[Risolto] [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
- bandaz
- Scoppiettante Seguace

- Messaggi: 275
- Iscrizione: lunedì 12 gennaio 2009, 19:31
- Località: Venezia
[Risolto] [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
grazie
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Codice: Seleziona tutto
cd /lib/firmwareCodice: Seleziona tutto
sudo wget http://www.wi-bw.tfh-wildau.de/~pboettch/home/files/dvb-usb-dib0700-1.20.fwBella scheda comunque, dual tuner...figo! Dovresti riuscire a vedere un canale e registrarne un altro contemporaneamente!
Kaffeine dovrebbe trovare due tuner...fammi sapere come si comporta
- bandaz
- Scoppiettante Seguace

- Messaggi: 275
- Iscrizione: lunedì 12 gennaio 2009, 19:31
- Località: Venezia
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
non riesco proprio a capire, e sembra che nella rete non ci siano informazioni! ???
ho cercato mezza giornata
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
http://hftom.free.fr/phpBB2/viewtopic.p ... 27ccb8c131
Per la mancanza di canali nella scansione, di solito (se l'antenna è ok) è un problema di firmware...
Probabilmente serve il firmare "più vecchio": dvb-usb-dib0700-01.fw
Lo installi con il pacchetto linux-firmware-nonfree:
Codice: Seleziona tutto
sudo apt-get install linux-firmware-nonfree[ 20.300000] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
[ 20.390000] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
[ 21.090000] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[ 21.090000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 21.090000] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T).
[ 21.230000] DVB: registering frontend 0 (DiBcom 3000MC/P)...
[ 21.850000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 21.850000] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T).
[ 24.600000] DVB: registering frontend 1 (DiBcom 3000MC/P)...
[ 24.787147] input: IR-receiver inside an USB DVB receiver as /class/input/input4
[ 25.240000] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
[ 25.240000] usbcore: registered new interface driver dvb_usb_dib0700
Qualche info sulla scheda: http://www.linuxtv.org/wiki/index.php/H ... NOVA-T-500
- bandaz
- Scoppiettante Seguace

- Messaggi: 275
- Iscrizione: lunedì 12 gennaio 2009, 19:31
- Località: Venezia
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Codice: Seleziona tutto
-desktop:~$ sudo apt-get install linux-firmware-nonfree
Lettura della lista dei pacchetti in corso... Fatto
Generazione dell'albero delle dipendenze in corso
Lettura informazioni sullo stato... Fatto
E: Impossibile trovare linux-firmware-nonfree
-desktop:~$ dmesg
zen
[ 1122.738975] ata2: irq_stat 0x00000040, connection status changed
[ 1122.738979] ata2: SError: { DevExch }
[ 1122.738986] ata2: hard resetting link
[ 1123.460039] ata2: SATA link down (SStatus 0 SControl 300)
[ 1123.460048] ata2: EH complete
[ 1126.407730] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1126.407735] ata2: irq_stat 0x00000040, connection status changed
[ 1126.407739] ata2: SError: { DevExch }
[ 1126.407746] ata2: hard resetting link
[ 1127.132032] ata2: SATA link down (SStatus 0 SControl 300)
[ 1127.132042] ata2: EH complete
[ 1127.359403] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1127.359408] ata2: irq_stat 0x00000040, connection status changed
[ 1127.359411] ata2: SError: { DevExch }
[ 1127.359419] ata2: hard resetting link
[ 1128.276034] ata2: SATA link down (SStatus 0 SControl 300)
[ 1128.276043] ata2: EH complete
[ 1128.339385] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1128.339390] ata2: irq_stat 0x00000040, connection status changed
[ 1128.339393] ata2: SError: { CommWake DevExch }
[ 1128.339400] ata2: hard resetting link
[ 1129.604047] ata2: SATA link down (SStatus 0 SControl 300)
[ 1129.604056] ata2: EH complete
[ 1129.855286] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1129.855291] ata2: irq_stat 0x00000040, connection status changed
[ 1129.855294] ata2: SError: { PHYInt CommWake DevExch }
[ 1129.855301] ata2: hard resetting link
[ 1130.577544] ata2: SATA link down (SStatus 0 SControl 300)
[ 1130.577553] ata2: EH complete
[ 1130.721125] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1130.721131] ata2: irq_stat 0x00000040, connection status changed
[ 1130.721135] ata2: SError: { DevExch }
[ 1130.721142] ata2: hard resetting link
[ 1131.992033] ata2: SATA link down (SStatus 0 SControl 300)
[ 1131.992042] ata2: EH complete
[ 1132.005945] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1132.005949] ata2: irq_stat 0x00000040, connection status changed
[ 1132.005953] ata2: SError: { CommWake DevExch }
[ 1132.005960] ata2: hard resetting link
[ 1132.732033] ata2: SATA link down (SStatus 0 SControl 300)
[ 1132.732042] ata2: EH complete
[ 1133.065052] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1133.065057] ata2: irq_stat 0x00000040, connection status changed
[ 1133.065060] ata2: SError: { DevExch }
[ 1133.065067] ata2: hard resetting link
[ 1135.452026] ata2: COMRESET failed (errno=-32)
[ 1135.452034] ata2: reset failed (errno=-32), retrying in 8 secs
[ 1143.065021] ata2: limiting SATA link speed to 1.5 Gbps
[ 1143.065026] ata2: hard resetting link
[ 1145.132046] ata2: SATA link down (SStatus 0 SControl 310)
[ 1145.132057] ata2: EH complete
[ 1145.597594] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1145.597599] ata2: irq_stat 0x00000040, connection status changed
[ 1145.597603] ata2: SError: { PHYInt CommWake DevExch }
[ 1145.597610] ata2: hard resetting link
[ 1146.672037] ata2: SATA link down (SStatus 0 SControl 300)
[ 1146.672046] ata2: EH complete
[ 1147.024831] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1147.024835] ata2: irq_stat 0x00000040, connection status changed
[ 1147.024839] ata2: SError: { DevExch }
[ 1147.024845] ata2: hard resetting link
[ 1147.749036] ata2: SATA link down (SStatus 0 SControl 300)
[ 1147.749045] ata2: EH complete
[ 1147.750927] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1147.750931] ata2: irq_stat 0x00000040, connection status changed
[ 1147.750935] ata2: SError: { CommWake DevExch }
[ 1147.750941] ata2: hard resetting link
[ 1148.664030] ata2: SATA link down (SStatus 0 SControl 300)
[ 1148.664039] ata2: EH complete
[ 1149.050463] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1149.050467] ata2: irq_stat 0x00000040, connection status changed
[ 1149.050471] ata2: SError: { DevExch }
[ 1149.050478] ata2: hard resetting link
[ 1151.500535] ata2: SATA link down (SStatus 0 SControl 300)
[ 1151.500544] ata2: EH complete
[ 1151.735197] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1151.735202] ata2: irq_stat 0x00000040, connection status changed
[ 1151.735206] ata2: SError: { PHYInt CommWake DevExch }
[ 1151.735214] ata2: hard resetting link
