configurare philips voip 321 x ubuntu

Riconoscimento, installazione e configurazione delle periferiche.
luissito
Prode Principiante
Messaggi: 86
Iscrizione: giovedì 16 aprile 2009, 14:59

configurare philips voip 321 x ubuntu

Messaggio da luissito »

un favore debo configurare un telefono dual voip 321philips  per skype su ubuntu 9,04,che prima lo avevo su windows,e che ora utilizo ubuntu 9,04,cosa se devi fare??grazie
Avatar utente
Janvitus
Amministratore
Amministratore
Messaggi: 18787
Iscrizione: lunedì 25 aprile 2005, 15:52
Desktop: GNOME Shell / Xfce
Sesso: Maschile
Località: Potenza
Contatti:

Re: configurare philips voip 321 x ubuntu

Messaggio da Janvitus »

Attacca il telefono alla usb e poi lancia dmesg dal terminale, vedi se te lo riconosce.
+Fedora 40 • +Xubuntu 24.04
luissito
Prode Principiante
Messaggi: 86
Iscrizione: giovedì 16 aprile 2009, 14:59

Re: configurare philips voip 321 x ubuntu

Messaggio da luissito »

ciao, guarda un po viene questo

Codice: Seleziona tutto

[    1.624265] NetLabel:  domain hash size = 128
[    1.624267] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.624300] NetLabel:  unlabeled traffic allowed by default
[    1.624466] AppArmor: AppArmor Filesystem Enabled
[    1.624518] pnp: PnP ACPI init
[    1.624518] ACPI: bus type pnp registered
[    1.631495] pnp: PnP ACPI: found 11 devices
[    1.631502] ACPI: ACPI bus type pnp unregistered
[    1.631510] PnPBIOS: Disabled by ACPI PNP
[    1.631543] system 00:01: ioport range 0x1c0-0x1cf has been reserved
[    1.631547] system 00:01: ioport range 0x480-0x48f has been reserved
[    1.631550] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    1.631554] system 00:01: ioport range 0x862-0x866 has been reserved
[    1.631557] system 00:01: ioport range 0x700-0x70f has been reserved
[    1.631560] system 00:01: ioport range 0xc00-0xc1f has been reserved
[    1.631563] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[    1.631571] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
[    1.666632] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    1.666638] pci 0000:00:01.0:   IO window: 0xa000-0xafff
[    1.666646] pci 0000:00:01.0:   MEM window: 0xd7e00000-0xd7efffff
[    1.666652] pci 0000:00:01.0:   PREFETCH window: 0x000000c7c00000-0x000000d7cfffff
[    1.666662] pci 0000:00:08.0: CardBus bridge, secondary bus 0000:02
[    1.666664] pci 0000:00:08.0:   IO window: 0x001000-0x0010ff
[    1.666670] pci 0000:00:08.0:   IO window: 0x001400-0x0014ff
[    1.666676] pci 0000:00:08.0:   PREFETCH window: 0x40000000-0x43ffffff
[    1.666682] pci 0000:00:08.0:   MEM window: 0x44000000-0x47ffffff
[    1.667008] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    1.667014] PCI: setting IRQ 11 as level-triggered
[    1.667020] pci 0000:00:08.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    1.667030] pci 0000:00:08.0: setting latency timer to 64
[    1.667037] bus: 00 index 0 io port: [0x00-0xffff]
[    1.667039] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    1.667043] bus: 01 index 0 io port: [0xa000-0xafff]
[    1.667046] bus: 01 index 1 mmio: [0xd7e00000-0xd7efffff]
[    1.667049] bus: 01 index 2 mmio: [0xc7c00000-0xd7cfffff]
[    1.667051] bus: 01 index 3 mmio: [0x0-0x0]
[    1.667056] bus: 02 index 0 io port: [0x1000-0x10ff]
[    1.667058] bus: 02 index 1 io port: [0x1400-0x14ff]
[    1.667061] bus: 02 index 2 mmio: [0x40000000-0x43ffffff]
[    1.667064] bus: 02 index 3 mmio: [0x44000000-0x47ffffff]
[    1.667085] NET: Registered protocol family 2
[    1.667329] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.667942] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.669518] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.670281] TCP: Hash tables configured (established 131072 bind 65536)
[    1.670289] TCP reno registered
[    1.670549] NET: Registered protocol family 1
[    1.670788] checking if image is initramfs...<6>ACPI: EC: non-query interrupt received, switching to interrupt mode
