Pagina 1 di 2

[Xorg] Risoluzione 1680x1050 non va...come impostarla da shell?

Inviato: venerdì 15 maggio 2009, 19:35
da dyrkpw
Ho una scheda grafica nvidia 9500 gt, 1 gb di ram dedicata, e un nuovissimo monitor lcd da 22" della packard bell :).
Purtroppo, come al solito, sto facendo a cazzotti con xorg...appena accendo la risoluzione è a 800x600, nonostante non stia scritta da nessuna parte su xorg.conf.

Ho provato a lanciare nvidia-settings da root, ad impostare la risoluzione 1680x1050 e a salvarla (sempre tramite il programma) su xorg.conf...ma non va. La risoluzione, subito dopo essere stat modificata funziona a meraviglia, ma al riavvio riparte da 800x600.

Siccome non voglio continuare a impostare manualmente tutto....cosa devo scrivere?

posto il mio xorg.conf...

Codice: Seleziona tutto

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder62)  Tue Mar 24 06:16:11 PST 2009

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "PKB Viseo 223Ws"
    HorizSync       31.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9500 GT"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1680x1050 +0+0; nvidia-auto-select +0+0; 1440x900_75 +0+0; 1680x1050_60 +0+0"
    SubSection     "Display"
Depth       24
Virtual   1680   1050
      Modes      "1680x1050@60"   "1440x900@60"   "1280x800@60"   "1024x640@60"   "800x500@60"   "640x480@60"   
    EndSubSection
EndSection

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: venerdì 15 maggio 2009, 20:15
da dyrkpw
help...

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: venerdì 15 maggio 2009, 20:22
da telperion
dyrkpw ha scritto:

Codice: Seleziona tutto

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder62)  Tue Mar 24 06:16:11 PST 2009

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "PKB Viseo 223Ws"
    HorizSync       31.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9500 GT"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1680x1050 +0+0; nvidia-auto-select +0+0; 1440x900_75 +0+0; 1680x1050_60 +0+0"
    SubSection     "Display"
Depth       24
Virtual   1680   1050
      Modes      "1680x1050@60"   "1440x900@60"   "1280x800@60"   "1024x640@60"   "800x500@60"   "640x480@60"   
    EndSubSection
EndSection
Fai una copia di backup e poi

Codice: Seleziona tutto

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1680x1050 +0+0; nvidia-auto-select +0+0; 1440x900_75 +0+0; 1680x1050_60 +0+0"
    SubSection     "Display"
Depth       24
Virtual   1680   1050
      Modes      "1680x1050@60"   "1440x900@60"   "1280x800@60"   "1024x640@60"   "800x500@60"   "640x480@60"   
    EndSubSection
EndSection
cambialo in

Codice: Seleziona tutto

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0" 
    Option         "metamodes" "CRT: 1680x1050_60 +0+0; CRT: 1440x900_75 +0+0"
    SubSection     "Display"
Depth       24
    EndSubSection
EndSection

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: venerdì 15 maggio 2009, 21:26
da dyrkpw
telperion ha scritto:
dyrkpw ha scritto:

Codice: Seleziona tutto

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder62)  Tue Mar 24 06:16:11 PST 2009

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "PKB Viseo 223Ws"
    HorizSync       31.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9500 GT"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1680x1050 +0+0; nvidia-auto-select +0+0; 1440x900_75 +0+0; 1680x1050_60 +0+0"
    SubSection     "Display"
Depth       24
Virtual   1680   1050
      Modes      "1680x1050@60"   "1440x900@60"   "1280x800@60"   "1024x640@60"   "800x500@60"   "640x480@60"   
    EndSubSection
EndSection
Fai una copia di backup e poi

Codice: Seleziona tutto

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1680x1050 +0+0; nvidia-auto-select +0+0; 1440x900_75 +0+0; 1680x1050_60 +0+0"
    SubSection     "Display"
Depth       24
Virtual   1680   1050
      Modes      "1680x1050@60"   "1440x900@60"   "1280x800@60"   "1024x640@60"   "800x500@60"   "640x480@60"   
    EndSubSection
EndSection
cambialo in

Codice: Seleziona tutto

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0" 
    Option         "metamodes" "CRT: 1680x1050_60 +0+0; CRT: 1440x900_75 +0+0"
    SubSection     "Display"
Depth       24
    EndSubSection
EndSection
grazie...ma non va.
riparte sempre da 800x600