[ 1152.456031] ata2: SATA link down (SStatus 0 SControl 300)
[ 1152.456040] ata2: EH complete
[ 1152.854161] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1152.854166] ata2: irq_stat 0x00000040, connection status changed
[ 1152.854170] ata2: SError: { DevExch }
[ 1152.854176] ata2: hard resetting link
[ 1155.153040] ata2: SATA link down (SStatus 0 SControl 300)
[ 1155.153049] ata2: EH complete
[ 1155.512824] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1155.512829] ata2: irq_stat 0x00000040, connection status changed
[ 1155.512833] ata2: SError: { PHYInt CommWake DevExch }
[ 1155.512840] ata2: hard resetting link
[ 1157.132035] ata2: SATA link down (SStatus 0 SControl 300)
[ 1157.132044] ata2: EH complete
[ 1157.161340] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1157.161344] ata2: irq_stat 0x00000040, connection status changed
[ 1157.161347] ata2: SError: { DevExch }
[ 1157.161353] ata2: hard resetting link
[ 1157.884034] ata2: SATA link down (SStatus 0 SControl 300)
[ 1157.884043] ata2: EH complete
[ 1158.340713] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1158.340718] ata2: irq_stat 0x00000040, connection status changed
[ 1158.340721] ata2: SError: { CommWake DevExch }
[ 1158.340728] ata2: hard resetting link
[ 1159.256533] ata2: SATA link down (SStatus 0 SControl 300)
[ 1159.256543] ata2: EH complete
[ 1159.331043] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1159.331047] ata2: irq_stat 0x00000040, connection status changed
[ 1159.331051] ata2: SError: { DevExch }
[ 1159.331058] ata2: hard resetting link
[ 1160.052034] ata2: SATA link down (SStatus 0 SControl 300)
[ 1160.052044] ata2: EH complete
[ 1160.369642] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1160.369647] ata2: irq_stat 0x00000040, connection status changed
[ 1160.369650] ata2: SError: { DevExch }
[ 1160.369657] ata2: hard resetting link
[ 1161.092030] ata2: SATA link down (SStatus 0 SControl 300)
[ 1161.092039] ata2: EH complete
[ 1161.256382] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1161.256387] ata2: irq_stat 0x00000040, connection status changed
[ 1161.256391] ata2: SError: { DevExch }
[ 1161.256398] ata2: hard resetting link
[ 1162.300039] ata2: SATA link down (SStatus 0 SControl 300)
[ 1162.300049] ata2: EH complete
[ 1162.310767] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1162.310772] ata2: irq_stat 0x00000040, connection status changed
[ 1162.310776] ata2: SError: { PHYInt CommWake DevExch }
[ 1162.310782] ata2: hard resetting link
[ 1164.728020] ata2: COMRESET failed (errno=-32)
[ 1164.728028] ata2: reset failed (errno=-32), retrying in 8 secs
[ 1172.309020] ata2: limiting SATA link speed to 1.5 Gbps
[ 1172.309025] ata2: hard resetting link
[ 1173.032036] ata2: SATA link down (SStatus 0 SControl 310)
[ 1173.032046] ata2: EH complete
[ 1173.381857] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1173.381862] ata2: irq_stat 0x00000040, connection status changed
[ 1173.381865] ata2: SError: { CommWake DevExch }
[ 1173.381872] ata2: hard resetting link
[ 1175.624012] ata2: COMRESET failed (errno=-32)
[ 1175.624020] ata2: reset failed (errno=-32), retrying in 8 secs
[ 1183.380014] ata2: limiting SATA link speed to 1.5 Gbps
[ 1183.380019] ata2: hard resetting link
[ 1184.104039] ata2: SATA link down (SStatus 0 SControl 310)
[ 1184.104048] ata2: EH complete
[ 1184.105053] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1184.105057] ata2: irq_stat 0x00000040, connection status changed
[ 1184.105060] ata2: SError: { DevExch }
[ 1184.105066] ata2: hard resetting link
[ 1184.832033] ata2: SATA link down (SStatus 0 SControl 300)
[ 1184.832042] ata2: EH complete
[ 1184.972322] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1184.972327] ata2: irq_stat 0x00000040, connection status changed
[ 1184.972330] ata2: SError: { DevExch }
[ 1184.972337] ata2: hard resetting link
[ 1186.668032] ata2: SATA link down (SStatus 0 SControl 300)
[ 1186.668041] ata2: EH complete
[ 1186.695562] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1186.695567] ata2: irq_stat 0x00000040, connection status changed
[ 1186.695570] ata2: SError: { PHYInt CommWake DevExch }
[ 1186.695576] ata2: hard resetting link
[ 1189.304032] ata2: SATA link down (SStatus 0 SControl 300)
[ 1189.304041] ata2: EH complete
[ 1189.306030] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1189.306034] ata2: irq_stat 0x00000040, connection status changed
[ 1189.306038] ata2: SError: { PHYInt CommWake DevExch }
[ 1189.306044] ata2: hard resetting link
[ 1190.188537] ata2: SATA link down (SStatus 0 SControl 300)
[ 1190.188545] ata2: EH complete
[ 1190.275415] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1190.275420] ata2: irq_stat 0x00000040, connection status changed
[ 1190.275424] ata2: SError: { CommWake DevExch }
[ 1190.275430] ata2: hard resetting link
[ 1190.996032] ata2: SATA link down (SStatus 0 SControl 300)
[ 1190.996041] ata2: EH complete
[ 1190.996748] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1190.996751] ata2: irq_stat 0x00000040, connection status changed
[ 1190.996754] ata2: SError: { DevExch }
[ 1190.996761] ata2: hard resetting link
[ 1191.720030] ata2: SATA link down (SStatus 0 SControl 300)
[ 1191.720038] ata2: EH complete
[ 1191.722034] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1191.722038] ata2: irq_stat 0x00000040, connection status changed
[ 1191.722041] ata2: SError: { CommWake DevExch }
[ 1191.722047] ata2: hard resetting link
[ 1194.300016] ata2: COMRESET failed (errno=-32)
[ 1194.300024] ata2: reset failed (errno=-32), retrying in 8 secs
[ 1201.720019] ata2: limiting SATA link speed to 1.5 Gbps
[ 1201.720024] ata2: hard resetting link
[ 1203.084032] ata2: SATA link down (SStatus 0 SControl 310)
[ 1203.084042] ata2: EH complete
[ 1203.101885] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1203.101890] ata2: irq_stat 0x00000040, connection status changed
[ 1203.101894] ata2: SError: { PHYInt CommWake DevExch }
[ 1203.101901] ata2: hard resetting link
[ 1205.328016] ata2: COMRESET failed (errno=-32)
[ 1205.328024] ata2: reset failed (errno=-32), retrying in 8 secs
[ 1213.100026] ata2: limiting SATA link speed to 1.5 Gbps
[ 1213.100031] ata2: hard resetting link
[ 1214.148783] ata2: SATA link down (SStatus 0 SControl 310)
[ 1214.148791] ata2: EH complete
[ 1214.156398] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1214.156402] ata2: irq_stat 0x00000040, connection status changed
[ 1214.156406] ata2: SError: { PHYInt CommWake DevExch }
[ 1214.156412] ata2: hard resetting link
[ 1215.428029] ata2: SATA link down (SStatus 0 SControl 300)
[ 1215.428039] ata2: EH complete
[ 1215.506732] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1215.506736] ata2: irq_stat 0x00000040, connection status changed
[ 1215.506739] ata2: SError: { PHYInt CommWake DevExch }