[    2.491288] Switched to high resolution mode on CPU 0
[    2.566226]  it is
[    3.025212] Freeing initrd memory: 7593k freed
[    3.025340] cpufreq: No nForce2 chipset.
[    3.025637] audit: initializing netlink socket (disabled)
[    3.025677] type=2000 audit(1247578390.024:1): initialized
[    3.034315] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    3.036491] VFS: Disk quotas dquot_6.5.1
[    3.036634] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.038092] fuse init (API version 7.10)
[    3.038346] msgmni has been set to 1498
[    3.038849] alg: No test for stdrng (krng)
[    3.038903] io scheduler noop registered
[    3.038906] io scheduler anticipatory registered
[    3.038909] io scheduler deadline registered
[    3.038979] io scheduler cfq registered (default)
[    4.026955] ACPI: EC: missing confirmations, switch off interrupt mode.
[    5.080093] pci 0000:01:00.0: Boot video device
[    5.087628] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    5.087649] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    5.090295] ACPI: AC Adapter [AC0] (on-line)
[    5.102303] ACPI: Battery Slot [BAT0] (battery present)
[    5.102488] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    5.102494] ACPI: Power Button (FF) [PWRF]
[    5.102596] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    5.102602] ACPI: Power Button (CM) [PWRB]
[    5.102704] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/PNP0C0D:00/input/input2
[    5.102801] ACPI: Lid Switch [LID]
[    5.102924] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    5.102934] ACPI: Sleep Button (CM) [SLPB]
[    5.103291] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    5.103353] processor ACPI_CPU:00: registered as cooling_device0
[    5.103361] ACPI: Processor [CPU1] (supports 8 throttling states)
[    5.108434] thermal LNXTHERM:01: registered as thermal_zone0
[    5.108681] ACPI: Thermal Zone [THRM] (75 C)
[    5.108818] isapnp: Scanning for PnP cards...
[    5.462707] isapnp: No Plug & Play device found
[    5.466408] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    5.466523] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
[    5.467431] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    5.467439] PCI: setting IRQ 10 as level-triggered
[    5.467445] serial 0000:00:02.6: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[    5.467459] serial 0000:00:02.6: PCI INT C disabled
[    5.469290] brd: module loaded
[    5.470291] loop: module loaded
[    5.470543] Fixed MDIO Bus: probed
[    5.470555] PPP generic driver version 2.4.2
[    5.470723] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    5.470798] Driver 'sd' needs updating - please use bus_type methods
[    5.470819] Driver 'sr' needs updating - please use bus_type methods
[    5.472254] pata_sis 0000:00:02.5: version 0.5.2
[    5.472614] scsi0 : pata_sis
[    5.472909] scsi1 : pata_sis
[    5.473941] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    5.473947] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    5.636497] ata1.00: ATA-7: Hitachi HTS541680J9AT00, SB2OA70H, max UDMA/100
[    5.636501] ata1.00: 156301488 sectors, multi 16: LBA48 
[    5.636537] ata1.00: limited to UDMA/33 due to 40-wire cable
[    5.652518] ata1.00: configured for UDMA/33
[    5.816341] ata2.00: ATAPI: Optiarc DVD RW AD-7540A, 1.01, max UDMA/33
[    5.832373] ata2.00: configured for UDMA/33
[    5.835279] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
[    5.835617] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[    5.835694] sd 0:0:0:0: [sda] Write Protect is off
[    5.835699] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.835819] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.836107] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[    5.836186] sd 0:0:0:0: [sda] Write Protect is off
