lm-sensor su aspire one?
lm-sensor su aspire one?
Salve a tutti, ho un aspire one con ubuntu 9.04; ieri ho provato ad installare lm-sensor per monitorare la temperatura della cpu, dischi, ecc... il proplema è che una volta installato, lancio il comando "sudo sensors-detect" e rispondo YES a tutto ma alla fine mi dice che non ha trovato nessun sensore. Questo è l'output da terminale:
# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): YES
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7
We will now try to load each adapter module in turn.
Load `i2c-i801' (say NO if built into your kernel)? (YES/no): YES
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
Module loaded successfully.
If you have undetectable or unsupported I2C/SMBus adapters, you can have
them scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no): YES
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
Module loaded successfully.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: SMBus I801 adapter at 6000 (i2c-0)
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): YES
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... Yes
Found unknown chip with ID 0xfc11
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No
Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no): YES
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD K10 thermal sensors... No
Intel Core family thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Sorry, no sensors were detected.
Either your sensors are not supported, or they are connected to an
I2C or SMBus adapter that is not supported. See
http://www.lm-sensors.org/wiki/FAQ/Chapter3 for further information.
If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
Qualcuno mi sa dire se devo installare qualcos'altro oppure cosa devo configurare per farlo funzionare?
Grazie in anticipo
# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): YES
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7
We will now try to load each adapter module in turn.
Load `i2c-i801' (say NO if built into your kernel)? (YES/no): YES
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
Module loaded successfully.
If you have undetectable or unsupported I2C/SMBus adapters, you can have
them scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no): YES
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
Module loaded successfully.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: SMBus I801 adapter at 6000 (i2c-0)
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): YES
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... Yes
Found unknown chip with ID 0xfc11
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No
Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no): YES
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD K10 thermal sensors... No
Intel Core family thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Sorry, no sensors were detected.
Either your sensors are not supported, or they are connected to an
I2C or SMBus adapter that is not supported. See
http://www.lm-sensors.org/wiki/FAQ/Chapter3 for further information.
If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
Qualcuno mi sa dire se devo installare qualcos'altro oppure cosa devo configurare per farlo funzionare?
Grazie in anticipo
BackBox Linux 2.01 on Acer Aspire One A150
Re: lm-sensor su aspire one?
Non sono esperto :-\, ma puoi compattare il paginone così come ho fatto io modifica/seleziona il testo con il mouse/# che è sopra le faccine e compatti il tuttomarkos81 ha scritto:Codice: Seleziona tutto
# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. We can start with probing for (PCI) I2C or SMBus adapters. Do you want to probe now? (YES/no): YES Probing for PCI bus adapters... Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7 We will now try to load each adapter module in turn. Load `i2c-i801' (say NO if built into your kernel)? (YES/no): YES WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release. Module loaded successfully. If you have undetectable or unsupported I2C/SMBus adapters, you can have them scanned by manually loading the modules before running this script. To continue, we need module `i2c-dev' to be loaded. Do you want to load `i2c-dev' now? (YES/no): YES WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release. Module loaded successfully. We are now going to do the I2C/SMBus adapter probings. Some chips may be double detected; we choose the one with the highest confidence value in that case. If you found that the adapter hung after probing a certain address, you can specify that address to remain unprobed. Next adapter: SMBus I801 adapter at 6000 (i2c-0) Do you want to scan it? (YES/no/selectively): YES Client found at address 0x51 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No Some chips are also accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): YES Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM78-J' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some Super I/O chips may also contain sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): YES Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor'... Yes Found unknown chip with ID 0xfc11 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Fintek'... No Trying family `ITE'... No Some south bridges, CPUs or memory controllers may also contain embedded sensors. Do you want to scan for them? (YES/no): YES Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD K10 thermal sensors... No Intel Core family thermal sensor... No Intel AMB FB-DIMM thermal sensor... No Sorry, no sensors were detected. Either your sensors are not supported, or they are connected to an I2C or SMBus adapter that is not supported. See http://www.lm-sensors.org/wiki/FAQ/Chapter3 for further information. If you find out what chips are on your board, check http://www.lm-sensors.org/wiki/Devices for driver status.
Re: lm-sensor su aspire one?
Per conoscere la temperatura ho risolto con questo
http://forum.ubuntu-it.org/viewtopic.ph ... 1#p2008951
http://forum.ubuntu-it.org/viewtopic.ph ... 1#p2008951
Re: lm-sensor su aspire one?
ma hai usato computertemp? io ho provato ad installarlo ma non rileva niente; bisogna configurarlo in qualche modo?
