Dando il comando dmesg ottengo
Codice: Seleziona tutto
[ 1.078728] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.078730] Bluetooth: SCO socket layer initialized
[ 1.078768] Bluetooth: RFCOMM TTY layer initialized
[ 1.078772] Bluetooth: RFCOMM socket layer initialized
[ 1.078774] Bluetooth: RFCOMM ver 1.11
[ 1.078810] Using IPI No-Shortcut mode
[ 1.078881] PM: Resume from disk failed.
[ 1.078895] registered taskstats version 1
[ 1.079020] Magic number: 5:74:910
[ 1.079111] rtc_cmos 00:06: setting system clock to 2009-12-30 23:51:22 UTC (1262217082)
[ 1.079115] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.079117] EDD information not available.
[ 1.098478] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.224398] ata5.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HQ04, max MWDMA2
[ 1.240309] ata5.00: configured for MWDMA2
[ 1.536018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.537503] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.537510] ata1.00: ATA-7: ST98823AS, 7.24, max UDMA/100
[ 1.537513] ata1.00: 156301488 sectors, multi 16: LBA48
[ 1.539218] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.539246] ata1.00: configured for UDMA/100
[ 1.552154] scsi 0:0:0:0: Direct-Access ATA ST98823AS 7.24 PQ: 0 ANSI: 5
[ 1.552296] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.552345] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.552400] sd 0:0:0:0: [sda] Write Protect is off
[ 1.552403] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.552432] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.552585] sda:
[ 1.556778] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HQ04 PQ: 0 ANSI: 5
[ 1.567392] sda1 < sda5
[ 1.568051] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.568214] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.568218] Uniform CD-ROM driver Revision: 3.20
[ 1.568316] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.568375] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.590767] sda6 > sda2
[ 1.591080] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.591101] Freeing unused kernel memory: 540k freed
[ 1.591467] Write protecting the kernel text: 4568k
[ 1.591522] Write protecting the kernel read-only data: 1836k
[ 1.688043] usb 3-2: device descriptor read/64, error -71
[ 1.727528] Linux agpgart interface v0.103
[ 1.730700] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 1.731325] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.740213] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.747350] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 1.747458] [Firmware Bug]: _BCQ is used instead of _BQC
[ 1.748664] acpi device:03: registered as cooling_device6
[ 1.748940] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input5
[ 1.749134] ACPI: Video Device [C080] (multi-head: yes rom: no post: no)
[ 1.848433] [drm] Initialized drm 1.1.0 20060810
[ 1.862618] ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.875578] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.875587] i915 0000:00:02.0: setting latency timer to 64
[ 1.916046] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.916287] usb 3-2: device descriptor read/64, error -71
[ 1.988286] b44 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.112069] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
[ 2.112094] b44.c:v2.0
[ 2.132018] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 2.132921] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:08:41:05:c1
[ 2.252009] usb 3-2: device descriptor read/64, error -71
[ 2.400425] [drm] TV-14: set mode NTSC 480i 0
[ 2.476011] usb 3-2: device descriptor read/64, error -71
[ 2.526147] [drm] fb0: inteldrmfb frame buffer device
[ 2.526159] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.593941] [drm] LVDS-8: set mode 1280x800 17
[ 2.729012] usb 3-2: new low speed USB device using uhci_hcd and address 4
[ 2.807841] Console: switching to colour frame buffer device 160x50
[ 3.027145] xor: automatically using best checksumming function: pIII_sse
[ 3.045001] pIII_sse : 5753.000 MB/sec
[ 3.045004] xor: using function: pIII_sse (5753.000 MB/sec)
[ 3.047784] device-mapper: dm-raid45: initialized v0.2594b
[ 3.141012] usb 3-2: device not accepting address 4, error -71
[ 3.176330] PM: Starting manual resume from disk
[ 3.176335] PM: Resume from partition 8:6
[ 3.176337] PM: Checking hibernation image.
[ 3.176457] PM: Resume from disk failed.
[ 3.210771] kjournald starting. Commit interval 5 seconds
[ 3.210784] EXT3-fs: mounted filesystem with writeback data mode.
