Pagina 3 di 4

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 14:07
da devis77
Adesso si, se si e spento sotto win e hardware ventola della cpu pulita, lancia anche un memtest per verificare che non sia un blocco di ram guasto che da il problema quando va scritto o letto qualche dato

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 14:09
da alessandro28
mmm, potrei dirti di fare un controllo sugli attributi smart degli hdd e sulla loro temperatura.
quando si "spegne" fa qualche rumore strano? (ticchetii, beep, ...)
le ventole rimangono accese?
l'hard disk rimane acceso? (ronzio dei dischi che girano)

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 14:21
da maxbigsi
per quando riguarda la pulizia, l'ho fatta un mesetto fà con la bomboletta ad aria compressa, e rifatta oggi,.... l'anno scorso sempre d'estate, si è bruciata la scheda video ed è partito un banco di ram, adesso ho solo un banco da 1 giga,.... quando si spegne non fà nessun rumore strano, però mi viene difficile vedere se le ventole girano, è dentro il mobiletto per pc, anche se ho tolto il pannello per far circolare bene l'aria già da un pò, vista l'esperienza della scorsa estate......


Edit: non saprei come fare il controllo sugli attributi smart degli hdd e sulla loro temperatura

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 14:27
da alessandro28
da windows usi un programma tipo SIW (System Information for Windows, gratuito) e tra le tante cose che mostra ci sono pure gli attributi smart.
con linux non so come si fa...

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 14:49
da maxbigsi
alessandro28 ha scritto: da windows usi un programma tipo SIW (System Information for Windows, gratuito) e tra le tante cose che mostra ci sono pure gli attributi smart.
con linux non so come si fa...
conosco SIW, ora cerco e controllo.....

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 14:51
da devis77
Buona idea  (b2b)

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 14:58
da maxbigsi
ho scaricato il programma, cosa devo fare di preciso?....  :(

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 16:11
da alessandro28
maxbigsi ha scritto: ho scaricato il programma, cosa devo fare di preciso?....  :(
come non detto era everest che supporatava i valori SMART...
http://download.softpedia.com/dl/65c2e11b3c1c8d00a04028b2ed4c18d6/4a574aad/100016369/software/system/info/everesthome220.zip
non mi ricordo se è ancora gratis..

in compenso ho scoperto come si fa in linux.

Codice: Seleziona tutto

sudo apt-get install smartmontools
per abilitare il controllo degli smart dai il comando

Codice: Seleziona tutto

sudo smartctl -s on /dev/xxx
dove xxx è il nome del tuo hdd, esempio sda

per stampare i valori

Codice: Seleziona tutto

sudo smartctl -a /dev/xxx
dove xxx è il nome del tuo hdd, esempio sda

ti stamperà una sfilza di righe e tra le tante troverai queste

Codice: Seleziona tutto

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   108   100   006    Pre-fail  Always       -       19032571
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       37
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   063   060   030    Pre-fail  Always       -       2172382
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       80
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       39
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   065   055   045    Old_age   Always       -       35 (Lifetime Min/Max 27/35)
194 Temperature_Celsius     0x0022   035   045   000    Old_age   Always       -       35 (0 25 0 0)
195 Hardware_ECC_Recovered  0x001a   087   070   000    Old_age   Always       -       139631337
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0
i valori della colonna VALUE e WORST devono essere maggiori della colonna TRESH
per sicurezza posta qui il risultato...

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 17:02
da maxbigsi
ho messo sda6, che è la partizione con ubuntu, dovrei farlo anche con le altre?.....

Codice: Seleziona tutto

max@max-desktop:~$ sudo smartctl -s on /dev/sda6
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

max@max-desktop:~$ sudo smartctl -a /dev/sda6
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG SP0802N
Serial Number:    0637J2FW650355
Firmware Version: TK100-23
User Capacity:    80,060,424,192 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Fri Jul 10 16:58:28 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (2160) seconds.
Offline data collection
capabilities: 			 (0x1b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  36) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   077   065   000    Pre-fail  Always       -       4352
  4 Start_Stop_Count        0x0032   094   094   000    Old_age   Always       -       7001
  5 Reallocated_Sector_Ct   0x0033   253   253   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   253   253   051    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0024   253   253   000    Old_age   Offline      -       0
  9 Power_On_Half_Minutes   0x0032   099   099   000    Old_age   Always       -       8806h+01m
 10 Spin_Retry_Count        0x0013   253   253   049    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       3517
194 Temperature_Celsius     0x0022   121   070   000    Old_age   Always       -       39
195 Hardware_ECC_Recovered  0x000a   100   100   000    Old_age   Always       -       118939350
196 Reallocated_Event_Count 0x0012   253   253   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0033   253   253   010    Pre-fail  Always       -       0
198 Offline_Uncorrectable   0x0031   253   253   010    Pre-fail  Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   100   100   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000b   100   100   051    Pre-fail  Always       -       0
201 Soft_Read_Error_Rate    0x000b   100   100   051    Pre-fail  Always       -       0

