window decorators and compiz
PLUGIN_PATH="/usr/local/lib/compiz/"
GLXINFO="/usr/bin/glxinfo"
KWIN="/usr/bin/kwin"
METACITY="/usr/bin/metacity"
COMPIZ_NAME="compiz" # Final name for compiz (compiz.real)
# For Xgl LD_PRELOAD
LIBGL_NVIDIA="/usr/lib/nvidia/libGL.so.1.2.xlibmesa"
LIBGL_FGLRX="/usr/lib/fglrx/libGL.so.1.2.xlibmesa"
# Minimum amount of memory (in kilo bytes) that nVidia cards need
# to be allowed to start
# Set to 262144 to require 256MB
NVIDIA_MEMORY="65536" # 64MB
NVIDIA_SETTINGS="nvidia-settings" # Assume it's in the path by default
# For detecting what driver is in use, the + is for one or more /'s
XORG_DRIVER_PATH="/usr/lib/xorg/modules/drivers/+"
if [ -x $METACITY ]; then
FALLBACKWM="${METACITY}"
elif [ -x $KWIN ]; then
FALLBACKWM="${KWIN}"
else
FALLBACKWM=true
fi
FALLBACKWM_OPTIONS="--replace $@"
# Driver whitelist
WHITELIST="nvidia intel ati radeon i810 via fglrx"
# blacklist based on the pci ids
# See http://wiki.compiz-fusion.org/Hardware/Blacklist for details
#T=" 1002:5954 1002:5854 1002:5955" # ati rs480
#T="$T 1002:4153" # ATI Rv350
#T="$T 1002:3152 1002:3150 1002:5462 1002:5653 " # ati X300 X600,X600 X700
T="8086:1132" # intel i815 (LP: #221920)
T="$T 8086:2e02 " # Intel Eaglelake
T="$T 8086:3577 8086:2562" # Intel 830MG, 845G (LP: #259385)
BLACKLIST_PCIIDS="$T"
unset T
COMPIZ_OPTIONS="--ignore-desktop-hints --replace"
COMPIZ_PLUGINS="core"
ENV=""
# Use emerald by default if it exist
USE_EMERALD="yes"
# No indirect by default
INDIRECT="no"
# Default X.org log if xset q doesn't reveal it
XORG_DEFAULT_LOG="/var/log/Xorg.0.log"
# Set to yes to enable verbose
VERBOSE="yes"
# Echos the arguments if verbose
verbose()
{
if [ "x$VERBOSE" = "xyes" ]; then
printf "$*"
fi
}
# abort script and run fallback windowmanager
abort_with_fallback_wm()
{
if [ "x$SKIP_CHECKS" = "xyes" ]; then
verbose "SKIP_CHECKS is yes, so continuing despite problems.\n"
return 0;
fi
if [ "x$CM_DRY" = "xyes" ]; then
verbose "Dry run failed: Problems detected with 3D support.'n"
exit 1;
fi
verbose "aborting and using fallback: $FALLBACKWM \n"
if [ -x $FALLBACKWM ]; then
exec $FALLBACKWM $FALLBACKWM_OPTIONS
else
printf "no $FALLBACKWM found, exiting\n"
exit 1
fi
}
# Check if we run with the Software Rasterizer, this happens e.g.
# when a second screen session is opened via f-u-a on intel
check_software_rasterizer()
{
verbose "Checking for Software Rasterizer: "
if glxinfo 2> /dev/null | egrep -q '^OpenGL renderer string: Software Rasterizer' ; then
verbose "present. \n";
return 0;
else
verbose "Not present. \n"
return 1;
fi
}
# Check for non power of two texture support
check_npot_texture()
{
verbose "Checking for non power of two support: "
if glxinfo 2> /dev/null | egrep -q '(GL_ARB_texture_non_power_of_two|GL_NV_texture_rectangle|GL_EXT_texture_rectangle|GL_ARB_texture_rectangle)' ; then
verbose "present. \n";
return 0;
else
verbose "Not present. \n"
return 1;
fi
}
# Check for presence of FBConfig
check_fbconfig()
{
verbose "Checking for FBConfig: "
if [ "$INDIRECT" = "yes" ]; then
$GLXINFO -i | grep -q GLX.*fbconfig
FB=$?