[    5.836190] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.836312] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.836323]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    5.922623] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.922769] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.928542] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7540A  1.01 PQ: 0 ANSI: 5
[    5.948336] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.948345] Uniform CD-ROM driver Revision: 3.20
[    5.948582] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.948722] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.949059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.949425] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[    5.949434] ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[    5.949480] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    5.949712] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[    5.949777] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
[    5.949794] ehci_hcd 0000:00:03.3: irq 11, io mem 0xdbffe000
[    5.960069] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    5.960238] usb usb1: configuration #1 chosen from 1 choice
[    5.960301] hub 1-0:1.0: USB hub found
[    5.960326] hub 1-0:1.0: 6 ports detected
[    5.960637] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.961010] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[    5.961019] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
[    5.961061] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    5.961232] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    5.961284] ohci_hcd 0000:00:03.0: irq 10, io mem 0xdbffb000
[    6.018195] usb usb2: configuration #1 chosen from 1 choice
[    6.018259] hub 2-0:1.0: USB hub found
[    6.018288] hub 2-0:1.0: 2 ports detected
[    6.018863] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
[    6.018873] ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10
[    6.018914] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    6.019088] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    6.019123] ohci_hcd 0000:00:03.1: irq 10, io mem 0xdbffc000
[    6.573484] usb usb3: configuration #1 chosen from 1 choice
[    6.573556] hub 3-0:1.0: USB hub found
[    6.573583] hub 3-0:1.0: 2 ports detected
[    6.574151] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
[    6.574158] PCI: setting IRQ 5 as level-triggered
[    6.574165] ohci_hcd 0000:00:03.2: PCI INT C -> Link[LNKG] -> GSI 5 (level, low) -> IRQ 5
[    6.574208] ohci_hcd 0000:00:03.2: OHCI Host Controller
[    6.574391] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[    6.574431] ohci_hcd 0000:00:03.2: irq 5, io mem 0xdbffd000
[    6.630192] usb usb4: configuration #1 chosen from 1 choice
[    6.630255] hub 4-0:1.0: USB hub found
[    6.630285] hub 4-0:1.0: 2 ports detected
[    6.630552] uhci_hcd: USB Universal Host Controller Interface driver
[    6.630733] usbcore: registered new interface driver libusual
[    6.630820] usbcore: registered new interface driver usbserial
[    6.630845] USB Serial support registered for generic
[    6.630878] usbcore: registered new interface driver usbserial_generic
[    6.630883] usbserial: USB Serial Driver core
[    6.630984] PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    6.638733] i8042.c: Detected active multiplexing controller, rev 1.0.
[    6.639769] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.639784] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    6.639788] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    6.639791] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    6.639794] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    6.640351] mice: PS/2 mouse device common for all mice
[    6.641115] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    6.641151] rtc0: alarms up to one month, 114 bytes nvram
[    6.641343] device-mapper: uevent: version 1.0.3
[    6.641702] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    6.641908] device-mapper: multipath: version 1.0.5 loaded
[    6.641916] device-mapper: multipath round-robin: version 1.0.0 loaded
