Pagina 1 di 1
Usb non funzionano più
Inviato: domenica 24 maggio 2009, 21:21
da edino
Ciao dopo un riavvio di sitema senza smontare un lettore mp4 che stava caricando della musica (dimenticato)

non mi funzionano più le porte usb non caricano più gli HD esterni le chiavette di memoria le leggono ma non mi fanno mettere dati o toglierli.
Sapreste darmi indicazioni di cosa può essere successo?
Vi Ringrazio Buona Serata
edino

Re: Usb non funzionano più
Inviato: lunedì 25 maggio 2009, 5:17
da c.realkiller
Re: Usb non funzionano più
Inviato: lunedì 25 maggio 2009, 17:37
da edino
Mi da questo
Codice: Seleziona tutto
desktop:~$ lsusb
Bus 001 Device 002: ID 0ace:1215 ZyDAS WLA-54L WiFi
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Re: Usb non funzionano più
Inviato: lunedì 25 maggio 2009, 19:36
da c.realkiller
edino ha scritto:
Mi da questo
Codice: Seleziona tutto
desktop:~$ lsusb
Bus 001 Device 002: ID 0ace:1215 ZyDAS WLA-54L WiFi
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
per me le porte sono a posto, la pena wi-fi è vista e il lettore è visto, magari non è un problema di porte, ma di moduli che non si caricano.
posta
Re: Usb non funzionano più
Inviato: lunedì 25 maggio 2009, 20:24
da edino
Penso che hai ragione

effetivamente adesso mi carica le pennette ma le cartelle sono con la X rossa e mi dice che i file sono di sola lettura a volte non carica affatto e continua ad andarmi in crash
mi diventano le finestre nere e non si muove + nulla

