Server in crash ....

Riconoscimento, installazione e configurazione delle periferiche.
Rages
Prode Principiante
Messaggi: 26
Iscrizione: martedì 13 gennaio 2009, 10:57

Server in crash ....

Messaggio da Rages »

Salve a tutti,

Un paio di mesi fa scrivevo per trovare aiuto per mettere su un piccolo server Ubuntu 8.10, tutto è andato piuttosto bene, grazie anche all'aiuto del forum, adesso però ha incominciato ad accusare dei problemi.

Il server è costituito da un AMD 2350BE con 4Gb di ram e 2 HD in raid 0 e un hd da 750Gb x il backup.

Il problema è questo ... mi appaiono un sacco di scritte strane e poi mi esce kernel panic e tutto si blocca ... riavvio ... mi dà un errore ACPI (se non erro...).
Non c'è un file log da postarvi x capirci qualcosa di più? o un comando da dare x fare apparire cosa non va?
Una volta riavviato mi resta su per una giornata ... dopo di nuovo kernel panic.
Avatar utente
AlexSistemiFree
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1373
Iscrizione: venerdì 15 dicembre 2006, 9:43

Re: Server in crash ....

Messaggio da AlexSistemiFree »

E' una rottura.

Se riesci ad entrare nel sistema magari puoi dare:
dmesg > dmesg.txt
però in realtà ci sono tanti file di log, a parte i casi in cui le eventuali problematiche sono mostrate solo su console e non scritte su nessun file di log.
Rages
Prode Principiante
Messaggi: 26
Iscrizione: martedì 13 gennaio 2009, 10:57

Re: Server in crash ....

Messaggio da Rages »

posto il mio dmesg

[    8.542388]  sda1 sda2 input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-6/2-6:1.1/input/input2
[    8.550952] input,hiddev96,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:04.0-6
[    8.550975] usbcore: registered new interface driver usbhid
[    8.550979] usbhid: v2.6:USB HID core driver
[    8.559496]  sda5 >
[    8.559655] sd 0:0:0:0: [sda] Attached SCSI disk
[    8.559745] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[    8.559767] sd 1:0:0:0: [sdb] Write Protect is off
[    8.559770] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    8.559807] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.559874] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[    8.559893] sd 1:0:0:0: [sdb] Write Protect is off
[    8.559896] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    8.559932] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.559936]  sdb: sdb1
[    8.566931] sd 1:0:0:0: [sdb] Attached SCSI disk
[    8.567023] sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[    8.567045] sd 3:0:0:0: [sdc] Write Protect is off
[    8.567048] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    8.567086] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.567157] sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[    8.567177] sd 3:0:0:0: [sdc] Write Protect is off
[    8.567179] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    8.567216] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.567220]  sdc: sdc1 sdc2 ata8: port disabled. ignoring.
[    8.598512]  sdc5 >
[    8.598680] sd 3:0:0:0: [sdc] Attached SCSI disk
[    8.993704] PM: Starting manual resume from disk
[    8.993708] PM: Resume from partition 254:2
[    8.993710] PM: Checking hibernation image.
[    8.993850] PM: Resume from disk failed.
[    9.014898] EXT3-fs: INFO: recovery required on readonly filesystem.
[    9.014903] EXT3-fs: write access will be enabled during recovery.
[    9.530475] kjournald starting.  Commit interval 5 seconds
[    9.530491] EXT3-fs: dm-1: orphan cleanup on readonly fs
[    9.530499] ext3_orphan_cleanup: deleting unreferenced inode 6135816
[    9.530529] ext3_orphan_cleanup: deleting unreferenced inode 6135815
[    9.530536] ext3_orphan_cleanup: deleting unreferenced inode 6135814
[    9.530542] ext3_orphan_cleanup: deleting unreferenced inode 6135813
[    9.530549] ext3_orphan_cleanup: deleting unreferenced inode 6135812
[    9.530555] EXT3-fs: dm-1: 5 orphan inodes deleted
[    9.530557] EXT3-fs: recovery complete.
[    9.537466] EXT3-fs: mounted filesystem with ordered data mode.
[    9.741466] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c00017fbc25]
[  11.791188] udevd version 124 started
[  12.297197] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[  12.345960] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[  12.345967] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
[  12.345989] HDA Intel 0000:00:07.0: setting latency timer to 64
[  12.361307] ACPI: Power Button (FF) [PWRF]
[  12.361400] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[/sub]
Rages
Prode Principiante
Messaggi: 26
Iscrizione: martedì 13 gennaio 2009, 10:57

Re: Server in crash ....