[    6.642205] EISA: Probing bus 0 at eisa.0
[    6.642220] Cannot allocate resource for EISA slot 1
[    6.642251] EISA: Detected 0 cards.
[    6.642448] cpuidle: using governor ladder
[    6.642552] cpuidle: using governor menu
[    6.643332] TCP cubic registered
[    6.643557] NET: Registered protocol family 10
[    6.644345] lo: Disabled Privacy Extensions
[    6.644776] NET: Registered protocol family 17
[    6.644849] Bluetooth: L2CAP ver 2.11
[    6.644854] Bluetooth: L2CAP socket layer initialized
[    6.644859] Bluetooth: SCO (Voice Link) ver 0.6
[    6.644861] Bluetooth: SCO socket layer initialized
[    6.644973] Bluetooth: RFCOMM socket layer initialized
[    6.644994] Bluetooth: RFCOMM TTY layer initialized
[    6.644997] Bluetooth: RFCOMM ver 1.10
[    6.645129] IO APIC resources could be not be allocated.
[    6.645182] Using IPI No-Shortcut mode
[    6.645430] registered taskstats version 1
[    6.645605]   Magic number: 1:465:584
[    6.645744] rtc_cmos 00:03: setting system clock to 2009-07-14 13:33:14 UTC (1247578394)
[    6.645751] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    6.645754] EDD information not available.
[    6.646827] Freeing unused kernel memory: 532k freed
[    6.646992] Write protecting the kernel text: 4128k
[    6.647041] Write protecting the kernel read-only data: 1532k
[    6.651395] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    6.802988] compcache: Compressed swap size set to: 191980 KB
[    6.803901] TLSF: pool: f08f4000, init_size=16384, max_size=0, grow_size=16384
[    7.423386] FDC 0 is a National Semiconductor PC87306
[    7.541338] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[    7.541348] ohci1394 0000:00:02.3: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[    7.593383] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]  MMIO=[dbfff000-dbfff7ff]  Max Packet=[2048]  IR/IT contexts=[4/6]
[    7.812250] sis900.c: v1.08.10 Apr. 2 2006
[    7.812896] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    7.812907] sis900 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    7.814465] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    7.827065] 0000:00:04.0: Using transceiver found at address 1 as default
[    7.839369] eth0: SiS 900 PCI Fast Ethernet at 0xcc00, IRQ 10, 00:03:0d:02:c7:d1
[    8.873253] Adding 191976k swap on /dev/ramzswap0.  Priority:100 extents:1 across:191976k
[    8.952859] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d5325114b99]
[    9.154755] Marking TSC unstable due to TSC halts in idle
[    9.251327] PM: Starting manual resume from disk
[    9.251335] PM: Resume from partition 8:7
[    9.251337] PM: Checking hibernation image.
[    9.251702] PM: Resume from disk failed.
[    9.295152] kjournald starting.  Commit interval 5 seconds
[    9.295186] EXT3-fs: mounted filesystem with ordered data mode.
[   16.247641] udev: starting version 141
[   16.438675] Linux agpgart interface v0.103
[   16.444812] agpgart-sis 0000:00:00.0: SiS chipset [1039/0646]
[   16.449829] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xdc000000
[   16.564842] irda_init()
[   16.564873] NET: Registered protocol family 23
[   16.616903] nsc_ircc_pnp_probe() : From PnP, found firbase 0x3F8 ; irq 4 ; dma 1.
[   16.616971] nsc-ircc, chip->init
[   16.616984] nsc-ircc, Found chip at base=0x02e
[   16.617014] nsc-ircc, driver loaded (Dag Brattli)
[   16.617025] nsc_ircc_open(), can't get iobase of 0x3f8
[   16.617059] nsc-ircc, Found chip at base=0x02e
[   16.617089] nsc-ircc, driver loaded (Dag Brattli)
[   16.617093] nsc_ircc_open(), can't get iobase of 0x3f8
[   16.617434] nsc-ircc 00:0a: disabled
[   16.676945] parport_pc 00:09: reported by Plug and Play ACPI
[   16.677011] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   16.689177] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input6