[ 1215.506746] ata2: hard resetting link
[ 1216.240040] ata2: SATA link down (SStatus 0 SControl 300)
[ 1216.240048] ata2: EH complete
[ 1216.309559] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1216.309563] ata2: irq_stat 0x00000040, connection status changed
[ 1216.309567] ata2: SError: { CommWake DevExch }
[ 1216.309573] ata2: hard resetting link
[ 1217.704039] ata2: SATA link down (SStatus 0 SControl 300)
[ 1217.704049] ata2: EH complete
[ 1217.732221] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1217.732226] ata2: irq_stat 0x00000040, connection status changed
[ 1217.732229] ata2: SError: { DevExch }
[ 1217.732236] ata2: hard resetting link
[ 1218.876034] ata2: SATA link down (SStatus 0 SControl 300)
[ 1218.876043] ata2: EH complete
[ 1218.876088] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1218.876092] ata2: irq_stat 0x00000040, connection status changed
[ 1218.876096] ata2: SError: { CommWake DevExch }
[ 1218.876102] ata2: hard resetting link
[ 1220.144032] ata2: SATA link down (SStatus 0 SControl 300)
[ 1220.144041] ata2: EH complete
[ 1220.224614] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1220.224619] ata2: irq_stat 0x00000040, connection status changed
[ 1220.224623] ata2: SError: { PHYInt CommWake DevExch }
[ 1220.224629] ata2: hard resetting link
[ 1221.468032] ata2: SATA link down (SStatus 0 SControl 300)
[ 1221.468042] ata2: EH complete
[ 1221.486455] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1221.486459] ata2: irq_stat 0x00000040, connection status changed
[ 1221.486463] ata2: SError: { CommWake DevExch }
[ 1221.486470] ata2: hard resetting link
[ 1223.780013] ata2: COMRESET failed (errno=-32)
[ 1223.780021] ata2: reset failed (errno=-32), retrying in 8 secs
[ 1231.484018] ata2: limiting SATA link speed to 1.5 Gbps
[ 1231.484023] ata2: hard resetting link
[ 1233.556036] ata2: SATA link down (SStatus 0 SControl 310)
[ 1233.556045] ata2: EH complete
[ 1233.857618] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1233.857623] ata2: irq_stat 0x00000040, connection status changed
[ 1233.857627] ata2: SError: { PHYInt CommWake DevExch }
[ 1233.857634] ata2: hard resetting link
[ 1236.372031] ata2: SATA link down (SStatus 0 SControl 300)
[ 1236.372039] ata2: EH complete
[ 1236.376045] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1236.376049] ata2: irq_stat 0x00000040, connection status changed
[ 1236.376052] ata2: SError: { PHYInt CommWake DevExch }
[ 1236.376058] ata2: hard resetting link
[ 1237.292037] ata2: SATA link down (SStatus 0 SControl 300)
[ 1237.292045] ata2: EH complete
[ 1237.516270] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1237.516274] ata2: irq_stat 0x00000040, connection status changed
[ 1237.516278] ata2: SError: { DevExch }
[ 1237.516284] ata2: hard resetting link
[ 1238.464031] ata2: SATA link down (SStatus 0 SControl 300)
[ 1238.464039] ata2: EH complete
[ 1238.465475] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1238.465480] ata2: irq_stat 0x00000040, connection status changed
[ 1238.465483] ata2: SError: { DevExch }
[ 1238.465490] ata2: hard resetting link
[ 1239.288030] ata2: SATA link down (SStatus 0 SControl 300)
[ 1239.288040] ata2: EH complete
[ 1239.593395] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1239.593400] ata2: irq_stat 0x00000040, connection status changed
[ 1239.593404] ata2: SError: { DevExch }
[ 1239.593411] ata2: hard resetting link
[ 1240.316033] ata2: SATA link down (SStatus 0 SControl 300)
[ 1240.316043] ata2: EH complete
[ 1241.874432] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1241.874437] ata2: irq_stat 0x00000040, connection status changed
[ 1241.874440] ata2: SError: { DevExch }
[ 1241.874447] ata2: hard resetting link
[ 1242.596033] ata2: SATA link down (SStatus 0 SControl 300)
[ 1242.596042] ata2: EH complete
[ 1242.649248] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1242.649252] ata2: irq_stat 0x00000040, connection status changed
[ 1242.649256] ata2: SError: { DevExch }
[ 1242.649262] ata2: hard resetting link
[ 1243.372040] ata2: SATA link down (SStatus 0 SControl 300)
[ 1243.372049] ata2: EH complete
[ 1243.465480] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1243.465484] ata2: irq_stat 0x00000040, connection status changed
[ 1243.465488] ata2: SError: { DevExch }
[ 1243.465495] ata2: hard resetting link
[ 1244.192035] ata2: SATA link down (SStatus 0 SControl 300)
[ 1244.192045] ata2: EH complete
[ 1244.240640] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1244.240645] ata2: irq_stat 0x00000040, connection status changed
[ 1244.240648] ata2: SError: { DevExch }
[ 1244.240655] ata2: hard resetting link
[ 1245.476035] ata2: SATA link down (SStatus 0 SControl 300)
[ 1245.476044] ata2: EH complete
[ 1245.706729] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1245.706733] ata2: irq_stat 0x00000040, connection status changed
[ 1245.706737] ata2: SError: { PHYInt CommWake DevExch }
[ 1245.706744] ata2: hard resetting link
[ 1246.428035] ata2: SATA link down (SStatus 0 SControl 300)
[ 1246.428044] ata2: EH complete
[ 1246.536149] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1246.536154] ata2: irq_stat 0x00000040, connection status changed
[ 1246.536157] ata2: SError: { DevExch }
[ 1246.536164] ata2: hard resetting link
[ 1247.261532] ata2: SATA link down (SStatus 0 SControl 300)
[ 1247.261541] ata2: EH complete
[ 1247.332760] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1247.332764] ata2: irq_stat 0x00000040, connection status changed
[ 1247.332768] ata2: SError: { CommWake DevExch }
[ 1247.332775] ata2: hard resetting link
[ 1248.889531] ata2: SATA link down (SStatus 0 SControl 300)
[ 1248.889540] ata2: EH complete
[ 1249.106211] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1249.106216] ata2: irq_stat 0x00000040, connection status changed
[ 1249.106220] ata2: SError: { CommWake DevExch }
[ 1249.106226] ata2: hard resetting link
[ 1249.828031] ata2: SATA link down (SStatus 0 SControl 300)
[ 1249.828040] ata2: EH complete
[ 1251.481176] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1251.481181] ata2: irq_stat 0x00000040, connection status changed
[ 1251.481185] ata2: SError: { DevExch }
[ 1251.481191] ata2: hard resetting link
[ 1252.204532] ata2: SATA link down (SStatus 0 SControl 300)
[ 1252.204541] ata2: EH complete
[ 1252.468028] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1252.468033] ata2: irq_stat 0x00000040, connection status changed
[ 1252.468036] ata2: SError: { DevExch }
[ 1252.468043] ata2: hard resetting link
[ 1253.640032] ata2: SATA link down (SStatus 0 SControl 300)
[ 1253.640042] ata2: EH complete
[ 1253.692650] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1253.692654] ata2: irq_stat 0x00000040, connection status changed
[ 1253.692658] ata2: SError: { PHYInt CommWake DevExch }
