[Ati] "Rage Fury Pro/Xpert 2000 Pro" attivazione 3D
Inviato: venerdì 10 aprile 2009, 10:43
ho l'ultimo ubuntu e vorrei attivare gli effetti grafici, ma quando provo mi dice: "Impossibile abilitare gli effetti desktop".
i "dati" della mia scheda video sono:
18: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.310]
UDI: /org/freedesktop/Hal/devices/pci_1002_5046
Unique ID: VCu0.955TVrR+Yo5
Parent ID: vSkL.mXT7vbpG6dC
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "ATI Rage Fury Pro/Xpert 2000 Pro"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x5046 "Rage 128 PF"
SubVendor: pci 0x1002 "ATI Technologies Inc"
SubDevice: pci 0x0008 "Rage Fury Pro/Xpert 2000 Pro"
Memory Range: 0xe4000000-0xe7ffffff (rw,prefetchable)
I/O Ports: 0x9000-0x9fff (rw)
Memory Range: 0xe9000000-0xe9003fff (rw,non-prefetchable)
Memory Range: 0xe8000000-0xe801ffff (ro,prefetchable,disabled)
IRQ: 10 (no events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d00005046sv00001002sd00000008bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: ati
Driver Info #1:
XFree86 v4 Server Module: ati
3D Support: yes
Color Depths: 16
Extensions: dri
Options:
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (PCI bridge)
come faccio???? ???
i "dati" della mia scheda video sono:
18: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.310]
UDI: /org/freedesktop/Hal/devices/pci_1002_5046
Unique ID: VCu0.955TVrR+Yo5
Parent ID: vSkL.mXT7vbpG6dC
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "ATI Rage Fury Pro/Xpert 2000 Pro"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x5046 "Rage 128 PF"
SubVendor: pci 0x1002 "ATI Technologies Inc"
SubDevice: pci 0x0008 "Rage Fury Pro/Xpert 2000 Pro"
Memory Range: 0xe4000000-0xe7ffffff (rw,prefetchable)
I/O Ports: 0x9000-0x9fff (rw)
Memory Range: 0xe9000000-0xe9003fff (rw,non-prefetchable)
Memory Range: 0xe8000000-0xe801ffff (ro,prefetchable,disabled)
IRQ: 10 (no events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d00005046sv00001002sd00000008bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: ati
Driver Info #1:
XFree86 v4 Server Module: ati
3D Support: yes
Color Depths: 16
Extensions: dri
Options:
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (PCI bridge)
come faccio???? ???