ma che comando è ? mi ha dato questo...
Codice: Seleziona tutto
bled.
[ 0.407802] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[ 0.407951] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.408112] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.408262] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
[ 0.408411] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 0.408561] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
[ 0.408710] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 0.408859] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.409009] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 0.409161] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 0.409309] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.409459] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 0.409608] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 0.409757] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[ 0.409937] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.410114] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.410290] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.410468] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.410644] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[ 0.410820] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.410995] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.411171] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.411347] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.411524] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.411700] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[ 0.411879] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.412067] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.412244] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.412421] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.412597] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.412774] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.412951] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.413128] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.413304] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.413412] ACPI: WMI: Mapper loaded
[ 0.413459] SCSI subsystem initialized
[ 0.413459] libata version 3.00 loaded.
[ 0.413459] usbcore: registered new interface driver usbfs
[ 0.413459] usbcore: registered new interface driver hub
[ 0.413459] usbcore: registered new device driver usb
[ 0.413459] PCI: Using ACPI for IRQ routing
[ 0.424008] Bluetooth: Core ver 2.13
[ 0.424017] NET: Registered protocol family 31
[ 0.424017] Bluetooth: HCI device and connection manager initialized
[ 0.424017] Bluetooth: HCI socket layer initialized
[ 0.424017] NET: Registered protocol family 8
[ 0.424017] NET: Registered protocol family 20
[ 0.424022] NetLabel: Initializing
[ 0.424023] NetLabel: domain hash size = 128
[ 0.424024] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.424033] NetLabel: unlabeled traffic allowed by default
[ 0.424165] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.424168] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.428050] AppArmor: AppArmor Filesystem Enabled
[ 0.432012] Switched to high resolution mode on CPU 0
[ 0.432148] Switched to high resolution mode on CPU 1
[ 0.440012] pnp: PnP ACPI init
[ 0.440018] ACPI: bus type pnp registered
[ 0.444221] pnp: PnP ACPI: found 15 devices
[ 0.444222] ACPI: ACPI bus type pnp unregistered
[ 0.444227] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.444229] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.444230] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.444232] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.444233] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.444235] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.444238] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.444240] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.444241] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.444246] system 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.444249] system 00:0e: iomem range 0xcca00-0xcffff has been reserved
[ 0.444250] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.444252] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.444254] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
[ 0.444255] system 00:0e: iomem range 0xfefff000-0xfefff0ff has been reserved
[ 0.444257] system 00:0e: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.444259] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.444260] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.444262] system 00:0e: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.444263] system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.444265] system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.444267] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.444268] system 00:0e: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.444270] system 00:0e: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.444272] system 00:0e: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.448888] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.448890] pci 0000:00:04.0: IO window: 0xd000-0xdfff
[ 0.448892] pci 0000:00:04.0: MEM window: 0xf8000000-0xfbffffff
[ 0.448894] pci 0000:00:04.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.448896] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[ 0.448897] pci 0000:00:0e.0: IO window: disabled
[ 0.448899] pci 0000:00:0e.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.448901] pci 0000:00:0e.0: PREFETCH window: disabled
[ 0.448904] pci 0000:00:16.0: PCI bridge, secondary bus 0000:03
[ 0.448905] pci 0000:00:16.0: IO window: 0xc000-0xcfff
[ 0.448907] pci 0000:00:16.0: MEM window: 0xfde00000-0xfdefffff
[ 0.448909] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.448915] pci 0000:00:04.0: setting latency timer to 64
[ 0.448919] pci 0000:00:0e.0: setting latency timer to 64
