Pagina 1 di 1

[RISOLTO]problemi risoluzione schermo a strisce AIUTO

Inviato: lunedì 20 luglio 2009, 20:47
da Buenaventura
Salve a tutti, uso Ubuntu da circa 2 anni ho iniziato con la versione 7.10 e da alcuni mesi sono passato ad Hardy che trovo magnifico. Vengo al problema, da  questa mattina è cambiata la risoluzione della schermo, fino a ieri avevo 1280x1024 con una scheda video SIS mirage 3. Adesso non mi indica solo 800x600 e 640x480.
Vi posto il mio xorg.conf

Codice: Seleziona tutto

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"it"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Scheda video generica"
	Driver		"vesa"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Acer AL1916W"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Scheda video generica"
	Monitor		"Acer AL1916W"
	DefaultDepth	24
	SubSection "Display"
		Modes		"1440x1440" "1440x900" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"

# Uncomment if you have a wacom tablet
#	InputDevice     "stylus"	"SendCoreEvents"
#	InputDevice     "cursor"	"SendCoreEvents"
#	InputDevice     "eraser"	"SendCoreEvents"
EndSection
Vi assicuro si vede Enorme e con una striscia nera a sinistra.
Grazie mille a chi potrà aiutarmi.

Saluti Paolo

Re: problemi risoluzione schermo

Inviato: lunedì 20 luglio 2009, 20:59
da nico@nico
http://ncc-1701a.homelinux.net/~linux-s ... =Downloads
ci sono passato pure io
al link trovi quello che ti serve

Re: problemi risoluzione schermo

Inviato: lunedì 20 luglio 2009, 21:42
da Buenaventura
Ciao, innanzi tutto grazie per la segnalazione e la risposta, ma il problema è che fino a ieri sera funzionava la risoluzione 1280x1024, che mi andava benissimo, che adesso è sparita. Inoltre dal link segnalato quali drive dovrei utilizzare per hardy?

Grazie mille

Saluti Paolo

Re: problemi risoluzione schermo

Inviato: lunedì 20 luglio 2009, 22:58
da nico@nico
1280x1024
avevi un secondo schermo collegato?

comunque quelli che devi scaricare sono "sis_vga_150508_ubuntu_8.04.tar.bz2" che trovi circa a metà pagina,
hai ubuntu, vero? perchè per kubuntu 8.04 esistono anche i driver 3D (anche se non è detto che funzionino perfettamente).

Re: problemi risoluzione schermo a strisce AIUTO

Inviato: martedì 21 luglio 2009, 7:45
da Buenaventura
Grazie della risposta. Comunque nel fratempo la situazione è precipitata, nel tentativo (maldestro)
di modificare xorg adesso lo schermo è a strisce con immagini multiple e non si vede nulla. Adesso sto scrivendo con winzoz. Ci sono 2 anni di lavoro se potete aiutatemi.

Grazie saluti Paolo

Re: problemi risoluzione schermo a strisce AIUTO

Inviato: martedì 21 luglio 2009, 7:53
da patel
prova dal menu di avvio a scegliere recovery e al menu successivo l'ultima voce.
Stai tranquillo che non perdi i tuoi lavori, li puoi sempre recuperare dal cdlive.

Re: problemi risoluzione schermo a strisce AIUTO

Inviato: martedì 21 luglio 2009, 8:09
da Buenaventura
Grazie mille, adesso la situazione è tornata come prima cioè risoluzione enorme. immagino che dovrò rimodificare xorg. Per evitare altre bestialità, mi potresti dire come fare.

Grazie infinite

Saluti Paolo

Re: problemi risoluzione schermo a strisce AIUTO

Inviato: martedì 21 luglio 2009, 8:12
da patel
Sistema, amministrazione, driver hardware
Altrimenti posta xorg.conf e controlla se è rimasta una versione di backup

Re: problemi risoluzione schermo a strisce AIUTO

Inviato: martedì 21 luglio 2009, 8:21
da Buenaventura
Allora, in driver hardware dice che non ci sono hardware proprietari. il mio xorg.conf attuale

Codice: Seleziona tutto

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"it"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
EndSection
è diverso da quello del primo post che faccio?
Grazie mille per la pazienza.

Saluti Paolo

Re: problemi risoluzione schermo a strisce AIUTO

Inviato: martedì 21 luglio 2009, 8:56
da patel
io proverei ad aggiungere

Codice: Seleziona tutto

Section "Screen"
	Identifier	"Default Screen"
	Device		"Scheda video generica"
	Monitor		"Acer AL1916W"
	DefaultDepth	24
	SubSection "Display"
		Modes		"1280x1024"  "1024x768"  "640x480"
	EndSubSection
EndSection
se non funziona rimetti il vecchio

[RISOLTO]: problemi risoluzione schermo a strisce AIUTO

Inviato: martedì 21 luglio 2009, 9:33
da Buenaventura
Grazie infinite adesso funzionano tutte e tre, anche se le scritte sembrano più piccole di prima, sei stato veramente eccezionale. Ma secondo te da cosa può essere successo e i driver consigliatimi da nico@nico funzionano e come si istallano?

Grazie di tutto (b2b) e ancora viva l'open source

Re: [RISOLTO]problemi risoluzione schermo a strisce AIUTO

Inviato: martedì 21 luglio 2009, 9:58
da patel
forse un aggiornamento potrebbe essere la causa.