vi posto anche una parte di dmesg,inoltre vi chiederei di indicarmi dei comandi per vedere se e' un problema del so o della macchina
Codice: Seleziona tutto
0.020455] SMP alternatives: switching to UP code
[ 0.026274] Freeing SMP alternatives: 11k freed
[ 0.026279] ACPI: Core revision 20080609
[ 0.029172] ACPI: Checking initramfs for custom DSDT
[ 0.452253] ENABLING IO-APIC IRQs
[ 0.456187] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.495871] CPU0: AMD Turion(tm) 64 Mobile Technology ML-32 stepping 02
[ 0.496031] Brought up 1 CPUs
[ 0.496031] Total of 1 processors activated (3589.50 BogoMIPS).
[ 0.496031] CPU0 attaching NULL sched-domain.
[ 0.496031] net_namespace: 840 bytes
[ 0.496031] Booting paravirtualized kernel on bare hardware
[ 0.496031] Time: 11:38:36 Date: 03/26/09
[ 0.496031] NET: Registered protocol family 16
[ 0.496031] EISA bus registered
[ 0.496031] ACPI: bus type pci registered
[ 0.496031] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7
[ 0.496031] PCI: MCFG area at e0000000 reserved in E820
[ 0.496031] PCI: Using MMCONFIG for extended config space
[ 0.496031] PCI: Using configuration type 1 for base access
[ 0.496031] ACPI: EC: Look up EC in DSDT
[ 0.497432] ACPI: Interpreter enabled
[ 0.497437] ACPI: (supports S0 S3 S4 S5)
[ 0.497453] ACPI: Using IOAPIC for interrupt routing
[ 0.501167] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.580676] ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
[ 0.580679] ACPI: EC: driver started in interrupt mode
[ 0.580725] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.580867] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.580871] pci 0000:00:04.0: PME# disabled
[ 0.580933] PCI: 0000:00:13.0 reg 10 32bit mmio: [b0000000, b0000fff]
[ 0.581041] PCI: 0000:00:13.1 reg 10 32bit mmio: [b0001000, b0001fff]
[ 0.581160] PCI: 0000:00:13.2 reg 10 32bit mmio: [b0002000, b0002fff]
[ 0.581242] pci 0000:00:13.2: supports D1
[ 0.581244] pci 0000:00:13.2: supports D2
[ 0.581247] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.581252] pci 0000:00:13.2: PME# disabled
[ 0.581297] PCI: 0000:00:14.0 reg 10 io port: [8400, 840f]
[ 0.581306] PCI: 0000:00:14.0 reg 14 32bit mmio: [b0003000, b00033ff]
[ 0.581351] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.581409] PCI: 0000:00:14.1 reg 10 io port: [8430, 8437]
[ 0.581418] PCI: 0000:00:14.1 reg 14 io port: [8424, 8427]
[ 0.581427] PCI: 0000:00:14.1 reg 18 io port: [8428, 842f]
[ 0.581436] PCI: 0000:00:14.1 reg 1c io port: [8420, 8423]
[ 0.581445] PCI: 0000:00:14.1 reg 20 io port: [8410, 841f]
[ 0.581639] PCI: 0000:00:14.5 reg 10 32bit mmio: [b0003400, b00034ff]
[ 0.581746] PCI: 0000:00:14.6 reg 10 32bit mmio: [b0003800, b00038ff]
[ 0.581909] PCI: 0000:01:05.0 reg 10 32bit mmio: [c0000000, cfffffff]
[ 0.581914] PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff]
[ 0.581918] PCI: 0000:01:05.0 reg 18 32bit mmio: [b0100000, b010ffff]
[ 0.581928] PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.581939] pci 0000:01:05.0: supports D1
[ 0.581941] pci 0000:01:05.0: supports D2
[ 0.581956] PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
[ 0.581960] PCI: bridge 0000:00:01.0 32bit mmio: [b0100000, b01fffff]
[ 0.581964] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
[ 0.582022] PCI: bridge 0000:00:04.0 io port: [0, fff]
[ 0.582025] PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
[ 0.582065] PCI: 0000:06:02.0 reg 10 32bit mmio: [b0204000, b0205fff]
[ 0.582174] PCI: 0000:06:04.0 reg 10 32bit mmio: [b0208000, b0208fff]
[ 0.582215] pci 0000:06:04.0: supports D1
[ 0.582217] pci 0000:06:04.0: supports D2
[ 0.582220] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.582226] pci 0000:06:04.0: PME# disabled
[ 0.582276] PCI: 0000:06:04.2 reg 10 32bit mmio: [b0209000, b02097ff]
[ 0.582288] PCI: 0000:06:04.2 reg 14 32bit mmio: [b0200000, b0203fff]
[ 0.582372] pci 0000:06:04.2: supports D1
[ 0.582374] pci 0000:06:04.2: supports D2
[ 0.582376] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.582383] pci 0000:06:04.2: PME# disabled
[ 0.582429] PCI: 0000:06:04.3 reg 10 32bit mmio: [b0206000, b0207fff]
[ 0.582517] pci 0000:06:04.3: supports D1
[ 0.582519] pci 0000:06:04.3: supports D2
[ 0.582521] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.582527] pci 0000:06:04.3: PME# disabled
[ 0.582574] PCI: 0000:06:04.4 reg 10 32bit mmio: [b020a000, b020a0ff]
[ 0.582585] PCI: 0000:06:04.4 reg 14 32bit mmio: [b0209c00, b0209cff]
[ 0.582596] PCI: 0000:06:04.4 reg 18 32bit mmio: [b0209800, b02098ff]
[ 0.582668] pci 0000:06:04.4: supports D1
[ 0.582669] pci 0000:06:04.4: supports D2