SMART Error Log Version: 1
ATA Error Count: 27 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 27 occurred at disk power-on lifetime: 7947 hours (331 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 80 06 cc 3b e5  Error: ICRC, ABRT at LBA = 0x053bcc06 = 87804934

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 80 06 cc 3b e5 00      08:12:01.063  WRITE DMA
  ef 03 46 01 10 00 a0 00      08:11:59.063  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      08:11:59.063  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      08:11:58.000  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      08:11:56.563  INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 26 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 07 8e c7 ef e1  Error: ICRC, ABRT at LBA = 0x01efc78e = 32491406

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 07 8e c7 ef e1 00      03:37:09.125  WRITE DMA
  ef 03 46 01 10 00 a0 00      03:37:04.938  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      03:37:04.938  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      03:37:03.938  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      03:37:02.438  INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 25 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 80 c6 0c 59 e1  Error: ICRC, ABRT at LBA = 0x01590cc6 = 22613190

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 80 c6 0c 59 e1 00      03:36:52.438  WRITE DMA
  ef 03 46 01 10 00 a0 00      03:36:42.625  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      03:36:42.625  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      03:36:41.563  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      03:36:40.125  INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 24 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 08 06 78 c5 e4  Error: ICRC, ABRT at LBA = 0x04c57806 = 80050182

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 08 06 78 c5 e4 00      02:14:17.188  WRITE DMA

Error 23 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 06 86 61 66 e1  Error: ICRC, ABRT at LBA = 0x01666186 = 23486854

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 06 86 61 66 e1 00      02:14:16.938  WRITE DMA
  ef 03 46 01 10 00 a0 00      02:14:13.063  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      02:14:13.063  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      02:14:12.063  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      02:14:10.625  INITIALIZE DEVICE PARAMETERS [OBS-6]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 17:07
da maxbigsi
nel dubbio ho rifatto tutto senza specificare "sda6", ma solo sda ....

Codice: Seleziona tutto

max@max-desktop:~$ sudo smartctl -s on /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

max@max-desktop:~$ sudo smartctl -a /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG SP0802N
Serial Number:    0637J2FW650355
Firmware Version: TK100-23
User Capacity:    80,060,424,192 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Fri Jul 10 17:05:14 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (2160) seconds.
Offline data collection
capabilities: 			 (0x1b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  36) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   077   065   000    Pre-fail  Always       -       4352
  4 Start_Stop_Count        0x0032   094   094   000    Old_age   Always       -       7001
  5 Reallocated_Sector_Ct   0x0033   253   253   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   253   253   051    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0024   253   253   000    Old_age   Offline      -       0
  9 Power_On_Half_Minutes   0x0032   099   099   000    Old_age   Always       -       8806h+07m
 10 Spin_Retry_Count        0x0013   253   253   049    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       3517
194 Temperature_Celsius     0x0022   115   070   000    Old_age   Always       -       41
195 Hardware_ECC_Recovered  0x000a   100   100   000    Old_age   Always       -       118942502
196 Reallocated_Event_Count 0x0012   253   253   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0033   253   253   010    Pre-fail  Always       -       0
198 Offline_Uncorrectable   0x0031   253   253   010    Pre-fail  Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   100   100   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000b   100   100   051    Pre-fail  Always       -       0
201 Soft_Read_Error_Rate    0x000b   100   100   051    Pre-fail  Always       -       0

SMART Error Log Version: 1
ATA Error Count: 27 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 27 occurred at disk power-on lifetime: 7947 hours (331 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 80 06 cc 3b e5  Error: ICRC, ABRT at LBA = 0x053bcc06 = 87804934

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 80 06 cc 3b e5 00      08:12:01.063  WRITE DMA
  ef 03 46 01 10 00 a0 00      08:11:59.063  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      08:11:59.063  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      08:11:58.000  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      08:11:56.563  INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 26 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 07 8e c7 ef e1  Error: ICRC, ABRT at LBA = 0x01efc78e = 32491406

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 07 8e c7 ef e1 00      03:37:09.125  WRITE DMA
  ef 03 46 01 10 00 a0 00      03:37:04.938  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      03:37:04.938  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      03:37:03.938  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      03:37:02.438  INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 25 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 80 c6 0c 59 e1  Error: ICRC, ABRT at LBA = 0x01590cc6 = 22613190

