problema bios scheda madre
Inviato: venerdì 5 giugno 2009, 12:33
Ciao a tutti dando il comando dmesg mi compare questo:
preciso che all'avio del pc subito dopo grub mi compare questo:
0.918865 ACPI: expecting a [reference] package element, found type 0
avevo aperto un altro 3d che ho chiuso http://forum.ubuntu-it.org/viewtopic.ph ... 8#p2110998
dove il problema era stato parzialmente risolto
Suggerimenti????
Codice: Seleziona tutto
bled.
[ 0.408999] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 0.409149] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
[ 0.409300] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 0.409449] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.409599] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.409749] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.409899] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.410050] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 0.410201] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 0.410351] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[ 0.410532] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.410709] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.410886] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.411062] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.411239] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[ 0.411416] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.411594] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.411772] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.411948] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.412137] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.412314] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[ 0.412490] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.412667] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.412844] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.413021] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.413198] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.413374] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.413551] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.413728] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.413905] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.414014] ACPI: WMI: Mapper loaded
[ 0.414061] SCSI subsystem initialized
[ 0.414061] libata version 3.00 loaded.
[ 0.414061] usbcore: registered new interface driver usbfs
[ 0.414061] usbcore: registered new interface driver hub
[ 0.414061] usbcore: registered new device driver usb
[ 0.414061] PCI: Using ACPI for IRQ routing
[ 0.424031] Bluetooth: Core ver 2.13
[ 0.424057] NET: Registered protocol family 31
[ 0.424057] Bluetooth: HCI device and connection manager initialized
[ 0.424057] Bluetooth: HCI socket layer initialized
[ 0.424057] NET: Registered protocol family 8
[ 0.424057] NET: Registered protocol family 20
[ 0.424057] NetLabel: Initializing
[ 0.424057] NetLabel: domain hash size = 128
[ 0.424057] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.424057] NetLabel: unlabeled traffic allowed by default
[ 0.424191] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.424194] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.432072] AppArmor: AppArmor Filesystem Enabled
[ 0.436026] Switched to high resolution mode on CPU 0
[ 0.436035] Switched to high resolution mode on CPU 1
[ 0.444310] pnp: PnP ACPI init
[ 0.444326] ACPI: bus type pnp registered
[ 0.448593] pnp: PnP ACPI: found 15 devices
[ 0.448595] ACPI: ACPI bus type pnp unregistered
[ 0.448602] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.448603] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.448605] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.448606] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.448608] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.448609] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.448613] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.448614] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.448616] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.448621] system 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.448624] system 00:0e: iomem range 0xcca00-0xcffff has been reserved
[ 0.448626] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.448627] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.448629] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
[ 0.448630] system 00:0e: iomem range 0xfefff000-0xfefff0ff has been reserved
[ 0.448632] system 00:0e: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.448634] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.448635] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.448637] system 00:0e: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.448639] system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.448640] system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.448642] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.448644] system 00:0e: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.448646] system 00:0e: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.448647] system 00:0e: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.453268] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.453270] pci 0000:00:04.0: IO window: 0xd000-0xdfff
[ 0.453272] pci 0000:00:04.0: MEM window: 0xf8000000-0xfbffffff
[ 0.453274] pci 0000:00:04.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.453277] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[ 0.453278] pci 0000:00:0e.0: IO window: disabled
[ 0.453280] pci 0000:00:0e.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.453282] pci 0000:00:0e.0: PREFETCH window: disabled
[ 0.453284] pci 0000:00:16.0: PCI bridge, secondary bus 0000:03
[ 0.453286] pci 0000:00:16.0: IO window: 0xc000-0xcfff
[ 0.453288] pci 0000:00:16.0: MEM window: 0xfde00000-0xfdefffff
[ 0.453290] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.453296] pci 0000:00:04.0: setting latency timer to 64
[ 0.453299] pci 0000:00:0e.0: setting latency timer to 64
[ 0.453303] pci 0000:00:16.0: setting latency timer to 64