[ 1253.692664] ata2: hard resetting link
[ 1256.152035] ata2: SATA link down (SStatus 0 SControl 300)
[ 1256.152043] ata2: EH complete
[ 1256.263642] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1256.263646] ata2: irq_stat 0x00000040, connection status changed
[ 1256.263648] ata2: SError: { PHYInt CommWake DevExch }
[ 1256.263653] ata2: hard resetting link
[ 1257.080035] ata2: SATA link down (SStatus 0 SControl 300)
[ 1257.080044] ata2: EH complete
[ 1257.081402] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1257.081406] ata2: irq_stat 0x00000040, connection status changed
[ 1257.081409] ata2: SError: { PHYInt CommWake DevExch }
[ 1257.081415] ata2: hard resetting link
[ 1258.705049] ata2: SATA link down (SStatus 0 SControl 300)
[ 1258.705059] ata2: EH complete
[ 1258.767464] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1258.767469] ata2: irq_stat 0x00000040, connection status changed
[ 1258.767473] ata2: SError: { PHYInt CommWake DevExch }
[ 1258.767479] ata2: hard resetting link
[ 1260.996017] ata2: COMRESET failed (errno=-32)
[ 1260.996025] ata2: reset failed (errno=-32), retrying in 8 secs
[ 1268.764017] ata2: limiting SATA link speed to 1.5 Gbps
[ 1268.764021] ata2: hard resetting link
[ 1269.557034] ata2: SATA link down (SStatus 0 SControl 310)
[ 1269.557043] ata2: EH complete
[ 1269.601065] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1269.601070] ata2: irq_stat 0x00000040, connection status changed
[ 1269.601074] ata2: SError: { PHYInt CommWake DevExch }
[ 1269.601081] ata2: hard resetting link
[ 1271.956016] ata2: COMRESET failed (errno=-32)
[ 1271.956024] ata2: reset failed (errno=-32), retrying in 8 secs
[ 1279.600014] ata2: limiting SATA link speed to 1.5 Gbps
[ 1279.600018] ata2: hard resetting link
[ 1281.868013] ata2: COMRESET failed (errno=-32)
[ 1281.868021] ata2: reset failed (errno=-32), retrying in 8 secs
[ 1289.604016] ata2: hard resetting link
[ 1290.328073] ata2: SATA link down (SStatus 0 SControl 310)
[ 1290.328082] ata2: EH complete
[ 1290.360665] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1290.360670] ata2: irq_stat 0x00000040, connection status changed
[ 1290.360673] ata2: SError: { PHYInt CommWake DevExch }
[ 1290.360680] ata2: hard resetting link
[ 1292.908104] ata2: SATA link down (SStatus 0 SControl 300)
[ 1292.908113] ata2: EH complete
[ 1292.954594] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1292.954599] ata2: irq_stat 0x00000040, connection status changed
[ 1292.954603] ata2: SError: { PHYInt CommWake DevExch }
[ 1292.954609] ata2: hard resetting link
[ 1294.636035] ata2: SATA link down (SStatus 0 SControl 300)
[ 1294.636044] ata2: EH complete
[ 1294.636675] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1294.636679] ata2: irq_stat 0x00000040, connection status changed
[ 1294.636683] ata2: SError: { CommWake DevExch }
[ 1294.636690] ata2: hard resetting link
[ 1296.928018] ata2: COMRESET failed (errno=-32)
[ 1296.928026] ata2: reset failed (errno=-32), retrying in 8 secs
[ 1304.637016] ata2: limiting SATA link speed to 1.5 Gbps
[ 1304.637019] ata2: hard resetting link
[ 1305.361057] ata2: SATA link down (SStatus 0 SControl 310)
[ 1305.361066] ata2: EH complete
[ 1305.692121] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1305.692126] ata2: irq_stat 0x00000040, connection status changed
[ 1305.692129] ata2: SError: { DevExch }
[ 1305.692137] ata2: hard resetting link
[ 1306.516031] ata2: SATA link down (SStatus 0 SControl 300)
[ 1306.516040] ata2: EH complete
[ 1307.267501] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1307.267506] ata2: irq_stat 0x00000040, connection status changed
[ 1307.267509] ata2: SError: { DevExch }
[ 1307.267516] ata2: hard resetting link
[ 1308.244040] ata2: SATA link down (SStatus 0 SControl 300)
[ 1308.244050] ata2: EH complete
[ 1308.414866] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1308.414871] ata2: irq_stat 0x00000040, connection status changed
[ 1308.414874] ata2: SError: { DevExch }
[ 1308.414881] ata2: hard resetting link
[ 1309.140034] ata2: SATA link down (SStatus 0 SControl 300)
[ 1309.140044] ata2: EH complete
[ 1309.144575] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1309.144579] ata2: irq_stat 0x00000040, connection status changed
[ 1309.144583] ata2: SError: { DevExch }
[ 1309.144589] ata2: hard resetting link
[ 1310.832069] ata2: SATA link down (SStatus 0 SControl 300)
[ 1310.832078] ata2: EH complete
[ 1310.838131] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 1310.838135] ata2: irq_stat 0x00000040, connection status changed
[ 1310.838139] ata2: SError: { DevExch }
[ 1310.838145] ata2: hard resetting link
[ 1312.200033] ata2: SATA link down (SStatus 0 SControl 300)
[ 1312.200043] ata2: EH complete
[ 1312.217013] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
[ 1312.217018] ata2: irq_stat 0x00000040, connection status changed
[ 1312.217021] ata2: SError: { PHYInt CommWake DevExch }
[ 1312.217029] ata2: hard resetting link
[ 1312.941037] ata2: SATA link down (SStatus 0 SControl 300)
[ 1312.941046] ata2: EH complete
[ 1312.969496] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 1312.969500] ata2: irq_stat 0x00000040, connection status changed
[ 1312.969504] ata2: SError: { CommWake DevExch }
[ 1312.969511] ata2: hard resetting link
[ 1315.187605] ata2: COMRESET failed (errno=-32)
[ 1315.187613] ata2: reset failed (errno=-32), retrying in 8 secs
[ 1322.968021] ata2: limiting SATA link speed to 1.5 Gbps
[ 1322.968026] ata2: hard resetting link
[ 1325.196016] ata2: COMRESET failed (errno=-32)
[ 1325.196024] ata2: reset failed (errno=-32), retrying in 8 secsRe: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
I risultati dei comandi per cortesia selezionali e poi premi il tag "code" (pulsante con "#" sopra a dove scrivi) altrimenti invadi tutto il forum
ridai il comando così:
Codice: Seleziona tutto
dmesg | grep firmware- bandaz
- Scoppiettante Seguace

- Messaggi: 275
- Iscrizione: lunedì 12 gennaio 2009, 19:31
- Località: Venezia
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
cosa sono i repository multiverse
in più vorrei capire quel comando che mi hai indicato a che punto dovrei farlo!
Inoltre disabilitando il client dvb da caffeine ora non vedo più l'icona del digitale terrestre!
HElp Help
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Vai su: Sistema>Amministrazione>Gestore pacchetti>Impostazioni>Repository>Software per Ubuntu e controlla che sia selezionato "Software con restrizioni per copyright o motivi legali (multiverse)"bandaz ha scritto: Scusami, ma non ho esperienza nel campo!
cosa sono i repository multiverse
Apri il terminale e copia/incolla il comando...quando vuoi te dai "enter"bandaz ha scritto: in più vorrei capire quel comando che mi hai indicato a che punto dovrei farlo!
