[Risolto] PC si spegne da solo
- devis77
- Scoppiettante Seguace

- Messaggi: 737
- Iscrizione: martedì 7 luglio 2009, 1:16
- Località: Monselice (pd)
- Contatti:
Re: PC si spegne da solo
Adesso si, se si e spento sotto win e hardware ventola della cpu pulita, lancia anche un memtest per verificare che non sia un blocco di ram guasto che da il problema quando va scritto o letto qualche dato
-
alessandro28
- Prode Principiante
- Messaggi: 224
- Iscrizione: giovedì 24 gennaio 2008, 20:44
Re: PC si spegne da solo
mmm, potrei dirti di fare un controllo sugli attributi smart degli hdd e sulla loro temperatura.
quando si "spegne" fa qualche rumore strano? (ticchetii, beep, ...)
le ventole rimangono accese?
l'hard disk rimane acceso? (ronzio dei dischi che girano)
quando si "spegne" fa qualche rumore strano? (ticchetii, beep, ...)
le ventole rimangono accese?
l'hard disk rimane acceso? (ronzio dei dischi che girano)
- maxbigsi
- Tenace Tecnocrate

- Messaggi: 17039
- Iscrizione: mercoledì 21 maggio 2008, 14:05
- Desktop: Xfce
- Distribuzione: MX Linux 23.2 64bit
- Sesso: Maschile
- Contatti:
Re: PC si spegne da solo
per quando riguarda la pulizia, l'ho fatta un mesetto fà con la bomboletta ad aria compressa, e rifatta oggi,.... l'anno scorso sempre d'estate, si è bruciata la scheda video ed è partito un banco di ram, adesso ho solo un banco da 1 giga,.... quando si spegne non fà nessun rumore strano, però mi viene difficile vedere se le ventole girano, è dentro il mobiletto per pc, anche se ho tolto il pannello per far circolare bene l'aria già da un pò, vista l'esperienza della scorsa estate......
Edit: non saprei come fare il controllo sugli attributi smart degli hdd e sulla loro temperatura
Edit: non saprei come fare il controllo sugli attributi smart degli hdd e sulla loro temperatura
Ultima modifica di maxbigsi il venerdì 10 luglio 2009, 14:23, modificato 1 volta in totale.
W il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
https://www.ergosumracalmuto.org/inform ... /index.php
-
alessandro28
- Prode Principiante
- Messaggi: 224
- Iscrizione: giovedì 24 gennaio 2008, 20:44
Re: PC si spegne da solo
da windows usi un programma tipo SIW (System Information for Windows, gratuito) e tra le tante cose che mostra ci sono pure gli attributi smart.
con linux non so come si fa...
con linux non so come si fa...
- maxbigsi
- Tenace Tecnocrate

- Messaggi: 17039
- Iscrizione: mercoledì 21 maggio 2008, 14:05
- Desktop: Xfce
- Distribuzione: MX Linux 23.2 64bit
- Sesso: Maschile
- Contatti:
Re: PC si spegne da solo
conosco SIW, ora cerco e controllo.....alessandro28 ha scritto: da windows usi un programma tipo SIW (System Information for Windows, gratuito) e tra le tante cose che mostra ci sono pure gli attributi smart.
con linux non so come si fa...
W il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
https://www.ergosumracalmuto.org/inform ... /index.php
- devis77
- Scoppiettante Seguace

- Messaggi: 737
- Iscrizione: martedì 7 luglio 2009, 1:16
- Località: Monselice (pd)
- Contatti:
Re: PC si spegne da solo
Buona idea (b2b)
- maxbigsi
- Tenace Tecnocrate