ti posto: dmesg | grep -i usb
Codice: Seleziona tutto
-desktop:~$ dmesg | grep -i usb
[ 0.529235] usbcore: registered new interface driver usbfs
[ 0.529251] usbcore: registered new interface driver hub
[ 0.529271] usbcore: registered new device driver usb
[ 4.568475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.568582] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 4.568608] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 4.580017] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 4.580098] usb usb1: configuration #1 chosen from 1 choice
[ 4.580122] hub 1-0:1.0: USB hub found
[ 4.580249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.580314] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 4.640050] usb usb2: configuration #1 chosen from 1 choice
[ 4.640071] hub 2-0:1.0: USB hub found
[ 4.640212] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 4.700052] usb usb3: configuration #1 chosen from 1 choice
[ 4.700072] hub 3-0:1.0: USB hub found
[ 4.700211] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 4.760048] usb usb4: configuration #1 chosen from 1 choice
[ 4.760068] hub 4-0:1.0: USB hub found
[ 4.760214] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 4.820048] usb usb5: configuration #1 chosen from 1 choice
[ 4.820068] hub 5-0:1.0: USB hub found
[ 4.820205] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 4.880055] usb usb6: configuration #1 chosen from 1 choice
[ 4.880076] hub 6-0:1.0: USB hub found
[ 4.880171] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.904037] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 20.018020] usb 1-1: device descriptor read/64, error -110
[ 35.232023] usb 1-1: device descriptor read/64, error -110
[ 35.448022] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 50.560020] usb 1-1: device descriptor read/64, error -110
[ 65.776018] usb 1-1: device descriptor read/64, error -110
[ 65.992018] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 71.012045] usb 1-1: device descriptor read/8, error -110
[ 76.132102] usb 1-1: device descriptor read/8, error -110
[ 76.348017] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 81.368051] usb 1-1: device descriptor read/8, error -110
[ 86.488111] usb 1-1: device descriptor read/8, error -110
[ 86.592022] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 86.716019] usb 1-2: new high speed USB device using ehci_hcd and address 6
[ 86.848871] usb 1-2: configuration #1 chosen from 1 choice
[ 87.180020] usb 1-2: reset high speed USB device using ehci_hcd and address 6
[ 87.351681] usbcore: registered new interface driver zd1211rw
[ 87.448032] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 102.584019] usb 2-1: device descriptor read/64, error -110
[ 117.824018] usb 2-1: device descriptor read/64, error -110
[ 118.064014] usb 2-1: new full speed USB device using ohci_hcd and address 3
[ 133.200015] usb 2-1: device descriptor read/64, error -110
[ 148.440017] usb 2-1: device descriptor read/64, error -110
[ 148.680015] usb 2-1: new full speed USB device using ohci_hcd and address 4
[ 153.701041] usb 2-1: device descriptor read/8, error -110
[ 158.821041] usb 2-1: device descriptor read/8, error -110
[ 159.060014] usb 2-1: new full speed USB device using ohci_hcd and address 5
[ 164.080042] usb 2-1: device descriptor read/8, error -110
[ 169.200046] usb 2-1: device descriptor read/8, error -110
[ 169.304035] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 169.568094] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 169.743066] usb 4-1: configuration #1 chosen from 1 choice
[ 170.102254] Initializing USB Mass Storage driver...
[ 170.103658] scsi6 : SCSI emulation for USB Mass Storage devices
[ 170.103964] usbcore: registered new interface driver usb-storage
[ 170.103969] USB Mass Storage support registered.
[ 170.113677] usb-storage: device found at 2
[ 170.113680] usb-storage: waiting for device to settle before scanning
[ 174.391838] usb 1-2: firmware: requesting zd1211/zd1211b_ub
[ 174.516625] usb 1-2: firmware: requesting zd1211/zd1211b_uphr
[ 175.113159] usb-storage: device scan complete
[ 175.119155] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 175.125148] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 175.131151] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 175.137147] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 6225.184030] usb 1-1: new high speed USB device using ehci_hcd and address 8
[ 6225.381945] usb 1-1: configuration #1 chosen from 1 choice
[ 6225.421284] scsi7 : SCSI emulation for USB Mass Storage devices
[ 6225.423842] usb-storage: device found at 8
[ 6225.423848] usb-storage: waiting for device to settle before scanning
[ 6230.420350] usb-storage: device scan complete
[ 6281.028067] usb 1-9: new high speed USB device using ehci_hcd and address 9
[ 6281.208434] usb 1-9: configuration #1 chosen from 1 choice
[ 6281.237661] scsi8 : SCSI emulation for USB Mass Storage devices
[ 6281.256674] usb-storage: device found at 9
[ 6281.256680] usb-storage: waiting for device to settle before scanning
[ 6286.256254] usb-storage: device scan complete
[ 6286.256936] scsi 8:0:0:0: Direct-Access USB 2.0 SD MMC Reader PQ: 0 ANSI: 0 CCS
[ 6452.166620] usb 1-9: USB disconnect, address 9
[ 6572.964502] usb 1-1: USB disconnect, address 8
[ 6585.424033] usb 1-9: new high speed USB device using ehci_hcd and address 10
[ 6585.579342] usb 1-9: configuration #1 chosen from 1 choice
[ 6585.581226] scsi9 : SCSI emulation for USB Mass Storage devices
[ 6585.581674] usb-storage: device found at 10
[ 6585.581678] usb-storage: waiting for device to settle before scanning
[ 6590.580433] usb-storage: device scan complete
[ 6729.344999] usb 1-9: USB disconnect, address 10
[ 6737.352093] usb 1-9: new high speed USB device using ehci_hcd and address 11
[ 6737.553643] usb 1-9: configuration #1 chosen from 1 choice
[ 6737.605646] scsi10 : SCSI emulation for USB Mass Storage devices
[ 6737.605897] usb-storage: device found at 11
[ 6737.605902] usb-storage: waiting for device to settle before scanning
[ 6742.604255] usb-storage: device scan complete
Ti Ringrazio x la cortese attenzione (b2b)
Buona Serata
edino
Re: Usb non funzionano più
Inviato: martedì 26 maggio 2009, 0:16
da c.realkiller
per le x rossa basta che cambi i permessi alle cartelle con chmod +x e gli dai i permessi che vuoi se vuoi dagli tutti i permessi a tutto 777 quindi chmod +x 777 altrimenti ti rimando al wiki
/AmministrazioneSistema/PermessiFile?highlight=(permessi)
nel file da te allegato cè un errore -110 ma non so cosa sia.
Re: Usb non funzionano più
Inviato: martedì 26 maggio 2009, 15:07
da edino
Ok! X rosse sistemate (good) ti ringrazio ora sto cercando x sistemare il resto spulciando un pò
Buona Giornata
edino
