[Usb] Scanner ScanPrisa 124OUT - ACER
Inviato: mercoledì 8 aprile 2009, 0:36
Ciao, ho lo scanner in oggetto che non riesco a far funzionare.
Ho installato ubuntu 8.10, posto i risultati ai comandi:
sudo sane-find-scanner
scanimage -L
xsane lo trova, ma da un errore "non è possibile aprire il dispositivo. L'Argomento non è valido".
Il produttore fornisce solo i driver per windows...
Che posso fare?
Grazie in anticipo!
Ho installato ubuntu 8.10, posto i risultati ai comandi:
sudo sane-find-scanner
Codice: Seleziona tutto
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04a5 [Color], product=0x20c0 [ FlatbedScanner 13]) at libusb:005:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Codice: Seleziona tutto
scanimage -L
device `snapscan:libusb:005:002' is a Acer FlatbedScanner13 flatbed scanner
xsane lo trova, ma da un errore "non è possibile aprire il dispositivo. L'Argomento non è valido".
Il produttore fornisce solo i driver per windows...
Che posso fare?
Grazie in anticipo!