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: venerdì 15 maggio 2009, 21:46
da ZioGR
purtroppo anche io ho lo stesso problema, sto provando a cambiare il file .nvidia-settings-rc (mi hanno anche indicato di provarlo a sostituire con quello della versione 8.10) ma il problema rimane

questo il mio xorg

Codice: Seleziona tutto

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@palmer)  Sun Feb  1 20:21:04 UTC 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Mon Mar 23 15:33:27 PST 2009
# xorg.conf.failsafe (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "keyboard"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "Configured Monitor"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung SyncMaster"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 75.0
EndSection

Section "Device"
    Identifier     "Configured Video Device"
    Driver         "nvidia"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7300 GT"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Configured Video Device"
    Monitor        "Configured Monitor"
    DefaultDepth    24
    Option         "NoLogo" "True"
    SubSection     "Display"
        Depth       24
        Modes      "nvidia-auto-select"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

grazie

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: venerdì 15 maggio 2009, 21:58
da Jack_ut
Edit:
Prova a vedere se così va

Codice: Seleziona tutto

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@crested)  Sun Feb  1 20:25:37 UTC 2009

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "PKB Viseo 223Ws"
    HorizSync       30.0 - 80.0
    VertRefresh     55.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9500 GT"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1680x1050 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
Edit2:
le frequenze di aggiornamento presenti sul sito del produttore sono leggermente differenti

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: venerdì 15 maggio 2009, 22:03
da dyrkpw
Jack_ut ha scritto: Potresti specificare più in dettaglio marca e modello del monitor?
Packard bell Viseo 223Ws

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: venerdì 15 maggio 2009, 22:09
da Jack_ut
Hai provato a controllare anche dopo il riavvio /var/log/Xorg.0.log

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: venerdì 15 maggio 2009, 22:14
da dyrkpw
Jack_ut ha scritto: Hai provato a controllare anche dopo il riavvio /var/log/Xorg.0.log
è un file un po' lungo...posto le ultime due righe...

Codice: Seleziona tutto

(II) NVIDIA(0): Setting mode "800x600"
(II) NVIDIA(0): Setting mode "CRT-1:1680x1050@1680x1050+0+0"

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: venerdì 15 maggio 2009, 22:20
da Jack_ut
Se guardi il mio post, precedente l'ho modificato, ho notato che le frequenze indicate nel tuo xorg.conf differiscono con quelle indicate sul sito del produttore

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: venerdì 15 maggio 2009, 22:35
da dyrkpw
Jack_ut ha scritto: Se guardi il mio post, precedente l'ho modificato, ho notato che le frequenze indicate nel tuo xorg.conf differiscono con quelle indicate sul sito del produttore
ho modificato le frequenze...ma ancora niente, non ne vuole proprio sapere  >:(

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: venerdì 15 maggio 2009, 22:46
da Jack_ut
Che versione dei drivers stai utilizzando?
Se guardi lo xorg.conf che ti avevo postato più su, è quello che uso su Jaunty con drivers 180.44, con una 8800 (naturalmente l'ho modificato per la tua configurazione) e va senza problemi.

Hai provato inoltre ad impostare risoluzioni inferiori e vedere se le impostazioni venivano mantenute?

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: sabato 16 maggio 2009, 13:34
da dyrkpw
Jack_ut ha scritto: Che versione dei drivers stai utilizzando?
Se guardi lo xorg.conf che ti avevo postato più su, è quello che uso su Jaunty con drivers 180.44, con una 8800 (naturalmente l'ho modificato per la tua configurazione) e va senza problemi.

Hai provato inoltre ad impostare risoluzioni inferiori e vedere se le impostazioni venivano mantenute?

anch'io uso i driver 180.44...può influire il fatto che siano a 64 bit (non credo).
uso anch'io jaunty, ovviamente versione amd64.

ho provato a salvare con 1440x900 ma non va...

quasi quasi scrivo un sh che faccia questo lavoretto al posto mio...

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: sabato 16 maggio 2009, 14:01
da Jack_ut
Anche la mia versione è a 64 bit e i drivers funzionano bene. Tra le varie cose, hai provato anche da terminale

Codice: Seleziona tutto

sudo nvidia-xconfig
e poi di nuovo

Codice: Seleziona tutto

sudo nvidia-settings
reimpostando la risoluzione?

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: sabato 16 maggio 2009, 14:07
da dyrkpw
Jack_ut ha scritto: Anche la mia versione è a 64 bit e i drivers funzionano bene. Tra le varie cose, hai provato anche da terminale

Codice: Seleziona tutto

sudo nvidia-xconfig
e poi di nuovo

Codice: Seleziona tutto

sudo nvidia-settings
reimpostando la risoluzione?
Ti rigrazio per la pazienza (io mi sono già studato da un pezzo  ;D)...
ho fatto come mi hai detto, ma l'lcd non ubbidisce...riposto lo xorg.conf e il log..