[ 0.453305] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.453306] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.453308] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 0.453309] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
[ 0.453310] bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
[ 0.453311] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.453312] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.453313] bus: 02 index 1 mmio: [0xfdf00000-0xfdffffff]
[ 0.453315] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.453316] bus: 02 index 3 io port: [0x00-0xffff]
[ 0.453317] bus: 02 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.453318] bus: 03 index 0 io port: [0xc000-0xcfff]
[ 0.453319] bus: 03 index 1 mmio: [0xfde00000-0xfdefffff]
[ 0.453320] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.453321] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.453330] NET: Registered protocol family 2
[ 0.488355] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.488613] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.489895] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.490301] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.490302] TCP reno registered
[ 0.500380] NET: Registered protocol family 1
[ 0.500463] checking if image is initramfs... it is
[ 0.897123] Freeing initrd memory: 7757k freed
[ 0.900495] audit: initializing netlink socket (disabled)
[ 0.900523] type=2000 audit(1244196733.900:1): initialized
[ 0.905901] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.906701] VFS: Disk quotas dquot_6.5.1
[ 0.906734] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.907116] fuse init (API version 7.10)
[ 0.907165] msgmni has been set to 3971
[ 0.907307] alg: No test for stdrng (krng)
[ 0.907318] io scheduler noop registered
[ 0.907319] io scheduler anticipatory registered
[ 0.907320] io scheduler deadline registered
[ 0.907347] io scheduler cfq registered (default)
[ 0.907356] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.907381] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 0.920788] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.920795] pci 0000:00:0d.1: Enabling HT MSI Mapping
[ 0.920803] pci 0000:00:0d.2: Enabling HT MSI Mapping
[ 0.920809] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.920817] pci 0000:00:0e.1: Enabling HT MSI Mapping
[ 0.920827] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.920836] pci 0000:00:11.0: Enabling HT MSI Mapping
[ 0.920844] pci 0000:00:16.0: Enabling HT MSI Mapping
[ 0.920856] pci 0000:01:00.0: Boot video device
[ 0.926357] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 0.926372] pcieport-driver 0000:00:04.0: found MSI capability
[ 0.926384] pcieport-driver 0000:00:04.0: irq 2303 for MSI/MSI-X
[ 0.926388] pci_express 0000:00:04.0:pcie00: allocate port service
[ 0.926396] pci_express 0000:00:04.0:pcie03: allocate port service
[ 0.926421] pcieport-driver 0000:00:16.0: setting latency timer to 64
[ 0.926443] pcieport-driver 0000:00:16.0: found MSI capability
[ 0.926454] pcieport-driver 0000:00:16.0: irq 2302 for MSI/MSI-X
[ 0.926459] pci_express 0000:00:16.0:pcie00: allocate port service
[ 0.926467] pci_express 0000:00:16.0:pcie03: allocate port service
[ 0.926501] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.926506] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.926602] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.926603] ACPI: Power Button (FF) [PWRF]
[ 0.926630] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.926631] ACPI: Power Button (CM) [PWRB]
[ 0.926669] fan PNP0C0B:00: registered as cooling_device0
[ 0.926672] ACPI: Fan [FAN] (on)
[ 0.926905] ACPI: processor limited to max C-state 1
[ 0.926916] processor ACPI_CPU:00: registered as cooling_device1
[ 0.926937] processor ACPI_CPU:01: registered as cooling_device2
[ 0.931158] ACPI Warning (nspredef-0858): \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference [20080926]
[ 0.931163] ACPI: Expecting a [Reference] package element, found type 0
[ 0.931422] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.931797] ACPI: Thermal Zone [THRM] (40 C)
[ 0.956856] Linux agpgart interface v0.103
[ 0.956863] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 0.956947] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.957153] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.957630] brd: module loaded
[ 0.957819] loop: module loaded
[ 0.957860] Fixed MDIO Bus: probed
[ 0.957864] PPP generic driver version 2.4.2
[ 0.957899] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.957916] Driver 'sd' needs updating - please use bus_type methods
[ 0.957922] Driver 'sr' needs updating - please use bus_type methods
[ 0.958004] sata_sil24 0000:03:00.0: version 1.1
[ 0.958282] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.958291] sata_sil24 0000:03:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.958349] sata_sil24 0000:03:00.0: setting latency timer to 64
[ 0.958554] scsi0 : sata_sil24
[ 0.958640] scsi1 : sata_sil24
[ 0.958663] ata1: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdef8000 irq 16
[ 0.958665] ata2: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdefa000 irq 16
[ 3.036228] ata1: SATA link down (SStatus 0 SControl 0)
[ 5.116227] ata2: SATA link down (SStatus 0 SControl 0)
[ 5.116273] sata_nv 0000:00:0d.0: version 3.5
[ 5.116538] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 5.116545] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 5.116547] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 5.116804] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 5.116939] scsi2 : sata_nv
[ 5.116988] scsi3 : sata_nv
[ 5.117101] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23
[ 5.117103] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23
[ 5.850604] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.728328] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.777697] ata4.00: ATA-7: MAXTOR STM3160215AS, 3.AAD, max UDMA/133
[ 6.777699] ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 6.844339] ata4.00: configured for UDMA/133
[ 6.844358] isa bounce pool size: 16 pages
