[Usb] Ubuntu 9.10 si blocca durante il trasferimento da penna USB
[Usb] Ubuntu 9.10 si blocca durante il trasferimento da penna USB
Ciao a tutti,
come da oggetto il mio problema è che il sistema si blocca (non risponde più nemmeno il mouse) mentre trasferisco file dalla penna USB (ho provato con diverse chiavette).
Il blocco avviene mentre traferisco file con Nautilus, mentre non si verifica trasferendo gli stessi file da riga di comando.
In /var/log/dmesg non trovo informazioni per capire la causa del crash (sembrerebbe che l'evento non viene loggato).
Dati sistema:
- ubuntu 9.10
- notebook Acer Aspire 5738G
- 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Avete suggerimenti per capire qualcosa di più?
come da oggetto il mio problema è che il sistema si blocca (non risponde più nemmeno il mouse) mentre trasferisco file dalla penna USB (ho provato con diverse chiavette).
Il blocco avviene mentre traferisco file con Nautilus, mentre non si verifica trasferendo gli stessi file da riga di comando.
In /var/log/dmesg non trovo informazioni per capire la causa del crash (sembrerebbe che l'evento non viene loggato).
Dati sistema:
- ubuntu 9.10
- notebook Acer Aspire 5738G
- 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Avete suggerimenti per capire qualcosa di più?
Re: [Usb] Ubuntu 9.10 si blocca durante il trasferimento da penna USB
Ciao!
Anche a me è successa la stessa cosa da te descritta sia con ubuntu 9.10 che con la nuova 10.04, addirittura usando il lettore di schede integrato;
ho risolto disinstallando i driver ufficiali nvidia e utilizzando al loro posto quelli open.
Non so darti una spiegazione, ma prova e fammi sapere! Il mio pc non si è più bloccato
Ciao!
Anche a me è successa la stessa cosa da te descritta sia con ubuntu 9.10 che con la nuova 10.04, addirittura usando il lettore di schede integrato;
ho risolto disinstallando i driver ufficiali nvidia e utilizzando al loro posto quelli open.
Non so darti una spiegazione, ma prova e fammi sapere! Il mio pc non si è più bloccato
Ciao!
Re: [Usb] Ubuntu 9.10 si blocca durante il trasferimento da penna USB
Ciao Ricky,
proverò a breve.
Ho anche aggiornato ubuntu da 9.10 a 10.04 senza ottenere miglioramenti
Ciao
proverò a breve.
Ho anche aggiornato ubuntu da 9.10 a 10.04 senza ottenere miglioramenti
Ciao
Re: [Usb] Ubuntu 9.10 si blocca durante il trasferimento da penna USB
ciao io son passato ad ubuntu 10.04 da poco ed ho un problema non le 3 porte usb, non mi leggono nessuna periferica che attacco, l'unica a volte funzionante è il muose sapete suggerirmi qualcosa??? grazie
Re: [Usb] Ubuntu 9.10 si blocca durante il trasferimento da penna USB
Quando attacchi una periferica alla porta usb digita 'dmesg' da terminale. Dai log si potrebbe capire il problema
- magozurlinux
- Accecante Asceta

- Messaggi: 25019
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: xubuntu
- Distribuzione: Xubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: [Usb] Ubuntu 9.10 si blocca durante il trasferimento da penna USB
Ciao,
da terminale dai questo comando:
groups
guarda la riga e vedi se c'è fuse
se fuse non è in elenco digitare questo comando:
sudo adduser tuo-nome-utente fuse
riavviare il pc.

da terminale dai questo comando:
groups
guarda la riga e vedi se c'è fuse
se fuse non è in elenco digitare questo comando:
sudo adduser tuo-nome-utente fuse
riavviare il pc.