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 80 c6 0c 59 e1 00      03:36:52.438  WRITE DMA
  ef 03 46 01 10 00 a0 00      03:36:42.625  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      03:36:42.625  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      03:36:41.563  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      03:36:40.125  INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 24 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 08 06 78 c5 e4  Error: ICRC, ABRT at LBA = 0x04c57806 = 80050182

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 08 06 78 c5 e4 00      02:14:17.188  WRITE DMA

Error 23 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 06 86 61 66 e1  Error: ICRC, ABRT at LBA = 0x01666186 = 23486854

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 06 86 61 66 e1 00      02:14:16.938  WRITE DMA
  ef 03 46 01 10 00 a0 00      02:14:13.063  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      02:14:13.063  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      02:14:12.063  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      02:14:10.625  INITIALIZE DEVICE PARAMETERS [OBS-6]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging
max@max-desktop:~$ 

grazie ....  :(

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 19:14
da alessandro28

Codice: Seleziona tutto

[quote="maxbigsi"]
It "wraps" after 49.710 days.

Error 27 occurred at disk power-on lifetime: 7947 hours (331 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 80 06 cc 3b e5  Error: ICRC, ABRT at LBA = 0x053bcc06 = 87804934

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 80 06 cc 3b e5 00      08:12:01.063  WRITE DMA
  ef 03 46 01 10 00 a0 00      08:11:59.063  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      08:11:59.063  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      08:11:58.000  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      08:11:56.563  INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 26 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 07 8e c7 ef e1  Error: ICRC, ABRT at LBA = 0x01efc78e = 32491406

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 07 8e c7 ef e1 00      03:37:09.125  WRITE DMA
  ef 03 46 01 10 00 a0 00      03:37:04.938  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      03:37:04.938  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      03:37:03.938  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      03:37:02.438  INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 25 occurred at disk power-on lifetime: 7353 hours (306 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 80 c6 0c 59 e1  Error: ICRC, ABRT at LBA = 0x01590cc6 = 22613190

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 80 c6 0c 59 e1 00      03:36:52.438  WRITE DMA
  ef 03 46 01 10 00 a0 00      03:36:42.625  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      03:36:42.625  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      03:36:41.563  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      03:36:40.125  INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 24 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 08 06 78 c5 e4  Error: ICRC, ABRT at LBA = 0x04c57806 = 80050182

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 08 06 78 c5 e4 00      02:14:17.188  WRITE DMA

Error 23 occurred at disk power-on lifetime: 6757 hours (281 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 06 86 61 66 e1  Error: ICRC, ABRT at LBA = 0x01666186 = 23486854

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 03 06 86 61 66 e1 00      02:14:16.938  WRITE DMA
  ef 03 46 01 10 00 a0 00      02:14:13.063  SET FEATURES [Set transfer mode]
  ef 03 0c 01 10 00 a0 00      02:14:13.063  SET FEATURES [Set transfer mode]
  c6 00 10 01 00 00 a0 00      02:14:12.063  SET MULTIPLE MODE
  91 00 3f 01 00 00 af 00      02:14:10.625  INITIALIZE DEVICE PARAMETERS [OBS-6]
[/quote]

così ad occhio ti dico che l'hard disk ha qualche problema.
e la frase "It "wraps" after 49.710 days" credo sia la stima di quanto gli rimane prima di rompersi del tutto...

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 19:43
da uggi
scusate, ma 49.710:365=136,19 anni...... (se non ho capito male)  :P

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 20:21
da alessandro28
UGGI ha scritto: scusate, ma 49.710:365=136,19 anni...... (se non ho capito male)  :P
a me sembrava un punto per i decimali...
gli ultimi 5 errori sono dello stesso tipo, le ore indicate a fiano sono le ore che il pc è rimasto acceso le ultime volte prima di spegersi di botto? 8h12' l'ultima, 3h37' la penultima, 3h36', 2h14'

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 22:42
da maxbigsi
quindi dici che stà per abbandonarmi l'HD?..... se non ho capito, male tra 49 giorni.... ma il fatto che si spenga dipende dal surriscaldamento dell'HD?....... c'è anche un sensore che fà in modo che il pc si spenga quando l'HD è surriscaldato?...... comunque finora non ho sentito rumori strani che facciano presagire una rottura dell'HD, il pc ha sei anni, la marca è samsung......

Re: PC si spegne da solo

Inviato: venerdì 10 luglio 2009, 23:47
da maxbigsi
ho fatto uno scandisk approfondito, e non ha trovato errori, c'è da dire però che qualche giorno fà ho spostato ubuntu da wubi a partizione reale, ho fatto una deframmentazione prima dell'operazione, e quando ho completato, all'avvio xp ha fatto un controllo di coerenza dell'HD, trovando alcuni errori, poi dalla partizione che ho creato per ospitare ubuntu, c'erano quasi 850 mb occupati, con dentro una cartella denominata lost+found, avevo quasi messo in conto di piallare tutto e reinstallare, ma poi ho visto che xp e ubuntu partivano regolarmente, e non ho agito...... non sò se ci sia una correlazione tra questo.....

