multifunzione all-in one lexmark x75 come fare?

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
supercar
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1443
Iscrizione: martedì 23 settembre 2008, 2:10
Desktop: mate
Distribuzione: ubuntu 14.04
Località: sicilia

multifunzione all-in one lexmark x75 come fare?

Messaggio da supercar »

salve,
ho rispolverato una vecchia lexmark all-in one x75 per farne una fotocopiatrice portatile viste le dimensioni.....

naturalmente jaunty non la riconosce affatto nè come stampante, ne come scanner,  in giro non ho trovato nulla ed il sito del produttore non conosce linux!

avete qualche soluzione?
il mio blog http://biagiosupercar.wordpress.com/

se fai del bene scordati, se fai del male pensaci
Avatar utente
perfab
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 4880
Iscrizione: venerdì 5 ottobre 2007, 23:02
Desktop: Ubuntu
Distribuzione: Ubuntu 22.04.3 LTS
Sesso: Maschile
Località: Roma

Re: multifunzione all-in one lexmark x75 come fare?

Messaggio da perfab »

forse, dico forse ti funzionerà come printer ma non come scanner:
http://home.online.no/~enrio/
Vale la pena di lottare solo per le cose senza le quali non vale la pena di vivere.
Ernesto Che Guevara de la Serna;
Avatar utente
supercar
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1443
Iscrizione: martedì 23 settembre 2008, 2:10
Desktop: mate
Distribuzione: ubuntu 14.04
Località: sicilia

Re: multifunzione all-in one lexmark x75 come fare?

Messaggio da supercar »

maleducatista ha scritto: forse, dico forse ti funzionerà come printer ma non come scanner:
http://home.online.no/~enrio/
funzionerebbe la stampante , ma lo scanner è proprio indigesto per xane, però se do questo comando viene rilevata:

lsusb
Bus 002 Device 011: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
Bus 002 Device 003: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 004: ID 043d:0069 Lexmark International, Inc. X74/X75 Printer
Bus 004 Device 003: ID 043d:0060 Lexmark International, Inc. X74/X75 Scanner
Bus 004 Device 002: ID 043d:0061 Lexmark International, Inc. X74 Hub

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
il mio blog http://biagiosupercar.wordpress.com/

se fai del bene scordati, se fai del male pensaci
Avatar utente
perfab
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 4880
Iscrizione: venerdì 5 ottobre 2007, 23:02
Desktop: Ubuntu
Distribuzione: Ubuntu 22.04.3 LTS
Sesso: Maschile
Località: Roma

Re: multifunzione all-in one lexmark x75 come fare?

Messaggio da perfab »

bhe c'è speranza allora...
Vale la pena di lottare solo per le cose senza le quali non vale la pena di vivere.
Ernesto Che Guevara de la Serna;
Avatar utente
supercar
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1443
Iscrizione: martedì 23 settembre 2008, 2:10
Desktop: mate
Distribuzione: ubuntu 14.04
Località: sicilia

Re: multifunzione all-in one lexmark x75 come fare?

Messaggio da supercar »

maleducatista ha scritto: bhe c'è speranza allora...
cercando su google ho trovato questa pagina dove forse si potrebbe compilare il driver giusto magari manualmente.... ovviamente in non ci capisco un tubo.

http://www.sane-project.org/unsupported ... k-x75.html
il mio blog http://biagiosupercar.wordpress.com/

se fai del bene scordati, se fai del male pensaci
Avatar utente
perfab
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 4880
Iscrizione: venerdì 5 ottobre 2007, 23:02
Desktop: Ubuntu
Distribuzione: Ubuntu 22.04.3 LTS
Sesso: Maschile
Località: Roma

Re: multifunzione all-in one lexmark x75 come fare?

Messaggio da perfab »

si ma il link al sito lexmark non funge più...
Vale la pena di lottare solo per le cose senza le quali non vale la pena di vivere.
Ernesto Che Guevara de la Serna;
Avatar utente
supercar
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1443
Iscrizione: martedì 23 settembre 2008, 2:10
Desktop: mate
Distribuzione: ubuntu 14.04
Località: sicilia

Re: multifunzione all-in one lexmark x75 come fare?