Re: [Usb] Ubuntu 9.10 si blocca durante il trasferimento da penna USB
ciao matteogll eccoti il post con penna usb attaccata e non vista
comando: dmesg
[ 0.482538] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.482547] pci 0000:00:1c.0: setting latency timer to 64
[ 0.482561] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.482566] alloc irq_desc for 19 on node -1
[ 0.482569] alloc kstat_irqs on node -1
[ 0.482575] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.482583] pci 0000:00:1c.3: setting latency timer to 64
[ 0.482596] pci 0000:00:1c.5: enabling device (0000 -> 0003)
[ 0.482601] alloc irq_desc for 16 on node -1
[ 0.482604] alloc kstat_irqs on node -1
[ 0.482609] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.482618] pci 0000:00:1c.5: setting latency timer to 64
[ 0.482629] pci 0000:00:1e.0: setting latency timer to 64
[ 0.482636] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.482640] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.482645] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.482648] pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff]
[ 0.482653] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.482657] pci_bus 0000:07: resource 0 io: [0x3000-0x3fff]
[ 0.482660] pci_bus 0000:07: resource 1 mem: [0x80400000-0x805fffff]
[ 0.482664] pci_bus 0000:07: resource 2 pref mem [0x80600000-0x807fffff]
[ 0.482668] pci_bus 0000:09: resource 0 io: [0x4000-0x4fff]
[ 0.482672] pci_bus 0000:09: resource 1 mem: [0x80800000-0x809fffff]
[ 0.482676] pci_bus 0000:09: resource 2 pref mem [0x80a00000-0x80bfffff]
[ 0.482680] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.482683] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.482748] NET: Registered protocol family 2
[ 0.482960] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.484117] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.486905] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.487526] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.487531] TCP reno registered
[ 0.487699] NET: Registered protocol family 1
[ 0.487733] pci 0000:00:02.0: Boot video device
[ 0.488004] Simple Boot Flag at 0x36 set to 0x1
[ 0.488290] Scanning for low memory corruption every 60 seconds
[ 0.488524] audit: initializing netlink socket (disabled)
[ 0.488538] type=2000 audit(1276104985.479:1): initialized
[ 0.504715] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.507061] VFS: Disk quotas dquot_6.5.2
[ 0.507159] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.508129] fuse init (API version 7.13)
[ 0.508270] msgmni has been set to 3860
[ 0.508611] alg: No test for stdrng (krng)
[ 0.508705] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.508710] io scheduler noop registered
[ 0.508713] io scheduler anticipatory registered
[ 0.508716] io scheduler deadline registered
[ 0.508778] io scheduler cfq registered (default)
[ 0.509010] alloc irq_desc for 24 on node -1
[ 0.509013] alloc kstat_irqs on node -1
[ 0.509029] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.509043] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.509242] alloc irq_desc for 25 on node -1
[ 0.509246] alloc kstat_irqs on node -1
[ 0.509257] pcieport 0000:00:1c.3: irq 25 for MSI/MSI-X
[ 0.509271] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.509497] alloc irq_desc for 26 on node -1
[ 0.509500] alloc kstat_irqs on node -1
[ 0.509512] pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 0.509526] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.509674] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.509875] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.510475] ACPI: AC Adapter [ACAD] (off-line)
[ 0.510607] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.510725] ACPI: Lid Switch [LID]
[ 0.510795] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.510799] ACPI: Power Button [PWRB]
[ 0.510870] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.510874] ACPI: Sleep Button [SLPB]
[ 0.510968] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.510972] ACPI: Power Button [PWRF]
[ 0.512474] ACPI: SSDT 000000007bb18620 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.513986] Monitor-Mwait will be used to enter C-1 state
[ 0.514038] Monitor-Mwait will be used to enter C-2 state
[ 0.514076] Monitor-Mwait will be used to enter C-3 state
[ 0.514086] Marking TSC unstable due to TSC halts in idle
[ 0.514193] processor LNXCPU:00: registered as cooling_device0
[ 0.515017] ACPI: SSDT 000000007bb19f20 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.516442] Switching to clocksource hpet
[ 0.517260] processor LNXCPU:01: registered as cooling_device1
[ 0.524568] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.524582] ACPI: Thermal Zone [THRM] (51 C)
[ 0.527056] Linux agpgart interface v0.103
[ 0.527111] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.529166] brd: module loaded
[ 0.529934] loop: module loaded
[ 0.530106] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.530761] Fixed MDIO Bus: probed
[ 0.530816] PPP generic driver version 2.4.2
[ 0.530881] tun: Universal TUN/TAP device driver, 1.6
[ 0.530884] tun: (C) 1999-2004 Max Krasnyansky
[ 0.531019] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.531056] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.531083] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.531088] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.531149] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.531193] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.535096] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.535123] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0904800
[ 0.552563] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.552741] usb usb1: configuration #1 chosen from 1 choice
[ 0.552786] hub 1-0:1.0: USB hub found
[ 0.552799] hub 1-0:1.0: 4 ports detected
[ 0.552897] alloc irq_desc for 23 on node -1
[ 0.552901] alloc kstat_irqs on node -1
[ 0.552912] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.552938] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.552943] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.553001] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.553040] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.556913] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.556941] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0904c00
[ 0.582529] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.582700] usb usb2: configuration #1 chosen from 1 choice
[ 0.582747] hub 2-0:1.0: USB hub found
[ 0.582761] hub 2-0:1.0: 8 ports detected
[ 0.582868] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.582896] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.582948] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.582960] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.582966] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.583025] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.583076] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.583222] usb usb3: configuration #1 chosen from 1 choice