Re: PC si spegne da solo

Inviato: sabato 11 luglio 2009, 9:25
da alessandro28
maxbigsi ha scritto: quindi dici che stà per abbandonarmi l'HD?..... se non ho capito, male tra 49 giorni.... ma il fatto che si spenga dipende dal surriscaldamento dell'HD?....... c'è anche un sensore che fà in modo che il pc si spenga quando l'HD è surriscaldato?...... comunque finora non ho sentito rumori strani che facciano presagire una rottura dell'HD, il pc ha sei anni, la marca è samsung......
non penso ci sia un sensore particolare, quando l'hdd è troppo caldo stacca, non so se per un parametro di protezione suo o se non ce la fa proprio a funzionare. però senza le temperature del'hdd sono solo supposizioni.
maxbigsi ha scritto: ho fatto uno scandisk approfondito, e non ha trovato errori, c'è da dire però che qualche giorno fà ho spostato ubuntu da wubi a partizione reale, ho fatto una deframmentazione prima dell'operazione, e quando ho completato, all'avvio xp ha fatto un controllo di coerenza dell'HD, trovando alcuni errori, poi dalla partizione che ho creato per ospitare ubuntu, c'erano quasi 850 mb occupati, con dentro una cartella denominata lost+found, avevo quasi messo in conto di piallare tutto e reinstallare, ma poi ho visto che xp e ubuntu partivano regolarmente, e non ho agito...... non sò se ci sia una correlazione tra questo.....
il controllo di coerenza che fa windows controlla solo i file contenuti, non l'hdd intero. per controllare lo stato di salute dell'hard disk in modo approfondito devi usare delle apposite utility. le trovi raccolte (insieme a molte altre utilissime) nel cd ultimate boot cd http://pharry.org/data/ubcd411.iso (115MB)
è un cd che si avvia prima del sistema operativo e con i tool, forniti dai produttori degli hdd, contenuti nel cd puoi fare dei test molto accurati per vedere se l'hard disk è in buono stato o meno

Re: PC si spegne da solo

Inviato: sabato 11 luglio 2009, 10:11
da maxbigsi
....grazie per le dritte  ...  (good) il cd che mi proponi è interessante, solo che io mi collego col cellulare, e 115 mb non rientrano nel limite massimo.....  ;D comunque da qualche parte devo avere una utility scaricata dal sito samsung per testare il modello del mio HD...... comunque ho deciso di portarlo in assistenza la prossima settimana, così lo faccio controllare......  (b2b)

Re: PC si spegne da solo

Inviato: sabato 11 luglio 2009, 11:07
da alessandro28
non per abbattere le tue speranze, ma non è detto che sia solo quello che causa il problema...
hai provato a fare un controllo della memoria RAM tramite memtest che trovi nel menù di grub?

Re: PC si spegne da solo

Inviato: sabato 11 luglio 2009, 14:25
da maxbigsi
alessandro28 ha scritto: non per abbattere le tue speranze, ma non è detto che sia solo quello che causa il problema...
hai provato a fare un controllo della memoria RAM tramite memtest che trovi nel menù di grub?
si,... ho fatto il controllo con memtest, anche se ho dovuto usare la live, e non ha riscontrato errori, del resto il banco di ram da un giga l'ho cambiato l'anno scorso in questo periodo.... prima avevo due banchi da 256, mi si è bruciato uno e ho comprato uno da un giga.....


p.s. ho usato la live perchè quando parte grub con l'opzione per memtest mi dava errore 11 unrecognized ecc. ecc. ....  :-\

Re: PC si spegne da solo

Inviato: sabato 11 luglio 2009, 15:26
da Matt_91
Allora, avevo il tuo stesso identico problema, in più io, se andavo sul sito della Tim(e solo su quello) e mi loggavo, dopo 5-10 minuti (il tempo variava di volta in volta), ubuntu faceva il logout(Termina sessione) e dovevo accedere nuovamente ad ubuntu.
Poi ogni tanto, quando gli girava si spegneva tutto, come se saltasse la corrente.

Il problema e software, io ho formattato e reinstallato per disperazione, ora su Ubuntu 9.10 64Bit, io problema non c'è lo più(almeno che non arrivi un altro aggiornamento come quello dell'altra volta)

Guarda, ti capisco la cosa è molto snervante. >:(

Auguri, spero che almeno tu riesca a risolvere.


P.S.:Se hai un cell. tim, prova a loggarti sul sito e vedi se Ubuntu ti termina la sessione, perchè se te lo fa anche a te, il tuo problema è proprio identico al mio.

Ciao