Messaggio da supercar »

maleducatista ha scritto: si ma il link al sito lexmark non funge più...
si certo lo avevo notato,
io mi a questo:

X74:
T:  Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=043d ProdID=0060 Rev= 1.00
S:  Manufacturer=Lexmark
S:  Product=All-in-One
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  8 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  1 Ivl=250ms

X74 (printer part):
T:  Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=043d ProdID=0069 Rev= 1.00
S:  Manufacturer=Lexmark
S:  Product=Lexmark All-in-One
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  4mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=  16 Ivl=0ms

X75:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=043d ProdID=0061 Rev= 1.00
S:  Manufacturer=Lexmark
S:  Product=USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  8mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  1 Ivl=255ms
T:  Bus=03 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=043d ProdID=0060 Rev= 1.00
S:  Manufacturer=Lexmark
S:  Product=All-in-One
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  8 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  1 Ivl=250ms
T:  Bus=03 Lev=02 Prnt=03 Port=01 Cnt=02 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=043d ProdID=0069 Rev= 1.00
S:  Manufacturer=Lexmark
S:  Product=Lexmark All-in-One
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  4mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=  16 Ivl=0ms

X75:

bLength              18
bDescriptorType      1
bcdUSB                1.10
bDeviceClass          0
bDeviceSubClass      0
bDeviceProtocol      0
bMaxPacketSize0      8
idVendor              0x043D
idProduct            0x0060
bcdDevice            1.00
iManufacturer        1 ((null))
iProduct              2 ((null))
iSerialNumber        0 ()
bNumConfigurations    1

bLength              9
bDescriptorType      2
wTotalLength        39
bNumInterfaces      1
bConfigurationValue  1
iConfiguration      6 ((null))
bmAttributes        224 (Self-poweredRemote Wakeup)
MaxPower            0 mA
 
 
  bLength            9
  bDescriptorType    4
  bInterfaceNumber  0
  bAlternateSetting  0
  bNumEndpoints      3
  bInterfaceClass    255
  bInterfaceSubClass 0
  bInterfaceProtocol 255
  iInterface        7 ((null))
   
    bLength          7
    bDescriptorType  5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval        0 ms
    bRefresh          0
    bSynchAddress    0
   
    bLength          7
    bDescriptorType  5
    bEndpointAddress  0x02 (out 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    8
    bInterval        0 ms
    bRefresh          0
    bSynchAddress    0
   
    bLength          7
    bDescriptorType  5
    bEndpointAddress  0x83 (in 0x03)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval        250 ms
    bRefresh          0
    bSynchAddress    0


    checking for GT-6801 ...
    this is not a GT-6801 (bDeviceClass = 0)
    checking for GT-6816 ...
    this is not a GT-6816 (bNumEndpoints = 3)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for MA-1015 ...
    this is not a MA-1015 (bDeviceClass = 0)
    checking for MA-1509 ...
    this is not a MA-1509 (bDeviceClass = 0)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bEndpointAddress = 0x81, bmAttributes = 0x2, wMaxPacketSize = 0x40, bInterval = 0x0)
    checking for GL646 ...
    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)


found USB scanner (vendor=0x043d, product=0x0060) at libusb:001:003

X75 PrinTrio:
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=043d ProdID=0060 Rev= 1.00
S:  Manufacturer=Lexmark
S:  Product=All-in-One
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  8 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  1 Ivl=250ms
il mio blog http://biagiosupercar.wordpress.com/

se fai del bene scordati, se fai del male pensaci
Avatar utente
perfab
Imperturbabile Insigne
Imperturbabile Insigne
Messaggi: 4880
Iscrizione: venerdì 5 ottobre 2007, 23:02
Desktop: Ubuntu
Distribuzione: Ubuntu 22.04.3 LTS
Sesso: Maschile
Località: Roma

Re: multifunzione all-in one lexmark x75 come fare?

Messaggio da perfab »

è il tuo

Codice: Seleziona tutto

sane-find-scanner -v -v
quello?
Vale la pena di lottare solo per le cose senza le quali non vale la pena di vivere.
Ernesto Che Guevara de la Serna;
Avatar utente
supercar
Entusiasta Emergente
Entusiasta Emergente
Messaggi: 1443
Iscrizione: martedì 23 settembre 2008, 2:10
Desktop: mate
Distribuzione: ubuntu 14.04
Località: sicilia

Re: multifunzione all-in one lexmark x75 come fare?

Messaggio da supercar »

maleducatista ha scritto: è il tuo

Codice: Seleziona tutto

sane-find-scanner -v -v
quello?
no dove l'hai preso?
il mio blog http://biagiosupercar.wordpress.com/

se fai del bene scordati, se fai del male pensaci
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: 0 utenti iscritti e 4 ospiti