BackBox Linux 2.01 on Acer Aspire One A150
Re: lm-sensor su aspire one?
qui c'è tuttomarkos81 ha scritto: ma hai usato computertemp? io ho provato ad installarlo ma non rileva niente; bisogna configurarlo in qualche modo?
http://ubuntrucchi.wordpress.com/2008/0 ... mperature/
QUI prosegue la discussione
http://forum.ubuntu-it.org/viewtopic.ph ... 0#p2097670
Re: lm-sensor su aspire one?
Ok sono riuscito a visualizzare la temperatura dei dischi; il problema rimane in quanto non mi trova i sensori della cpu e delle ventole. Ricordo che ho un Acer Aspire One e sembra che sia un problema comune a tutti i possessori di questo netbook. Mi chiedevo se esisteva un altro software per rilevare la temperatura della cpu oppure se fosse possibile editare un qualche file di configurazione...non so...
Qualcuno ha qualche idea?
Grazie mille
Qualcuno ha qualche idea?
Grazie mille
BackBox Linux 2.01 on Acer Aspire One A150
Re: lm-sensor su aspire one?
Non so se la conosci la ricerca avanzata nel forum, nell'attesa che qualcuno ti risponda (io sono neofita), puoi provare a dare un'occhiata, ho trovato varie soluzioni così, nulla vieta poi postare in quei thread che trovi più interessanti, così più facilmente puoi contattare nuovi utenti che già conoscono il tema.
http://forum.ubuntu-it.org/viewtopic.ph ... 9#p1870159
http://forum.ubuntu-it.org/viewtopic.ph ... 9#p1870159
- templarios
- Scoppiettante Seguace

- Messaggi: 523
- Iscrizione: sabato 21 aprile 2007, 9:27
- Località: bellinzona.
Re: lm-sensor su aspire one?
ciao
pure io ho un aspire one, un D150, ho trovato i sensori di cpu e hd, anche se ho dubbi su quello della cpu visto che si sposta di al massimo 2 gradi, delle ventole nessuna traccia. Se hai pure tu un D150 mi puoi dire se la temperatura dell'hd aumenta di molto se attacchi il carica batteria? grazie ciao ciao
pure io ho un aspire one, un D150, ho trovato i sensori di cpu e hd, anche se ho dubbi su quello della cpu visto che si sposta di al massimo 2 gradi, delle ventole nessuna traccia. Se hai pure tu un D150 mi puoi dire se la temperatura dell'hd aumenta di molto se attacchi il carica batteria? grazie ciao ciao
Nulla si crea, Nulla si distrugge, Tutto si trasforma.
La mente è come un paracadute. Funziona solo se si apre.
La mente è come un paracadute. Funziona solo se si apre.
Re: lm-sensor su aspire one?
Niente da fare...riprovato ad installare lm sensor ma continua a non trovarmi i sensori...ho dato un'occhiata sia al sito ufficiale (e secondo il sito i sensori della mia macchina vengono rilevati) sia al mio bios, però stranamente sul bios non vedo nulla che sia attinente con le temperature...la cosa strana è su windows (xp) usavo AA1 fan control, un software per regolare lo spegnimento e l'accensione delle ventole in base ad una determinata temperatura...quindi se mi rilevava la temperatura vuol dire che un sensore esiste!!! :-\
Nessuno ha qualche idea?
Oppure esiste un altro software simile a lm sensor che possa provare?
Grazie a tutti
Nessuno ha qualche idea?
Oppure esiste un altro software simile a lm sensor che possa provare?
Grazie a tutti
BackBox Linux 2.01 on Acer Aspire One A150
Re: lm-sensor su aspire one?
:'( Nessuno a qualche idea?
Per favore aiutatemi non voglio credere che non ci sia un modo per controllare queste temperature!!!!! :'(
Rettifica: Ho provato a dare un acpitool da terminale e questo è il risultato.
:~$ acpitool
Battery #1 : charging, 71.86%, 00:00:33
AC adapter : on-line
Thermal info :
:-\ sto perdendo le speranze...
Per favore aiutatemi non voglio credere che non ci sia un modo per controllare queste temperature!!!!! :'(
Rettifica: Ho provato a dare un acpitool da terminale e questo è il risultato.