else
$GLXINFO | grep -q GLX.*fbconfig
FB=$?
fi
if [ $FB = "0" ]; then
unset FB
verbose "present. \n"
return 0;
else
unset FB
verbose "not present. \n"
return 1;
fi
}
# Check for TFP
check_tfp()
{
verbose "Checking for texture_from_pixmap: "
if [ $($GLXINFO 2>/dev/null | grep GLX_EXT_texture_from_pixmap -c) -gt 2 ] ; then
verbose "present. \n"
return 0;
else
verbose "not present. \n"
if [ "$INDIRECT" = "yes" ]; then
unset LIBGL_ALWAYS_INDIRECT
INDIRECT="no"
return 1;
else
verbose "Trying again with indirect rendering:\n";
INDIRECT="yes"
export LIBGL_ALWAYS_INDIRECT=1
check_tfp;
return $?
fi
fi
}
# Check wether the composite extension is present
check_composite()
{
verbose "Checking for Composite extension: "
if xdpyinfo -queryExtensions | grep -q Composite ; then
verbose "present. \n";
return 0;
else
verbose "not present. \n";
return 1;
fi
}
# Detects if Xgl is running
check_xgl()
{
verbose "Checking for Xgl: "
if xvinfo | grep -q Xgl ; then
verbose "present. \n"
return 0;
else
verbose "not present. \n"
return 1;
fi
}
# Check if the nVidia card has enough video ram to make sense
check_nvidia_memory()
{
if [ ! -x "$NVIDIA_SETTINGS" ]; then
return 0
fi
MEM=$(${NVIDIA_SETTINGS} -q VideoRam | egrep Attribute\ \'VideoRam\'\ .*: | cut -d: -f3 | sed 's/[^0-9]//g')
if [ $MEM -lt $NVIDIA_MEMORY ]; then
verbose "Less than ${NVIDIA_MEMORY}kb of memory and nVidia";
return 1;
fi
return 0;
}
# Check for existence if NV-GLX
check_nvidia()
{
if [ ! -z $NVIDIA_INTERNAL_TEST ]; then
return $NVIDIA_INTERNAL_TEST;
fi
verbose "Checking for nVidia: "
if xdpyinfo | grep -q NV-GLX ; then
verbose "present. \n"
NVIDIA_INTERNAL_TEST=0
return 0;
else
verbose "not present. \n"
NVIDIA_INTERNAL_TEST=1
return 1;
fi
}
# Check if the max texture size is large enough compared to the resolution
check_texture_size()
{
TEXTURE_LIMIT=$(glxinfo -l | grep GL_MAX_TEXTURE_SIZE | sed 's/.*=[^0-9]//g')
RESOLUTION=$(xdpyinfo | grep -i dimensions: | sed 's/[^0-9]*pixels.*(.*).*//' | sed 's/[^0-9x]*//')
VRES=$(echo $RESOLUTION | sed 's/.*x//')
HRES=$(echo $RESOLUTION | sed 's/x.*//')
verbose "Comparing resolution ($RESOLUTION) to maximum 3D texture size ($TEXTURE_LIMIT): ";
if [ $VRES -gt $TEXTURE_LIMIT ] || [ $HRES -gt $TEXTURE_LIMIT ]; then
verbose "Failed.\n"
return 1;
fi
verbose "Passed.\n"
return 0
}
# check driver whitelist
running_under_whitelisted_driver()
{
LOG=$(xset q|grep "Log file"|awk '{print $3}')
if [ "$LOG" = "" ]; then
verbose "xset q doesn't reveal the location of the log file. Using fallback $XORG_DEFAULT_LOG \n"
LOG=$XORG_DEFAULT_LOG;
fi
if [ -z "$LOG" ];then
verbose "AIEEEEH, no Log file found \n"
verbose "$(xset q) \n"
return 0
fi
for DRV in ${WHITELIST}; do
if egrep -q "Loading ${XORG_DRIVER_PATH}${DRV}_drv\.so" $LOG &&
! egrep -q "Unloading ${XORG_DRIVER_PATH}${DRV}_drv\.so" $LOG;
then
return 0
fi
done
verbose "No whitelisted driver found\n"
return 1
}
# check pciid blacklist
have_blacklisted_pciid()
{
OUTPUT=$(lspci -n)
for ID in ${BLACKLIST_PCIIDS}; do
