Problemi con le partizioni

Riconoscimento, installazione e configurazione delle periferiche.
Scrivi risposta
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Problemi con le partizioni

Messaggio da deegan »

Dopo aver formattato tutto l'hd esterno da 500GB  l'ho sudiviso così; dev/sdb1 Hardy, dev/sdb2 Swap, dev/sdb3 Linux Mind. Allavvio cliccando su Hardy parte tranquillamente ;D ma cliccando su Mind mi dà ERROR17, ho controllato il menu.lst di Hardy ed è perfetto:

Codice: Seleziona tutto

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		15

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=ca9bb1f6-d261-498e-aa31-33e3e0c8767d ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd1,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu Hardy 8.04.2, kernel 2.6.24-23-generic
root		(hd1,0)
kernel		/boot/vmlinuz-2.6.24-23-generic root=UUID=ca9bb1f6-d261-498e-aa31-33e3e0c8767d ro quiet splash
initrd		/boot/initrd.img-2.6.24-23-generic
quiet

title		Ubuntu Hardy 8.04.2, kernel 2.6.24-23-generic (recovery mode)
root		(hd1,0)
kernel		/boot/vmlinuz-2.6.24-23-generic root=UUID=ca9bb1f6-d261-498e-aa31-33e3e0c8767d ro single
initrd		/boot/initrd.img-2.6.24-23-generic

title		Ubuntu Hardy 8.04.2, kernel 2.6.24-22-generic
root		(hd1,0)
kernel		/boot/vmlinuz-2.6.24-22-generic root=UUID=ca9bb1f6-d261-498e-aa31-33e3e0c8767d ro quiet splash
initrd		/boot/initrd.img-2.6.24-22-generic
quiet

title		Ubuntu Hardy 8.04.2, kernel 2.6.24-22-generic (recovery mode)
root		(hd1,0)
kernel		/boot/vmlinuz-2.6.24-22-generic root=UUID=ca9bb1f6-d261-498e-aa31-33e3e0c8767d ro single
initrd		/boot/initrd.img-2.6.24-22-generic

title		Ubuntu Hardy 8.04.2, memtest86+
root		(hd1,0)
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
		Other operating systems:



# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.


title		Linux Mind 5.0 KDE, kernel 2.6.24-19-generic
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.24-19-generic root=UUID=ac9036d3-44b6-4a98-8f60-9aaa1e7b967e ro quiet splash
initrd		/boot/initrd.img-2.6.24-19-generic
quiet

title		Linux Mind 5.0 KDE, kernel 2.6.24-19-generic (recovery mode)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.24-19-generic root=UUID=ac9036d3-44b6-4a98-8f60-9aaa1e7b967e ro single
initrd		/boot/initrd.img-2.6.24-19-generic

title		Linux Mind 5.0 KDE, memtest86+
root		(hd1,2)
kernel		/boot/memtest86+.bin

savedefault
boot

;D  Ho provato a cliccare sulla partizione /dev/sdb3 per formattarla in ext3 per provare a reistallare, ma mi esce così; Immagine  :o E' possibile che non riesca a montarla.
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Problemi con le partizioni

Messaggio da deegan »

Dimenticavo, cliccando al boot, su Linux Mind mi esce così; 

Codice: Seleziona tutto

root     (hd1,2)
Filesystem type unknown,partition type   0x7
kernel  /boot/vmlinux-2.6.24-19-generic  root=/dev/sdb3 ro quiet splash
Error 17: Cannot mount selected partition
:o
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
Avatar utente
badìl
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 14806
Iscrizione: mercoledì 22 agosto 2007, 16:20

Re: Problemi con le partizioni

Messaggio da badìl »

Sicuro ci sia installata mint in sdb3? A me sembra vuota...
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Problemi con le partizioni

Messaggio da deegan »

Si!! Ora ho provato a riformattarlo tutto. :( Poi ho creato 1partizione da 100GB in ext3, poi creo la seconda, sempre da 100GB in ext3, ma mi esce sempre la stessa finestra di errore..... ??? Cosa puo' essere?? ::) Pazzesco :o
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
Avatar utente
badìl
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 14806
Iscrizione: mercoledì 22 agosto 2007, 16:20