- Messaggi: 17039
- Iscrizione: mercoledì 21 maggio 2008, 14:05
- Desktop: Xfce
- Distribuzione: MX Linux 23.2 64bit
- Sesso: Maschile
- Contatti:
Re: PC si spegne da solo
ho scaricato il programma, cosa devo fare di preciso?.... 
W il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
https://www.ergosumracalmuto.org/inform ... /index.php
-
alessandro28
- Prode Principiante
- Messaggi: 224
- Iscrizione: giovedì 24 gennaio 2008, 20:44
Re: PC si spegne da solo
come non detto era everest che supporatava i valori SMART...maxbigsi ha scritto: ho scaricato il programma, cosa devo fare di preciso?....![]()
http://download.softpedia.com/dl/65c2e11b3c1c8d00a04028b2ed4c18d6/4a574aad/100016369/software/system/info/everesthome220.zip
non mi ricordo se è ancora gratis..
in compenso ho scoperto come si fa in linux.
Codice: Seleziona tutto
sudo apt-get install smartmontoolsCodice: Seleziona tutto
sudo smartctl -s on /dev/xxxper stampare i valori
Codice: Seleziona tutto
sudo smartctl -a /dev/xxxti stamperà una sfilza di righe e tra le tante troverai queste
Codice: Seleziona tutto
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 108 100 006 Pre-fail Always - 19032571
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 37
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 063 060 030 Pre-fail Always - 2172382
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 80
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 39
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 065 055 045 Old_age Always - 35 (Lifetime Min/Max 27/35)
194 Temperature_Celsius 0x0022 035 045 000 Old_age Always - 35 (0 25 0 0)
195 Hardware_ECC_Recovered 0x001a 087 070 000 Old_age Always - 139631337
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
per sicurezza posta qui il risultato...
- maxbigsi
- Tenace Tecnocrate

- Messaggi: 17039
- Iscrizione: mercoledì 21 maggio 2008, 14:05
- Desktop: Xfce
- Distribuzione: MX Linux 23.2 64bit
- Sesso: Maschile
- Contatti:
Re: PC si spegne da solo
ho messo sda6, che è la partizione con ubuntu, dovrei farlo anche con le altre?.....
Codice: Seleziona tutto
max@max-desktop:~$ sudo smartctl -s on /dev/sda6
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
max@max-desktop:~$ sudo smartctl -a /dev/sda6
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SP0802N
Serial Number: 0637J2FW650355
Firmware Version: TK100-23
User Capacity: 80,060,424,192 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Fri Jul 10 16:58:28 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2160) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 36) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 077 065 000 Pre-fail Always - 4352
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 7001
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0
9 Power_On_Half_Minutes 0x0032 099 099 000 Old_age Always - 8806h+01m
10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3517
194 Temperature_Celsius 0x0022 121 070 000 Old_age Always - 39
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 118939350
196 Reallocated_Event_Count 0x0012 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always - 0
198 Offline_Uncorrectable 0x0031 253 253 010 Pre-fail Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
SMART Error Log Version: 1
ATA Error Count: 27 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 27 occurred at disk power-on lifetime: 7947 hours (331 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 80 06 cc 3b e5 Error: ICRC, ABRT at LBA = 0x053bcc06 = 87804934
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 80 06 cc 3b e5 00 08:12:01.063 WRITE DMA
ef 03 46 01 10 00 a0 00 08:11:59.063 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 08:11:59.063 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 08:11:58.000 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 08:11:56.563 INITIALIZE DEVICE PARAMETERS [OBS-6]
Error 26 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 07 8e c7 ef e1 Error: ICRC, ABRT at LBA = 0x01efc78e = 32491406
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 07 8e c7 ef e1 00 03:37:09.125 WRITE DMA
ef 03 46 01 10 00 a0 00 03:37:04.938 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 03:37:04.938 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 03:37:03.938 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 03:37:02.438 INITIALIZE DEVICE PARAMETERS [OBS-6]
Error 25 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 80 c6 0c 59 e1 Error: ICRC, ABRT at LBA = 0x01590cc6 = 22613190
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 80 c6 0c 59 e1 00 03:36:52.438 WRITE DMA
ef 03 46 01 10 00 a0 00 03:36:42.625 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 03:36:42.625 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 03:36:41.563 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 03:36:40.125 INITIALIZE DEVICE PARAMETERS [OBS-6]
Error 24 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 08 06 78 c5 e4 Error: ICRC, ABRT at LBA = 0x04c57806 = 80050182
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 06 78 c5 e4 00 02:14:17.188 WRITE DMA
Error 23 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 06 86 61 66 e1 Error: ICRC, ABRT at LBA = 0x01666186 = 23486854
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 06 86 61 66 e1 00 02:14:16.938 WRITE DMA
ef 03 46 01 10 00 a0 00 02:14:13.063 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 02:14:13.063 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 02:14:12.063 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 02:14:10.625 INITIALIZE DEVICE PARAMETERS [OBS-6]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
W il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
https://www.ergosumracalmuto.org/inform ... /index.php
- maxbigsi
- Tenace Tecnocrate

