blocco pc al login

[marco81]

Salve, ho un AMD 64 con scheda video ATI e non riesco a far partire il sistema se non in modalità recovery. In modalità normale, infatti, il computer si blocca completamente al momento del login, ho provato ad installare i driver ATI seguendo il wiki ma non c'è stato nessun risultato positivo...come si può fare?
grazie
Marco

[colombre]

Cioè il pc funziona solo in modalità testuale e ti si inchioda il server x?
Prova a controllare il log di xorg /var/log/Xorg.0.log e vedi cosa ti dice

[marco81]

No, una volta che il pc si inchioda al login non c'è modo di tornare alla modalità testuale, la tastiera non funziona quindi non posso neanche fare ctrl alt F2. Il pc si avvia solo se scelgo la modalità recovery al boot
M

[colombre]

e alora vai in modalità recovery e cerce d vedere che errori ti da con un dmesg e poi controlla i vari log

[marco81]

Non ci capisco molto e quindi non ci vedo nulla di strano perciò posto direttamente:

Codice: Seleziona tutto

marco@ubuntu:~$ dmesg
[17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4. 0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f4fa0
[17179569.184000] On node 0 totalpages: 131056
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 126960 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia                                ) @ 0x0 00f6930
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @  0x1fff3000
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @  0x1fff3040
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @  0x1fff7ac0
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @  0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:d ec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda2 ro single
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[17179569.184000] Detected 2009.989 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.020000] Dentry cache hash table entries: 131072 (order: 7, 524288 byte s)
[17179570.020000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.028000] Memory: 508852k/524224k available (1976k kernel code, 14804k r eserved, 606k data, 288k init, 0k highmem)
[17179570.028000] Checking if this processor honours the WP bit even in supervis or mode... Ok.
[17179570.108000] Calibrating delay using timer specific routine.. 4024.01 BogoM IPS (lpj=8048023)
[17179570.108000] Security Framework v1.0.0 initialized
[17179570.108000] SELinux:  Disabled at boot.
[17179570.108000] Mount-cache hash table entries: 512
[17179570.108000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179570.108000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 0 0000000 00000001 00000000 00000001
[17179570.108000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/li ne)
[17179570.108000] CPU: L2 Cache: 256K (64 bytes/line)
[17179570.108000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 0000041 0 00000001 00000000 00000001
[17179570.108000] mtrr: v2.0 (20020519)
[17179570.108000] CPU: AMD Sempron(tm) Processor 3400+ stepping 02
[17179570.108000] Enabling fast FPU save and restore... done.
[17179570.108000] Enabling unmasked SIMD FPU exception support... done.
[17179570.108000] Checking 'hlt' instruction... OK.
[17179570.124000] checking if image is initramfs... it is
[17179570.608000] Freeing initrd memory: 6617k freed
[17179570.620000] ACPI: Looking for DSDT ... not found!
[17179570.620000] ENABLING IO-APIC IRQs
[17179570.620000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179570.768000] NET: Registered protocol family 16
[17179570.768000] EISA bus registered
[17179570.768000] ACPI: bus type pci registered
[17179570.780000] PCI: PCI BIOS revision 2.10 entry at 0xfafd0, last bus=2
[17179570.780000] PCI: Using configuration type 1
[17179570.780000] ACPI: Subsystem revision 20051216
[17179570.788000] ACPI: Interpreter enabled
[17179570.788000] ACPI: Using IOAPIC for interrupt routing
[17179570.788000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.788000] PCI: Probing PCI hardware (bus 00)
[17179570.792000] Boot video device is 0000:01:00.0
[17179570.796000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.852000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179570.852000] ACPI: Power Resource [ISAV] (on)
[17179570.852000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179570.852000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14  15)
[17179570.856000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.856000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 *12 14  15)
[17179570.856000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14  15)
[17179570.856000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 9 10 11 12 14  15)
[17179570.856000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 11 *12 14  15)
[17179570.856000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 11 *12 14  15)
[17179570.860000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 *10 11 12 14  15)
[17179570.860000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.860000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14  15)
[17179570.860000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.860000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 *10 11 12 14  15)
[17179570.860000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 11 *12 14  15)
[17179570.860000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.864000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.864000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.864000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.864000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14  15)