:~$ acpitool
Battery #1 : charging, 71.86%, 00:00:33
AC adapter : on-line
Thermal info :
:-\ sto perdendo le speranze...
Ultima modifica di Nogravity il lunedì 25 maggio 2009, 1:54, modificato 1 volta in totale.
BackBox Linux 2.01 on Acer Aspire One A150
Re: lm-sensor su aspire one?
Ma hai messo un nuovo pannello con le temperature nel desktop?markos81 ha scritto: :'( Nessuno a qualche idea?
Per favore aiutatemi non voglio credere che non ci sia un modo per controllare queste temperature!!!!! :'(
Rettifica: Ho provato a dare un acpitool da terminale e questo è il risultato.
:~$ acpitool
Battery #1 : charging, 71.86%, 00:00:33
AC adapter : on-line
Thermal info :
:-\ sto perdendo le speranze...
E' proprio l'ultima parte della guida di ubuntu trucchi, da terminale infatti se non si riavvia il computer ottieni solo la temperatura del disco fisso, poi con il pulsante destro del mouse (una volta messo il pannello) puoi avere molte altre informazioni, se ti perdi riposta e spiega bene dove sei arrivato.
Re: lm-sensor su aspire one?
Allora anche seguendo la guida io mi fermo sempre alla fine di "sudo sensors-detect"; non posso andare avanti in quanto, anche rispondendo YES a tutte le domande, mi esce sempre fuori il messaggio "sorry, no sensors found" quindi anche se metto l'applet sul pannello mi esce fuori semplicemnte la scritta "nessun sensore rilevato".
L'unica cosa che sono riuscito a rilevare è la temperatura dell'hard disk usando hddtemp.
Sembra che non ci siano i sensori, oppure non riesca (per qualche strano motivo) a rilevarli; eppure sulla documentazione sul sito ufficiale di lmsensors i sensori della mia cpu (intel atom) dovrebbero essere rilevati. Ho installato anche l'ultima versione di lm-sensors, la 3.0.2 (cioè quella che ho trovato sui repository ufficiali di jaunty)
L'unica cosa che sono riuscito a rilevare è la temperatura dell'hard disk usando hddtemp.
Sembra che non ci siano i sensori, oppure non riesca (per qualche strano motivo) a rilevarli; eppure sulla documentazione sul sito ufficiale di lmsensors i sensori della mia cpu (intel atom) dovrebbero essere rilevati. Ho installato anche l'ultima versione di lm-sensors, la 3.0.2 (cioè quella che ho trovato sui repository ufficiali di jaunty)
BackBox Linux 2.01 on Acer Aspire One A150
Re: lm-sensor su aspire one?
RETTIFICA:
dando da terminale:
il risultato è:
e successivamente
il risultato è:
Immagino che il motivo sia che questo driver non supporta la mia cpu; per ovviare a questo ho provato a leggere questa guida:
https://wiki.ubuntu.com/CoreTemp?highlight=(coretemp)
ma ho paura a seguirla... :'(
Secondo voi potrebbe risolvermi il problema?
dando da terminale:
Codice: Seleziona tutto
modprobe -l | grep coretempCodice: Seleziona tutto
kernel/drivers/hwmon/coretemp.koCodice: Seleziona tutto
sudo modprobe coretempCodice: Seleziona tutto
FATAL: Error inserting coretemp (/lib/modules/2.6.28.11-generic/kernel/drivers/hwmon/coretemp.ko): No such devicehttps://wiki.ubuntu.com/CoreTemp?highlight=(coretemp)
ma ho paura a seguirla... :'(
Secondo voi potrebbe risolvermi il problema?
BackBox Linux 2.01 on Acer Aspire One A150
Re: lm-sensor su aspire one?
Non so se può risolvere il problema ma la fonte è molto affidabilemarkos81 ha scritto:............. ho provato a leggere questa guida:
https://wiki.ubuntu.com/CoreTemp?highlight=(coretemp)
ma ho paura a seguirla... :'(
Secondo voi potrebbe risolvermi il problema?
Re: lm-sensor su aspire one?
Solo per info alla fine sono riuscito a risolvere il problema delle temperature installando un altro kernel ottimizzato per l'aspire one; chi fosse interessato lo trova qui (l'ho già postato su un'altra discussione riguardante il funzionamento dei lettori sd):
http://blog.liberailvoip.it/2009/06/04/ ... ian-based/
ps. comunque sia lmsensor continua a non funzionarmi...