- Messaggi: 17039
- Iscrizione: mercoledì 21 maggio 2008, 14:05
- Desktop: Xfce
- Distribuzione: MX Linux 23.2 64bit
- Sesso: Maschile
- Contatti:
Re: PC si spegne da solo
nel dubbio ho rifatto tutto senza specificare "sda6", ma solo sda ....
grazie .... 
Codice: Seleziona tutto
max@max-desktop:~$ sudo smartctl -s on /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
max@max-desktop:~$ sudo smartctl -a /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SP0802N
Serial Number: 0637J2FW650355
Firmware Version: TK100-23
User Capacity: 80,060,424,192 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Fri Jul 10 17:05:14 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2160) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 36) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 077 065 000 Pre-fail Always - 4352
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 7001
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0
9 Power_On_Half_Minutes 0x0032 099 099 000 Old_age Always - 8806h+07m
10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3517
194 Temperature_Celsius 0x0022 115 070 000 Old_age Always - 41
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 118942502
196 Reallocated_Event_Count 0x0012 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always - 0
198 Offline_Uncorrectable 0x0031 253 253 010 Pre-fail Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
SMART Error Log Version: 1
ATA Error Count: 27 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 27 occurred at disk power-on lifetime: 7947 hours (331 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 80 06 cc 3b e5 Error: ICRC, ABRT at LBA = 0x053bcc06 = 87804934
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 80 06 cc 3b e5 00 08:12:01.063 WRITE DMA
ef 03 46 01 10 00 a0 00 08:11:59.063 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 08:11:59.063 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 08:11:58.000 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 08:11:56.563 INITIALIZE DEVICE PARAMETERS [OBS-6]
Error 26 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 07 8e c7 ef e1 Error: ICRC, ABRT at LBA = 0x01efc78e = 32491406
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 07 8e c7 ef e1 00 03:37:09.125 WRITE DMA
ef 03 46 01 10 00 a0 00 03:37:04.938 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 03:37:04.938 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 03:37:03.938 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 03:37:02.438 INITIALIZE DEVICE PARAMETERS [OBS-6]
Error 25 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 80 c6 0c 59 e1 Error: ICRC, ABRT at LBA = 0x01590cc6 = 22613190
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 80 c6 0c 59 e1 00 03:36:52.438 WRITE DMA
ef 03 46 01 10 00 a0 00 03:36:42.625 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 03:36:42.625 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 03:36:41.563 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 03:36:40.125 INITIALIZE DEVICE PARAMETERS [OBS-6]
Error 24 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 08 06 78 c5 e4 Error: ICRC, ABRT at LBA = 0x04c57806 = 80050182
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 06 78 c5 e4 00 02:14:17.188 WRITE DMA
Error 23 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 06 86 61 66 e1 Error: ICRC, ABRT at LBA = 0x01666186 = 23486854
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 06 86 61 66 e1 00 02:14:16.938 WRITE DMA