[17179570.864000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[17179570.864000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[17179570.868000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[17179570.868000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[17179570.868000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179570.868000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[17179570.868000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[17179570.868000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[17179570.868000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[17179570.868000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[17179570.868000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[17179570.872000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[17179570.872000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[17179570.872000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[17179570.872000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[17179570.872000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[17179570.872000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
[17179570.872000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled.
[17179570.876000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.876000] pnp: PnP ACPI init
[17179570.880000] pnp: PnP ACPI: found 12 devices
[17179570.880000] PnPBIOS: Disabled by ACPI PNP
[17179570.880000] PCI: Using ACPI for IRQ routing
[17179570.880000] PCI: If a device doesn't work, try "pci=routeirq".  If it help s, post a report
[17179570.900000] pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
[17179570.900000] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
[17179570.900000] pnp: 00:00: ioport range 0x1400-0x147f has been reserved
[17179570.900000] pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
[17179570.900000] pnp: 00:00: ioport range 0x1800-0x187f has been reserved
[17179570.900000] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
[17179570.900000] PCI: Bridge: 0000:00:0b.0
[17179570.900000]   IO window: 9000-9fff
[17179570.900000]   MEM window: fa000000-fbffffff
[17179570.900000]   PREFETCH window: e8000000-f7ffffff
[17179570.900000] PCI: Bridge: 0000:00:0e.0
[17179570.900000]   IO window: a000-afff
[17179570.900000]   MEM window: fc000000-fcffffff
[17179570.900000]   PREFETCH window: disabled.
[17179570.900000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[17179570.900000] audit: initializing netlink socket (disabled)
[17179570.900000] audit(1156003833.900:1): initialized
[17179570.904000] VFS: Disk quotas dquot_6.5.1
[17179570.904000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.904000] Initializing Cryptographic API
[17179570.904000] io scheduler noop registered
[17179570.904000] io scheduler anticipatory registered
[17179570.904000] io scheduler deadline registered
[17179570.904000] io scheduler cfq registered
[17179570.904000] isapnp: Scanning for PnP cards...
[17179571.256000] isapnp: No Plug & Play device found
[17179571.268000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179571.268000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179571.268000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.268000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.268000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ shar ing enabled
[17179571.268000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.268000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.272000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.272000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.272000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 b locksize
[17179571.272000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.272000] ide: Assuming 33MHz system bus speed for PIO modes; override w ith idebus=xx
[17179571.272000] mice: PS/2 mouse device common for all mice
[17179571.272000] EISA: Probing bus 0 at eisa.0
[17179571.272000] Cannot allocate resource for EISA slot 1
[17179571.272000] Cannot allocate resource for EISA slot 2
[17179571.272000] EISA: Detected 0 cards.
[17179571.272000] NET: Registered protocol family 2
[17179571.308000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes )
[17179571.308000] TCP established hash table entries: 32768 (order: 5, 131072 by tes)
[17179571.308000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.308000] TCP: Hash tables configured (established 32768 bind 32768)
[17179571.308000] TCP reno registered
[17179571.308000] TCP bic registered
[17179571.308000] NET: Registered protocol family 1
[17179571.308000] NET: Registered protocol family 8
[17179571.308000] NET: Registered protocol family 20
[17179571.308000] Using IPI Shortcut mode
[17179571.308000] ACPI wakeup devices:
[17179571.308000] HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
[17179571.308000] ACPI: (supports S0 S1 S4 S5)
[17179571.308000] Freeing unused kernel memory: 288k freed
[17179571.344000] Capability LSM initialized
[17179571.576000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.728000] SCSI subsystem initialized
[17179571.732000] ACPI: bus type scsi registered
[17179571.732000] libata version 1.20 loaded.
[17179571.732000] sata_nv 0000:00:0a.0: version 0.8
[17179571.732000] **** SET: Misaligned resource pointer: dfcc6e02 Type 07 Len 0
[17179571.732000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[17179571.732000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 ( level, high) -> IRQ 177
[17179571.732000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[17179571.732000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 1 77
[17179571.732000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 1 77
[17179571.936000] ata1: no device found (phy stat 00000000)
[17179571.936000] scsi0 : sata_nv
[17179572.140000] ata2: no device found (phy stat 00000000)
[17179572.140000] scsi1 : sata_nv