if echo "$OUTPUT" | egrep -q "$ID"; then
verbose "Blacklisted PCIID '$ID' found \n"
return 0
fi
done
OUTPUT=$(lspci -vn | grep -i VGA)
verbose "Detected PCI ID for VGA: $OUTPUT\n"
return 1
}
build_env()
{
if check_nvidia; then
ENV="__GL_YIELD=NOTHING "
fi
if [ "$INDIRECT" = "yes" ]; then
ENV="$ENV LIBGL_ALWAYS_INDIRECT=1 "
fi
if check_xgl; then
if [ -f ${LIBGL_NVIDIA} ]; then
ENV="$ENV LD_PRELOAD=${LIBGL_NVIDIA}"
verbose "Enabling Xgl with nVidia drivers...\n"
fi
if [ -f ${LIBGL_FGLRX} ]; then
ENV="$ENV LD_PRELOAD=${LIBGL_FGLRX}"
verbose "Enabling Xgl with fglrx ATi drivers...\n"
fi
fi
ENV="$ENV FROM_WRAPPER=yes"
if [ -n "$ENV" ]; then
export $ENV
fi
}
build_args()
{
if [ "x$INDIRECT" = "xyes" ]; then
COMPIZ_OPTIONS="$COMPIZ_OPTIONS --indirect-rendering "
fi
if check_nvidia; then
if [ "x$INDIRECT" != "xyes" ]; then
COMPIZ_OPTIONS="$COMPIZ_OPTIONS --loose-binding"
fi
fi
}
####################
# Execution begins here.
# Read configuration from XDG paths
if [ -z "$XDG_CONFIG_DIRS" ]; then
test -f /etc/xdg/compiz/compiz-manager && . /etc/xdg/compiz/compiz-manager
else
OLD_IFS=$IFS
IFS=:
for CONFIG_DIR in $XDG_CONFIG_DIRS
do
test -f $CONFIG_DIR/compiz/compiz-manager && . $CONFIG_DIR/compiz/compiz-manager
done
IFS=$OLD_IFS
unset OLD_IFS
fi
if [ -z "$XDG_CONFIG_HOME" ]; then
test -f $HOME/.config/compiz/compiz-manager && . $HOME/.config/compiz/compiz-manager
else
test -f $XDG_CONFIG_HOME/compiz/compiz-manager && . $XDG_CONFIG_HOME/compiz/compiz-manager
fi
# Don't use compiz when running the failsafe session
if [ "x$GNOME_DESKTOP_SESSION_ID" = "xFailsafe" ]; then
abort_with_fallback_wm
fi
if [ "x$LIBGL_ALWAYS_INDIRECT" = "x1" ]; then
INDIRECT="yes";
fi
# if we run under Xgl, we can skip some tests here
if ! check_xgl; then
# if vesa or vga are in use, do not even try glxinfo (LP#119341)
if ! running_under_whitelisted_driver || have_blacklisted_pciid; then
abort_with_fallback_wm
fi
# check if we have the required bits to run compiz and if not,
# fallback
if ! check_tfp || ! check_npot_texture || ! check_composite || ! check_texture_size; then
abort_with_fallback_wm
fi
# check if we run with software rasterizer and if so, bail out
if check_software_rasterizer; then
verbose "Software rasterizer detected, aborting"
abort_with_fallback_wm
fi
if check_nvidia && ! check_nvidia_memory; then
abort_with_fallback_wm
fi
if ! check_fbconfig; then
abort_with_fallback_wm
fi
fi
# load the ccp plugin if present and fallback to plain gconf if not
if [ -f ${PLUGIN_PATH}libccp.so ]; then
COMPIZ_PLUGINS="$COMPIZ_PLUGINS ccp"
elif [ -f ${PLUGIN_PATH}libgconf.so ]; then
COMPIZ_PLUGINS="$COMPIZ_PLUGINS glib gconf"
fi
# get environment
build_env
build_args
if [ "x$CM_DRY" = "xyes" ]; then
verbose "Dry run finished: everything should work with regards to Compiz and 3D.\n"
exit 0;
fi
${COMPIZ_BIN_PATH}${COMPIZ_NAME} $COMPIZ_OPTIONS "$@" $COMPIZ_PLUGINS || exec $FALLBACKWM $FALLBACKWM_OPTIONS
Ultima modifica di Devnull il venerdì 6 marzo 2009, 19:30, modificato 1 volta in totale.