ef 03 46 01 10 00 a0 00 02:14:13.063 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 02:14:13.063 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 02:14:12.063 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 02:14:10.625 INITIALIZE DEVICE PARAMETERS [OBS-6]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
max@max-desktop:~$
W il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
https://www.ergosumracalmuto.org/inform ... /index.php
-
alessandro28
- Prode Principiante
- Messaggi: 224
- Iscrizione: giovedì 24 gennaio 2008, 20:44
Re: PC si spegne da solo
Codice: Seleziona tutto
[quote="maxbigsi"]
It "wraps" after 49.710 days.
Error 27 occurred at disk power-on lifetime: 7947 hours (331 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 80 06 cc 3b e5 Error: ICRC, ABRT at LBA = 0x053bcc06 = 87804934
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 80 06 cc 3b e5 00 08:12:01.063 WRITE DMA
ef 03 46 01 10 00 a0 00 08:11:59.063 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 08:11:59.063 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 08:11:58.000 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 08:11:56.563 INITIALIZE DEVICE PARAMETERS [OBS-6]
Error 26 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 07 8e c7 ef e1 Error: ICRC, ABRT at LBA = 0x01efc78e = 32491406
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 07 8e c7 ef e1 00 03:37:09.125 WRITE DMA
ef 03 46 01 10 00 a0 00 03:37:04.938 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 03:37:04.938 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 03:37:03.938 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 03:37:02.438 INITIALIZE DEVICE PARAMETERS [OBS-6]
Error 25 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 80 c6 0c 59 e1 Error: ICRC, ABRT at LBA = 0x01590cc6 = 22613190
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 80 c6 0c 59 e1 00 03:36:52.438 WRITE DMA
ef 03 46 01 10 00 a0 00 03:36:42.625 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 03:36:42.625 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 03:36:41.563 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 03:36:40.125 INITIALIZE DEVICE PARAMETERS [OBS-6]
Error 24 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 08 06 78 c5 e4 Error: ICRC, ABRT at LBA = 0x04c57806 = 80050182
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 06 78 c5 e4 00 02:14:17.188 WRITE DMA
Error 23 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 06 86 61 66 e1 Error: ICRC, ABRT at LBA = 0x01666186 = 23486854
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 03 06 86 61 66 e1 00 02:14:16.938 WRITE DMA
ef 03 46 01 10 00 a0 00 02:14:13.063 SET FEATURES [Set transfer mode]
ef 03 0c 01 10 00 a0 00 02:14:13.063 SET FEATURES [Set transfer mode]
c6 00 10 01 00 00 a0 00 02:14:12.063 SET MULTIPLE MODE
91 00 3f 01 00 00 af 00 02:14:10.625 INITIALIZE DEVICE PARAMETERS [OBS-6]
così ad occhio ti dico che l'hard disk ha qualche problema.
e la frase "It "wraps" after 49.710 days" credo sia la stima di quanto gli rimane prima di rompersi del tutto...
-
uggi
Re: PC si spegne da solo
scusate, ma 49.710:365=136,19 anni...... (se non ho capito male) :P
-
alessandro28
- Prode Principiante
- Messaggi: 224
- Iscrizione: giovedì 24 gennaio 2008, 20:44
Re: PC si spegne da solo
a me sembrava un punto per i decimali...UGGI ha scritto: scusate, ma 49.710:365=136,19 anni...... (se non ho capito male) :P
gli ultimi 5 errori sono dello stesso tipo, le ore indicate a fiano sono le ore che il pc è rimasto acceso le ultime volte prima di spegersi di botto? 8h12' l'ultima, 3h37' la penultima, 3h36', 2h14'
- maxbigsi
- Tenace Tecnocrate

