Da ieri, senza installare o rimuovere nulla, quando faccio il login non si avvia compiz o metacity.
Mi spiego meglio...
Se disattivo gli effetti visivi non parte metacity come dovrebbe e sono costretto ad aprire compiz o metacity manualmente (e lì non ho problemi).
Se li attivo ho sempre lo stesso problema..
Mi era già capitato una cosa simile ma con nautilus e avevo risolto modificando in un certo modo lo xorg.conf nella sezione della scheda video...
l'xorg è questo:
Codice: Seleziona tutto
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Thu Nov 9 17:55:59 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Generic Keyboard"
# Driver "kbd"
# Option "CoreKeyboard"
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "it"
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# # Option "Protocol" "ImPS/2"
# Option "Protocol" "ExplorerPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons" "false"
# Option "ButtonMapping" "1 2 3 6 7"
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "stylus"
# Driver "wacom"
# Option "Device" "/dev/input/wacom"
# Option "Type" "stylus"
# Option "ForceDevice" "ISDV4"# Tablet PC ONLY
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "eraser"
# Driver "wacom"
# Option "Device" "/dev/input/wacom"
# Option "Type" "eraser"
# Option "ForceDevice" "ISDV4"# Tablet PC ONLY
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "cursor"
# Driver "wacom"
# Option "Device" "/dev/input/wacom"
# Option "Type" "cursor"
# Option "ForceDevice" "ISDV4"# Tablet PC ONLY
#EndSection
Section "ServerLayout"
# commented out by update-manager, HAL is now used
# InputDevice "Generic Keyboard"
# commented out by update-manager, HAL is now used
# InputDevice "Configured Mouse"
# commented out by update-manager, HAL is now used
# InputDevice "stylus" "SendCoreEvents"
# commented out by update-manager, HAL is now used
# InputDevice "cursor" "SendCoreEvents"
# commented out by update-manager, HAL is now used
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "HSD HW191D"
HorizSync 30.0 - 80.0
VertRefresh 49.0 - 75.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GT"
Option "Coolbits" "1"
Option "NoLogo" "True"
EndSection
Section "Screen"
# Removed Option "metamodes" "1440x900_75 +0+0; 1024x768_66 +0+0; 1024x768 +0+0; 832x624 +0+0; 800x600 +0+0; 640x480 +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBVisuals" "True"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "AllowGLXWithComposite" "True"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionmentre nell'.xsession-errors immediatamente dopo l'avvio ho questi errori:
Codice: Seleziona tutto
/etc/gdm/Xsession: Beginning session setup...
I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
I: caps.c: Dropping root privileges.
I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
GNOME_KEYRING_SOCKET=/tmp/keyring-pF7tMY/socket
SSH_AUTH_SOCK=/tmp/keyring-pF7tMY/socket.ssh
(gnome-settings-daemon:4173): GLib-CRITICAL **: g_propagate_error: assertion `src != NULL' failed
Failed to play sound: Sound disabled
** (gnome-panel:4181): DEBUG: Adding applet 0.
** (gnome-panel:4181): DEBUG: Initialized Panel Applet Signaler.
** (gnome-panel:4181): DEBUG: Adding applet 1.
** (gnome-panel:4181): DEBUG: Adding applet 2.
** (gnome-panel:4181): DEBUG: Adding applet 3.
** (gnome-panel:4181): DEBUG: Adding applet 4.
** (gnome-panel:4181): DEBUG: Adding applet 5.
** (gnome-panel:4181): DEBUG: Adding applet 6.
** (gnome-panel:4181): DEBUG: Adding applet 7.
** (gnome-panel:4181): DEBUG: Adding applet 8.
** (gnome-panel:4181): DEBUG: Adding applet 9.
** (nautilus:4193): WARNING **: Unable to add monitor: Non supportato
** (gnome-panel:4181): DEBUG: Adding applet 10.
** (nautilus:4193): WARNING **: Can not calculate _NET_NUMBER_OF_DESKTOPS
** (nautilus:4193): WARNING **: Can not calculate _NET_NUMBER_OF_DESKTOPS
** (nautilus:4193): WARNING **: Can not get _NET_WORKAREA
** (nautilus:4193): WARNING **: Can not determine workarea, guessing at layout
** (gnome-panel:4181): DEBUG: Adding applet 11.
** (gnome-panel:4181): DEBUG: Adding applet 12.
** (gnome-panel:4181): DEBUG: Adding applet 13.
(gnome-panel:4181): Gdk-WARNING **: /build/buildd/gtk+2.0-2.16.1/gdk/x11/gdkdrawable-x11.c:878 drawable is not a pixmap or window
(gnome-panel:4181): libglade-WARNING **: Unexpected element <requires-version> inside <glade-interface>.
** (gnome-panel:4181): DEBUG: Adding applet 14.
** (gnome-panel:4181): DEBUG: Adding applet 15.
Do: Fatal IO error 11 (Risorsa temporaneamente non disponibile) on X server :0.0.
** (gnome-panel:4181): DEBUG: Adding applet 16.credo che il problema sia in
Codice: Seleziona tutto
** (nautilus:4193): WARNING **: Unable to add monitor: Non supportatoCodice: Seleziona tutto
** (nautilus:4193): WARNING **: Can not calculate _NET_NUMBER_OF_DESKTOPS
** (nautilus:4193): WARNING **: Can not calculate _NET_NUMBER_OF_DESKTOPS
** (nautilus:4193): WARNING **: Can not get _NET_WORKAREA
** (nautilus:4193): WARNING **: Can not determine workarea, guessing at layoutQuesto errore qui invece pare sia l'applet clock da come ho visto nelle varie ricerche di oggi ma anche se tolgo l'applet non risolvo
Codice: Seleziona tutto
(gnome-panel:4181): Gdk-WARNING **: /build/buildd/gtk+2.0-2.16.1/gdk/x11/gdkdrawable-x11.c:878 drawable is not a pixmap or window
(gnome-panel:4181): libglade-WARNING **: Unexpected element <requires-version> inside <glade-interface>.Codice: Seleziona tutto
Fallimento: Inizializzazione del modulo non riuscitaNel daemon.log ho
Codice: Seleziona tutto
May 20 20:03:21 illusion-linux console-kit-daemon[2952]: WARNING: Couldn't read /proc/2951/environ: Failed to open file '/proc/2951/environ': No such file or directory 