Codice: Seleziona tutto

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder62)  Tue Mar 24 06:16:11 PST 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder62)  Tue Mar 24 06:15:32 PST 2009

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "PKB Viseo 223Ws"
    HorizSync       31.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9500 GT"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1440x900_75 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Codice: Seleziona tutto

(II) NVIDIA(0): Setting mode "800x600"
(II) NVIDIA(0): Setting mode "1440x900_75+0+0"

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: sabato 16 maggio 2009, 15:37
da Jack_ut
Prova da allegare lo xorg.0.log completo, magari c'è qualche informazione che ci sfugge, mi sembra strano il messaggio

Codice: Seleziona tutto

(II) NVIDIA(0): Setting mode "800x600"
(II) NVIDIA(0): Setting mode "1440x900_75+0+0"
che presenta due risoluzioni (come se avessi due monitor collegati), nel mio xorg.0.log ne viene indicata solo una, che è quella che ho impostato tramite nvidia-settings.

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: sabato 16 maggio 2009, 16:21
da dyrkpw
Jack_ut ha scritto: Prova da allegare lo xorg.0.log completo, magari c'è qualche informazione che ci sfugge, mi sembra strano il messaggio

Codice: Seleziona tutto

(II) NVIDIA(0): Setting mode "800x600"
(II) NVIDIA(0): Setting mode "1440x900_75+0+0"
che presenta due risoluzioni (come se avessi due monitor collegati), nel mio xorg.0.log ne viene indicata solo una, che è quella che ho impostato tramite nvidia-settings.
eccolo:

Codice: Seleziona tutto


X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-15-server x86_64 Ubuntu
Current Operating System: Linux catorcioDuo 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 x86_64
Build Date: 09 April 2009  02:11:54AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@crested.buildd) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 16 16:18:17 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0xb40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@5:0:0) nVidia Corporation GeForce 9500 GT rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  180.44  Tue Mar 24 06:11:47 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  180.44  Tue Mar 24 05:51:43 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 05@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1440x900_75 +0+0"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 9500 GT (G96) at PCI:5:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 1048576 kBytes
(--) NVIDIA(0): VideoBIOS: 62.94.3c.00.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 9500 GT at PCI:5:0:0:
(--) NVIDIA(0):     PKB Viseo 223Ws (CRT-1)
(--) NVIDIA(0): PKB Viseo 223Ws (CRT-1): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1440x900_75+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
(--) NVIDIA(0): DPI set to (79, 78); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "1440x900_75+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "it"
(**) AT Translated Set 2 keyboard: xkb_layout: "it"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
(**) ImPS/2 Generic Wheel Mouse: always reports core events
(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Generic Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Generic Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Generic Wheel Mouse: (accel) set acceleration profile 0
(II) NVIDIA(0): Setting mode "800x600"
(II) NVIDIA(0): Setting mode "1440x900_75+0+0"

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: sabato 16 maggio 2009, 18:53
da Jack_ut
Confrontando il tuo xorg.0.log col mio ho notato che proprio le ultime due righe non sono presenti. Se non lo hai già fatto potresti provare a disattivare i drivers da Sistema>Amministrazione>Driver Hardware, disinstallare da synaptyc gli nvidia-glx-180 e nvidia-settings usando la rimozione completa, poi potresti dare un

Codice: Seleziona tutto

sudo dpkg-reconfigure -phigh xserver-xorg
riavviare e reinstallare nvidia-glx-180 e nvidia-settings e riattivare quindi i drivers.

P.S.
Potresti anche provare ad eliminare il file (nascosto) .nvidia-settings-rc presente nella tua home

Re: [Xorg] Risoluzione 1680x1050 non va....

Inviato: domenica 17 maggio 2009, 10:35
da dyrkpw
Jack_ut ha scritto: Confrontando il tuo xorg.0.log col mio ho notato che proprio le ultime due righe non sono presenti. Se non lo hai già fatto potresti provare a disattivare i drivers da Sistema>Amministrazione>Driver Hardware, disinstallare da synaptyc gli nvidia-glx-180 e nvidia-settings usando la rimozione completa, poi potresti dare un

Codice: Seleziona tutto

sudo dpkg-reconfigure -phigh xserver-xorg
riavviare e reinstallare nvidia-glx-180 e nvidia-settings e riattivare quindi i drivers.

P.S.
Potresti anche provare ad eliminare il file (nascosto) .nvidia-settings-rc presente nella tua home
ho provato tutto, ma proprio non va.
C'è un comando che configura "da shell" la risoluzione dello schermo?
così lo faccio partire all' avvio...

Re: [Xorg] Risoluzione 1680x1050 non va...come impostarla da shell?

Inviato: domenica 17 maggio 2009, 13:09
da dyrkpw
up