[ 6.844417] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[ 6.844477] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 6.844487] sd 3:0:0:0: [sda] Write Protect is off
[ 6.844489] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.844511] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.844561] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 6.844569] sd 3:0:0:0: [sda] Write Protect is off
[ 6.844570] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.844585] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.844587] sda: sda1 sda2 < sda5 sda6 >
[ 6.911974] sd 3:0:0:0: [sda] Attached SCSI disk
[ 6.912006] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 6.912278] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 6.912285] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 6.912287] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 6.912559] sata_nv 0000:00:0d.1: setting latency timer to 64
[ 6.912681] scsi4 : sata_nv
[ 6.912728] scsi5 : sata_nv
[ 6.912840] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22
[ 6.912842] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22
[ 7.646603] ata5: SATA link down (SStatus 0 SControl 300)
[ 8.524327] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.532437] ata6.00: ATAPI: ASUS DRW-2014L1T, 1.00, max UDMA/66
[ 8.548447] ata6.00: configured for UDMA/66
[ 8.549700] scsi 5:0:0:0: CD-ROM ASUS DRW-2014L1T 1.00 PQ: 0 ANSI: 5
[ 8.554159] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 8.554161] Uniform CD-ROM driver Revision: 3.20
[ 8.554220] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 8.554241] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 8.554503] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 8.554509] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 8.554510] sata_nv 0000:00:0d.2: Using SWNCQ mode
[ 8.554767] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 8.554916] scsi6 : sata_nv
[ 8.554988] scsi7 : sata_nv
[ 8.555097] ata7: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 21
[ 8.555099] ata8: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 21
[ 9.286509] ata7: SATA link down (SStatus 0 SControl 300)
[ 10.018518] ata8: SATA link down (SStatus 0 SControl 300)
[ 10.018581] pata_amd 0000:00:0c.0: version 0.3.10
[ 10.018602] pata_amd 0000:00:0c.0: setting latency timer to 64
[ 10.018692] scsi8 : pata_amd
[ 10.018744] scsi9 : pata_amd
[ 10.019141] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
[ 10.019142] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
[ 10.183201] ata10: port disabled. ignoring.
[ 10.183486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.183745] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 10.183751] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
[ 10.183758] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[ 10.183759] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 10.183798] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[ 10.183820] ehci_hcd 0000:00:0a.1: debug port 1
[ 10.183823] ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported
[ 10.183836] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000
[ 10.192216] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 10.192262] usb usb1: configuration #1 chosen from 1 choice
[ 10.192280] hub 1-0:1.0: USB hub found
[ 10.192285] hub 1-0:1.0: 10 ports detected
[ 10.192351] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.192619] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 10.192621] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 10.192627] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 10.192629] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 10.192654] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[ 10.192663] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
[ 10.250232] usb usb2: configuration #1 chosen from 1 choice
[ 10.250245] hub 2-0:1.0: USB hub found
[ 10.250251] hub 2-0:1.0: 10 ports detected
[ 10.250310] uhci_hcd: USB Universal Host Controller Interface driver
[ 10.250359] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 10.250668] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 10.250671] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 10.260732] mice: PS/2 mouse device common for all mice
[ 10.296753] rtc_cmos 00:05: RTC can wake from S4
[ 10.296778] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 10.296810] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 10.296846] device-mapper: uevent: version 1.0.3
[ 10.296950] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 10.297098] device-mapper: multipath: version 1.0.5 loaded
[ 10.297100] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 10.297264] cpuidle: using governor ladder
[ 10.297265] cpuidle: using governor menu
[ 10.297556] TCP cubic registered
[ 10.297599] NET: Registered protocol family 10
[ 10.297856] lo: Disabled Privacy Extensions
[ 10.298032] NET: Registered protocol family 17
[ 10.298044] Bluetooth: L2CAP ver 2.11
[ 10.298045] Bluetooth: L2CAP socket layer initialized
[ 10.298047] Bluetooth: SCO (Voice Link) ver 0.6
[ 10.298047] Bluetooth: SCO socket layer initialized
[ 10.298090] Bluetooth: RFCOMM socket layer initialized
[ 10.298094] Bluetooth: RFCOMM TTY layer initialized
[ 10.298095] Bluetooth: RFCOMM ver 1.10
[ 10.298134] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[ 10.298189] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6
[ 10.298192] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8
[ 10.298193] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa
[ 10.298194] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc
[ 10.298195] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe
[ 10.298196] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10
[ 10.298197] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10
[ 10.298199] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12
[ 10.298303] registered taskstats version 1
[ 10.298426] Magic number: 13:600:223
[ 10.298499] rtc_cmos 00:05: setting system clock to 2009-06-05 10:12:24 UTC (1244196744)
[ 10.298501] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 10.298502] EDD information not available.