[ 3.253025] usb 3-2: new low speed USB device using uhci_hcd and address 5
[ 3.664012] usb 3-2: device not accepting address 5, error -71
[ 3.664030] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 4.178981] type=1505 audit(1262217085.599:2): operation="profile_load" pid=439 name=/usr/share/gdm/guest-session/Xsession
[ 4.199294] type=1505 audit(1262217085.616:3): operation="profile_load" pid=440 name=/sbin/dhclient3
[ 4.200185] type=1505 audit(1262217085.620:4): operation="profile_load" pid=440 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.200663] type=1505 audit(1262217085.620:5): operation="profile_load" pid=440 name=/usr/lib/connman/scripts/dhclient-script
[ 4.251736] type=1505 audit(1262217085.668:6): operation="profile_load" pid=441 name=/usr/bin/evince
[ 4.265967] type=1505 audit(1262217085.684:7): operation="profile_load" pid=441 name=/usr/bin/evince-previewer
[ 4.274288] type=1505 audit(1262217085.692:8): operation="profile_load" pid=441 name=/usr/bin/evince-thumbnailer
[ 4.306469] type=1505 audit(1262217085.724:9): operation="profile_load" pid=443 name=/usr/lib/cups/backend/cups-pdf
[ 22.146770] udev: starting version 147
[ 22.171174] lp: driver loaded but no devices found
[ 22.171368] Adding 2907724k swap on /dev/sda6. Priority:-1 extents:1 across:2907724k
[ 22.223809] intel_rng: FWH not detected
[ 22.368467] EXT3 FS on sda5, internal journal
[ 22.405999] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30a2]
[ 22.406025] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[ 22.406032] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[ 22.406035] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[ 22.406042] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01011b22, devctl 0x64
[ 22.409648] parport_pc 00:02: reported by Plug and Play ACPI
[ 22.409729] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 22.426597] ppdev: user-space parallel port driver
[ 22.434382] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.469258] cfg80211: Calling CRDA to update world regulatory domain
[ 22.491017] cfg80211: World regulatory domain updated:
[ 22.491021] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.491025] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.491028] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.491031] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.491034] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.491037] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.514822] lp0: using parport0 (interrupt-driven).
[ 22.538527] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 22.538532] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 22.538623] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 22.538638] iwl3945 0000:10:00.0: setting latency timer to 64
[ 22.558587] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.616299] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 22.616304] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 22.616425] alloc irq_desc for 28 on node -1
[ 22.616427] alloc kstat_irqs on node -1
[ 22.616463] iwl3945 0000:10:00.0: irq 28 for MSI/MSI-X
[ 22.655119] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18
[ 22.655125] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[ 22.655130] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 22.655139] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 22.655143] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
[ 22.655430] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf43fffff
[ 22.655434] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
[ 22.673035] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 22.673050] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.673085] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 22.676685] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 22.716888] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
[ 22.716895] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 22.752702] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 22.775940] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 22.967580] __ratelimit: 9 callbacks suppressed
[ 22.967584] type=1505 audit(1262213504.384:13): operation="profile_replace" pid=1055 name=/usr/share/gdm/guest-session/Xsession
[ 22.969851] type=1505 audit(1262213504.388:14): operation="profile_replace" pid=1056 name=/sbin/dhclient3
[ 22.970734] type=1505 audit(1262213504.388:15): operation="profile_replace" pid=1056 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 22.971213] type=1505 audit(1262213504.388:16): operation="profile_replace" pid=1056 name=/usr/lib/connman/scripts/dhclient-script
[ 22.975720] type=1505 audit(1262213504.392:17): operation="profile_replace" pid=1057 name=/usr/bin/evince
[ 22.991234] type=1505 audit(1262213504.408:18): operation="profile_replace" pid=1057 name=/usr/bin/evince-previewer
[ 22.999582] type=1505 audit(1262213504.416:19): operation="profile_replace" pid=1057 name=/usr/bin/evince-thumbnailer
[ 23.005869] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 23.007928] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 23.008819] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 23.009542] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 23.010471] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 23.015215] type=1505 audit(1262213504.432:20): operation="profile_replace" pid=1061 name=/usr/lib/cups/backend/cups-pdf
[ 23.016243] type=1505 audit(1262213504.436:21): operation="profile_replace" pid=1061 name=/usr/sbin/cupsd
[ 23.019340] type=1505 audit(1262213504.436:22): operation="profile_replace" pid=1062 name=/usr/sbin/mysqld-akonadi
[ 23.057051] iwl3945 0000:10:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 23.075325] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[ 23.144852] Registered led device: iwl-phy0::radio
[ 23.144875] Registered led device: iwl-phy0::assoc
[ 23.144934] Registered led device: iwl-phy0::RX
[ 23.144954] Registered led device: iwl-phy0::TX
[ 23.172152] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.755896] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 23.755899] vboxdrv: Successfully done.