[17179572.140000] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
[17179572.140000] NFORCE3-250: chipset revision 162
[17179572.140000] NFORCE3-250: not 100% native mode: will probe irqs later
[17179572.140000] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
[17179572.140000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb :DMA
[17179572.140000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd :DMA
[17179572.140000] Probing IDE interface ide0...
[17179572.428000] hda: Maxtor 6Y060L0, ATA DISK drive
[17179573.100000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179573.112000] Probing IDE interface ide1...
[17179574.128000] hdd: TSSTcorpCD/DVDW SH-S162A, ATAPI CD/DVD-ROM drive
[17179574.184000] ide1 at 0x170-0x177,0x376 on irq 15
[17179574.192000] hda: max request size: 128KiB
[17179574.196000] hda: Host Protected Area detected.
[17179574.196000]       current capacity is 120101087 sectors (61491 MB)
[17179574.196000]       native  capacity is 120103200 sectors (61492 MB)
[17179574.220000] hda: Host Protected Area disabled.
[17179574.220000] hda: 120103200 sectors (61492 MB) w/2048KiB Cache, CHS=65535/1 6/63, UDMA(33)
[17179574.220000] hda: cache flushes supported
[17179574.220000]  hda: hda1 hda2 hda3 hda4
[17179574.268000] hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179574.268000] Uniform CD-ROM driver Revision: 3.20
[17179574.652000] usbcore: registered new driver usbfs
[17179574.652000] usbcore: registered new driver hub
[17179574.656000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179574.656000] **** SET: Misaligned resource pointer: dfcc6102 Type 07 Len 0
[17179574.656000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[17179574.656000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 ( level, high) -> IRQ 185
[17179574.656000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179574.656000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179574.656000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus nu mber 1
[17179574.656000] ohci_hcd 0000:00:02.0: irq 185, io mem 0xfd003000
[17179574.712000] hub 1-0:1.0: USB hub found
[17179574.712000] hub 1-0:1.0: 4 ports detected
[17179574.724000] USB Universal Host Controller Interface driver v2.3
[17179574.752000] forcedeth.c: Reverse Engineered nForce ethernet driver. Versio n 0.54.
[17179574.816000] **** SET: Misaligned resource pointer: de962cc2 Type 07 Len 0
[17179574.816000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
[17179574.816000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 ( level, high) -> IRQ 193
[17179574.816000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179574.816000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179574.816000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus nu mber 2
[17179574.816000] ohci_hcd 0000:00:02.1: irq 193, io mem 0xfd004000
[17179574.872000] hub 2-0:1.0: USB hub found
[17179574.872000] hub 2-0:1.0: 4 ports detected
[17179574.976000] **** SET: Misaligned resource pointer: de9629c2 Type 07 Len 0
[17179574.976000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[17179574.976000] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [APC3] -> GSI 18 ( level, low) -> IRQ 201
[17179574.976000] PCI: VIA IRQ fixup for 0000:02:06.0, from 12 to 9
[17179574.976000] uhci_hcd 0000:02:06.0: UHCI Host Controller
[17179574.976000] uhci_hcd 0000:02:06.0: new USB bus registered, assigned bus nu mber 3
[17179574.976000] uhci_hcd 0000:02:06.0: irq 201, io base 0x0000a000
[17179574.976000] hub 3-0:1.0: USB hub found
[17179574.976000] hub 3-0:1.0: 2 ports detected
[17179574.976000] **** SET: Misaligned resource pointer: de9627c2 Type 07 Len 0
[17179574.976000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[17179574.976000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 ( level, high) -> IRQ 177
[17179574.976000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179574.976000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179574.976000] ehci_hcd 0000:00:02.2: debug port 1
[17179574.976000] PCI: cache line size of 64 is not supported by device 0000:00: 02.2
[17179575.080000] **** SET: Misaligned resource pointer: de9626c2 Type 07 Len 0
[17179575.080000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179575.080000] ACPI: PCI Interrupt 0000:02:06.1[B] -> Link [APC4] -> GSI 19 ( level, low) -> IRQ 209
[17179575.080000] PCI: VIA IRQ fixup for 0000:02:06.1, from 10 to 1
[17179575.080000] uhci_hcd 0000:02:06.1: UHCI Host Controller
[17179575.080000] uhci_hcd 0000:02:06.1: new USB bus registered, assigned bus nu mber 4
[17179575.080000] uhci_hcd 0000:02:06.1: irq 209, io base 0x0000a400
[17179575.080000] hub 4-0:1.0: USB hub found
[17179575.080000] hub 4-0:1.0: 2 ports detected
[17179575.120000] usb 1-3: new low speed USB device using ohci_hcd and address 2
[17179575.184000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus nu mber 5
[17179575.184000] ehci_hcd 0000:00:02.2: irq 177, io mem 0xfd005000
[17179575.184000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 D ec 2004
[17179575.184000] hub 5-0:1.0: USB hub found
[17179575.184000] hub 5-0:1.0: 8 ports detected
[17179575.288000] **** SET: Misaligned resource pointer: de9620c2 Type 07 Len 0
[17179575.288000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[17179575.288000] ACPI: PCI Interrupt 0000:02:06.2[C] -> Link [APC1] -> GSI 16 ( level, low) -> IRQ 217
[17179575.288000] ehci_hcd 0000:02:06.2: EHCI Host Controller
[17179575.288000] ehci_hcd 0000:02:06.2: new USB bus registered, assigned bus nu mber 6
[17179575.288000] ehci_hcd 0000:02:06.2: irq 217, io mem 0xfc022000
[17179575.288000] ehci_hcd 0000:02:06.2: USB 2.0 started, EHCI 1.00, driver 10 D ec 2004
[17179575.288000] hub 6-0:1.0: USB hub found
[17179575.288000] hub 6-0:1.0: 4 ports detected