[ 0.582672] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
[ 0.582678] pci 0000:06:04.4: PME# disabled
[ 0.582732] PCI: 0000:06:06.0 reg 10 io port: [a000, a0ff]
[ 0.582743] PCI: 0000:06:06.0 reg 14 32bit mmio: [b020a400, b020a4ff]
[ 0.582822] pci 0000:06:06.0: supports D1
[ 0.582824] pci 0000:06:06.0: supports D2
[ 0.582826] pci 0000:06:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.582832] pci 0000:06:06.0: PME# disabled
[ 0.582885] pci 0000:00:14.4: transparent bridge
[ 0.582893] PCI: bridge 0000:00:14.4 io port: [a000, afff]
[ 0.582899] PCI: bridge 0000:00:14.4 32bit mmio: [b0200000, b02fffff]
[ 0.582942] bus 00 -> node 0
[ 0.582948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.583115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.583264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.583424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.585942] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.586073] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.586203] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.586331] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.586460] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.586588] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.586717] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.586845] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.587011] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.587048] pnp: PnP ACPI init
[ 0.587056] ACPI: bus type pnp registered
[ 0.589292] pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589297] pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589301] pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589305] pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589309] pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589313] pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589316] pnp 00:08: io resource (0x870-0x87f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589320] pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589324] pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589328] pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589332] pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589336] pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589340] pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589344] pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589348] pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589352] pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589356] pnp 00:08: io resource (0x280-0x293) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
[ 0.589551] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
[ 0.589555] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
[ 0.589569] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[ 0.612109] pnp: PnP ACPI: found 10 devices
[ 0.612111] ACPI: ACPI bus type pnp unregistered
[ 0.612115] PnPBIOS: Disabled by ACPI PNP
[ 0.612457] PCI: Using ACPI for IRQ routing
[ 0.612464] pci 0000:00:04.0: BAR 7: can't allocate resource
[ 0.612467] pci 0000:00:04.0: BAR 8: can't allocate resource
[ 0.612614] NET: Registered protocol family 8
[ 0.612614] NET: Registered protocol family 20
[ 0.612614] NetLabel: Initializing
[ 0.612614] NetLabel: domain hash size = 128
[ 0.612614] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.612614] NetLabel: unlabeled traffic allowed by default
[ 0.612614] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.612614] actual entries 65620
[ 0.612614] AppArmor: AppArmor Filesystem Enabled
[ 0.612632] ACPI: RTC can wake from S4
[ 0.612639] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.612639] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.612639] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.612639] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.612639] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.612639] system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.648346] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.648350] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.648354] pci 0000:00:01.0: MEM window: 0xb0100000-0xb01fffff
[ 0.648358] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.648363] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.648365] pci 0000:00:04.0: IO window: disabled
[ 0.648369] pci 0000:00:04.0: MEM window: disabled
[ 0.648372] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.648379] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07
[ 0.648382] pci 0000:06:04.0: IO window: 0x00a400-0x00a4ff
[ 0.648388] pci 0000:06:04.0: IO window: 0x00a800-0x00a8ff