Messaggio da Rages »

[  12.424096] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[  12.441319] ACPI: Power Button (CM) [PWRB]
[  14.235200] ACPI: WMI: Mapper loaded
[  14.376451] usbcore: registered new interface driver usbserial
[  14.376470] usbserial: USB Serial support registered for generic
[  14.376514] usbcore: registered new interface driver usbserial_generic
[  14.376517] usbserial: USB Serial Driver core
[  14.386140] usbserial: USB Serial support registered for GSM modem (1-port)
[  14.386169] option 1-6:1.0: GSM modem (1-port) converter detected
[  14.386350] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0
[  14.386365] option 1-6:1.1: GSM modem (1-port) converter detected
[  14.386441] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1
[  14.386454] option 1-6:1.2: GSM modem (1-port) converter detected
[  14.386527] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2
[  14.386542] usbcore: registered new interface driver option
[  14.386544] option: USB Driver for GSM modems: v0.7.2
[  14.716233] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  14.719289] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  15.031722] input: PC Speaker as /devices/platform/pcspkr/input/input5
[  16.537656] loop: module loaded
[  16.595831] lp: driver loaded but no devices found
[  16.908175] Adding 5301408k swap on /dev/mapper/nvidia_dcedbcab5.  Priority:-1 extents:1 across:5301408k
[  17.290275] EXT3 FS on dm-1, internal journal
[  17.635541] kjournald starting.  Commit interval 5 seconds
[  17.635965] EXT3 FS on sdb1, internal journal
[  17.635970] EXT3-fs: recovery complete.
[  17.636102] EXT3-fs: mounted filesystem with ordered data mode.
[  18.072765] type=1505 audit(1239348215.609:2): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4624
[  18.255185] ip_tables: (C) 2000-2006 Netfilter Core Team
[  18.336383] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  18.336534] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
[  18.336537] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[  18.336539] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[  18.790566] NET: Registered protocol family 10
[  18.791128] lo: Disabled Privacy Extensions
[  23.263230] warning: `dhcpd3' uses 32-bit capabilities (legacy support in use)
[  23.397968] NET: Registered protocol family 17
[  29.660013] eth0: no IPv6 routers present
[  71.565916] PPP generic driver version 2.4.2
[  71.669806] PPP BSD Compression module registered
[  71.719394] PPP Deflate Compression module registered
Rages
Prode Principiante
Messaggi: 26
Iscrizione: martedì 13 gennaio 2009, 10:57

Re: Server in crash ....

Messaggio da Rages »

è possibile che questo mio problema sia dovuto alla RAM?

Ho installato 2 Gb (2x 1 Gb DDR2) Corsair Dominator 1066 MHz e ho provato a fare un memtest dopo un crash ... beh non ha passato un test sono usciti solo errori ... dovrei settare qualcosa di particolare x fare questi test? Mi suona un tantino strano che non passi proprio nulla.
Avatar utente
Stealth
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 17368
Iscrizione: martedì 31 gennaio 2006, 22:55
Desktop: Gnome
Distribuzione: Ubuntu 22.04 LTS

Re: Server in crash ....

Messaggio da Stealth »

Rages ha scritto: è possibile che questo mio problema sia dovuto alla RAM?

Ho installato 2 Gb (2x 1 Gb DDR2) Corsair Dominator 1066 MHz e ho provato a fare un memtest dopo un crash ... beh non ha passato un test sono usciti solo errori ...
Beh... >:(
Se fai un test ed escono solo errori, qualcosa che non va ci dovrebbe essere. Comincio? La ram è difettosa....il tuo sistema non supporta quel formato...il bios non è settato per far funzionare i nuovi banchi....
Per non farla troppo lunga, hai provato a togliere la nuova ram e a ripartire con la vecchia dotazione? Non è una prova astuta ma non può sbagliare e, se il pc parte, sai con chi prendertela
ciao

ps: sposto in hardware
Rages
Prode Principiante
Messaggi: 26
Iscrizione: martedì 13 gennaio 2009, 10:57

Re: Server in crash ....

Messaggio da Rages »

Non mi son spiegato bene .. quella ram è montata sin dall'inizio in quel modo .. ed ha sempre funzionato, (3 mesi + o - ) ma non mi spiego come .. infatti da quel che ho capito non è possibile montarle in quel modo.
Ho tolto un banco di RAM e con 1 Gb in single channel il memtest è tutto ok ;)

Il problema nasce col double channel credo che questa scheda non sopporti il double con 1066Mhz.

(O forse questo tipo di RAM).

Di fatto cmq anche in single la fa andare a 800Mhz.
Ho letto da qualche parte di provare ad alzare a 2,11V ho provato ma non cambia nulla.
Per il momento sto andando con 1 Gb e sembra stabile.
Avatar utente
AlexSistemiFree
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1373
Iscrizione: venerdì 15 dicembre 2006, 9:43

Re: Server in crash ....

Messaggio da AlexSistemiFree »

Il tuo sistema supporta memorie ddr o ddr2?

Impostando il tutto a 800 ti funziona pure con 2 schede anziché soltanto una?

Non so la tua motherboard di quanti slot per la ram disponga però capita che escano alcuni modelli sfortunati in cui è presente un problema hardware per cui nei fatti non sono in grado di gestire tutta la memoria che teoricamente potrebbero gestire.

Comunque, se per sbaglio, ti capitasse di provare della ram di un'altra marca, chissà se funziona.
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 4 ospiti