[ 0.448922] pci 0000:00:16.0: setting latency timer to 64
[ 0.448924] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.448926] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.448927] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 0.448928] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
[ 0.448930] bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
[ 0.448931] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.448932] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.448933] bus: 02 index 1 mmio: [0xfdf00000-0xfdffffff]
[ 0.448934] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.448935] bus: 02 index 3 io port: [0x00-0xffff]
[ 0.448937] bus: 02 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.448938] bus: 03 index 0 io port: [0xc000-0xcfff]
[ 0.448939] bus: 03 index 1 mmio: [0xfde00000-0xfdefffff]
[ 0.448940] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.448941] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.448947] NET: Registered protocol family 2
[ 0.484048] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.484360] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.485661] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.486069] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.486071] TCP reno registered
[ 0.496088] NET: Registered protocol family 1
[ 0.496173] checking if image is initramfs... it is
[ 0.883901] Freeing initrd memory: 7757k freed
[ 0.887277] audit: initializing netlink socket (disabled)
[ 0.887291] type=2000 audit(1244185060.884:1): initialized
[ 0.892667] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.893465] VFS: Disk quotas dquot_6.5.1
[ 0.893499] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.893884] fuse init (API version 7.10)
[ 0.893932] msgmni has been set to 3971
[ 0.894070] alg: No test for stdrng (krng)
[ 0.894080] io scheduler noop registered
[ 0.894081] io scheduler anticipatory registered
[ 0.894082] io scheduler deadline registered
[ 0.894109] io scheduler cfq registered (default)
[ 0.894119] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.894144] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 0.908538] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.908546] pci 0000:00:0d.1: Enabling HT MSI Mapping
[ 0.908553] pci 0000:00:0d.2: Enabling HT MSI Mapping
[ 0.908559] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.908568] pci 0000:00:0e.1: Enabling HT MSI Mapping
[ 0.908577] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.908587] pci 0000:00:11.0: Enabling HT MSI Mapping
[ 0.908595] pci 0000:00:16.0: Enabling HT MSI Mapping
[ 0.908607] pci 0000:01:00.0: Boot video device
[ 0.914084] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 0.914100] pcieport-driver 0000:00:04.0: found MSI capability
[ 0.914111] pcieport-driver 0000:00:04.0: irq 2303 for MSI/MSI-X
[ 0.914116] pci_express 0000:00:04.0:pcie00: allocate port service
[ 0.914124] pci_express 0000:00:04.0:pcie03: allocate port service
[ 0.914149] pcieport-driver 0000:00:16.0: setting latency timer to 64
[ 0.914170] pcieport-driver 0000:00:16.0: found MSI capability
[ 0.914182] pcieport-driver 0000:00:16.0: irq 2302 for MSI/MSI-X
[ 0.914187] pci_express 0000:00:16.0:pcie00: allocate port service
[ 0.914194] pci_express 0000:00:16.0:pcie03: allocate port service
[ 0.914229] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.914234] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.914330] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.914332] ACPI: Power Button (FF) [PWRF]
[ 0.914358] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.914359] ACPI: Power Button (CM) [PWRB]
[ 0.914397] fan PNP0C0B:00: registered as cooling_device0
[ 0.914400] ACPI: Fan [FAN] (on)
[ 0.914643] processor ACPI_CPU:00: registered as cooling_device1
[ 0.914664] processor ACPI_CPU:01: registered as cooling_device2
[ 0.918859] ACPI Warning (nspredef-0858): \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference [20080926]
[ 0.918864] ACPI: Expecting a [Reference] package element, found type 0
[ 0.919122] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.919495] ACPI: Thermal Zone [THRM] (40 C)
[ 0.944651] Linux agpgart interface v0.103
[ 0.944658] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 0.944742] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.944946] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.945422] brd: module loaded
[ 0.945618] loop: module loaded
[ 0.945660] Fixed MDIO Bus: probed
[ 0.945664] PPP generic driver version 2.4.2
[ 0.945700] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.945718] Driver 'sd' needs updating - please use bus_type methods
[ 0.945723] Driver 'sr' needs updating - please use bus_type methods
[ 0.945806] sata_sil24 0000:03:00.0: version 1.1
[ 0.946082] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.946091] sata_sil24 0000:03:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.946150] sata_sil24 0000:03:00.0: setting latency timer to 64
[ 0.946341] scsi0 : sata_sil24
[ 0.946424] scsi1 : sata_sil24
[ 0.946447] ata1: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdef8000 irq 16
[ 0.946450] ata2: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdefa000 irq 16
[ 3.024025] ata1: SATA link down (SStatus 0 SControl 0)
[ 5.104026] ata2: SATA link down (SStatus 0 SControl 0)
[ 5.104073] sata_nv 0000:00:0d.0: version 3.5
[ 5.104329] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 5.104335] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 5.104337] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 5.104605] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 5.104740] scsi2 : sata_nv
[ 5.104787] scsi3 : sata_nv
[ 5.104900] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23
[ 5.104902] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23
[ 5.838308] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.716035] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.761298] ata4.00: ATA-7: MAXTOR STM3160215AS, 3.AAD, max UDMA/133