[ 0.583264] hub 3-0:1.0: USB hub found
[ 0.583275] hub 3-0:1.0: 2 ports detected
[ 0.583351] alloc irq_desc for 21 on node -1
[ 0.583355] alloc kstat_irqs on node -1
[ 0.583364] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.583377] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.583382] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.583446] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.583489] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.583632] usb usb4: configuration #1 chosen from 1 choice
[ 0.583672] hub 4-0:1.0: USB hub found
[ 0.583682] hub 4-0:1.0: 2 ports detected
[ 0.583754] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.583765] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.583770] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.583832] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.583867] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.584008] usb usb5: configuration #1 chosen from 1 choice
[ 0.584048] hub 5-0:1.0: USB hub found
[ 0.584059] hub 5-0:1.0: 2 ports detected
[ 0.584136] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.584145] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.584150] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.584210] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.584242] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 0.584380] usb usb6: configuration #1 chosen from 1 choice
[ 0.584424] hub 6-0:1.0: USB hub found
[ 0.584434] hub 6-0:1.0: 2 ports detected
[ 0.584500] alloc irq_desc for 18 on node -1
[ 0.584504] alloc kstat_irqs on node -1
[ 0.584512] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.584521] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.584526] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.584581] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.584624] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.584759] usb usb7: configuration #1 chosen from 1 choice
[ 0.584805] hub 7-0:1.0: USB hub found
[ 0.584815] hub 7-0:1.0: 2 ports detected
[ 0.584890] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.584900] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.584905] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.584959] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.584993] uhci_hcd 0000:00:1d.3: irq 16, io base 0x000018c0
[ 0.585144] usb usb8: configuration #1 chosen from 1 choice
[ 0.585188] hub 8-0:1.0: USB hub found
[ 0.585198] hub 8-0:1.0: 2 ports detected
[ 0.585343] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.592379] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.596138] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.596157] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.596163] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.596167] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.596172] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.596342] mice: PS/2 mouse device common for all mice
[ 0.596582] rtc_cmos 00:05: RTC can wake from S4
[ 0.596651] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.596688] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.596899] device-mapper: uevent: version 1.0.3
[ 0.597091] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.597193] device-mapper: multipath: version 1.1.0 loaded
[ 0.597197] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.597530] cpuidle: using governor ladder
[ 0.597704] cpuidle: using governor menu
[ 0.598256] TCP cubic registered
[ 0.598462] NET: Registered protocol family 10
[ 0.599155] lo: Disabled Privacy Extensions
[ 0.599627] NET: Registered protocol family 17
[ 0.599841] PM: Resume from disk failed.
[ 0.599858] registered taskstats version 1
[ 0.600471] Magic number: 14:60:643
[ 0.600589] rtc_cmos 00:05: setting system clock to 2010-06-09 17:36:26 UTC (1276104986)
[ 0.600594] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.600597] EDD information not available.
[ 0.621731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.662631] Freeing initrd memory: 8139k freed
[ 0.667064] Freeing unused kernel memory: 876k freed
[ 0.667515] Write protecting the kernel read-only data: 7680k
[ 0.694522] udev: starting version 151
[ 0.842452] ahci 0000:00:1f.2: version 3.0
[ 0.842477] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.863696] alloc irq_desc for 27 on node -1
[ 0.863702] alloc kstat_irqs on node -1
[ 0.863720] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 0.863838] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.863844] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ccc sxs
[ 0.863853] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.865564] scsi0 : ahci
[ 0.866025] scsi1 : ahci
[ 0.866288] scsi2 : ahci
[ 0.866500] scsi3 : ahci
[ 0.866605] scsi4 : ahci
[ 0.866707] scsi5 : ahci
[ 0.867080] ata1: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904100 irq 27
[ 0.867085] ata2: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904180 irq 27
[ 0.867089] ata3: DUMMY
[ 0.867091] ata4: DUMMY
[ 0.867095] ata5: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904300 irq 27
[ 0.867100] ata6: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904380 irq 27
[ 0.902555] usb 2-8: new high speed USB device using ehci_hcd and address 2
[ 1.044413] ACPI: Battery Slot [BAT1] (battery present)
[ 1.088244] usb 2-8: configuration #1 chosen from 1 choice
[ 1.210082] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.210109] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.390055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.390083] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.790127] ACPI Warning for \_SB_.PCI0.SAT0.PRT1._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.790140] ata2.00: _GTF unexpected object type 0x1
[ 1.790214] ACPI Warning for \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.790223] ata1.00: _GTF unexpected object type 0x1
[ 1.792032] ata2.00: ATAPI: Optiarc DVD RW AD-7585H, KX04, max UDMA/100, ATAPI AN
[ 1.837703] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.837709] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.190124] ata2.00: _GTF unexpected object type 0x1
[ 2.192044] ata2.00: configured for UDMA/100
[ 2.230120] ata1.00: _GTF unexpected object type 0x1
[ 2.230356] ata1.00: configured for UDMA/133
[ 2.250196] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[ 2.250454] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.250596] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.250670] sd 0:0:0:0: [sda] Write Protect is off
[ 2.250675] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.250713] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.250925] sda:
[ 2.253172] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7585H KX04 PQ: 0 ANSI: 5
[ 2.260041] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.260046] Uniform CD-ROM driver Revision: 3.20
[ 2.260209] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.260303] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.296253] sda1 sda2
[ 2.321548] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.640851] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 11.992410] udev: starting version 151
[ 11.997323] Adding 5814264k swap on /dev/sda5. Priority:-1 extents:1 across:5814264k
[ 12.090076] lp: driver loaded but no devices found
[ 12.123566] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 12.124304] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
[ 12.203959] atl1c 0000:09:00.0: enabling device (0000 -> 0002)
[ 12.203972] atl1c 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 12.203993] atl1c 0000:09:00.0: setting latency timer to 64
[ 12.323716] atl1c 0000:09:00.0: version 1.0.0.2-NAPI
[ 12.367504] [drm] Initialized drm 1.1.0 20060810
[ 12.380209] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 12.384955] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[ 12.406311] Linux video capture interface: v2.00
[ 12.412047] cfg80211: Calling CRDA to update world regulatory domain
[ 12.419275] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 12.420150] acer-wmi: Brightness must be controlled by generic video driver
[ 12.448736] uvcvideo: Found UVC 1.00 device Video WebCam (04f2:b044)
[ 12.450192] cfg80211: World regulatory domain updated:
[ 12.450200] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.450206] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.450211] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.450215] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.450219] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.450224] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.477657] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.477666] i915 0000:00:02.0: setting latency timer to 64
[ 12.508812] input: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-8/2-8:1.0/input/input6
[ 12.508906] usbcore: registered new interface driver uvcvideo
[ 12.508910] USB Video Class driver (v0.1.0)
[ 12.520215] type=1505 audit(1276104998.411:2): operation="profile_load" pid=619 name="/sbin/dhclient3"
[ 12.521332] type=1505 audit(1276104998.411:3): operation="profile_load" pid=619 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 12.521930] type=1505 audit(1276104998.411:4): operation="profile_load" pid=619 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.525599] alloc irq_desc for 28 on node -1
[ 12.525604] alloc kstat_irqs on node -1
[ 12.525617] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 12.525627] [drm] set up 63M of stolen space
[ 12.542113] usbcore: registered new interface driver hiddev
[ 12.542501] usbcore: registered new interface driver usbhid
[ 12.542793] usbhid: v2.6:USB HID core driver
[ 12.671269] Initializing USB Mass Storage driver...
[ 12.671406] usbcore: registered new interface driver usb-storage
[ 12.671411] USB Mass Storage support registered.
[ 13.122162] type=1505 audit(1276104999.011:5): operation="profile_load" pid=742 name="/usr/share/gdm/guest-session/Xsession"
[ 13.125306] type=1505 audit(1276104999.021:6): operation="profile_replace" pid=743 name="/sbin/dhclient3"
[ 13.126429] type=1505 audit(1276104999.021:7): operation="profile_replace" pid=743 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 13.127030] type=1505 audit(1276104999.021:8): operation="profile_replace" pid=743 name="/usr/lib/connman/scripts/dhclient-script"
[ 13.132209] type=1505 audit(1276104999.021:9): operation="profile_load" pid=744 name="/usr/bin/evince"
[ 13.165601] type=1505 audit(1276104999.061:10): operation="profile_load" pid=744 name="/usr/bin/evince-previewer"
[ 13.171081] ath9k 0000:07:00.0: enabling device (0000 -> 0002)
[ 13.171094] ath9k 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 13.171111] ath9k 0000:07:00.0: setting latency timer to 64
[ 13.313403] fb0: inteldrmfb frame buffer device
[ 13.313408] registered panic notifier
[ 13.319611] type=1505 audit(1276104999.211:11): operation="profile_load" pid=744 name="/usr/bin/evince-thumbnailer"
[ 13.338244] alloc irq_desc for 29 on node -1
[ 13.338249] alloc kstat_irqs on node -1
[ 13.338271] atl1c 0000:09:00.0: irq 29 for MSI/MSI-X
[ 13.338957] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.341469] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000
[ 13.351219] acpi device:01: registered as cooling_device2
[ 13.351718] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 13.351807] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.351866] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.354526] vga16fb: initializing
[ 13.354531] vga16fb: mapped to 0xffff8800000a0000
[ 13.354538] vga16fb: not registering due to another framebuffer present
[ 13.394292] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[ 13.574669] alloc irq_desc for 22 on node -1
[ 13.574674] alloc kstat_irqs on node -1
[ 13.574685] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.574741] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.610563] ath: EEPROM regdomain: 0x65
[ 13.610567] ath: EEPROM indicates we should expect a direct regpair map
[ 13.610572] ath: Country alpha2 being used: 00
[ 13.610575] ath: Regpair used: 0x65
[ 13.624430] Console: switching to colour frame buffer device 170x48
[ 13.704484] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 13.705609] Registered led device: ath9k-phy0::radio
[ 13.705640] Registered led device: ath9k-phy0::assoc
[ 13.705667] Registered led device: ath9k-phy0::tx
[ 13.705693] Registered led device: ath9k-phy0::rx
[ 13.705711] phy0: Atheros AR9280 Rev:2 mem=0xffffc90010ea0000, irq=19
[ 13.756708] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.756848] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.756959] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.843736] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.972618] atl1c 0000:09:00.0: atl1c: eth0 NIC Link is Up
[ 13.973056] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.317064] ppdev: user-space parallel port driver
[ 21.634430] wlan0: direct probe to AP 00:25:53:90:9b:22 (try 1)
[ 21.660057] wlan0: direct probe responded
[ 21.660065] wlan0: authenticate with AP 00:25:53:90:9b:22 (try 1)
[ 21.664078] wlan0: authenticated
[ 21.664118] wlan0: associate with AP 00:25:53:90:9b:22 (try 1)
[ 21.666815] wlan0: RX AssocResp from 00:25:53:90:9b:22 (capab=0x471 status=0 aid=2)
[ 21.666822] wlan0: associated
[ 21.667580] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.242530] eth0: no IPv6 routers present
[ 26.767600] Intel AES-NI instructions are not detected.