[ 10.298529] Freeing unused kernel memory: 532k freed
[ 10.298689] Write protecting the kernel read-only data: 6684k
[ 10.318648] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 10.493141] Floppy drive(s): fd0 is 1.44M
[ 10.512336] FDC 0 is a post-1991 82077
[ 10.552227] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 10.552232] ohci1394 0000:02:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[ 10.557842] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 10.558183] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 10.558187] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[ 10.558190] forcedeth 0000:00:10.0: setting latency timer to 64
[ 10.558226] nv_probe: set workaround bit for reversed mac addr
[ 10.564519] usb 1-9: new high speed USB device using ehci_hcd and address 3
[ 10.601931] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 10.703413] usb 1-9: configuration #1 chosen from 1 choice
[ 11.016141] usb 2-6: new low speed USB device using ohci_hcd and address 2
[ 11.076852] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:91:09:1c
[ 11.076855] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 11.077200] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[ 11.077203] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
[ 11.077206] forcedeth 0000:00:11.0: setting latency timer to 64
[ 11.077250] nv_probe: set workaround bit for reversed mac addr
[ 11.230485] usb 2-6: configuration #1 chosen from 1 choice
[ 11.252095] usbcore: registered new interface driver hiddev
[ 11.258502] input: Weltrend Bar Code Reader as /devices/pci0000:00/0000:00:0a.0/usb2/2-6/2-6:1.0/input/input4
[ 11.284172] generic-usb 0003:040B:6510.0001: input,hidraw0: USB HID v1.10 Keyboard [Weltrend Bar Code Reader] on usb-0000:00:0a.0-6/input0
[ 11.284184] usbcore: registered new interface driver usbhid
[ 11.284186] usbhid: v2.6:USB HID core driver
[ 11.596872] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:91:11:c1
[ 11.596875] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 11.759782] PM: Starting manual resume from disk
[ 11.759784] PM: Resume from partition 8:5
[ 11.759785] PM: Checking hibernation image.
[ 11.760099] PM: Resume from disk failed.
[ 11.787399] EXT4-fs: barriers enabled
[ 11.798360] kjournald2 starting. Commit interval 5 seconds
[ 11.798368] EXT4-fs: delayed allocation enabled
[ 11.798369] EXT4-fs: file extents enabled
[ 11.803749] EXT4-fs: mballoc enabled
[ 11.803753] EXT4-fs: mounted filesystem with ordered data mode.
[ 11.876795] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000eca1c4]
[ 16.361586] udev: starting version 141
[ 17.774693] nvidia: module license 'NVIDIA' taints kernel.
[ 17.815390] parport_pc 00:0a: reported by Plug and Play ACPI
[ 17.815416] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 17.825995] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 17.927389] ACPI: I/O resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05]
[ 17.927391] ACPI: Device needs an ACPI driver
[ 17.927429] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 17.927453] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 17.964929] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 17.999233] ppdev: user-space parallel port driver
[ 18.027044] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 18.027048] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 18.027053] nvidia 0000:01:00.0: setting latency timer to 64
[ 18.027278] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.44 Tue Mar 24 05:46:32 PST 2009
[ 18.040423] cfg80211: Calling CRDA to update world regulatory domain
[ 18.067397] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
[ 18.067406] resource map sanity check conflict: 0xff000000 0xffffffff 0xfff80000 0xfff80fff pnp 00:0e
[ 18.067412] ------------[ cut here ]------------
[ 18.067414] WARNING: at /build/buildd/linux-2.6.28/arch/x86/mm/ioremap.c:226 __ioremap_caller+0x349/0x390()
[ 18.067415] Modules linked in: ck804xrom(+) mtd chipreg snd_seq_midi_event snd_seq ppdev map_funcs snd_timer snd_seq_device i2c_nforce2 snd soundcore snd_page_alloc psmouse serio_raw pcspkr parport_pc parport k8temp cfg80211 nvidia(P) usbhid forcedeth ohci1394 ieee1394 floppy fbcon tileblit font bitblit softcursor
[ 18.067429] Pid: 979, comm: modprobe Tainted: P 2.6.28-12-generic #43-Ubuntu
[ 18.067431] Call Trace:
[ 18.067436] [<ffffffff802509bf>] warn_on_slowpath+0x5f/0x90
[ 18.067439] [<ffffffff8022f669>] ? default_spin_lock_flags+0x9/0x10
[ 18.067440] [<ffffffff8022f669>] ? default_spin_lock_flags+0x9/0x10
[ 18.067443] [<ffffffff80236c29>] __ioremap_caller+0x349/0x390
[ 18.067446] [<ffffffffa09332db>] ? ck804xrom_init_one+0x1ab/0x5ca [ck804xrom]
[ 18.067448] [<ffffffff80236d82>] ioremap_nocache+0x12/0x20
[ 18.067450] [<ffffffffa09332db>] ck804xrom_init_one+0x1ab/0x5ca [ck804xrom]
[ 18.067453] [<ffffffffa0865041>] init_ck804xrom+0x41/0x59 [ck804xrom]
[ 18.067455] [<ffffffffa0865000>] ? init_ck804xrom+0x0/0x59 [ck804xrom]
[ 18.067457] [<ffffffff8020a03b>] do_one_initcall+0x3b/0x170
[ 18.067461] [<ffffffff802424b2>] ? enqueue_entity+0x122/0x2b0
[ 18.067463] [<ffffffff8024870b>] ? enqueue_task_fair+0x7b/0x80
[ 18.067465] [<ffffffff8023e2a9>] ? wakeup_preempt_entity+0x59/0x60
[ 18.067467] [<ffffffff80249330>] ? check_preempt_wakeup+0x210/0x230
[ 18.067469] [<ffffffff8024a3cc>] ? try_to_wake_up+0x12c/0x2e0
[ 18.067473] [<ffffffff8027ef9d>] sys_init_module+0xad/0x1e0
[ 18.067475] [<ffffffff8021253a>] system_call_fastpath+0x16/0x1b
[ 18.067476] ---[ end trace 29619fd5780d3796 ]---
[ 18.193823] cfg80211: World regulatory domain updated:
[ 18.193827] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.193829] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.193831] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.193833] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.193834] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.193835] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.416949] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 18.416953] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 18.417091] HDA Intel 0000:00:0e.1: setting latency timer to 64
[ 18.824643] phy0: Selected rate control algorithm 'pid'
[ 18.888313] phy0: hwaddr 00:15:af:08:cd:5b, RTL8187vB (default) V1 + rtl8225z2
[ 18.888336] usbcore: registered new interface driver rtl8187
[ 19.123764] input: ImExPS/2 Logitech MX Mouse as /devices/platform/i8042/serio1/input/input6
[ 19.266076] lp0: using parport0 (interrupt-driven).
[ 19.283764] it87: Found IT8716F chip at 0x290, revision 1
[ 19.283773] it87: in3 is VCC (+5V)
[ 19.283773] it87: in7 is VCCH (+5V Stand-By)
[ 19.537591] Adding 6040400k swap on /dev/sda5. Priority:-1 extents:1 across:6040400k
[ 20.066988] EXT4 FS on sda6, internal journal on sda6:8
[ 20.830941] EXT4-fs: barriers enabled
[ 20.848533] kjournald2 starting. Commit interval 5 seconds
[ 20.849186] EXT4 FS on sda1, internal journal on sda1:8
[ 20.849187] EXT4-fs: delayed allocation enabled
[ 20.849189] EXT4-fs: file extents enabled
[ 20.859514] EXT4-fs: mballoc enabled
[ 20.859517] EXT4-fs: mounted filesystem with ordered data mode.
[ 21.105539] type=1505 audit(1244196755.306:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2174
[ 21.135640] type=1505 audit(1244196755.334:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2178
[ 21.135738] type=1505 audit(1244196755.334:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2178
[ 21.135769] type=1505 audit(1244196755.334:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2178
[ 21.135797] type=1505 audit(1244196755.334:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2178
[ 21.222811] type=1505 audit(1244196755.422:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2183
[ 21.222951] type=1505 audit(1244196755.422:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2183
[ 21.242798] type=1505 audit(1244196755.442:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2187
[ 30.576116] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.576118] Bluetooth: BNEP filters: protocol multicast
[ 30.630127] Bridge firewalling registered
[ 35.799773] forcedeth 0000:00:11.0: irq 2301 for MSI/MSI-X
[ 35.799985] eth1: no link during initialization.
[ 35.800586] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 35.801672] forcedeth 0000:00:10.0: irq 2300 for MSI/MSI-X
[ 44.844078] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 93.000523] Clocksource tsc unstable (delta = -135262568 ns)
latelierlab@latelierlab-desktop:~$
0.918865 ACPI: expecting a [reference] package element, found type 0
avevo aperto un altro 3d che ho chiuso http://forum.ubuntu-it.org/viewtopic.ph ... 8#p2110998
dove il problema era stato parzialmente risolto
Suggerimenti????