RISOLTO problema con hd esterno
Inviato: giovedì 26 marzo 2009, 15:37
salve avrei bisogno di aiuto...
io ho un problema con il mio hd esterno ho seguito i forum ma non riesco a saltarci fuori..
il terminale mi riconosce il disco rigido ma non riesco a montarlo
ho provato con questi passaggi
sudo fdisk -l
Disco /dev/sda: 80.0 GB, 80026361856 byte
255 testine, 63 settori/tracce, 9729 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0x5eaa5eaa
Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 1 9637 77409171 83 Linux
/dev/sda2 9638 9729 738990 5 Esteso
/dev/sda5 9638 9729 738958+ 82 Linux swap / Solaris
Disco /dev/sdb: 400.0 GB, 400088457216 byte
255 testine, 63 settori/tracce, 48641 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0xfa4c60e8
Dispositivo Boot Start End Blocks Id System
/dev/sdb1 * 1 48641 390708801 7 HPFS/NTFS
nel mio caso e il disco da 400.0 gb
dopo ho provato a dare il comando
~$ mount -t ntfs-3g/dev/sdb1/media/DADA -o forceUsage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
qualcuno sa spiegarmi come devo fare!!!!!!!!!!!!!!
grazie tante
e il risultato e questo
io ho un problema con il mio hd esterno ho seguito i forum ma non riesco a saltarci fuori..
il terminale mi riconosce il disco rigido ma non riesco a montarlo
ho provato con questi passaggi
sudo fdisk -l
Disco /dev/sda: 80.0 GB, 80026361856 byte
255 testine, 63 settori/tracce, 9729 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0x5eaa5eaa
Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 1 9637 77409171 83 Linux
/dev/sda2 9638 9729 738990 5 Esteso
/dev/sda5 9638 9729 738958+ 82 Linux swap / Solaris
Disco /dev/sdb: 400.0 GB, 400088457216 byte
255 testine, 63 settori/tracce, 48641 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Identificativo disco: 0xfa4c60e8
Dispositivo Boot Start End Blocks Id System
/dev/sdb1 * 1 48641 390708801 7 HPFS/NTFS
nel mio caso e il disco da 400.0 gb
dopo ho provato a dare il comando
~$ mount -t ntfs-3g/dev/sdb1/media/DADA -o forceUsage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
qualcuno sa spiegarmi come devo fare!!!!!!!!!!!!!!
grazie tante
e il risultato e questo