[ 26.825629] padlock: VIA PadLock not detected.
[ 31.870026] wlan0: no IPv6 routers present
[ 122.100053] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 122.304014] usb 6-1: configuration #1 chosen from 1 choice
[ 122.332532] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input12
[ 122.332722] generic-usb 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 130.552564] usb 2-1: new high speed USB device using ehci_hcd and address 4
[ 130.705454] usb 2-1: configuration #1 chosen from 1 choice
[ 130.711858] scsi6 : SCSI emulation for USB Mass Storage devices
[ 130.712233] usb-storage: device found at 4
[ 130.712238] usb-storage: waiting for device to settle before scanning
[ 135.702788] usb-storage: device scan complete
[ 135.703275] scsi 6:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS
[ 135.705168] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 135.706187] sd 6:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 135.706764] sd 6:0:0:0: [sdb] Write Protect is off
[ 135.706771] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 135.706776] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 135.710003] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 135.710014] sdb: sdb1
[ 135.712867] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 135.712877] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 139.012615] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 147.472556] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 147.633267] usb 1-1: configuration #1 chosen from 1 choice
[ 217.696812] usb 1-1: USB disconnect, address 2
[ 222.529038] usb 2-1: USB disconnect, address 4
[ 226.270176] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 226.423609] usb 1-1: configuration #1 chosen from 1 choice
[ 241.958050] usb 1-1: USB disconnect, address 3
[ 243.170143] usb 2-1: new high speed USB device using ehci_hcd and address 5
[ 243.322789] usb 2-1: configuration #1 chosen from 1 choice
[ 243.329086] scsi7 : SCSI emulation for USB Mass Storage devices
[ 243.329340] usb-storage: device found at 5
[ 243.329344] usb-storage: waiting for device to settle before scanning
[ 248.320214] usb-storage: device scan complete
[ 248.320700] scsi 7:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS
[ 248.322309] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 248.323179] sd 7:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 248.323676] sd 7:0:0:0: [sdb] Write Protect is off
[ 248.323684] sd 7:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 248.323688] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 248.325427] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 248.325437] sdb: sdb1
[ 248.327925] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 248.327934] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 263.540162] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 263.692925] usb 1-1: configuration #1 chosen from 1 choice
[ 271.350417] scsi8 : SCSI emulation for USB Mass Storage devices
[ 271.350597] usbcore: registered new interface driver ums-cypress
[ 271.353388] usb-storage: device found at 4
[ 271.353393] usb-storage: waiting for device to settle before scanning
[ 276.358126] usb-storage: device scan complete
[ 276.361314] scsi 8:0:0:0: Direct-Access Maxtor 4 A250J0 0000 PQ: 0 ANSI: 0
[ 276.362336] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 276.370550] sd 8:0:0:0: [sdc] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 276.373096] sd 8:0:0:0: [sdc] Write Protect is off
[ 276.373104] sd 8:0:0:0: [sdc] Mode Sense: 27 00 00 00
[ 276.373109] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 276.375053] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 276.375067] sdc: sdc1
[ 276.386901] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 276.386910] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 482.291144] usb 6-1: USB disconnect, address 2
[ 485.900622] usb 6-1: new low speed USB device using uhci_hcd and address 3
[ 486.084544] usb 6-1: configuration #1 chosen from 1 choice
[ 486.113328] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input13
[ 486.113543] generic-usb 0003:045E:00A4.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 734.131794] usb 2-1: USB disconnect, address 5
[ 737.040290] usb 2-1: new high speed USB device using ehci_hcd and address 7
[ 737.191167] usb 2-1: configuration #1 chosen from 1 choice
[ 737.195115] scsi9 : SCSI emulation for USB Mass Storage devices
[ 737.195357] usb-storage: device found at 7
[ 737.195361] usb-storage: waiting for device to settle before scanning
[ 742.190316] usb-storage: device scan complete
[ 742.190803] scsi 9:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS
[ 742.191605] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 742.192407] sd 9:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 742.192904] sd 9:0:0:0: [sdb] Write Protect is off