Probabilmente è giusto così perchè la scheda non è perfettamente configurata. Forse prima avevi l'icona perchè avevi configurato per vedere la tv in streaming da un altro pcbandaz ha scritto: Inoltre disabilitando il client dvb da caffeine ora non vedo più l'icona del digitale terrestre!
Posta il comando che ti ho chiesto e, visto che ci sei, anche:
Codice: Seleziona tutto
lspci | grep Multimedia- bandaz
- Scoppiettante Seguace

- Messaggi: 275
- Iscrizione: lunedì 12 gennaio 2009, 19:31
- Località: Venezia
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
E seguendo le tue istruzioni passo passo ho provato a fare l'aggiornamento del firmware ma inutilmente, non trovo nessun canale!
ora però non mi dà nessun tipo di errore, e mi fa entrare dall'ivcona tv digitale. quindi è ok? o penso
Per i canali non capisco perciò ti posto quello che è uscito con il comando dmesg:
Codice: Seleziona tutto
[ 0.688618] Switched to high resolution mode on CPU 1
[ 0.689200] Switched to high resolution mode on CPU 2
[ 0.689222] Switched to high resolution mode on CPU 3
[ 0.692056] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.692068] system 00:07: ioport range 0x290-0x297 has been reserved
[ 0.692079] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.692083] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.692086] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.692090] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.692094] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.692098] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.692102] system 00:08: iomem range 0xffa00000-0xffafffff has been reserved
[ 0.692106] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.692110] system 00:08: iomem range 0xffe00000-0xffefffff could not be reserved
[ 0.692114] system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved
[ 0.692123] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.692127] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.692135] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.692142] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.692146] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.692150] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.692153] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.727417] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.727420] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.727423] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe8fffff
[ 0.727426] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.727430] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.727431] pci 0000:00:1c.0: IO window: disabled
[ 0.727435] pci 0000:00:1c.0: MEM window: disabled
[ 0.727439] pci 0000:00:1c.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
[ 0.727444] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.727447] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.727451] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.727454] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.727459] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.727462] pci 0000:00:1c.5: IO window: 0xc000-0xcfff
[ 0.727466] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
[ 0.727470] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.727475] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.727477] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.727482] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.727485] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.727495] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.727499] pci 0000:00:01.0: setting latency timer to 64
[ 0.727505] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.727509] pci 0000:00:1c.0: setting latency timer to 64
[ 0.727515] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.727519] pci 0000:00:1c.4: setting latency timer to 64
[ 0.727524] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.727528] pci 0000:00:1c.5: setting latency timer to 64
[ 0.727534] pci 0000:00:1e.0: setting latency timer to 64
[ 0.727537] bus: 00 index 0 io port: [0, ffff]
[ 0.727538] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.727540] bus: 01 index 0 io port: [b000, bfff]
[ 0.727542] bus: 01 index 1 mmio: [fa000000, fe8fffff]
[ 0.727544] bus: 01 index 2 mmio: [d0000000, dfffffff]
[ 0.727546] bus: 01 index 3 mmio: [0, 0]
[ 0.727547] bus: 04 index 0 mmio: [0, 0]
[ 0.727549] bus: 04 index 1 mmio: [0, 0]
[ 0.727551] bus: 04 index 2 mmio: [f8f00000, f8ffffff]
[ 0.727552] bus: 04 index 3 mmio: [0, 0]
[ 0.727554] bus: 03 index 0 io port: [d000, dfff]
[ 0.727556] bus: 03 index 1 mmio: [fea00000, feafffff]
[ 0.727558] bus: 03 index 2 mmio: [0, 0]
[ 0.727559] bus: 03 index 3 mmio: [0, 0]
[ 0.727561] bus: 02 index 0 io port: [c000, cfff]
[ 0.727563] bus: 02 index 1 mmio: [fe900000, fe9fffff]
[ 0.727564] bus: 02 index 2 mmio: [0, 0]
[ 0.727566] bus: 02 index 3 mmio: [0, 0]
[ 0.727568] bus: 05 index 0 io port: [e000, efff]
[ 0.727570] bus: 05 index 1 mmio: [feb00000, febfffff]
[ 0.727571] bus: 05 index 2 mmio: [0, 0]
[ 0.727573] bus: 05 index 3 io port: [0, ffff]
[ 0.727575] bus: 05 index 4 mmio: [0, ffffffff]
[ 0.727581] NET: Registered protocol family 2
[ 0.740072] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.740291] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.740540] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.740666] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.740668] TCP reno registered
[ 0.744088] NET: Registered protocol family 1
[ 0.744203] checking if image is initramfs... it is
[ 1.310226] Freeing initrd memory: 7998k freed
[ 1.311675] audit: initializing netlink socket (disabled)
[ 1.311689] type=2000 audit(1269396850.309:1): initialized
[ 1.315953] highmem bounce pool size: 64 pages
[ 1.315960] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.317837] VFS: Disk quotas dquot_6.5.1
[ 1.317940] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.318054] msgmni has been set to 1743
[ 1.318192] io scheduler noop registered
[ 1.318195] io scheduler anticipatory registered
[ 1.318197] io scheduler deadline registered
[ 1.318206] io scheduler cfq registered (default)
[ 1.318347] pci 0000:01:00.0: Boot video device
[ 1.318493] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.318522] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.318546] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.318579] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.318646] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.318675] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.318703] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.318737] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.318768] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.318841] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.318870] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.318898] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 1.318930] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 1.318961] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 1.319032] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.319061] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.319089] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.319120] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 1.319151] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.319408] isapnp: Scanning for PnP cards...
[ 1.672270] isapnp: No Plug & Play device found
[ 1.709236] hpet_resources: 0xfed00000 is busy
[ 1.709322] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.709427] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.710001] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.711336] brd: module loaded
[ 1.711389] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.711479] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.711481] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.712000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.713666] mice: PS/2 mouse device common for all mice
[ 1.713825] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.713849] rtc0: alarms up to one month, y3k, hpet irqs
[ 1.714010] EISA: Probing bus 0 at eisa.0
[ 1.714036] Cannot allocate resource for EISA slot 8
[ 1.714038] EISA: Detected 0 cards.
[ 1.714042] cpuidle: using governor ladder
[ 1.714045] cpuidle: using governor menu
[ 1.714620] TCP cubic registered
[ 1.714640] Using IPI No-Shortcut mode
[ 1.714849] registered taskstats version 1
[ 1.715016] Magic number: 2:162:208
[ 1.715031] tty ttyt6: hash matches
[ 1.715055] vc vcsa: hash matches
[ 1.715104] rtc_cmos 00:03: setting system clock to 2010-03-24 02:14:11 UTC (1269396851)
[ 1.715106] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.715108] EDD information not available.