Re: Problemi con le partizioni

Messaggio da badìl »

Non dice l'errore. prova a premere sul triangolino per espandere e vedi se ti dice di più, altrimenti fai un check con fsck, tanto è vuota.
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Problemi con le partizioni

Messaggio da deegan »

badìl ha scritto: Non dice l'errore. prova a premere sul triangolino per espandere e vedi se ti dice di più, altrimenti fai un check con fsck, tanto è vuota.
  Guarda!! ;D Formattato e creato una unica partizione in ext3, ma quel segno marroncino che mi occupa 3,86GB che roba è? Nota che ho dato pure;

Codice: Seleziona tutto

sudo dd if=/dev/zero of=/dev/sdb bs=466 count=1
 

Codice: Seleziona tutto

sudo dd if=/dev/null of=/dev/sdb bs=466 count=1
    Immagine   

Codice: Seleziona tutto

fai un check con fsck, tanto è vuota
Come si fa'? ;)
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
Avatar utente
badìl
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 14806
Iscrizione: mercoledì 22 agosto 2007, 16:20

Re: Problemi con le partizioni

Messaggio da badìl »

Quello è lo spazio riservato al filesystem. Ma perché hai formattato tutto, scusa?  ???
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Problemi con le partizioni

Messaggio da deegan »

badìl ha scritto: Quello è lo spazio riservato al filesystem. Ma perché hai formattato tutto, scusa?  ???
Pensavo avesse un problema l'hd!! :( Cosa sarebbe

Codice: Seleziona tutto

check con fsck
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
Avatar utente
badìl
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 14806
Iscrizione: mercoledì 22 agosto 2007, 16:20

Re: Problemi con le partizioni

Messaggio da badìl »

Avresti potuto fare un controllo DI QUELLA PARTIZIONE con

Codice: Seleziona tutto

sudo fsck /dev/sdb3
ma hai avuto fretta...  :(
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Problemi con le partizioni

Messaggio da deegan »

Codice: Seleziona tutto

deegan@deegan-laptop:~$ sudo fsck /dev/sdb1
fsck 1.40.8 (13-Mar-2008)
e2fsck 1.40.8 (13-Mar-2008)
/dev/sdb1: clean, 11/30531584 files, 1012824/122096000 blocks
deegan@deegan-laptop:~$ 
:-\
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Problemi con le partizioni

Messaggio da deegan »

Creo la seconda partizione, e.....  Immagine ??? :o  NOTA, che ho pure formattato tutto l'hd con Xp. Da cosa potrebbe dipendere??? Piu' pulito di così..
Ultima modifica di deegan il mercoledì 22 aprile 2009, 10:08, modificato 1 volta in totale.
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
Avatar utente
badìl
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 14806
Iscrizione: mercoledì 22 agosto 2007, 16:20

Re: Problemi con le partizioni

Messaggio da badìl »

Scusa ma tu lavori col disco montato?
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Problemi con le partizioni

Messaggio da deegan »

no!! Quando faccio queste operazioni smonto tutti i dischi...
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
Avatar utente
badìl
Tenace Tecnocrate
Tenace Tecnocrate
Messaggi: 14806
Iscrizione: mercoledì 22 agosto 2007, 16:20

Re: Problemi con le partizioni

Messaggio da badìl »

E come mai nell'immagine sono montati invece?
deegan
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 2639
Iscrizione: lunedì 28 aprile 2008, 12:42
Distribuzione: Ubuntu 20.04
Sesso: Maschile
Località: Varese

Re: Problemi con le partizioni

Messaggio da deegan »

Va'ca boia, sun propi nai in un muc'.... ;D ;D
MB* ASUS TUF Gaming Z690 SV* EVGA RTX 3080 Ti CPU* i7-12700K
RAM* Vengeance RGB PRO 32GB 3600MHz SSD* Samsung 980 PRO 2TB
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 7 ospiti