[ 742.192910] sd 9:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 742.192915] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 742.195537] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 742.195549] sdb: sdb1
[ 742.199878] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 742.199889] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 771.953537] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 771.953550] Descriptor sense data with sense descriptors (in hex):
[ 771.953553] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[ 771.953569] 00 00 00 00 e0 50
[ 771.953577] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 802.153291] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 802.153303] Descriptor sense data with sense descriptors (in hex):
[ 802.153306] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[ 802.153322] 00 00 00 00 e0 50
[ 802.153329] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 802.154044] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 802.154056] Descriptor sense data with sense descriptors (in hex):
[ 802.154059] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 ff 00 00
[ 802.154075] 00 00 00 00 e0 50
[ 802.154082] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 802.202141] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 802.202153] Descriptor sense data with sense descriptors (in hex):
[ 802.202157] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[ 802.202172] 00 4f 00 c2 e0 50
[ 802.202179] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 802.234420] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 802.234432] Descriptor sense data with sense descriptors (in hex):
[ 802.234436] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[ 802.234451] 00 4f 00 c2 e0 50
[ 802.234459] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 802.278383] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 802.278396] Descriptor sense data with sense descriptors (in hex):
[ 802.278399] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[ 802.278415] 00 4f 00 c2 e0 50
[ 802.278422] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 904.872656] usb 1-1: USB disconnect, address 4
[ 906.870051] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 907.022782] usb 1-1: configuration #1 chosen from 1 choice
[ 907.024143] scsi10 : SCSI emulation for USB Mass Storage devices
[ 907.024392] usb-storage: device found at 5
[ 907.024396] usb-storage: waiting for device to settle before scanning
[ 912.024886] usb-storage: device scan complete
[ 912.027060] scsi 10:0:0:0: Direct-Access Maxtor 4 A250J0 0000 PQ: 0 ANSI: 0
[ 912.027818] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 912.029293] sd 10:0:0:0: [sdc] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 912.030283] sd 10:0:0:0: [sdc] Write Protect is off
[ 912.030290] sd 10:0:0:0: [sdc] Mode Sense: 27 00 00 00
[ 912.030294] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 912.031898] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 912.031908] sdc: sdc1
[ 912.074143] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 912.074152] sd 10:0:0:0: [sdc] Attached SCSI disk
[ 1379.542578] usb 6-1: USB disconnect, address 3
[ 1380.935992] usb 2-1: USB disconnect, address 7
[ 1381.759839] usb 1-1: USB disconnect, address 5
[ 1750.702648] usb 6-1: new low speed USB device using uhci_hcd and address 4
[ 1750.886286] usb 6-1: configuration #1 chosen from 1 choice
[ 1750.914857] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input14
[ 1750.915094] generic-usb 0003:045E:00A4.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 1867.040097] usb 6-1: USB disconnect, address 4
[ 1870.552652] usb 2-1: new high speed USB device using ehci_hcd and address 9
[ 1870.703575] usb 2-1: configuration #1 chosen from 1 choice
[ 1870.703835] scsi11 : SCSI emulation for USB Mass Storage devices
[ 1870.704045] usb-storage: device found at 9
[ 1870.704049] usb-storage: waiting for device to settle before scanning
[ 1875.705814] usb-storage: device scan complete
[ 1875.706325] scsi 11:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS
[ 1875.707081] sd 11:0:0:0: Attached scsi generic sg2 type 0
[ 1875.707928] sd 11:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 1875.708425] sd 11:0:0:0: [sdb] Write Protect is off
[ 1875.708433] sd 11:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 1875.708437] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 1875.721580] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 1875.721591] sdb: sdb1
[ 1875.724180] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 1875.724189] sd 11:0:0:0: [sdb] Attached SCSI removable disk
sbarde@sbarde:~$
magozulinux fuse non ce l'ho, ma cosa sarebbe e a cosa servirebbe???