[ 1.715255] Freeing unused kernel memory: 428k freed
[ 1.715295] Write protecting the kernel text: 2584k
[ 1.715321] Write protecting the kernel read-only data: 940k
[ 1.839205] fuse init (API version 7.9)
[ 1.857779] ACPI: SSDT 7FF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113)
[ 1.858150] processor ACPI0007:00: registered as cooling_device0
[ 1.858390] ACPI: SSDT 7FF8E2B0, 0143 (r1 AMI CPU2PM 1 INTL 20060113)
[ 1.858734] processor ACPI0007:01: registered as cooling_device1
[ 1.858970] ACPI: SSDT 7FF8E400, 0143 (r1 AMI CPU3PM 1 INTL 20060113)
[ 1.859315] processor ACPI0007:02: registered as cooling_device2
[ 1.859551] ACPI: SSDT 7FF8E550, 0143 (r1 AMI CPU4PM 1 INTL 20060113)
[ 1.859897] processor ACPI0007:03: registered as cooling_device3
[ 1.953187] usbcore: registered new interface driver usbfs
[ 1.953204] usbcore: registered new interface driver hub
[ 1.958814] usbcore: registered new device driver usb
[ 1.960702] USB Universal Host Controller Interface driver v3.0
[ 1.960738] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.960747] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.960751] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.960782] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.960814] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 1.960923] usb usb1: configuration #1 chosen from 1 choice
[ 1.960947] hub 1-0:1.0: USB hub found
[ 1.960952] hub 1-0:1.0: 2 ports detected
[ 2.013948] Floppy drive(s): fd0 is 1.44M
[ 2.021133] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.026505] No dock devices found.
[ 2.032792] FDC 0 is a post-1991 82077
[ 2.045877] SCSI subsystem initialized
[ 2.065694] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.065703] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.065707] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.065728] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 2.065761] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 2.065836] usb usb2: configuration #1 chosen from 1 choice
[ 2.065859] hub 2-0:1.0: USB hub found
[ 2.065864] hub 2-0:1.0: 2 ports detected
[ 2.066322] libata version 3.00 loaded.
[ 2.279531] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.279540] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.279543] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.279568] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 2.279597] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[ 2.279689] usb usb3: configuration #1 chosen from 1 choice
[ 2.279711] hub 3-0:1.0: USB hub found
[ 2.279722] hub 3-0:1.0: 2 ports detected
[ 2.380323] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.380334] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.380338] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.380358] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[ 2.384257] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.384262] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.384268] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 2.389021] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 2.400032] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.400130] usb usb4: configuration #1 chosen from 1 choice
[ 2.400164] hub 4-0:1.0: USB hub found
[ 2.400171] hub 4-0:1.0: 6 ports detected
[ 2.456058] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 2.608462] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.608470] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.608474] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.608510] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.608540] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 2.608640] usb usb5: configuration #1 chosen from 1 choice
[ 2.608672] hub 5-0:1.0: USB hub found
[ 2.608679] hub 5-0:1.0: 2 ports detected
[ 2.712435] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.712440] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.712443] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.712463] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.712492] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 2.712558] usb usb6: configuration #1 chosen from 1 choice
[ 2.712580] hub 6-0:1.0: USB hub found
[ 2.712585] hub 6-0:1.0: 2 ports detected
[ 2.720021] usb 4-3: new high speed USB device using ehci_hcd and address 2
[ 2.858577] usb 4-3: configuration #1 chosen from 1 choice
[ 2.920506] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.920512] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.920515] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.920536] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.920561] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 2.920629] usb usb7: configuration #1 chosen from 1 choice
[ 2.920651] hub 7-0:1.0: USB hub found
[ 2.920656] hub 7-0:1.0: 2 ports detected
[ 3.032023] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 3.128643] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.128651] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.128654] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.128675] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 3.132564] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.132569] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.132573] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 3.157532] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.157621] usb usb8: configuration #1 chosen from 1 choice
[ 3.157654] hub 8-0:1.0: USB hub found
[ 3.157662] hub 8-0:1.0: 6 ports detected
[ 3.364679] uhci_hcd 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.364687] uhci_hcd 0000:05:01.0: UHCI Host Controller
[ 3.364718] uhci_hcd 0000:05:01.0: new USB bus registered, assigned bus number 9
[ 3.364747] uhci_hcd 0000:05:01.0: irq 17, io base 0x0000e880
[ 3.364844] usb usb9: configuration #1 chosen from 1 choice
[ 3.364876] hub 9-0:1.0: USB hub found
[ 3.364884] hub 9-0:1.0: 2 ports detected
[ 3.365648] ata_piix 0000:00:1f.2: version 2.12
[ 3.365665] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 3.365670] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.365715] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.365784] scsi0 : ata_piix
[ 3.366390] scsi1 : ata_piix
[ 3.367634] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 22
[ 3.367638] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 22
[ 3.556045] usb 6-1: device not accepting address 2, error -71
[ 3.572158] uhci_hcd 0000:05:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 3.572167] uhci_hcd 0000:05:01.1: UHCI Host Controller
[ 3.572195] uhci_hcd 0000:05:01.1: new USB bus registered, assigned bus number 10
[ 3.572215] uhci_hcd 0000:05:01.1: irq 18, io base 0x0000ec00
[ 3.572282] usb usb10: configuration #1 chosen from 1 choice
[ 3.572304] hub 10-0:1.0: USB hub found
[ 3.572309] hub 10-0:1.0: 2 ports detected
[ 3.612045] hub 6-0:1.0: unable to enumerate USB device on port 1
[ 3.844082] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.874303] ata1.00: ATA-7: WDC WD5000AAJS-22TKA0, 12.01C01, max UDMA/133
[ 3.874307] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.888757] ata1.00: configured for UDMA/133
[ 4.108024] usb 8-3: new high speed USB device using ehci_hcd and address 2
[ 4.218635] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.218739] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAJS-2 12.0 PQ: 0 ANSI: 5
[ 4.218850] ehci_hcd 0000:05:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 4.218867] ehci_hcd 0000:05:01.2: EHCI Host Controller
[ 4.218893] ehci_hcd 0000:05:01.2: new USB bus registered, assigned bus number 11
[ 4.218924] ehci_hcd 0000:05:01.2: irq 19, io mem 0xfebffc00
[ 4.219287] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 4.219292] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.219324] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 4.219361] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 4.219364] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.219372] scsi2 : pata_jmicron
[ 4.219632] scsi3 : pata_jmicron
[ 4.220390] ata3: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 4.220392] ata4: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 4.220667] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.220701] scsi4 : ata_piix
[ 4.220991] scsi5 : ata_piix
[ 4.222187] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[ 4.222191] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[ 4.233522] ehci_hcd 0000:05:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.233644] usb usb11: configuration #1 chosen from 1 choice
[ 4.233688] hub 11-0:1.0: USB hub found
[ 4.233694] hub 11-0:1.0: 4 ports detected
[ 4.241217] usb 8-3: configuration #1 chosen from 1 choice
[ 4.544930] ahci 0000:03:00.0: version 3.0
[ 4.544945] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.560069] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 4.560073] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 4.560081] ahci 0000:03:00.0: setting latency timer to 64
[ 4.560211] scsi6 : ahci
[ 4.560472] scsi7 : ahci
