Codice: Seleziona tutto
Complete error log:
SMART Error Log Version: 1
Warning: ATA error count 10147 inconsistent with error log pointer 5
ATA Error Count: 10147 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 10147 occurred at disk power-on lifetime: 4684 hours (195 days + 4 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 0f 10 04 e2 Error: ICRC, ABRT at LBA = 0x0204100f = 33820687
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 0f 10 04 e2 08 00:05:52.816 READ DMA
c8 00 80 8f 0f 04 e2 08 00:05:52.816 READ DMA
c8 00 80 0f 0f 04 e2 08 00:05:52.816 READ DMA
c8 00 80 8f 0e 04 e2 08 00:05:52.816 READ DMA
c8 00 80 0f 0e 04 e2 08 00:05:52.816 READ DMA
Error 10146 occurred at disk power-on lifetime: 4674 hours (194 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 08 00:04:45.136 READ DMA
f8 00 00 00 00 00 e0 08 00:04:45.104 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 00:04:45.088 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 0a 00:04:45.088 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 00:04:45.088 READ NATIVE MAX ADDRESS
Error 10145 occurred at disk power-on lifetime: 4671 hours (194 days + 15 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 08 00:04:45.504 READ DMA
f8 00 00 00 00 00 e0 08 00:04:45.488 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 00:04:45.488 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 0a 00:04:45.472 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 00:04:45.472 READ NATIVE MAX ADDRESS
Error 10144 occurred at disk power-on lifetime: 4671 hours (194 days + 15 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 08 00:04:45.296 READ DMA
f8 00 00 00 00 00 e0 08 00:04:45.264 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 00:04:45.264 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 0a 00:04:45.248 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 00:04:45.248 READ NATIVE MAX ADDRESS
Error 10143 occurred at disk power-on lifetime: 4667 hours (194 days + 11 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 8f de 7c e5 Error: ICRC, ABRT at LBA = 0x057cde8f = 92069519
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f de 7c e5 08 03:55:39.344 READ DMA
f8 00 00 00 00 00 e0 08 03:55:39.328 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 03:55:39.328 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 0a 03:55:39.312 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 03:55:39.312 READ NATIVE MAX ADDRESSGrazie mille