[ 0.648395] pci 0000:06:04.0: PREFETCH window: 0x60000000-0x63ffffff
[ 0.648401] pci 0000:06:04.0: MEM window: 0x64000000-0x67ffffff
[ 0.648408] pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
[ 0.648412] pci 0000:00:14.4: IO window: 0xa000-0xafff
[ 0.648419] pci 0000:00:14.4: MEM window: 0xb0200000-0xb02fffff
[ 0.648425] pci 0000:00:14.4: PREFETCH window: 0x00000060000000-0x00000063ffffff
[ 0.648446] pci 0000:00:04.0: setting latency timer to 64
[ 0.648468] pci 0000:06:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.648476] bus: 00 index 0 io port: [0, ffff]
[ 0.648478] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.648481] bus: 01 index 0 io port: [9000, 9fff]
[ 0.648483] bus: 01 index 1 mmio: [b0100000, b01fffff]
[ 0.648486] bus: 01 index 2 mmio: [c0000000, cfffffff]
[ 0.648488] bus: 01 index 3 mmio: [0, 0]
[ 0.648491] bus: 02 index 0 mmio: [0, fff]
[ 0.648493] bus: 02 index 1 mmio: [0, fffff]
[ 0.648495] bus: 02 index 2 mmio: [0, 0]
[ 0.648497] bus: 02 index 3 mmio: [0, 0]
[ 0.648499] bus: 06 index 0 io port: [a000, afff]
[ 0.648502] bus: 06 index 1 mmio: [b0200000, b02fffff]
[ 0.648504] bus: 06 index 2 mmio: [60000000, 63ffffff]
[ 0.648507] bus: 06 index 3 io port: [0, ffff]
[ 0.648509] bus: 06 index 4 mmio: [0, ffffffff]
[ 0.648511] bus: 07 index 0 io port: [a400, a4ff]
[ 0.648514] bus: 07 index 1 io port: [a800, a8ff]
[ 0.648516] bus: 07 index 2 mmio: [60000000, 63ffffff]
[ 0.648519] bus: 07 index 3 mmio: [64000000, 67ffffff]
[ 0.648532] NET: Registered protocol family 2
[ 0.648660] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.649023] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.650143] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.650766] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.650769] TCP reno registered
[ 0.650896] NET: Registered protocol family 1
[ 0.651038] checking if image is initramfs... it is
[ 1.152079] Switched to high resolution mode on CPU 0
[ 1.527683] Freeing initrd memory: 9641k freed
[ 1.528454] audit: initializing netlink socket (disabled)
[ 1.528474] type=2000 audit(1238067516.528:1): initialized
[ 1.535101] highmem bounce pool size: 64 pages
[ 1.535108] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.537310] VFS: Disk quotas dquot_6.5.1
[ 1.537402] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.537514] msgmni has been set to 1757
[ 1.537645] io scheduler noop registered
[ 1.537648] io scheduler anticipatory registered
[ 1.537650] io scheduler deadline registered
[ 1.537663] io scheduler cfq registered (default)
[ 1.537675] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 1.537730] pci 0000:01:05.0: Boot video device
[ 1.537848] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.537873] pcieport-driver 0000:00:04.0: found MSI capability
[ 1.537877] pci_express 0000:00:04.0:pcie00: allocate port service
[ 1.537921] pci_express 0000:00:04.0:pcie01: allocate port service
[ 1.560089] aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.560276] isapnp: Scanning for PnP cards...
[ 1.914432] isapnp: No Plug & Play device found
[ 1.950617] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.951234] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.951243] serial 0000:00:14.6: PCI INT B disabled
[ 1.952812] brd: module loaded
[ 1.952890] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.953005] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.974179] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.991961] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.991967] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.991969] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.991972] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.991975] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.992469] mice: PS/2 mouse device common for all mice
[ 1.993329] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.993356] rtc0: alarms up to one month
[ 1.993475] EISA: Probing bus 0 at eisa.0
[ 1.993484] Cannot allocate resource for EISA slot 1
[ 1.993512] Cannot allocate resource for EISA slot 8
[ 1.993514] EISA: Detected 0 cards.
[ 1.993518] cpuidle: using governor ladder
[ 1.993521] cpuidle: using governor menu
[ 1.994105] TCP cubic registered
[ 1.994145] Using IPI No-Shortcut mode
[ 1.994333] registered taskstats version 1
[ 1.994464] Magic number: 1:681:631
[ 1.994564] tty ptyca: hash matches
[ 1.994700] rtc_cmos 00:04: setting system clock to 2009-03-26 11:38:38 UTC (1238067518)
[ 1.994703] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.994705] EDD information not available.