Grazie a tutti
Ciao
http://blog.liberailvoip.it/2009/06/04/ ... ian-based/
ps. comunque sia lmsensor continua a non funzionarmi...
Grazie a tutti
Ciao
BackBox Linux 2.01 on Acer Aspire One A150
- templarios
- Scoppiettante Seguace

- Messaggi: 523
- Iscrizione: sabato 21 aprile 2007, 9:27
- Località: bellinzona.
Re: lm-sensor su aspire one?
ciao markos81
hai rilevato miglioramenti in altri campi? Tipo durata batteria o altro?
Grazie e ciao
hai rilevato miglioramenti in altri campi? Tipo durata batteria o altro?
Grazie e ciao
Nulla si crea, Nulla si distrugge, Tutto si trasforma.
La mente è come un paracadute. Funziona solo se si apre.
La mente è come un paracadute. Funziona solo se si apre.
Re: lm-sensor su aspire one?
Ciao, guarda è solo due giorni che lo sto usando...ho notato che la batteria dura un pochino di più (l'ho misurata "ad occhio") anche perchè la ventola non gira continuamente ma solo quando raggiunge una determinata temperatura.templarios ha scritto: ciao markos81
hai rilevato miglioramenti in altri campi? Tipo durata batteria o altro?
Grazie e ciao![]()
Il boot sembra più veloce e il sistema più reattivo. Una cosa che ho notato, ad esempio, è che con il kernel generico la connessione della scheda wifi al mio router (dlink) ci metteva anche un paio di minuti (a volte andava in timeout e mi chiedeva di inserire la password per la connessione) mentre utilizzando questo kernel subito dopo la comparsa del desktop si connette (good)
L'unico problema al momento è che non mi fa l'undervolting della cpu nel senso che se inserisco in rc.local la stringa echo "12:16 10:1 8:1 6:1" > /sys/devices/system/cpu/cpu0/cpufreq/phc_controls (come scritto sul sito) dopo il login mi dà schermo nero e non dà segni di vita, però quel kernel è stato testato su un aspire one con disco SSD...magari cambia qualcosa a livello hardware...non so :-\
Io ti consiglio di provarlo al massimo lo puoi disinstallare (anche l'installazione è molto rapida, si tratta di fare doppio clic su un .deb!!!)
Fammi sapere come ti trovi...
Ciao ciao
BackBox Linux 2.01 on Acer Aspire One A150
- templarios
- Scoppiettante Seguace

- Messaggi: 523
- Iscrizione: sabato 21 aprile 2007, 9:27
- Località: bellinzona.
Re: lm-sensor su aspire one?
ciao
mi stai invogliando a provare, solo un altra domanda, per che tipo di aspire one è? Io ho un D150 con HD da 160 gb, ma mi pare di capire che sia previsto per il modello precedente. Tu su quale lo hai testato?
Grazie ancora e ciao
mi stai invogliando a provare, solo un altra domanda, per che tipo di aspire one è? Io ho un D150 con HD da 160 gb, ma mi pare di capire che sia previsto per il modello precedente. Tu su quale lo hai testato?
Grazie ancora e ciao
Nulla si crea, Nulla si distrugge, Tutto si trasforma.
La mente è come un paracadute. Funziona solo se si apre.
La mente è come un paracadute. Funziona solo se si apre.
Re: lm-sensor su aspire one?
Ciao, io lo sto testando sull' A150 da 9'' con HD da 160gb...da quanto ho letto sul sito che ho segnalato dovrebbe funzionare tutto sul D150 tranne il modulo per il controllo della ventola acerhdf (c'è un problema sulla versione del bios). Comunque se dai un'occhiata al sito in fondo dove ci sono i commenti trovi delle info sul D150, stavano parlando giusto di questo problema.templarios ha scritto: ciao
mi stai invogliando a provare, solo un altra domanda, per che tipo di aspire one è? Io ho un D150 con HD da 160 gb, ma mi pare di capire che sia previsto per il modello precedente. Tu su quale lo hai testato?
Grazie ancora e ciao
Comunque al momento mi sto trovando davvero bene...a parte quel problemuccio sull'undervolting va alla grande....
Tienimi informato
Ciao ciao
BackBox Linux 2.01 on Acer Aspire One A150
Chi c’è in linea
Visualizzano questa sezione: Bing [Bot], Google [Bot] e 8 ospiti