[ 23.755902] vboxdrv: Found 2 processor cores.
[ 23.755987] vboxdrv: fAsync=0 offMin=0x2bc offMax=0x96a
[ 23.756034] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 23.756037] vboxdrv: Successfully loaded version 3.1.2 (interface 0x00100001).
[ 23.771863] [drm] TV-14: set mode NTSC 480i 0
[ 23.914267] [drm] TV-14: set mode NTSC 480i 0
[ 24.195206] [drm] TV-14: set mode NTSC 480i 0
[ 24.335790] [drm] TV-14: set mode NTSC 480i 0
[ 25.192027] usb 3-2: new low speed USB device using uhci_hcd and address 6
[ 25.336024] usb 3-2: device descriptor read/64, error -71
[ 25.570468] usb 3-2: device descriptor read/64, error -71
[ 25.784019] usb 3-2: new low speed USB device using uhci_hcd and address 7
[ 25.904015] usb 3-2: device descriptor read/64, error -71
[ 26.128017] usb 3-2: device descriptor read/64, error -71
[ 26.344020] usb 3-2: new low speed USB device using uhci_hcd and address 8
[ 26.752015] usb 3-2: device not accepting address 8, error -71
[ 26.864017] usb 3-2: new low speed USB device using uhci_hcd and address 9
[ 27.272015] usb 3-2: device not accepting address 9, error -71
[ 27.272032] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 27.691084] [drm] TV-14: set mode NTSC 480i 0
[ 27.831577] [drm] TV-14: set mode NTSC 480i 0
[ 28.108050] [drm] TV-14: set mode NTSC 480i 0
[ 28.249768] [drm] TV-14: set mode NTSC 480i 0
[ 28.546988] [drm] TV-14: set mode NTSC 480i 0
[ 28.687001] [drm] TV-14: set mode NTSC 480i 0
[ 32.465203] b44: eth0: powering down PHY
[ 32.472408] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.644392] Registered led device: iwl-phy0::radio
[ 32.644415] Registered led device: iwl-phy0::assoc
[ 32.644473] Registered led device: iwl-phy0::RX
[ 32.644493] Registered led device: iwl-phy0::TX
[ 32.665315] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.392533] wlan0: authenticate with AP 00:24:89:06:a1:29
[ 35.394317] wlan0: authenticated
[ 35.394320] wlan0: associate with AP 00:24:89:06:a1:29
[ 35.397022] wlan0: RX AssocResp from 00:24:89:06:a1:29 (capab=0x411 status=0 aid=2)
[ 35.397026] wlan0: associated
[ 35.398414] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 35.416309] padlock: VIA PadLock not detected.