comando: dmesg
[ 0.482538] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.482547] pci 0000:00:1c.0: setting latency timer to 64
[ 0.482561] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.482566] alloc irq_desc for 19 on node -1
[ 0.482569] alloc kstat_irqs on node -1
[ 0.482575] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.482583] pci 0000:00:1c.3: setting latency timer to 64
[ 0.482596] pci 0000:00:1c.5: enabling device (0000 -> 0003)
[ 0.482601] alloc irq_desc for 16 on node -1
[ 0.482604] alloc kstat_irqs on node -1
[ 0.482609] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.482618] pci 0000:00:1c.5: setting latency timer to 64
[ 0.482629] pci 0000:00:1e.0: setting latency timer to 64
[ 0.482636] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.482640] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.482645] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.482648] pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff]
[ 0.482653] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.482657] pci_bus 0000:07: resource 0 io: [0x3000-0x3fff]
[ 0.482660] pci_bus 0000:07: resource 1 mem: [0x80400000-0x805fffff]
[ 0.482664] pci_bus 0000:07: resource 2 pref mem [0x80600000-0x807fffff]
[ 0.482668] pci_bus 0000:09: resource 0 io: [0x4000-0x4fff]
[ 0.482672] pci_bus 0000:09: resource 1 mem: [0x80800000-0x809fffff]
[ 0.482676] pci_bus 0000:09: resource 2 pref mem [0x80a00000-0x80bfffff]
[ 0.482680] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.482683] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.482748] NET: Registered protocol family 2
[ 0.482960] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.484117] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.486905] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.487526] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.487531] TCP reno registered
[ 0.487699] NET: Registered protocol family 1
[ 0.487733] pci 0000:00:02.0: Boot video device
[ 0.488004] Simple Boot Flag at 0x36 set to 0x1
[ 0.488290] Scanning for low memory corruption every 60 seconds
[ 0.488524] audit: initializing netlink socket (disabled)
[ 0.488538] type=2000 audit(1276104985.479:1): initialized
[ 0.504715] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.507061] VFS: Disk quotas dquot_6.5.2
[ 0.507159] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.508129] fuse init (API version 7.13)
[ 0.508270] msgmni has been set to 3860
[ 0.508611] alg: No test for stdrng (krng)
[ 0.508705] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.508710] io scheduler noop registered
[ 0.508713] io scheduler anticipatory registered
[ 0.508716] io scheduler deadline registered
[ 0.508778] io scheduler cfq registered (default)
[ 0.509010] alloc irq_desc for 24 on node -1
[ 0.509013] alloc kstat_irqs on node -1
[ 0.509029] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.509043] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.509242] alloc irq_desc for 25 on node -1
[ 0.509246] alloc kstat_irqs on node -1
[ 0.509257] pcieport 0000:00:1c.3: irq 25 for MSI/MSI-X
[ 0.509271] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.509497] alloc irq_desc for 26 on node -1
[ 0.509500] alloc kstat_irqs on node -1
[ 0.509512] pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 0.509526] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.509674] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.509875] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.510475] ACPI: AC Adapter [ACAD] (off-line)
[ 0.510607] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.510725] ACPI: Lid Switch [LID]
[ 0.510795] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.510799] ACPI: Power Button [PWRB]
[ 0.510870] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.510874] ACPI: Sleep Button [SLPB]
[ 0.510968] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.510972] ACPI: Power Button [PWRF]
[ 0.512474] ACPI: SSDT 000000007bb18620 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.513986] Monitor-Mwait will be used to enter C-1 state
[ 0.514038] Monitor-Mwait will be used to enter C-2 state
[ 0.514076] Monitor-Mwait will be used to enter C-3 state
[ 0.514086] Marking TSC unstable due to TSC halts in idle
[ 0.514193] processor LNXCPU:00: registered as cooling_device0
[ 0.515017] ACPI: SSDT 000000007bb19f20 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.516442] Switching to clocksource hpet
[ 0.517260] processor LNXCPU:01: registered as cooling_device1
[ 0.524568] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.524582] ACPI: Thermal Zone [THRM] (51 C)
[ 0.527056] Linux agpgart interface v0.103
[ 0.527111] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.529166] brd: module loaded
[ 0.529934] loop: module loaded
[ 0.530106] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.530761] Fixed MDIO Bus: probed
[ 0.530816] PPP generic driver version 2.4.2
[ 0.530881] tun: Universal TUN/TAP device driver, 1.6
[ 0.530884] tun: (C) 1999-2004 Max Krasnyansky
[ 0.531019] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.531056] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.531083] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.531088] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.531149] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.531193] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.535096] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.535123] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0904800
[ 0.552563] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.552741] usb usb1: configuration #1 chosen from 1 choice
[ 0.552786] hub 1-0:1.0: USB hub found
[ 0.552799] hub 1-0:1.0: 4 ports detected
[ 0.552897] alloc irq_desc for 23 on node -1
[ 0.552901] alloc kstat_irqs on node -1
[ 0.552912] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.552938] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.552943] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.553001] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.553040] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.556913] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.556941] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0904c00
[ 0.582529] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.582700] usb usb2: configuration #1 chosen from 1 choice
[ 0.582747] hub 2-0:1.0: USB hub found
[ 0.582761] hub 2-0:1.0: 8 ports detected
[ 0.582868] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.582896] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.582948] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.582960] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.582966] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.583025] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.583076] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.583222] usb usb3: configuration #1 chosen from 1 choice