[ 6.761300] ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 6.827936] ata4.00: configured for UDMA/133
[ 6.827956] isa bounce pool size: 16 pages
[ 6.828014] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[ 6.828074] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 6.828085] sd 3:0:0:0: [sda] Write Protect is off
[ 6.828086] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.828102] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.828151] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 6.828160] sd 3:0:0:0: [sda] Write Protect is off
[ 6.828161] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.828175] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.828177] sda: sda1 sda2 < sda5 sda6 >
[ 6.895608] sd 3:0:0:0: [sda] Attached SCSI disk
[ 6.895640] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 6.895912] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 6.895919] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 6.895921] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 6.896179] sata_nv 0000:00:0d.1: setting latency timer to 64
[ 6.896326] scsi4 : sata_nv
[ 6.896378] scsi5 : sata_nv
[ 6.896490] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22
[ 6.896492] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22
[ 7.630303] ata5: SATA link down (SStatus 0 SControl 300)
[ 8.508036] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.516136] ata6.00: ATAPI: ASUS DRW-2014L1T, 1.00, max UDMA/66
[ 8.532142] ata6.00: configured for UDMA/66
[ 8.532803] scsi 5:0:0:0: CD-ROM ASUS DRW-2014L1T 1.00 PQ: 0 ANSI: 5
[ 8.535890] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 8.535892] Uniform CD-ROM driver Revision: 3.20
[ 8.535952] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 8.535973] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 8.536235] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 8.536241] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 8.536243] sata_nv 0000:00:0d.2: Using SWNCQ mode
[ 8.536498] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 8.536642] scsi6 : sata_nv
[ 8.536691] scsi7 : sata_nv
[ 8.536800] ata7: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 21
[ 8.536802] ata8: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 21
[ 9.270307] ata7: SATA link down (SStatus 0 SControl 300)
[ 10.002312] ata8: SATA link down (SStatus 0 SControl 300)
[ 10.002379] pata_amd 0000:00:0c.0: version 0.3.10
[ 10.002400] pata_amd 0000:00:0c.0: setting latency timer to 64
[ 10.002477] scsi8 : pata_amd
[ 10.002533] scsi9 : pata_amd
[ 10.002934] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
[ 10.002936] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
[ 10.166875] ata10: port disabled. ignoring.
[ 10.167150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.167409] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 10.167415] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
[ 10.167422] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[ 10.167424] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 10.167464] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[ 10.167485] ehci_hcd 0000:00:0a.1: debug port 1
[ 10.167488] ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported
[ 10.167502] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000
[ 10.176014] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 10.176060] usb usb1: configuration #1 chosen from 1 choice
[ 10.176078] hub 1-0:1.0: USB hub found
[ 10.176083] hub 1-0:1.0: 10 ports detected
[ 10.176149] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.176406] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 10.176408] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 10.176414] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 10.176416] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 10.176440] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[ 10.176449] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
[ 10.234028] usb usb2: configuration #1 chosen from 1 choice
[ 10.234041] hub 2-0:1.0: USB hub found
[ 10.234047] hub 2-0:1.0: 10 ports detected
[ 10.234106] uhci_hcd: USB Universal Host Controller Interface driver
[ 10.234155] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 10.234465] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 10.234468] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 10.244531] mice: PS/2 mouse device common for all mice
[ 10.280551] rtc_cmos 00:05: RTC can wake from S4
[ 10.280578] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 10.280610] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 10.280647] device-mapper: uevent: version 1.0.3
[ 10.280710] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 10.280837] device-mapper: multipath: version 1.0.5 loaded
[ 10.280839] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 10.280985] cpuidle: using governor ladder
[ 10.280986] cpuidle: using governor menu
[ 10.281263] TCP cubic registered
[ 10.281307] NET: Registered protocol family 10
[ 10.281572] lo: Disabled Privacy Extensions
[ 10.281753] NET: Registered protocol family 17
[ 10.281765] Bluetooth: L2CAP ver 2.11
[ 10.281765] Bluetooth: L2CAP socket layer initialized
[ 10.281767] Bluetooth: SCO (Voice Link) ver 0.6
[ 10.281768] Bluetooth: SCO socket layer initialized
[ 10.281805] Bluetooth: RFCOMM socket layer initialized
[ 10.281810] Bluetooth: RFCOMM TTY layer initialized
[ 10.281811] Bluetooth: RFCOMM ver 1.10
[ 10.281846] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[ 10.281863] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[ 10.282032] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[ 10.282240] registered taskstats version 1
[ 10.282357] Magic number: 13:450:973
[ 10.282432] rtc_cmos 00:05: setting system clock to 2009-06-05 06:57:51 UTC (1244185071)
[ 10.282434] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 10.282435] EDD information not available.