[ 40.292005] [drm] TV-14: set mode NTSC 480i 0
[ 40.432104] [drm] TV-14: set mode NTSC 480i 0
[ 40.708285] [drm] TV-14: set mode NTSC 480i 0
[ 40.849892] [drm] TV-14: set mode NTSC 480i 0
[ 41.136407] [drm] TV-14: set mode NTSC 480i 0
[ 41.276611] [drm] TV-14: set mode NTSC 480i 0
[ 43.559007] [drm] TV-14: set mode NTSC 480i 0
[ 43.699234] [drm] TV-14: set mode NTSC 480i 0
[ 46.356009] wlan0: no IPv6 routers present
[ 86.112031] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 86.236029] usb 4-1: device descriptor read/64, error -71
[ 86.468034] usb 4-1: device descriptor read/64, error -71
[ 86.696034] usb 4-1: new low speed USB device using uhci_hcd and address 3
[ 86.820026] usb 4-1: device descriptor read/64, error -71
[ 87.052025] usb 4-1: device descriptor read/64, error -71
[ 87.268012] usb 4-1: new low speed USB device using uhci_hcd and address 4
[ 87.676018] usb 4-1: device not accepting address 4, error -71
[ 87.788024] usb 4-1: new low speed USB device using uhci_hcd and address 5
[ 88.200015] usb 4-1: device not accepting address 5, error -71
[ 88.200037] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 90.873709] usb 4-2: new low speed USB device using uhci_hcd and address 6
[ 91.000022] usb 4-2: device descriptor read/64, error -71
[ 91.224021] usb 4-2: device descriptor read/64, error -71
[ 91.500021] usb 4-2: new low speed USB device using uhci_hcd and address 7
[ 91.632026] usb 4-2: device descriptor read/64, error -71
[ 91.856018] usb 4-2: device descriptor read/64, error -71
[ 92.072014] usb 4-2: new low speed USB device using uhci_hcd and address 8
[ 92.144183] usb 4-2: configuration #1 chosen from 1 choice
[ 92.200751] usbcore: registered new interface driver hiddev
[ 92.215408] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input8
[ 92.215515] generic-usb 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.2-2/input0
[ 92.215537] usbcore: registered new interface driver usbhid
[ 92.215540] usbhid: v2.6:USB HID core driver
[ 94.396020] usb 4-2: reset low speed USB device using uhci_hcd and address 8
[ 94.664017] usb 4-2: device descriptor read/64, error -71
[ 95.041070] usb 4-2: device descriptor read/64, error -71
[ 95.408018] usb 4-2: reset low speed USB device using uhci_hcd and address 8
[ 95.680024] usb 4-2: device descriptor read/64, error -71
[ 96.053040] usb 4-2: device descriptor read/64, error -71
[ 96.416020] usb 4-2: reset low speed USB device using uhci_hcd and address 8
[ 96.828015] usb 4-2: device not accepting address 8, error -71
[ 97.088027] usb 4-2: reset low speed USB device using uhci_hcd and address 8
[ 97.504369] usb 4-2: device not accepting address 8, error -71
[ 97.504415] usb 4-2: USB disconnect, address 8
[ 97.652024] usb 4-2: new low speed USB device using uhci_hcd and address 9
[ 97.772163] usb 4-2: device descriptor read/64, error -71
[ 97.996314] usb 4-2: device descriptor read/64, error -71
[ 98.212011] usb 4-2: new low speed USB device using uhci_hcd and address 10
[ 98.332018] usb 4-2: device descriptor read/64, error -71
[ 98.556016] usb 4-2: device descriptor read/64, error -71
[ 98.772015] usb 4-2: new low speed USB device using uhci_hcd and address 11
[ 99.180013] usb 4-2: device not accepting address 11, error -71
[ 99.292012] usb 4-2: new low speed USB device using uhci_hcd and address 12
[ 99.700015] usb 4-2: device not accepting address 12, error -71
[ 99.700040] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 104.056015] usb 4-1: new low speed USB device using uhci_hcd and address 13
[ 104.180010] usb 4-1: device descriptor read/64, error -71
[ 104.404014] usb 4-1: device descriptor read/64, error -71
[ 104.620014] usb 4-1: new low speed USB device using uhci_hcd and address 14
[ 104.740012] usb 4-1: device descriptor read/64, error -71
[ 104.964011] usb 4-1: device descriptor read/64, error -71
[ 105.180011] usb 4-1: new low speed USB device using uhci_hcd and address 15
[ 105.588107] usb 4-1: device not accepting address 15, error -71
[ 105.700011] usb 4-1: new low speed USB device using uhci_hcd and address 16
[ 106.108020] usb 4-1: device not accepting address 16, error -71