[ 1.995040] Freeing unused kernel memory: 424k freed
[ 1.995106] Write protecting the kernel text: 2580k
[ 1.995146] Write protecting the kernel read-only data: 940k
[ 2.011101] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.073086] compcache: Compressed swap size set to: 318956 KB
[ 2.073832] TLSF: pool: f8824000, init_size=16384, max_size=0, grow_size=16384
[ 2.260046] fuse init (API version 7.9)
[ 2.370455] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.370509] processor ACPI0007:00: registered as cooling_device0
[ 2.370514] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.374491] Marking TSC unstable due to TSC halts in idle
[ 2.391950] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.407771] ACPI: Thermal Zone [THRM] (0 C)
[ 2.973925] usbcore: registered new interface driver usbfs
[ 2.973953] usbcore: registered new interface driver hub
[ 2.973985] usbcore: registered new device driver usb
[ 2.983310] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.983345] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.983360] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.983414] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 2.983443] ohci_hcd 0000:00:13.0: irq 19, io mem 0xb0000000
[ 3.023319] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 3.040216] usb usb1: configuration #1 chosen from 1 choice
[ 3.040248] hub 1-0:1.0: USB hub found
[ 3.040263] hub 1-0:1.0: 4 ports detected
[ 3.063376] No dock devices found.
[ 3.120470] SCSI subsystem initialized
[ 3.144321] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.144340] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.144367] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 3.144388] ohci_hcd 0000:00:13.1: irq 19, io mem 0xb0001000
[ 3.204612] usb usb2: configuration #1 chosen from 1 choice
[ 3.204643] hub 2-0:1.0: USB hub found
[ 3.204658] hub 2-0:1.0: 4 ports detected
[ 3.223685] libata version 3.00 loaded.
[ 3.250779] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.308388] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.308406] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.308432] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 3.308490] ehci_hcd 0000:00:13.2: irq 19, io mem 0xb0002000
[ 3.320045] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.320239] usb usb3: configuration #1 chosen from 1 choice
[ 3.320269] hub 3-0:1.0: USB hub found
[ 3.320281] hub 3-0:1.0: 8 ports detected
[ 3.399004] Adding 318952k swap on /dev/ramzswap0. Priority:100 extents:1 across:318952k
[ 3.424370] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.424418] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 3.424510] scsi0 : pata_atiixp
[ 3.424603] scsi1 : pata_atiixp
[ 3.426077] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[ 3.426080] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[ 3.588621] ata1.00: ATA-6: FUJITSU MHV2080AH, 00830096, max UDMA/100
[ 3.588626] ata1.00: 156301488 sectors, multi 16: LBA
[ 3.604571] ata1.00: configured for UDMA/100
[ 3.785239] ata2.00: ATAPI: PIONEER DVDRW DVR-K15, 1.12, max MWDMA2
[ 3.817215] ata2.00: configured for MWDMA2
[ 3.817336] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080A 0083 PQ: 0 ANSI: 5
[ 3.826617] scsi 1:0:0:0: CD-ROM PIONEER DVDRW DVR-K15 1.12 PQ: 0 ANSI: 5
[ 3.827497] b43-pci-bridge 0000:06:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.884123] ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0
[ 3.884175] ohci1394 0000:06:04.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 3.933945] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[b0209000-b02097ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.940046] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 3.940053] 8139cp 0000:06:06.0: Try the "8139too" driver instead.
[ 3.952605] 8139too Fast Ethernet driver 0.9.28
[ 3.952661] 8139too 0000:06:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.953916] eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:c0:e3:74, IRQ 22
[ 3.953919] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 3.970198] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.970241] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.993517] Driver 'sd' needs updating - please use bus_type methods
[ 3.993630] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 3.993647] sd 0:0:0:0: [sda] Write Protect is off
[ 3.993650] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.993674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.993745] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 3.993759] sd 0:0:0:0: [sda] Write Protect is off
[ 3.993762] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.993784] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.993789] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.068504] sda1 sda2 < sda5 >
[ 4.091921] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.120406] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.120413] Uniform CD-ROM driver Revision: 3.20
[ 4.120527] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.419986] kjournald starting. Commit interval 5 seconds
[ 4.420020] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.204155] ieee1394: Host added: ID:BUS[0-00:1023] GUID[613f0200400b407a]
[ 12.146660] udevd version 124 started
[ 12.940174] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.976236] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.028170] Linux agpgart interface v0.103
[ 13.223252] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
[ 13.860249] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 13.872302] ACPI: Power Button (FF) [PWRF]
[ 13.872447] input: Sleep Button (FF) as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[ 13.884043] ACPI: Sleep Button (FF) [SLPF]
[ 13.884185] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 13.884273] ACPI: Lid Switch [LID]
[ 13.884368] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 13.892067] ACPI: Power Button (CM) [PWRB]
[ 13.892183] ACPI: WMI: Mapper loaded
[ 14.100182] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.212055] MC'97 0 converters and GPIO not ready (0x1)
[ 14.292203] Yenta: CardBus bridge found at 0000:06:04.0 [103c:309b]
[ 14.292230] Yenta: Enabling burst memory read transactions
[ 14.292236] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 14.292239] Yenta: Routing CardBus interrupts to ISA
[ 14.292246] Yenta TI: socket 0000:06:04.0, mfunc 0x00a61b22, devctl 0x64
[ 14.520182] sdhci: Secure Digital Host Controller Interface driver
[ 14.520187] sdhci: Copyright(c) Pierre Ossman
[ 14.524804] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 14.524810] Socket status: 30000006
[ 14.524814] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 14.524817] cs: IO port probe 0xa000-0xafff: clean.