- Messaggi: 17039
- Iscrizione: mercoledì 21 maggio 2008, 14:05
- Desktop: Xfce
- Distribuzione: MX Linux 23.2 64bit
- Sesso: Maschile
- Contatti:
Re: PC si spegne da solo
quindi dici che stà per abbandonarmi l'HD?..... se non ho capito, male tra 49 giorni.... ma il fatto che si spenga dipende dal surriscaldamento dell'HD?....... c'è anche un sensore che fà in modo che il pc si spenga quando l'HD è surriscaldato?...... comunque finora non ho sentito rumori strani che facciano presagire una rottura dell'HD, il pc ha sei anni, la marca è samsung......
W il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
https://www.ergosumracalmuto.org/inform ... /index.php
- maxbigsi
- Tenace Tecnocrate

- Messaggi: 17039
- Iscrizione: mercoledì 21 maggio 2008, 14:05
- Desktop: Xfce
- Distribuzione: MX Linux 23.2 64bit
- Sesso: Maschile
- Contatti:
Re: PC si spegne da solo
ho fatto uno scandisk approfondito, e non ha trovato errori, c'è da dire però che qualche giorno fà ho spostato ubuntu da wubi a partizione reale, ho fatto una deframmentazione prima dell'operazione, e quando ho completato, all'avvio xp ha fatto un controllo di coerenza dell'HD, trovando alcuni errori, poi dalla partizione che ho creato per ospitare ubuntu, c'erano quasi 850 mb occupati, con dentro una cartella denominata lost+found, avevo quasi messo in conto di piallare tutto e reinstallare, ma poi ho visto che xp e ubuntu partivano regolarmente, e non ho agito...... non sò se ci sia una correlazione tra questo.....
W il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
https://www.ergosumracalmuto.org/inform ... /index.php
-
alessandro28
- Prode Principiante
- Messaggi: 224
- Iscrizione: giovedì 24 gennaio 2008, 20:44
Re: PC si spegne da solo
non penso ci sia un sensore particolare, quando l'hdd è troppo caldo stacca, non so se per un parametro di protezione suo o se non ce la fa proprio a funzionare. però senza le temperature del'hdd sono solo supposizioni.maxbigsi ha scritto: quindi dici che stà per abbandonarmi l'HD?..... se non ho capito, male tra 49 giorni.... ma il fatto che si spenga dipende dal surriscaldamento dell'HD?....... c'è anche un sensore che fà in modo che il pc si spenga quando l'HD è surriscaldato?...... comunque finora non ho sentito rumori strani che facciano presagire una rottura dell'HD, il pc ha sei anni, la marca è samsung......
il controllo di coerenza che fa windows controlla solo i file contenuti, non l'hdd intero. per controllare lo stato di salute dell'hard disk in modo approfondito devi usare delle apposite utility. le trovi raccolte (insieme a molte altre utilissime) nel cd ultimate boot cd http://pharry.org/data/ubcd411.iso (115MB)maxbigsi ha scritto: ho fatto uno scandisk approfondito, e non ha trovato errori, c'è da dire però che qualche giorno fà ho spostato ubuntu da wubi a partizione reale, ho fatto una deframmentazione prima dell'operazione, e quando ho completato, all'avvio xp ha fatto un controllo di coerenza dell'HD, trovando alcuni errori, poi dalla partizione che ho creato per ospitare ubuntu, c'erano quasi 850 mb occupati, con dentro una cartella denominata lost+found, avevo quasi messo in conto di piallare tutto e reinstallare, ma poi ho visto che xp e ubuntu partivano regolarmente, e non ho agito...... non sò se ci sia una correlazione tra questo.....
è un cd che si avvia prima del sistema operativo e con i tool, forniti dai produttori degli hdd, contenuti nel cd puoi fare dei test molto accurati per vedere se l'hard disk è in buono stato o meno
- maxbigsi
- Tenace Tecnocrate