[ 4.560538] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 4.560542] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[ 4.700054] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.704070] usb 6-2: new low speed USB device using uhci_hcd and address 4
[ 4.708206] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100
[ 4.724207] ata5.00: configured for UDMA/100
[ 4.878635] usb 6-2: configuration #1 chosen from 1 choice
[ 4.881556] ata7: SATA link down (SStatus 0 SControl 300)
[ 5.008061] usbcore: registered new interface driver hiddev
[ 5.054601] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.059005] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5
[ 5.216036] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.232091] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.232104] sky2 0000:02:00.0: setting latency timer to 64
[ 5.232124] sky2 0000:02:00.0: v1.22 addr 0xfe9fc000 irq 17 Yukon-2 EC Ultra rev 2
[ 5.232469] sky2 eth0: addr 00:1b:fc:c2:cc:dd
[ 5.232993] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.284700] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febfe000-febfe7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 5.291695] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 5.292014] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.292047] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 5.308709] Driver 'sd' needs updating - please use bus_type methods
[ 5.308782] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 5.308795] sd 0:0:0:0: [sda] Write Protect is off
[ 5.308797] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.308817] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.308870] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 5.308881] sd 0:0:0:0: [sda] Write Protect is off
[ 5.308884] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.308904] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.308907] sda: sda1 sda2 sda3 sda4 <<4>Driver 'sr' needs updating - please use bus_type methods
[ 5.321824] sda5 >
[ 5.332765] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.471713] usb 7-1: configuration #1 chosen from 1 choice
[ 5.557152] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.557157] Uniform CD-ROM driver Revision: 3.20
[ 5.557258] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 5.712025] usb 7-2: new full speed USB device using uhci_hcd and address 3
[ 5.881709] usb 7-2: configuration #1 chosen from 1 choice
[ 5.884664] hub 7-2:1.0: USB hub found
[ 5.886612] hub 7-2:1.0: 4 ports detected
[ 6.216018] usb 11-1: new high speed USB device using ehci_hcd and address 2
[ 6.349151] usb 11-1: configuration #1 chosen from 1 choice
[ 6.366831] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input1
[ 6.369622] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2
[ 6.383880] input: Device USB Device as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input2
[ 6.388076] input,hidraw1: USB HID v1.00 Keyboard [Device USB Device] on usb-0000:00:1d.2-1
[ 6.415975] input: Device USB Device as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.1/input/input3
[ 6.425116] input,hidraw2: USB HID v1.00 Mouse [Device USB Device] on usb-0000:00:1d.2-1
[ 6.426618] usb 7-2.3: new low speed USB device using uhci_hcd and address 4
[ 6.561647] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800015c369c]
[ 6.564696] usb 7-2.3: configuration #1 chosen from 1 choice
[ 6.596676] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input4
[ 6.596726] input,hidraw3: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.2-2.3
[ 6.596747] usbcore: registered new interface driver usbhid
[ 6.596750] usbhid: v2.6:USB HID core driver
[ 6.661593] PM: Starting manual resume from disk
[ 6.661596] PM: Resume from partition 8:2
[ 6.661597] PM: Checking hibernation image.
[ 6.661766] PM: Resume from disk failed.
[ 6.692436] kjournald starting. Commit interval 5 seconds
[ 6.692454] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.351642] udevd version 124 started
[ 11.559126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.622250] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.636865] Linux agpgart interface v0.103
[ 11.814591] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 11.832518] ACPI: Power Button (FF) [PWRF]
[ 11.832634] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[ 11.864518] ACPI: Power Button (CM) [PWRB]
[ 12.092819] nvidia: module license 'NVIDIA' taints kernel.
[ 12.352313] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.352325] nvidia 0000:01:00.0: setting latency timer to 64
[ 12.352477] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.11 Wed Nov 26 10:53:26 PST 2008
[ 12.355805] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 12.420403] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5B11
[ 12.420428] usbcore: registered new interface driver usblp
[ 12.487825] iTCO_vendor_support: vendor-support=0
[ 12.521654] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 12.521734] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 12.521809] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.632335] dib0700: loaded with support for 7 different device-types
[ 12.804431] phy0: Selected rate control algorithm 'pid'
[ 13.046721] phy0: hwaddr 00:15:af:1a:3c:d3, RTL8187vB (default) V1 + rtl8225z2
[ 13.046896] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[ 13.046927] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.047079] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 13.067573] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.067589] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.157917] DVB: registering frontend 0 (DiBcom 3000MC/P)...
[ 13.188674] MT2060: successfully identified (IF1 = 1215)
[ 13.671374] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.671554] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 13.677625] DVB: registering frontend 1 (DiBcom 3000MC/P)...
[ 13.682625] MT2060: successfully identified (IF1 = 1216)
[ 14.241449] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:05:01.2/usb11/11-1/input/input8
[ 14.249102] dvb-usb: schedule remote query interval to 150 msecs.
[ 14.249105] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
[ 14.249376] usbcore: registered new interface driver rtl8187
[ 14.249379] usbcore: registered new interface driver dvb_usb_dib0700
[ 15.382416] lp: driver loaded but no devices found
[ 15.478435] Adding 1461904k swap on /dev/sda2. Priority:-1 extents:1 across:1461904k
[ 16.015821] EXT3 FS on sda3, internal journal
[ 16.921723] type=1505 audit(1269393266.653:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4777
[ 17.053773] type=1505 audit(1269393266.786:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4782
[ 17.053914] type=1505 audit(1269393266.786:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4782
[ 17.191181] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.229002] sky2 eth0: enabling interface
[ 17.427644] PPP generic driver version 2.4.2
[ 17.448143] NET: Registered protocol family 17
[ 17.492913] NET: Registered protocol family 10
[ 17.493578] lo: Disabled Privacy Extensions
[ 17.494023] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.961099] ACPI: WMI: Mapper loaded
[ 18.613670] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 18.677479] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 18.677484] apm: disabled - APM is not SMP safe.
[ 18.775006] ppdev: user-space parallel port driver
[ 19.114229] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 19.114376] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.360352] Bluetooth: Core ver 2.13
[ 21.360854] NET: Registered protocol family 31
[ 21.360859] Bluetooth: HCI device and connection manager initialized
[ 21.360862] Bluetooth: HCI socket layer initialized
[ 21.396975] Bluetooth: L2CAP ver 2.11
[ 21.396980] Bluetooth: L2CAP socket layer initialized
[ 21.417611] Bluetooth: SCO (Voice Link) ver 0.6
[ 21.417617] Bluetooth: SCO socket layer initialized
[ 21.435295] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.435303] Bluetooth: BNEP filters: protocol multicast
[ 21.470036] Bridge firewalling registered
[ 21.593581] Bluetooth: RFCOMM socket layer initialized
[ 21.593594] Bluetooth: RFCOMM TTY layer initialized
[ 21.593596] Bluetooth: RFCOMM ver 1.10
[ 22.568687] NET: Registered protocol family 24
[ 29.916006] eth0: no IPv6 routers present
[ 34.414130] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 511.961983] DVB: frontend 1 frequency 866000000 out of range (48000000..860000000)
[ 512.603115] DVB: frontend 1 frequency 874000000 out of range (48000000..860000000)
[ 513.103494] DVB: frontend 1 frequency 882000000 out of range (48000000..860000000)
[ 513.603863] DVB: frontend 1 frequency 890000000 out of range (48000000..860000000)
[ 514.104221] DVB: frontend 1 frequency 898000000 out of range (48000000..860000000)ah, quasi dimenticavo, su Sistema>Amministrazione>gestione pacchetti synaptic>Impostazioni non trovo la voce Repository!
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Se dai questo comando sul terminale:
Codice: Seleziona tutto
lsusb2040:9941
2040:9950
Quindi, come avevo ipotizzato all'inizio, ti serve il firmware dvb-usb-dib0700-1.20.fw ...che dovresti aver già messo in /lib/firmware.
