Pagina 1 di 1

Problemi installazione stampante laserjet 1005

Inviato: mercoledì 24 giugno 2009, 15:04
da kuttysurk
Salve a tutti, ecco che ho installato ubuntu 9.04 ed ecco che accedo subito al forum alla ricerca di un aiuto!!!!!!!!!!!!!!!!!!!!!

ho installato una laserjet 1005 hp non usb ma Lpt. (inserisco tante sigle e numeri, così se si riesce a risolvere il problema e magari qualcuno dovesse avere bisogno, sarà più facile da trovare questo tread sul forum)

comunque,

la stampante viene riconosciuta, ma quando mando la stampa: sorpresa non stampa
mi viene visualizzato questo messaggi

/usl/lib/cups/filter/hpcups failed

Anessuno viene in mente una soluzione

ps. la stampante avrà 5 o 6 anni

grazie

Re: Problemi installazione stampante laserjet 1005

Inviato: mercoledì 24 giugno 2009, 15:14
da phede86
Hai installato i driver hp (hplip) ?

Re: Problemi installazione stampante laserjet 1005

Inviato: giovedì 16 luglio 2009, 13:13
da kuttysurk
Scusate se non ho risposto prima, non per mancanza di rispetto ma per problemi di lavoro (sono stato all'estero).

sul terminale ho scritto :
max@max-desktop:~$ sudo sh hplip-3.9.6.run
Creating directory hplip-3.9.6
Verifying archive integrity... All good.
Uncompressing HPLIP 3.9.6 Self Extracting Archive......................................................
warning: hplip-install should not be run as root.

HP Linux Imaging and Printing System (ver. 3.9.6)
HPLIP Installer ver. 5.1

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Thu-16-Jul-2009_13:03:00.log

/error: You are running the installer as root. It is highly recommended that you run the installer as
error: a regular (non-root) user. Do you still wish to continue?
Continue with installation (y=yes, n=no*, q=quit) ? q
max@max-desktop:~$ sh hplip-3.9.6.run
Creating directory hplip-3.9.6
Verifying archive integrity... All good.
Uncompressing HPLIP 3.9.6 Self Extracting Archivecd: 379: can't cd to hplip-3.9.6
...cd: 379: can't cd to hplip-3.9.6
chown: cambiamento del proprietario di "./.gvfs": Funzione non implementata
chown: impossibile leggere la directory "./hplip-3.9.6": Permesso negato
chown: impossibile leggere la directory "./.sane": Permesso negato
chown: cambiamento del proprietario di "./.config/Trolltech.conf": Funzione non permessa
chgrp: cambiamento del gruppo di "./.gvfs": Funzione non implementata
chgrp: impossibile leggere la directory "./hplip-3.9.6": Permesso negato
chgrp: impossibile leggere la directory "./.sane": Permesso negato
chgrp: cambiamento del gruppo di "./.config/Trolltech.conf": Funzione non permessa

cd: 382: can't cd to hplip-3.9.6

HP Linux Imaging and Printing System (ver. 3.9.6)
HPLIP Installer ver. 5.1

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Thu-16-Jul-2009_13:03:33.log

/
note: Defaults for each question are maked with a '*'. Press to accept the default.


INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) : c

Initializing. Please wait...


INTRODUCTION
------------
This installer will install HPLIP version 3.9.6 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).


DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 9.04.

Is "Ubuntu 9.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y


SELECT HPLIP OPTIONS
--------------------
You can select which HPLIP options to enable. Some options require extra dependencies.

Do you wish to enable 'Network/JetDirect I/O' (y=yes*, n=no, q=quit) ? y
Do you wish to enable 'Graphical User Interfaces (Qt4)' (y=yes*, n=no, q=quit) ? y
Do you wish to enable 'PC Send Fax support' (y=yes*, n=no, q=quit) ? y
Do you wish to enable 'Scanning support' (y=yes*, n=no, q=quit) ? n
Do you wish to enable 'HPLIP documentation (HTML)' (y=yes*, n=no, q=quit) ? y


ENTER ROOT/SUPERUSER PASSWORD
-----------------------------
Please enter the root/superuser password:
Password accepted


INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.

Please read the installation notes. Press to continue or 'q' to quit:


RUNNING PRE-INSTALL COMMANDS
----------------------------
OK


CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.


RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
sudo aptitude update (Pre-depend step 3)
OK


DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
warning: A previous install of HPLIP is installed and/or running.

Would you like to have this installer attempt to uninstall the previously installed HPLIP (y=yes*, n=no, q=quit) ? y
sudo apt-get remove --assume-yes hplip hpijs foomatic-db-hpijs (Removing old HPLIP version)
warning: HPLIP removal failed. The previous install may have been installed using a tarball or this installer.
warning: Continuing to run installer - this installation should overwrite the previous one.


RUNNING POST-PACKAGE COMMANDS
-----------------------------
OK


RE-CHECKING DEPENDENCIES
------------------------
OK


READY TO BUILD AND INSTALL
--------------------------
Ready to perform build and install. Press to continue or 'q' to quit:


PRE-BUILD COMMANDS
------------------
OK


BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --prefix=/usr --enable-qt4 --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --enable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --disable-scan-build --enable-fax-build'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make'
Please wait, this may take several minutes...
Command completed successfully.

Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.


Build complete.


POST-BUILD COMMANDS
-------------------
sudo sh /etc/init.d/dbus reload (Post-build step 1)


CLOSE HP_SYSTRAY
----------------
Sending close message to hp-systray (if it is currently running)...


RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in when you started this installer, you will need to either restart your PC or   
unplug and re-plug in your printer (USB cable only). If you choose to restart, run this command after restarting: hp-setup (Note: If you are using a parallel
connection, you will have to restart your PC. If you are using network/wireless, you can ignore and continue).                                             

Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) :
quindi ho riavviato

Re: Problemi installazione stampante laserjet 1005

Inviato: giovedì 16 luglio 2009, 13:29
da kuttysurk
questo è quello che succede:

la stampante viene riconosciuta, lancio la stampa della pagina di prova e mi appare questo messaggio:

MESSAGGI DI STATO

Ci sono messaggi di stato associati a questa coda.
il messaggio di stato della stampante è: >

grazi per il supporto

Re: Problemi installazione stampante laserjet 1005

Inviato: giovedì 16 luglio 2009, 13:53
da Stealth
Apri il browser del pc a cui la stampante è fisicamente connessa e, nella barra degli indirizzi, scrivi

Codice: Seleziona tutto

http://localhost:631
poi prova a configurarla o, nel caso, resinstallarla con cups
ciao