[   16.722315] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.724415] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   16.767856] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[   16.767865] ACPI: I/O resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SDB1 [0xc12-0xc12]
[   16.767868] ACPI: Device needs an ACPI driver
[   17.120746] yenta_cardbus 0000:00:08.0: CardBus bridge found [1584:3000]
[   17.120778] yenta_cardbus 0000:00:08.0: O2: res at 0x94/0xD4: 00/ea
[   17.120781] yenta_cardbus 0000:00:08.0: O2: enabling read prefetch/write burst
[   17.249292] yenta_cardbus 0000:00:08.0: ISA IRQ mask 0x0008, PCI irq 11
[   17.249303] yenta_cardbus 0000:00:08.0: Socket status: 30000007
[   17.625807] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   17.749591] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   17.984361] Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[   18.342123] ppdev: user-space parallel port driver
[   18.614066] Synaptics Touchpad, model: 1, fw: 4.1, id: 0x848a1, caps: 0x0/0x0
[   18.649899] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[   18.731457] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   18.733643] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   18.734483] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding 0x828-0x877 0x898-0x89f
[   18.734880] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   18.735960] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   18.812071] intel8x0_measure_ac97_clock: measured 55373 usecs
[   18.812076] intel8x0: clocking to 48000
[   18.982988] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   19.153994] lp0: using parport0 (interrupt-driven).
[   19.400217] Adding 1052216k swap on /dev/sda7.  Priority:-1 extents:1 across:1052216k
[   19.529474] psmouse serio4: ID: 10 00 64<6>EXT3 FS on sda5, internal journal
[   20.164378] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio4/input/input9
[   21.212797] kjournald starting.  Commit interval 5 seconds
[   21.213203] EXT3 FS on sda6, internal journal
[   21.213216] EXT3-fs: mounted filesystem with ordered data mode.
[   21.863163] type=1505 audit(1247571209.714:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1964
[   21.953795] type=1505 audit(1247571209.806:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1968
[   21.954226] type=1505 audit(1247571209.806:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1968
[   21.954506] type=1505 audit(1247571209.806:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1968
[   21.954742] type=1505 audit(1247571209.806:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1968
[   22.203429] type=1505 audit(1247571210.054:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1973
[   22.204099] type=1505 audit(1247571210.058:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1973
[   22.262025] type=1505 audit(1247571210.114:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1977
[   25.862513] serial8250: too much work for irq4
[   26.331946] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.331953] Bluetooth: BNEP filters: protocol multicast
[   26.361384] Bridge firewalling registered
[   28.190809] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[   28.373234] [drm] Initialized drm 1.1.0 20060810
[   28.491938] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   28.871558] agpgart-sis 0000:00:00.0: AGP 2.0 bridge
[   28.871590] agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode
[   28.871655] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[   29.097621] [drm] Setting GART location based on new memory map
[   29.097635] [drm] Loading R200 Microcode
[   29.097679] [drm] writeback test succeeded in 1 usecs
[   36.816054] ------------[ cut here ]------------
[   36.816061] WARNING: at /build/buildd/linux-2.6.28/net/sched/sch_generic.c:226 dev_watchdog+0x219/0x230()
[   36.816065] NETDEV WATCHDOG: eth0 (sis900): transmit timed out