Infatti a pennetta sembra riconosciuta e anche tutti e due i tuners (frontend0 e frontend1):
Ci sono però dei problemi con la scansione delle frequenze perchè sembra che il tuner non riceva frequenze superiori agli 860Mhz:bandaz ha scritto: ...quello che è uscito con il comando dmesg:Codice: Seleziona tutto
[ 12.632335] dib0700: loaded with support for 7 different device-types [ 13.046896] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 13.046927] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 13.047079] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 13.067573] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 13.067589] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.157917] DVB: registering frontend 0 (DiBcom 3000MC/P)... [ 13.188674] MT2060: successfully identified (IF1 = 1215) [ 13.671374] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 13.671554] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 13.677625] DVB: registering frontend 1 (DiBcom 3000MC/P)... [ 13.682625] MT2060: successfully identified (IF1 = 1216) [ 14.241449] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:05:01.2/usb11/11-1/input/input8 [ 14.249102] dvb-usb: schedule remote query interval to 150 msecs. [ 14.249105] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 14.249376] usbcore: registered new interface driver rtl8187 [ 14.249379] usbcore: registered new interface driver dvb_usb_dib0700
Codice: Seleziona tutto
[ 511.961983] DVB: frontend 1 frequency 866000000 out of range (48000000..860000000)
[ 512.603115] DVB: frontend 1 frequency 874000000 out of range (48000000..860000000)
[ 513.103494] DVB: frontend 1 frequency 882000000 out of range (48000000..860000000)
[ 513.603863] DVB: frontend 1 frequency 890000000 out of range (48000000..860000000)
[ 514.104221] DVB: frontend 1 frequency 898000000 out of range (48000000..860000000)70 862 870 863,25 867,68 868,75 866 UHF fuori banda 5 raramente utilizzato in Italia
71 870 878 871,25 875,68 876,75 874 UHF fuori banda 5 non più utilizzato in Italia
72 878 886 879,25 883,68 884,75 882 UHF fuori banda 5 non più utilizzato in Italia
73 886 894 887,25 891,68 892,75 890 UHF fuori banda 5 non più utilizzato in Italia
74 894 902 895,25 899,68 900,75 898 UHF fuori banda 5 non più utilizzato in Italia
Il vecchio sistema di winzozz non si scorda maibandaz ha scritto: Ciao, volevo avvisarti che con tutti i casini che ho combinato...... ho deciso di formattare e reinstallare il tutto!
Hai fatto così: http://forum.ubuntu-it.org/viewtopic.ph ... 0#p2704760 ?bandaz ha scritto: E seguendo le tue istruzioni passo passo ho provato a fare l'aggiornamento del firmware ma inutilmente, non trovo nessun canale!
ora però non mi dà nessun tipo di errore, e mi fa entrare dall'ivcona tv digitale. quindi è ok? o penso
Per la versione 0.8.8: http://forum.ubuntu-it.org/viewtopic.ph ... 9#p2790059
- bandaz
- Scoppiettante Seguace

- Messaggi: 275
- Iscrizione: lunedì 12 gennaio 2009, 19:31
- Località: Venezia
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Effettivamente anche nella guida della pci riportano che devono uscire questi messaggi:
[ 20.300000] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
[ 20.390000] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
[ 21.090000] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[ 21.090000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Anche perchè sono andato a verificare e, effettivamente, una Nova-T 500 Dual DVB-T/USB esiste!
Ed è questo che mi ha tratto in inganno...
Quindi...a questo punto, mi posti il risultato del comando:
Codice: Seleziona tutto
lspci- bandaz
- Scoppiettante Seguace

- Messaggi: 275
- Iscrizione: lunedì 12 gennaio 2009, 19:31
- Località: Venezia
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Codice: Seleziona tutto
-desktop:~$ sudo pppoeconf
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
bandaz@bandaz-desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 9800 GTX (rev a2)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
05:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
05:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
05:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
05:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)
-desktop:~$ Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Tanto per avere la controprova: posta anche
Codice: Seleziona tutto
lsusb- bandaz
- Scoppiettante Seguace

- Messaggi: 275
- Iscrizione: lunedì 12 gennaio 2009, 19:31
- Località: Venezia
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
svuoi che non sia sicuro!!!
cmq ecco quì:
Codice: Seleziona tutto
-desktop:~$ lsusb
Bus 003 Device 002: ID 2040:9950 Hauppauge
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:5b11 Hewlett-Packard Officejet J2100 Series
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 004: ID 046d:c218 Logitech, Inc. Logitech RumblePad 2 USB
Bus 009 Device 003: ID 058f:9254 Alcor Micro Corp. Hub
Bus 009 Device 002: ID 05fe:1010 Chic Technology Corp. Optical Wireless
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 002: ID 046d:c50d Logitech, Inc. Cordless Mouse
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Si, si...non volevo di certo mettere in dubbio quello che hai detto!bandaz ha scritto: bhe, l'ho installata personalmente io dentro il case del pc!!!!
svuoi che non sia sicuro!!!
Volevo solo sincerarmi che la tua scheda viene vista dal sistema come una periferica usb anche se è a tutti gli effetti una scheda pci ::)
Questi "geni" della Hauppauge hanno in pratica messo la scheda usb all'interno di una pci ???
Infatti eccola qui:
Codice: Seleziona tutto
Bus 003 Device 002: ID 2040:9950 Hauppauge... e, ripeto, ti serve il firmware dvb-usb-dib0700-1.20.fw ...che dovresti aver già messo in /lib/firmware.Xgaz ha scritto: Se dai questo comando sul terminale:dovrebbe uscirti una periferica con uno di questi ID:Codice: Seleziona tutto
lsusb
2040:9941
2040:9950
Quindi dovrebbe essere tutto a posto...anche dai messaggi che ti da!
Verifica che in /dev/dvb ti abbia creato gli adapter0 e adapter1
Se ci sono, e non ti trova i canali, probabilmente bisogna attivare una funzione del driver (un pò "nascosta" nel wiki di linuxtv.org) per abilitare il preamplificatore d'antenna LNA (Low Noise Amplifier):
Crea questo file:
Codice: Seleziona tutto
sudo gedit /etc/modprobe.d/options.confCodice: Seleziona tutto
options dvb-usb-dib0700 force_lna_activation=1Fammi sapere...
- bandaz
- Scoppiettante Seguace

- Messaggi: 275
- Iscrizione: lunedì 12 gennaio 2009, 19:31
- Località: Venezia
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Anch'io ho una pennetta di tipo usb che non riceve i mediaset se non collegandola all'impianto d'antenna di casa.
Forse i mediaset hanno un segnale particolare che mal si adatta a kaffeine ??
Mediaset risponde: http://www.mediasetpremium.mediaset.it/ ... tml#risp64
Altrimenti prova a rimuovere kaffeine 1.0 ed installarti il 0.8.8 (che ho anch'io) dove, nella scansione automatica, puoi impostare sia i canali a banda 8Mhz che quelli con banda 7 Mhz, nonchè gli scostamenti di canale ± 167khz...magari è quello!
- bandaz
- Scoppiettante Seguace

- Messaggi: 275
- Iscrizione: lunedì 12 gennaio 2009, 19:31
- Località: Venezia
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
comunque grazie mille, sei stato veramente gentile e di grande aiuto!
Re: [Driver] scheda pci win tv nova-t-500 aggiornamento driver, caffeine non funziona
Proverò ad investigare...
Riesci a mandarmi (anche in PM) la zona/città da dove tenti di ricevere mediaset?
Chi c’è in linea
Visualizzano questa sezione: nick091 e 10 ospiti