[17179575.288000] **** SET: Misaligned resource pointer: de957e02 Type 07 Len 0
[17179575.288000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[17179575.288000] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 21 ( level, high) -> IRQ 185
[17179575.288000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[17179575.808000] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:05.0
[17179575.932000] Attempting manual resume
[17179575.964000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179575.964000] EXT3-fs: write access will be enabled during recovery.
[17179576.344000] EXT3-fs: recovery complete.
[17179576.344000] kjournald starting.  Commit interval 5 seconds
[17179576.368000] EXT3-fs: mounted filesystem with ordered data mode.
[17179576.432000] ohci_hcd 0000:00:02.0: wakeup
[17179576.816000] usb 1-3: new low speed USB device using ohci_hcd and address 3
[17179577.280000] usb 3-2: new full speed USB device using uhci_hcd and address 2
[17179577.664000] usb 4-1: new full speed USB device using uhci_hcd and address 2
[17179589.700000] Linux agpgart interface v0.101 (c) Dave Jones
[17179589.704000] agpgart: Detected AGP bridge 0
[17179589.704000] agpgart: Setting up Nforce3 AGP.
[17179589.704000] agpgart: AGP aperture is 32M @ 0xf8000000
[17179589.744000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[17179589.744000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000
[17179589.892000] **** SET: Misaligned resource pointer: dbd379c2 Type 07 Len 0
[17179589.892000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[17179589.896000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 ( level, high) -> IRQ 193
[17179589.896000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179590.032000] input: PC Speaker as /class/input/input1
[17179590.216000] intel8x0_measure_ac97_clock: measured 54622 usecs
[17179590.216000] intel8x0: clocking to 46959
[17179590.328000] Real Time Clock Driver v1.12
[17179590.332000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179590.352000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.380000] usbcore: registered new driver hiddev
[17179590.392000] input: Microsoft Microsoft Wheel Mouse Optical? as /class/inpu t/input2
[17179590.392000] input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Op tical?] on usb-0000:00:02.0-3
[17179590.392000] usbcore: registered new driver usbhid
[17179590.392000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179590.528000] parport: PnPBIOS parport detected.
[17179590.528000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179590.536000] NET: Registered protocol family 17
[17179590.984000] Floppy drive(s): fd0 is 1.44M
[17179591.000000] ts: Compaq touchscreen protocol output
[17179591.024000] acx: Loaded combined PCI/USB driver, firmware_ver=default
[17179591.024000] acx: compiled to use 32bit I/O access. I/O timing issues might  occur, such as non-working firmware upload. Report them
[17179591.024000] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 ( level, low) -> IRQ 201
[17179591.024000] acx: found ACX111-based wireless network card at 0000:02:0a.0,  irq:201, phymem1:0xFC020000, phymem2:0xFC000000, mem1:0xe09d8000, mem1_size:819 2, mem2:0xe0ac0000, mem2_size:131072
[17179591.120000] FDC 0 is a post-1991 82077
[17179591.252000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer d ev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3F11
[17179591.252000] usbcore: registered new driver usblp
[17179591.252000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class dri ver
[17179591.440000] Linux video capture interface: v1.00
[17179591.468000] drivers/usb/media/spca5xx/spca5xx-main.c: USB SPCA5XX camera f ound. SONIX sn9c102 + Pas106
[17179591.472000] usbcore: registered new driver spca5xx
[17179591.472000] drivers/usb/media/spca5xx/spca5xx-main.c: spca5xx driver 00.57 .08 registered
[17179591.484000] sn9c102: V4L2 driver for SN9C10x PC Camera Controllers v1:1.24 a
[17179591.484000] usbcore: registered new driver sn9c102
[17179592.084000] acx: firmware 'Rev 2.3.1.31' does not work well with this driv er
[17179592.084000] acx: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 (Radia), EEPROM version 0x05, uploaded firmware 'Rev 2.3.1.31' (0x03010101)
[17179592.084000] acx v0.3.21: net device wlan0, driver compiled against wireles s extensions 19 and Linux 2.6.15-26-386
[17179592.084000] usbcore: registered new driver acx_usb
[17179592.176000] lp0: using parport0 (interrupt-driven).
[17179592.220000] Adding 602428k swap on /dev/hda4.  Priority:-1 extents:1 acros s:602428k
[17179592.256000] EXT3 FS on hda2, internal journal
[17179592.376000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179592.376000] md: bitmap version 4.39
[17179592.708000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@ redhat.com
[17179593.652000] cdrom: open failed.
[17179610.580000] kjournald starting.  Commit interval 5 seconds
[17179610.580000] EXT3 FS on hda3, internal journal
[17179610.580000] EXT3-fs: mounted filesystem with ordered data mode.
[17179632.672000] [drm] Initialized drm 1.0.1 20051102
[17179632.680000] **** SET: Misaligned resource pointer: dcd26402 Type 07 Len 0
[17179632.680000] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[17179632.680000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 ( level, low) -> IRQ 217
[17179632.680000] [drm] Initialized radeon 1.24.0 20060225 on minor 0
[17179639.680000] NET: Registered protocol family 10
[17179639.680000] lo: Disabled Privacy Extensions
[17179639.680000] IPv6 over IPv4 tunneling driver
[17179648.420000] wlan0 (WE) : Driver using old /proc/net/wireless support, plea se fix driver !
[17179650.488000] eth0: no IPv6 routers present
[17179703.936000] eth0: no IPv6 routers present
marco@ubuntu:~$