[ 10.282461] Freeing unused kernel memory: 532k freed
[ 10.282655] Write protecting the kernel read-only data: 6684k
[ 10.301926] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 10.480697] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 10.481043] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 10.481047] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[ 10.481061] forcedeth 0000:00:10.0: setting latency timer to 64
[ 10.481118] nv_probe: set workaround bit for reversed mac addr
[ 10.500989] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 10.500994] ohci1394 0000:02:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[ 10.544517] usb 1-9: new high speed USB device using ehci_hcd and address 3
[ 10.550695] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 10.580553] Floppy drive(s): fd0 is 1.44M
[ 10.600521] FDC 0 is a post-1991 82077
[ 10.684727] usb 1-9: configuration #1 chosen from 1 choice
[ 11.004755] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:91:09:1c
[ 11.004758] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 11.005081] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[ 11.005084] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
[ 11.005087] forcedeth 0000:00:11.0: setting latency timer to 64
[ 11.005128] nv_probe: set workaround bit for reversed mac addr
[ 11.005632] usb 2-6: new low speed USB device using ohci_hcd and address 2
[ 11.219115] usb 2-6: configuration #1 chosen from 1 choice
[ 11.226628] usbcore: registered new interface driver hiddev
[ 11.233231] input: Weltrend Bar Code Reader as /devices/pci0000:00/0000:00:0a.0/usb2/2-6/2-6:1.0/input/input4
[ 11.260118] generic-usb 0003:040B:6510.0001: input,hidraw0: USB HID v1.10 Keyboard [Weltrend Bar Code Reader] on usb-0000:00:0a.0-6/input0
[ 11.260131] usbcore: registered new interface driver usbhid
[ 11.260133] usbhid: v2.6:USB HID core driver
[ 11.524665] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:91:11:c1
[ 11.524668] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 11.751232] PM: Starting manual resume from disk
[ 11.751234] PM: Resume from partition 8:5
[ 11.751235] PM: Checking hibernation image.
[ 11.751377] PM: Resume from disk failed.
[ 11.779433] EXT4-fs: barriers enabled
[ 11.790247] kjournald2 starting. Commit interval 5 seconds
[ 11.790254] EXT4-fs: delayed allocation enabled
[ 11.790255] EXT4-fs: file extents enabled
[ 11.795636] EXT4-fs: mballoc enabled
[ 11.795639] EXT4-fs: mounted filesystem with ordered data mode.
[ 11.836584] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000eca1c4]
[ 16.318611] udev: starting version 141
[ 17.741339] nvidia: module license 'NVIDIA' taints kernel.
[ 17.794523] ACPI: I/O resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05]
[ 17.794525] ACPI: Device needs an ACPI driver
[ 17.794567] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 17.794592] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 17.849852] parport_pc 00:0a: reported by Plug and Play ACPI
[ 17.849878] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 17.867979] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 17.941373] ppdev: user-space parallel port driver
[ 17.984535] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
[ 17.984545] resource map sanity check conflict: 0xff000000 0xffffffff 0xfff80000 0xfff80fff pnp 00:0e
[ 17.984550] ------------[ cut here ]------------
[ 17.984552] WARNING: at /build/buildd/linux-2.6.28/arch/x86/mm/ioremap.c:226 __ioremap_caller+0x349/0x390()
[ 17.984553] Modules linked in: ck804xrom(+) mtd chipreg ppdev snd map_funcs psmouse serio_raw pcspkr(+) parport_pc parport soundcore snd_page_alloc i2c_nforce2 cfg80211(+) nvidia(P+) k8temp usbhid floppy ohci1394 ieee1394 forcedeth fbcon tileblit font bitblit softcursor
[ 17.984566] Pid: 978, comm: modprobe Tainted: P 2.6.28-12-generic #43-Ubuntu
[ 17.984567] Call Trace:
[ 17.984572] [<ffffffff802509bf>] warn_on_slowpath+0x5f/0x90
[ 17.984575] [<ffffffff8022f669>] ? default_spin_lock_flags+0x9/0x10
[ 17.984577] [<ffffffff8022f669>] ? default_spin_lock_flags+0x9/0x10
[ 17.984579] [<ffffffff80236c29>] __ioremap_caller+0x349/0x390
[ 17.984582] [<ffffffffa09062db>] ? ck804xrom_init_one+0x1ab/0x5ca [ck804xrom]