- Messaggi: 17039
- Iscrizione: mercoledì 21 maggio 2008, 14:05
- Desktop: Xfce
- Distribuzione: MX Linux 23.2 64bit
- Sesso: Maschile
- Contatti:
Re: PC si spegne da solo
....grazie per le dritte ... (good) il cd che mi proponi è interessante, solo che io mi collego col cellulare, e 115 mb non rientrano nel limite massimo.....
comunque da qualche parte devo avere una utility scaricata dal sito samsung per testare il modello del mio HD...... comunque ho deciso di portarlo in assistenza la prossima settimana, così lo faccio controllare...... (b2b)
W il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
https://www.ergosumracalmuto.org/inform ... /index.php
-
alessandro28
- Prode Principiante
- Messaggi: 224
- Iscrizione: giovedì 24 gennaio 2008, 20:44
Re: PC si spegne da solo
non per abbattere le tue speranze, ma non è detto che sia solo quello che causa il problema...
hai provato a fare un controllo della memoria RAM tramite memtest che trovi nel menù di grub?
hai provato a fare un controllo della memoria RAM tramite memtest che trovi nel menù di grub?
- maxbigsi
- Tenace Tecnocrate

- Messaggi: 17039
- Iscrizione: mercoledì 21 maggio 2008, 14:05
- Desktop: Xfce
- Distribuzione: MX Linux 23.2 64bit
- Sesso: Maschile
- Contatti:
Re: PC si spegne da solo
si,... ho fatto il controllo con memtest, anche se ho dovuto usare la live, e non ha riscontrato errori, del resto il banco di ram da un giga l'ho cambiato l'anno scorso in questo periodo.... prima avevo due banchi da 256, mi si è bruciato uno e ho comprato uno da un giga.....alessandro28 ha scritto: non per abbattere le tue speranze, ma non è detto che sia solo quello che causa il problema...
hai provato a fare un controllo della memoria RAM tramite memtest che trovi nel menù di grub?
p.s. ho usato la live perchè quando parte grub con l'opzione per memtest mi dava errore 11 unrecognized ecc. ecc. .... :-\
W il software libero..... W Ubuntu -- Ubuntu User # 31322
https://www.ergosumracalmuto.org/inform ... /index.php
https://www.ergosumracalmuto.org/inform ... /index.php
- Matt_91
- Scoppiettante Seguace

- Messaggi: 688
- Iscrizione: mercoledì 25 giugno 2008, 14:57
- Desktop: ubuntu
- Distribuzione: Ubuntu 13.10 x86_64
- Località: Trentino
- Contatti:
Re: PC si spegne da solo
Allora, avevo il tuo stesso identico problema, in più io, se andavo sul sito della Tim(e solo su quello) e mi loggavo, dopo 5-10 minuti (il tempo variava di volta in volta), ubuntu faceva il logout(Termina sessione) e dovevo accedere nuovamente ad ubuntu.
Poi ogni tanto, quando gli girava si spegneva tutto, come se saltasse la corrente.
Il problema e software, io ho formattato e reinstallato per disperazione, ora su Ubuntu 9.10 64Bit, io problema non c'è lo più(almeno che non arrivi un altro aggiornamento come quello dell'altra volta)
Guarda, ti capisco la cosa è molto snervante. >:(
Auguri, spero che almeno tu riesca a risolvere.
P.S.:Se hai un cell. tim, prova a loggarti sul sito e vedi se Ubuntu ti termina la sessione, perchè se te lo fa anche a te, il tuo problema è proprio identico al mio.
Ciao
Poi ogni tanto, quando gli girava si spegneva tutto, come se saltasse la corrente.
Il problema e software, io ho formattato e reinstallato per disperazione, ora su Ubuntu 9.10 64Bit, io problema non c'è lo più(almeno che non arrivi un altro aggiornamento come quello dell'altra volta)
Guarda, ti capisco la cosa è molto snervante. >:(
Auguri, spero che almeno tu riesca a risolvere.
P.S.:Se hai un cell. tim, prova a loggarti sul sito e vedi se Ubuntu ti termina la sessione, perchè se te lo fa anche a te, il tuo problema è proprio identico al mio.
Ciao
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 8 ospiti