[ 106.108046] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 189.360012] usb 4-1: new low speed USB device using uhci_hcd and address 17
[ 189.743140] usb 4-1: configuration #1 chosen from 1 choice
[ 189.771385] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input9
[ 189.771492] generic-usb 0003:045E:00A4.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 198.940016] usb 4-1: reset low speed USB device using uhci_hcd and address 17
[ 199.612010] usb 4-1: device not accepting address 17, error -71
[ 199.872013] usb 4-1: reset low speed USB device using uhci_hcd and address 17
[ 200.140011] usb 4-1: device descriptor read/64, error -71
[ 200.512011] usb 4-1: device descriptor read/64, error -71
[ 200.876015] usb 4-1: reset low speed USB device using uhci_hcd and address 17
[ 201.284009] usb 4-1: device not accepting address 17, error -71
[ 201.544020] usb 4-1: reset low speed USB device using uhci_hcd and address 17
[ 201.952013] usb 4-1: device not accepting address 17, error -71
[ 201.952053] usb 4-1: USB disconnect, address 17
[ 202.088019] usb 4-1: new low speed USB device using uhci_hcd and address 18
[ 202.208014] usb 4-1: device descriptor read/64, error -71
[ 202.432012] usb 4-1: device descriptor read/64, error -71
[ 202.648015] usb 4-1: new low speed USB device using uhci_hcd and address 19
[ 202.768019] usb 4-1: device descriptor read/64, error -71
[ 202.992009] usb 4-1: device descriptor read/64, error -71
[ 203.208012] usb 4-1: new low speed USB device using uhci_hcd and address 20
[ 203.616013] usb 4-1: device not accepting address 20, error -71
[ 203.728014] usb 4-1: new low speed USB device using uhci_hcd and address 21
[ 204.136010] usb 4-1: device not accepting address 21, error -71
[ 204.136025] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 208.712016] usb 4-2: new low speed USB device using uhci_hcd and address 22
[ 208.832029] usb 4-2: device descriptor read/64, error -71
[ 209.056014] usb 4-2: device descriptor read/64, error -71
[ 209.272013] usb 4-2: new low speed USB device using uhci_hcd and address 23
[ 209.392011] usb 4-2: device descriptor read/64, error -71
[ 209.616012] usb 4-2: device descriptor read/64, error -71
[ 209.832011] usb 4-2: new low speed USB device using uhci_hcd and address 24
[ 210.240009] usb 4-2: device not accepting address 24, error -71
[ 210.352010] usb 4-2: new low speed USB device using uhci_hcd and address 25
[ 210.760010] usb 4-2: device not accepting address 25, error -71
[ 210.760025] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 627.424029] usb 4-1: new low speed USB device using uhci_hcd and address 26
[ 627.611397] usb 4-1: configuration #1 chosen from 1 choice
[ 627.640768] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input10
[ 627.640882] generic-usb 0003:045E:00A4.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 1040.776047] usb 4-1: USB disconnect, address 26
[ 1042.504013] usb 4-2: new low speed USB device using uhci_hcd and address 27
[ 1042.624014] usb 4-2: device descriptor read/64, error -71
[ 1042.848013] usb 4-2: device descriptor read/64, error -71
[ 1043.064012] usb 4-2: new low speed USB device using uhci_hcd and address 28
[ 1043.255396] usb 4-2: configuration #1 chosen from 1 choice
[ 1043.283837] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input11
[ 1043.283945] generic-usb 0003:045E:00A4.0004: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.2-2/input0
[ 1059.780015] usb 4-2: reset low speed USB device using uhci_hcd and address 28
[ 1060.048010] usb 4-2: device descriptor read/64, error -71
[ 1060.420018] usb 4-2: device descriptor read/64, error -71
[ 1060.784016] usb 4-2: reset low speed USB device using uhci_hcd and address 28
[ 1061.052014] usb 4-2: device descriptor read/64, error -71
[ 1061.424011] usb 4-2: device descriptor read/64, error -71
[ 1061.788012] usb 4-2: reset low speed USB device using uhci_hcd and address 28
[ 1062.196010] usb 4-2: device not accepting address 28, error -71
[ 1062.456022] usb 4-2: reset low speed USB device using uhci_hcd and address 28
[ 1062.487344] usb 4-2: device descriptor read/8, error -71
[ 1064.668017] usb 4-2: reset low speed USB device using uhci_hcd and address 28
[ 1066.436026] usb 4-2: reset low speed USB device using uhci_hcd and address 28