[   36.816067] Modules linked in: binfmt_misc radeon drm bridge stp bnep input_polldev lp joydev pcmcia ppdev snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq psmouse pcspkr snd_timer snd_seq_device serio_raw yenta_socket rsrc_nonstatic pcmcia_core snd soundcore snd_page_alloc i2c_sis96x shpchp video output parport_pc parport irda crc_ccitt sis_agp agpgart sis900 mii ohci1394 ieee1394 floppy fbcon tileblit font bitblit softcursor compcache lzo_decompress lzo_compress tlsf
[   36.816134] Pid: 0, comm: swapper Not tainted 2.6.28-11-generic #42-Ubuntu
[   36.816137] Call Trace:
[   36.816149]  [<c0139ab0>] warn_slowpath+0x60/0x80
[   36.816154]  [<c0133b74>] ? try_to_wake_up+0x104/0x290
[   36.816159]  [<c014b9e1>] ? schedule_delayed_work+0x11/0x20
[   36.816163]  [<c0133d0b>] ? default_wake_function+0xb/0x10
[   36.816169]  [<c01568f3>] ? getnstimeofday+0x53/0x110
[   36.816174]  [<c0154955>] ? sched_clock_cpu+0xd5/0x170
[   36.816179]  [<c02cb03d>] ? strlcpy+0x1d/0x60
[   36.816186]  [<c04312f2>] ? netdev_drivername+0x32/0x40
[   36.816191]  [<c0445e49>] dev_watchdog+0x219/0x230
[   36.816196]  [<c015aee3>] ? tick_dev_program_event+0x33/0xc0
[   36.816202]  [<c0143b00>] run_timer_softirq+0x130/0x200
[   36.816205]  [<c0445c30>] ? dev_watchdog+0x0/0x230
[   36.816209]  [<c0445c30>] ? dev_watchdog+0x0/0x230
[   36.816214]  [<c013f197>] __do_softirq+0x97/0x170
[   36.816218]  [<c013f2cd>] do_softirq+0x5d/0x60
[   36.816222]  [<c013f445>] irq_exit+0x55/0x90
[   36.816228]  [<c0106853>] do_IRQ+0x83/0xa0
[   36.816232]  [<c01051f3>] common_interrupt+0x23/0x30
[   36.816238]  [<c03195b9>] ? acpi_idle_enter_simple+0x153/0x18e
[   36.816245]  [<c040f4df>] cpuidle_idle_call+0x6f/0xd0
[   36.816249]  [<c010285d>] cpu_idle+0x6d/0xd0
[   36.816256]  [<c04f110e>] rest_init+0x4e/0x60
[   36.816260] ---[ end trace 73ab6637730e895c ]---
[   36.816266] eth0: Transmit timeout, status 00000004 00000000 
[   42.804054] eth0: no IPv6 routers present
[   44.816057] eth0: Transmit timeout, status 00000004 00000000 
[   52.816057] eth0: Transmit timeout, status 00000004 00000000 
[   60.816067] eth0: Transmit timeout, status 00000004 00000000 
[   68.816077] eth0: Transmit timeout, status 00000004 00000000 
[   76.816059] eth0: Transmit timeout, status 00000004 00000000 
[   84.816083] eth0: Transmit timeout, status 00000004 00000000 
[   92.816066] eth0: Transmit timeout, status 00000004 00000000 
[  100.816057] eth0: Transmit timeout, status 00000004 00000000 
[  108.816048] eth0: Transmit timeout, status 00000004 00000000 
[  116.816061] eth0: Transmit timeout, status 00000004 00000000 
[  124.816058] eth0: Transmit timeout, status 00000004 00000000 
[  132.816064] eth0: Transmit timeout, status 00000004 00000000 
[  134.145262] eth0: Media Link On 100mbps full-duplex 
[  137.376859] NET: Registered protocol family 24
[  203.227558] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away.
[  256.595491] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 2 bytes away.
[  421.193122] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 2 bytes away.
[  443.876159] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away.
[  583.822397] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 2 bytes away.
[  585.475485] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 2 bytes away.
[  644.407694] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 3 bytes away.
[ 1247.071467] psmouse.c: Wheel Mouse at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away.
[ 2465.411828] psmouse.c: TouchPad at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
[ 2583.480094] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 2583.801560] usb 1-5: configuration #1 chosen from 1 choice
[ 2583.904198] cfg80211: Calling CRDA to update world regulatory domain
[ 2584.137538] cfg80211: World regulatory domain updated:
[ 2584.137549] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2584.137553] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2584.137556] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2584.137559] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2584.137562] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2584.137565] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2584.269299] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 2584.269311] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 2584.269413] usbcore: registered new interface driver rt2500usb