[colombre]

Boh qua sembrerebbe a posto.
Ma se  vai avanti con Ctrl-D funzia o si inchioda?
Se nn si inchioda prova a dare /etc/init.d/gdm force-reload
Se si inchioada prova a guardare il log di xorg

[marco81]

come faccio ad andare avanti se si inchioda?
M

[marco81]

Sono riuscito a premere ctrl+alt+f2 prima che si bloccasse tutto e a quanto pare se faccio il login da riga di comando e poi faccio partire X tutto funziona regolarmente! Logicamente questa procedura èscomodissima, come faccio?
grazie
M

[colombre]

Allora forse il problema potrebbe essere gdm prova a disinstallarlo e reinstallarlo

sudo /etc/init.d /gdm stop
sudo apt-get --purge remove gdm
sudo apt-get install gdm
okkio però siccome ti vuol rimuover anche ubuntu-desktop dopo reinstallalo

oppure prova un bel
sudo /etc/init.d /gdm stop
dpkg-reconfigure gdm
sudo /etc/init.d /gdm force-reload

se vuoi solo vedere cosa fa apt-senza toccare nulla metti in coda ad ogni comando --dry-run
così puoi vedere se andresti incontro a problemi.

Altra cosa che proverei è questa:

sudo /etc/init.d /gdm stop
sudo cp -av /etc/X11/xorg.conf /etc/X11/xorg.conf.old
sudo dpkg-reconfigure xserver-xorg
sudo /etc/init.d /gdm force-reload

Se proprio nn va in alcun modo edita xorg.conf e sostitusci i driver ati con vesa... così l'xorg dovrebbe funzionare
di più nin zo.
Ciao e in bocca al lupo

[marco81]

Niente da fare!!! Grazie lo stesso penso che l'unica cosa che posso fare è provare ad avviare con una scheda video nvidia (se qualche amico me la presta) e vedere se è il caso di cambiarla
Al momento l'unica distribuzione funzionante su quel pc è Mandriva però non mi ci trovo bene come con Ubuntu
ciao e grazie
Marco

[marco81]

Visto che se faccio il login da command line poi tutto funziona, come faccio a disabilitare gdm?
grazie
M