[ 1066.704016] usb 4-2: device descriptor read/64, error -71
[ 1067.076014] usb 4-2: device descriptor read/64, error -71
[ 1067.440034] usb 4-2: reset low speed USB device using uhci_hcd and address 28
[ 1069.796024] usb 4-2: reset low speed USB device using uhci_hcd and address 28
[ 1070.468522] usb 4-2: device not accepting address 28, error -71
[ 1070.728020] usb 4-2: reset low speed USB device using uhci_hcd and address 28
[ 1071.227370] usb 4-2: device descriptor read/all, error -71
[ 1071.488016] usb 4-2: reset low speed USB device using uhci_hcd and address 28
[ 1071.896015] usb 4-2: device not accepting address 28, error -71
[ 1072.156023] usb 4-2: reset low speed USB device using uhci_hcd and address 28
[ 1072.564015] usb 4-2: device not accepting address 28, error -71
[ 1072.564058] usb 4-2: USB disconnect, address 28
[ 1072.696017] usb 4-2: new low speed USB device using uhci_hcd and address 29
[ 1072.816015] usb 4-2: device descriptor read/64, error -71
[ 1073.040014] usb 4-2: device descriptor read/64, error -71
[ 1073.256020] usb 4-2: new low speed USB device using uhci_hcd and address 30
[ 1073.376012] usb 4-2: device descriptor read/64, error -71
[ 1073.600083] usb 4-2: device descriptor read/64, error -71
[ 1073.816023] usb 4-2: new low speed USB device using uhci_hcd and address 31
[ 1074.224014] usb 4-2: device not accepting address 31, error -71
[ 1074.336013] usb 4-2: new low speed USB device using uhci_hcd and address 32
[ 1074.744013] usb 4-2: device not accepting address 32, error -71
[ 1074.744030] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 1208.320012] usb 4-1: new low speed USB device using uhci_hcd and address 33
[ 1208.440010] usb 4-1: device descriptor read/64, error -71
[ 1208.664015] usb 4-1: device descriptor read/64, error -71
[ 1208.880018] usb 4-1: new low speed USB device using uhci_hcd and address 34
[ 1209.000195] usb 4-1: device descriptor read/64, error -71
[ 1209.224015] usb 4-1: device descriptor read/64, error -71
[ 1209.440011] usb 4-1: new low speed USB device using uhci_hcd and address 35
[ 1209.848011] usb 4-1: device not accepting address 35, error -71
[ 1209.960011] usb 4-1: new low speed USB device using uhci_hcd and address 36
[ 1210.372016] usb 4-1: device not accepting address 36, error -71
[ 1210.372041] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 1221.076011] usb 3-2: new low speed USB device using uhci_hcd and address 10
[ 1221.200011] usb 3-2: device descriptor read/64, error -71
[ 1221.424010] usb 3-2: device descriptor read/64, error -71
[ 1221.640012] usb 3-2: new low speed USB device using uhci_hcd and address 11
[ 1221.760010] usb 3-2: device descriptor read/64, error -71
[ 1221.984011] usb 3-2: device descriptor read/64, error -71
[ 1222.200016] usb 3-2: new low speed USB device using uhci_hcd and address 12
[ 1222.612012] usb 3-2: device not accepting address 12, error -71
[ 1222.724010] usb 3-2: new low speed USB device using uhci_hcd and address 13
[ 1223.132010] usb 3-2: device not accepting address 13, error -71
[ 1223.132026] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 1228.876013] usb 4-1: new low speed USB device using uhci_hcd and address 37
[ 1229.000185] usb 4-1: device descriptor read/64, error -71
[ 1229.224014] usb 4-1: device descriptor read/64, error -71
[ 1229.440010] usb 4-1: new low speed USB device using uhci_hcd and address 38
[ 1229.560011] usb 4-1: device descriptor read/64, error -71
[ 1229.788014] usb 4-1: device descriptor read/64, error -71
[ 1230.004017] usb 4-1: new low speed USB device using uhci_hcd and address 39
[ 1230.416013] usb 4-1: device not accepting address 39, error -71
[ 1230.528012] usb 4-1: new low speed USB device using uhci_hcd and address 40
[ 1230.936010] usb 4-1: device not accepting address 40, error -71
[ 1230.936025] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 1233.512015] usb 4-2: new low speed USB device using uhci_hcd and address 41
[ 1233.632025] usb 4-2: device descriptor read/64, error -71
[ 1233.856018] usb 4-2: device descriptor read/64, error -71
[ 1234.072013] usb 4-2: new low speed USB device using uhci_hcd and address 42