[ 2584.561923] phy1: Selected rate control algorithm 'pid'
[ 2584.641073] Registered led device: rt73usb-phy1:radio
[ 2584.641118] Registered led device: rt73usb-phy1:assoc
[ 2584.641158] Registered led device: rt73usb-phy1:quality
[ 2584.641803] usbcore: registered new interface driver rt73usb
[ 2589.147131] rt73usb 1-5:1.0: firmware: requesting rt73.bin
[ 2589.425911] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2591.054469] wlan0: authenticate with AP 00:04:ed:64:3d:28
[ 2591.056629] wlan0: authenticated
[ 2591.056640] wlan0: associate with AP 00:04:ed:64:3d:28
[ 2591.058565] wlan0: RX AssocResp from 00:04:ed:64:3d:28 (capab=0x401 status=0 aid=1)
[ 2591.058570] wlan0: associated
[ 2591.089332] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2601.388078] wlan0: no IPv6 routers present
[ 2611.705594] wlan0: authenticate with AP 00:04:ed:64:3d:28
[ 2611.707220] wlan0: authenticated
[ 2611.707227] wlan0: associate with AP 00:04:ed:64:3d:28
[ 2611.709417] wlan0: RX ReassocResp from 00:04:ed:64:3d:28 (capab=0x401 status=0 aid=1)
[ 2611.709423] wlan0: associated
[ 2646.229854] wlan0: disassociating by local choice (reason=3)
[ 2646.285742] wlan0: authenticate with AP 00:04:ed:64:3d:28
[ 2646.287569] wlan0: authenticated
[ 2646.287579] wlan0: associate with AP 00:04:ed:64:3d:28
[ 2646.289588] wlan0: RX AssocResp from 00:04:ed:64:3d:28 (capab=0x401 status=0 aid=1)
[ 2646.289595] wlan0: associated
[ 2646.291063] wlan0: disassociating by local choice (reason=3)
[ 2647.898607] wlan0: authenticate with AP 00:04:ed:64:3d:28
[ 2647.901370] wlan0: authenticated
[ 2647.901380] wlan0: associate with AP 00:04:ed:64:3d:28
[ 2647.903404] wlan0: RX ReassocResp from 00:04:ed:64:3d:28 (capab=0x401 status=0 aid=1)
[ 2647.903411] wlan0: associated
[ 3740.446335] usb 1-5: USB disconnect, address 2
[ 3740.461676] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[ 3740.461690] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 3740.461698] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[ 3740.461706] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[ 3740.461710] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 3740.461767] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 3740.462103] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 3740.462183] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 3740.462264] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 3743.304582] usb 3-2: new full speed USB device using ohci_hcd and address 2
[ 3743.900266] usb 3-2: device not accepting address 2, error -62
[ 3744.084110] usb 3-2: new full speed USB device using ohci_hcd and address 3
[ 3744.268306] usb 3-2: device descriptor read/64, error -62
[ 3744.544653] usb 3-2: device descriptor read/64, error -62
[ 3744.835366] usb 3-2: new full speed USB device using ohci_hcd and address 4
[ 3745.253960] usb 3-2: device not accepting address 4, error -62
[ 3745.430922] usb 3-2: new full speed USB device using ohci_hcd and address 5
[ 3745.840118] usb 3-2: device not accepting address 5, error -62
[ 3745.840165] hub 3-0:1.0: unable to enumerate USB device on port 2
Ultima modifica di Janvitus il martedì 14 luglio 2009, 15:04, modificato 1 volta in totale.
Avatar utente
Janvitus
Amministratore
Amministratore
Messaggi: 18787
Iscrizione: lunedì 25 aprile 2005, 15:52
Desktop: GNOME Shell / Xfce
Sesso: Maschile
Località: Potenza
Contatti:

Re: configurare philips voip 321 x ubuntu

Messaggio da Janvitus »

Prossima volta usa "inserisci codice" per cose lunghe.

Comunque, mi sa che non te lo riconosce, o meglio, ci sono problemi nel riconoscimento.

http://www.google.it/search?hl=it&safe= ... erca&meta=
+Fedora 40 • +Xubuntu 24.04
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 8 ospiti