Pagina 2 di 2

Re: [Audio] Nessuno!

Inviato: domenica 31 maggio 2009, 12:17
da Vituz
erbasox ha scritto: Posta il risultato di:

Codice: Seleziona tutto

sudo asoundconf list
(b2b)
Please note that you are attempting to run asoundconf as a privileged superuser, which may have unintended consequences.

Names of available sound cards:
ICH5

Re: [Audio] Nessuno!

Inviato: domenica 31 maggio 2009, 12:20
da erbasox
Dai i seguenti comandi:

Codice: Seleziona tutto

sudo asoundconf set-default-card "ICH5"
sudo aptitude install module-assistant
sudo m-a update
sudo m-a prepare
sudo m-a a-i alsa
sudo apt-get install alsa-utils
riavvia il pc poi dai il seguente comando:

Codice: Seleziona tutto

alsamixer -V all
regola i volumi scorrendo con le freccette con il tasto m attivi i canali

(b2b)

Re: [Audio] Nessuno!

Inviato: domenica 31 maggio 2009, 12:35
da ilmaredinverno
Io ho lo stesso problema  >:( (anche io ho aggiornato ubuntu e non sento una ceppa dalle casse!!!)

Ma se vado in Sistema > Preferenze > Audio

Faccio i test, li sento... e per di più se apro youtube e faccio girare un video e lascio in esecuzione il test l'audio torna, ma quando chiudo... scompare :o

Il test che lasciato in esecuzione mi fa sentire l'audio è Audioconferenza > Acquisizione audio... ecco se lascio girare questo si sente tutto perfettamente... non mi pare però un metodo comodo.

Re: [Audio] Nessuno!

Inviato: domenica 31 maggio 2009, 12:40
da erbasox
ilmaredinverno ha scritto: Io ho lo stesso problema  >:( (anche io ho aggiornato ubuntu e non sento una ceppa dalle casse!!!)

Ma se vado in Sistema > Preferenze > Audio

Faccio i test, li sento... e per di più se apro youtube e faccio girare un video e lascio in esecuzione il test l'audio torna, ma quando chiudo... scompare :o
Prova a dare questo comando:

Codice: Seleziona tutto

sudo /etc/init.d/alsa-utils reset
Riavvia e vedi se va

(b2b)

Re: [Audio] Nessuno!

Inviato: domenica 31 maggio 2009, 15:05
da Vituz
ormai ho reinstallato tutto e va!

Re: [Audio] Nessuno!

Inviato: domenica 31 maggio 2009, 16:46
da erbasox
Sei stato un po' drastico in quel modo avresti risolto cmq sono felice che hai risolto  (b2b)

Re: [Audio] Nessuno!

Inviato: domenica 31 maggio 2009, 19:42
da Vituz
erbasox ha scritto: Sei stato un po' drastico in quel modo avresti risolto cmq sono felice che hai risolto  (b2b)
ma ormai avevo già fatto quando l'ho letto! >:(

Re: [Audio] Nessuno!

Inviato: domenica 31 maggio 2009, 20:48
da Drummy
io ho fatto come cè scritto sopra ma non va :'( :'( :'( :'(

Re: [Audio] Nessuno!

Inviato: lunedì 1 giugno 2009, 3:42
da ilmaredinverno
grazie ma mi è uscita sta roba
* Resetting ALSA...                                                            Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
                                                                        [ OK ]

Re: [Audio] Nessuno!

Inviato: lunedì 1 giugno 2009, 7:29
da erbasox
Drummy ha scritto: io ho fatto come cè scritto sopra ma non va :'( :'( :'( :'(
Drummy cosa hai fatto in particolare e non ti funziona?

ilmaredinverno hai provato il:

Codice: Seleziona tutto

sudo /etc/init.d/alsa-utils reset
e ti esce quello?

Re: [Audio] Nessuno!

Inviato: lunedì 1 giugno 2009, 11:37
da ilmaredinverno
erbasox ha scritto:
ilmaredinverno hai provato il:

Codice: Seleziona tutto

sudo /etc/init.d/alsa-utils reset
e ti esce quello?
Esatto :)

Re: [Audio] Nessuno!

Inviato: lunedì 1 giugno 2009, 12:05
da ginalfa
mhhh io credo che il problema sta nel supporto del chip ICH5, visto che il web è pieno di rapporti su bug del kernel o di ALSA riguardanti questo chip.
Ce l'ho anch'io e ci sto impazzendo da mesi senza venirne a capo. >:(
A me il controllo volume master è del tutto ininfluente e posso controllare il volume solo con il cursore PCM di alsamixer.
inoltre l'input del microfono è pure lui latitante con il risultato che skype non può essere usato se non in modalità testo. :'(

Re: [Audio] Nessuno!

Inviato: lunedì 1 giugno 2009, 12:55
da Drummy
Fatto il procedimento sopra e mi esce questo:

* Resetting ALSA...                                                            Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer [command]
Available options:
  -h,--help      this help
  -c,--card N    select the card
  -D,--device N  select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive  show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially
Available commands:
  scontrols      show all mixer simple controls
  scontents   show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
                                                                        [ OK ]
drummy@drummy:~$