- DnaX
- Prode Principiante
- Messaggi: 237
- Iscrizione: domenica 7 ottobre 2007, 23:47
- Desktop: GNOME Shell
- Distribuzione: Ubuntu 12.04 LTS 32bit
- Località: Pisa
- Contatti:
Re: [Video] La mia scheda VIA chrome9 HC IGP non funziona con ubuntu intrepid!!
Piccola domanda... ma prima di fare la guida ti funzionava? Per quanto ne so il supporto per la tua scheda è molto precario, ci sono i driver unichrome ma tutto questo Ubuntu lo dovrebbe fare in automatico.icio84 ha scritto: Avrei proprio bisogno del vostro aiuto..
ho installato da poco ubuntu 8.10 e, non essendo un esperto di linux mi ero ripromesso di studiarci sopra un po'..
l'installazione (con modalità grafica sicura) è andata a buon fine, dopodichè, secondo la guida che ho trovato sulla wiki di Ubuntu riguardo all'installazione del driver unificato Via Tecnologies Inc per server grafico Xorg 7.4, ho installato i driver...
e fin qui, apparentemente, tutto bene..
al riavvio del sistema un messaggio di errore mi avvisa subito che ubuntu verrà avviato in modalità grafica ridotta.. e ovviamente di attivare l'accelerazione 3D neanche a parlrne.. mi sapete dire cosa sbaglio?
Grazie in anticipo..
In ogni caso (a parte che la roba relativa a Compiz non serve a nulla), posta il contenuto di /var/log/Xorg.0.log e mettilo nei tag code.
Re: [Video] La mia scheda VIA chrome9 HC IGP non funziona con ubuntu intrepid!!
Modifica, se non l'hai fatto, il file /usr/bin/compiz come spiegato nella guida
/Hardware/Video/Via/ViaUnified
Inoltre c'è una riga in xorg.conf che mi sembra sospetta.
E' questa:.
/Hardware/Video/Via/ViaUnified
Inoltre c'è una riga in xorg.conf che mi sembra sospetta.
E' questa:
Modificala inSection "DRI"
Group 0
Mode 0666
Riavvia il pc e vedi se ti da l'accelerazione 3d con il comandoSection "DRI"
Mode 0666
Codice: Seleziona tutto
glxinfo
Ultima modifica di Devnull il venerdì 6 marzo 2009, 20:12, modificato 1 volta in totale.
Da regolamento (Sez. I punto 15) è vietato inviare messaggi privati per richieste di supporto tecnico, si prega di aprire una discussione nella giusta sezione.
Hai domande sul forum? Leggi le FAQ e il Regolamento.
→ → → → Partecipa alla documentazione ← ← ← ←
Hai domande sul forum? Leggi le FAQ e il Regolamento.
→ → → → Partecipa alla documentazione ← ← ← ←
Re: [Video] La mia scheda VIA chrome9 HC IGP non funziona con ubuntu intrepid!!
ciao, o per le mani un portatile con questa scheda video:
VGA compatible controller: VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] (rev 01)
e con ubuntu jaunty funziona decentemente, e soprattutto va al primo colpo,senza toccare niente. Nel caso fosse ancora utile.....
VGA compatible controller: VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] (rev 01)
e con ubuntu jaunty funziona decentemente, e soprattutto va al primo colpo,senza toccare niente. Nel caso fosse ancora utile.....
«Dice fai così e così e vedi se c'è da qualche parte (!) la riga... se non c'è aggiungila... A chi? Ma se mi sono presentato come "meno che neofita"! Scusa dav2dev, ma tu così spaventi la gente!»
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 10 ospiti