[ 1234.192009] usb 4-2: device descriptor read/64, error -71
[ 1234.416012] usb 4-2: device descriptor read/64, error -71
[ 1234.632013] usb 4-2: new low speed USB device using uhci_hcd and address 43
[ 1235.040009] usb 4-2: device not accepting address 43, error -71
[ 1235.152011] usb 4-2: new low speed USB device using uhci_hcd and address 44
[ 1235.560017] usb 4-2: device not accepting address 44, error -71
[ 1235.560038] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 1725.688024] usb 4-1: new low speed USB device using uhci_hcd and address 45
[ 1725.808020] usb 4-1: device descriptor read/64, error -71
[ 1726.032023] usb 4-1: device descriptor read/64, error -71
[ 1726.248035] usb 4-1: new low speed USB device using uhci_hcd and address 46
[ 1726.368081] usb 4-1: device descriptor read/64, error -71
[ 1726.592021] usb 4-1: device descriptor read/64, error -71
[ 1726.808020] usb 4-1: new low speed USB device using uhci_hcd and address 47
[ 1727.216019] usb 4-1: device not accepting address 47, error -71
[ 1727.336024] usb 4-1: new low speed USB device using uhci_hcd and address 48
[ 1727.744016] usb 4-1: device not accepting address 48, error -71
[ 1727.744038] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 1732.936024] usb 4-2: new low speed USB device using uhci_hcd and address 49
[ 1733.056025] usb 4-2: device descriptor read/64, error -71
[ 1733.280022] usb 4-2: device descriptor read/64, error -71
[ 1733.496023] usb 4-2: new low speed USB device using uhci_hcd and address 50
[ 1733.616030] usb 4-2: device descriptor read/64, error -71
[ 1733.840023] usb 4-2: device descriptor read/64, error -71
[ 1734.056046] usb 4-2: new low speed USB device using uhci_hcd and address 51
[ 1734.327262] usb 4-2: configuration #1 chosen from 1 choice
[ 1734.355720] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input12
[ 1734.355831] generic-usb 0003:045E:00A4.0005: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.2-2/input0
[ 1739.460027] usb 4-2: reset low speed USB device using uhci_hcd and address 51
[ 1739.728024] usb 4-2: device descriptor read/64, error -71
[ 1740.100023] usb 4-2: device descriptor read/64, error -71
[ 1740.464022] usb 4-2: reset low speed USB device using uhci_hcd and address 51
[ 1740.732020] usb 4-2: device descriptor read/64, error -71
[ 1741.108024] usb 4-2: device descriptor read/64, error -71
[ 1741.472023] usb 4-2: reset low speed USB device using uhci_hcd and address 51
[ 1741.880016] usb 4-2: device not accepting address 51, error -71
[ 1742.144028] usb 4-2: reset low speed USB device using uhci_hcd and address 51
[ 1744.580161] usb 4-2: reset low speed USB device using uhci_hcd and address 51
[ 1744.852023] usb 4-2: device descriptor read/64, error -71
[ 1745.224023] usb 4-2: device descriptor read/64, error -71
[ 1745.588022] usb 4-2: reset low speed USB device using uhci_hcd and address 51
[ 1745.856023] usb 4-2: device descriptor read/64, error -71
[ 1746.232023] usb 4-2: device descriptor read/64, error -71
[ 1746.596020] usb 4-2: reset low speed USB device using uhci_hcd and address 51
[ 1747.004014] usb 4-2: device not accepting address 51, error -71
[ 1747.264023] usb 4-2: reset low speed USB device using uhci_hcd and address 51
[ 1747.676016] usb 4-2: device not accepting address 51, error -71
[ 1747.676059] usb 4-2: USB disconnect, address 51
[ 1747.812025] usb 4-2: new low speed USB device using uhci_hcd and address 52
[ 1747.932022] usb 4-2: device descriptor read/64, error -71
[ 1748.156023] usb 4-2: device descriptor read/64, error -71
[ 1748.372025] usb 4-2: new low speed USB device using uhci_hcd and address 53
[ 1748.492023] usb 4-2: device descriptor read/64, error -71
[ 1748.724027] usb 4-2: device descriptor read/64, error -71
[ 1748.940024] usb 4-2: new low speed USB device using uhci_hcd and address 54
[ 1749.348017] usb 4-2: device not accepting address 54, error -71
[ 1749.460024] usb 4-2: new low speed USB device using uhci_hcd and address 55
[ 1749.868291] usb 4-2: device not accepting address 55, error -71
[ 1749.868314] hub 4-0:1.0: unable to enumerate USB device on port 2
Codice: Seleziona tutto
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