[ 17.984584] [<ffffffff80236d82>] ioremap_nocache+0x12/0x20
[ 17.984586] [<ffffffffa09062db>] ck804xrom_init_one+0x1ab/0x5ca [ck804xrom]
[ 17.984589] [<ffffffffa090c041>] init_ck804xrom+0x41/0x59 [ck804xrom]
[ 17.984591] [<ffffffffa090c000>] ? init_ck804xrom+0x0/0x59 [ck804xrom]
[ 17.984594] [<ffffffff8020a03b>] do_one_initcall+0x3b/0x170
[ 17.984597] [<ffffffff802424b2>] ? enqueue_entity+0x122/0x2b0
[ 17.984599] [<ffffffff8024870b>] ? enqueue_task_fair+0x7b/0x80
[ 17.984601] [<ffffffff8023e2a9>] ? wakeup_preempt_entity+0x59/0x60
[ 17.984603] [<ffffffff80249330>] ? check_preempt_wakeup+0x210/0x230
[ 17.984605] [<ffffffff8024a3cc>] ? try_to_wake_up+0x12c/0x2e0
[ 17.984608] [<ffffffff8027ef9d>] sys_init_module+0xad/0x1e0
[ 17.984610] [<ffffffff8021253a>] system_call_fastpath+0x16/0x1b
[ 17.984612] ---[ end trace 2aca61bd2e893fcc ]---
[ 17.994439] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 17.994444] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 17.994449] nvidia 0000:01:00.0: setting latency timer to 64
[ 17.994614] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.44 Tue Mar 24 05:46:32 PST 2009
[ 18.008140] cfg80211: Calling CRDA to update world regulatory domain
[ 18.016286] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 18.185912] cfg80211: World regulatory domain updated:
[ 18.185914] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.185916] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.185918] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.185919] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.185920] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.185922] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.375421] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 18.375425] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 18.375549] HDA Intel 0000:00:0e.1: setting latency timer to 64
[ 18.437143] phy0: Selected rate control algorithm 'pid'
[ 18.496640] phy0: hwaddr 00:15:af:08:cd:5b, RTL8187vB (default) V1 + rtl8225z2
[ 18.496660] usbcore: registered new interface driver rtl8187
[ 19.149696] input: ImExPS/2 Logitech MX Mouse as /devices/platform/i8042/serio1/input/input6
[ 19.250754] lp0: using parport0 (interrupt-driven).
[ 19.275710] it87: Found IT8716F chip at 0x290, revision 1
[ 19.275719] it87: in3 is VCC (+5V)
[ 19.275720] it87: in7 is VCCH (+5V Stand-By)
[ 19.500397] Adding 6040400k swap on /dev/sda5. Priority:-1 extents:1 across:6040400k
[ 20.029753] EXT4 FS on sda6, internal journal on sda6:8
[ 20.806320] EXT4-fs: barriers enabled
[ 20.823838] kjournald2 starting. Commit interval 5 seconds
[ 20.824101] EXT4 FS on sda1, internal journal on sda1:8
[ 20.824103] EXT4-fs: delayed allocation enabled
[ 20.824104] EXT4-fs: file extents enabled
[ 20.834728] EXT4-fs: mballoc enabled
[ 20.834731] EXT4-fs: mounted filesystem with ordered data mode.
[ 21.038833] type=1505 audit(1244185082.254:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2175
[ 21.068870] type=1505 audit(1244185082.286:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2179
[ 21.068968] type=1505 audit(1244185082.286:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2179
[ 21.068999] type=1505 audit(1244185082.286:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2179
[ 21.069029] type=1505 audit(1244185082.286:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2179
[ 21.156523] type=1505 audit(1244185082.374:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2184
[ 21.156669] type=1505 audit(1244185082.374:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2184
[ 21.176768] type=1505 audit(1244185082.394:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2188
[ 30.553128] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.553130] Bluetooth: BNEP filters: protocol multicast
[ 30.587456] Bridge firewalling registered
[ 35.782901] forcedeth 0000:00:11.0: irq 2301 for MSI/MSI-X
[ 35.783111] eth1: no link during initialization.
[ 35.783684] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 35.784827] forcedeth 0000:00:10.0: irq 2300 for MSI/MSI-X
[ 44.402056] ADDRCONF(NETDEV_UP): wlan0: link is not ready
mi spaventano gli IRQ...