[ 14.524987] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
[ 14.524990] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
[ 14.620463] tifm_7xx1 0000:06:04.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 14.620550] sdhci-pci 0000:06:04.4: SDHCI controller found [104c:8034] (rev 0)
[ 14.620566] sdhci-pci 0000:06:04.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 14.620623] mmc0: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 14.620659] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 14.620694] mmc2: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 14.728081] ACPI: AC Adapter [ACAD] (on-line)
[ 14.948208] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.172081] ACPI: Battery Slot [BAT1] (battery absent)
[ 15.448261] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/device:10/input/input6
[ 15.460022] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.992696] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 16.121886] b43-phy0: Broadcom 4318 WLAN found
[ 16.190349] phy0: Selected rate control algorithm 'pid'
[ 16.408446] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 16.515187] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 16.578726] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 18.258539] cs: IO port probe 0x100-0x3af: clean.
[ 18.261011] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
[ 18.262025] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[ 18.262872] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 18.263822] cs: IO port probe 0xa00-0xaff: clean.
[ 19.116262] lp: driver loaded but no devices found
[ 19.470206] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k
[ 20.029639] EXT3 FS on sda1, internal journal
[ 21.184357] type=1505 audit(1238067537.276:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4028
[ 21.246208] type=1505 audit(1238067537.336:3): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=4033
[ 21.479311] type=1505 audit(1238067537.568:4): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4037
[ 21.479639] type=1505 audit(1238067537.568:5): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4037
[ 21.660033] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.724551] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-32 processors (1 cpu cores) (version 2.20.00)
[ 22.724594] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x4
[ 22.724597] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6
[ 22.724599] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16
[ 22.724634] powernow-k8: ph2 null fid transition 0xa
[ 23.493892] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 23.584316] apm: BIOS not found.
[ 24.642805] ppdev: user-space parallel port driver
[ 26.919431] Bluetooth: Core ver 2.13
[ 26.921201] NET: Registered protocol family 31
[ 26.921206] Bluetooth: HCI device and connection manager initialized
[ 26.921210] Bluetooth: HCI socket layer initialized
[ 26.938551] Bluetooth: L2CAP ver 2.11
[ 26.938557] Bluetooth: L2CAP socket layer initialized
[ 26.951396] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.951402] Bluetooth: BNEP filters: protocol multicast
[ 26.968134] Bridge firewalling registered
[ 26.983475] Bluetooth: SCO (Voice Link) ver 0.6
[ 26.983481] Bluetooth: SCO socket layer initialized
[ 27.102062] Bluetooth: RFCOMM socket layer initialized
[ 27.102338] Bluetooth: RFCOMM TTY layer initialized
[ 27.102343] Bluetooth: RFCOMM ver 1.10
[ 28.648034] Clocksource tsc unstable (delta = -263158975 ns)
[ 29.196936] pci 0000:01:05.0: power state changed by ACPI to D0
[ 29.196961] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 29.636977] [drm] Initialized drm 1.1.0 20060810
[ 29.658063] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 29.906560] mtrr: base(0xc0000000) is not aligned on a size(0x9000000) boundary
[ 30.204480] [drm] Setting GART location based on new memory map
[ 30.207152] [drm] Loading R300 Microcode
[ 30.207190] [drm] Num pipes: 1
[ 30.207200] [drm] writeback test succeeded in 1 usecs
[ 31.224884] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 31.318412] input: b43-phy0 as /devices/virtual/input/input9
[ 31.412120] firmware: requesting b43/ucode5.fw
[ 31.535354] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 31.535368] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 31.571334] input: b43-phy0 as /devices/virtual/input/input10
[ 31.628064] firmware: requesting b43/ucode5.fw
[ 31.633202] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 31.633218] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 31.889785] NET: Registered protocol family 17
[ 38.676168] NET: Registered protocol family 10
[ 38.679834] lo: Disabled Privacy Extensions
[ 49.288030] eth0: no IPv6 routers present
criceto@criceto-laptop:~$