[ 0.583264] hub 3-0:1.0: USB hub found
[ 0.583275] hub 3-0:1.0: 2 ports detected
[ 0.583351] alloc irq_desc for 21 on node -1
[ 0.583355] alloc kstat_irqs on node -1
[ 0.583364] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.583377] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.583382] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.583446] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.583489] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.583632] usb usb4: configuration #1 chosen from 1 choice
[ 0.583672] hub 4-0:1.0: USB hub found
[ 0.583682] hub 4-0:1.0: 2 ports detected
[ 0.583754] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.583765] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.583770] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.583832] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.583867] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.584008] usb usb5: configuration #1 chosen from 1 choice
[ 0.584048] hub 5-0:1.0: USB hub found
[ 0.584059] hub 5-0:1.0: 2 ports detected
[ 0.584136] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.584145] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.584150] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.584210] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.584242] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 0.584380] usb usb6: configuration #1 chosen from 1 choice
[ 0.584424] hub 6-0:1.0: USB hub found
[ 0.584434] hub 6-0:1.0: 2 ports detected
[ 0.584500] alloc irq_desc for 18 on node -1
[ 0.584504] alloc kstat_irqs on node -1
[ 0.584512] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.584521] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.584526] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.584581] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.584624] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.584759] usb usb7: configuration #1 chosen from 1 choice
[ 0.584805] hub 7-0:1.0: USB hub found
[ 0.584815] hub 7-0:1.0: 2 ports detected
[ 0.584890] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.584900] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.584905] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.584959] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.584993] uhci_hcd 0000:00:1d.3: irq 16, io base 0x000018c0
[ 0.585144] usb usb8: configuration #1 chosen from 1 choice
[ 0.585188] hub 8-0:1.0: USB hub found
[ 0.585198] hub 8-0:1.0: 2 ports detected
[ 0.585343] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.592379] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.596138] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.596157] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.596163] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.596167] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.596172] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.596342] mice: PS/2 mouse device common for all mice
[ 0.596582] rtc_cmos 00:05: RTC can wake from S4
[ 0.596651] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.596688] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.596899] device-mapper: uevent: version 1.0.3
[ 0.597091] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.597193] device-mapper: multipath: version 1.1.0 loaded
[ 0.597197] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.597530] cpuidle: using governor ladder
[ 0.597704] cpuidle: using governor menu
[ 0.598256] TCP cubic registered
[ 0.598462] NET: Registered protocol family 10
[ 0.599155] lo: Disabled Privacy Extensions
[ 0.599627] NET: Registered protocol family 17
[ 0.599841] PM: Resume from disk failed.
[ 0.599858] registered taskstats version 1
[ 0.600471] Magic number: 14:60:643
[ 0.600589] rtc_cmos 00:05: setting system clock to 2010-06-09 17:36:26 UTC (1276104986)
[ 0.600594] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.600597] EDD information not available.
[ 0.621731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.662631] Freeing initrd memory: 8139k freed
[ 0.667064] Freeing unused kernel memory: 876k freed
[ 0.667515] Write protecting the kernel read-only data: 7680k
[ 0.694522] udev: starting version 151
[ 0.842452] ahci 0000:00:1f.2: version 3.0
[ 0.842477] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.863696] alloc irq_desc for 27 on node -1
[ 0.863702] alloc kstat_irqs on node -1
[ 0.863720] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 0.863838] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.863844] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ccc sxs
[ 0.863853] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.865564] scsi0 : ahci
[ 0.866025] scsi1 : ahci
[ 0.866288] scsi2 : ahci
[ 0.866500] scsi3 : ahci
[ 0.866605] scsi4 : ahci
[ 0.866707] scsi5 : ahci
[ 0.867080] ata1: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904100 irq 27
[ 0.867085] ata2: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904180 irq 27
[ 0.867089] ata3: DUMMY
[ 0.867091] ata4: DUMMY
[ 0.867095] ata5: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904300 irq 27
[ 0.867100] ata6: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904380 irq 27
[ 0.902555] usb 2-8: new high speed USB device using ehci_hcd and address 2
[ 1.044413] ACPI: Battery Slot [BAT1] (battery present)
[ 1.088244] usb 2-8: configuration #1 chosen from 1 choice
[ 1.210082] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.210109] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.390055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.390083] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.790127] ACPI Warning for \_SB_.PCI0.SAT0.PRT1._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.790140] ata2.00: _GTF unexpected object type 0x1
[ 1.790214] ACPI Warning for \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.790223] ata1.00: _GTF unexpected object type 0x1
[ 1.792032] ata2.00: ATAPI: Optiarc DVD RW AD-7585H, KX04, max UDMA/100, ATAPI AN
[ 1.837703] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.837709] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.190124] ata2.00: _GTF unexpected object type 0x1
[ 2.192044] ata2.00: configured for UDMA/100
[ 2.230120] ata1.00: _GTF unexpected object type 0x1
[ 2.230356] ata1.00: configured for UDMA/133
[ 2.250196] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[ 2.250454] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.250596] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.250670] sd 0:0:0:0: [sda] Write Protect is off
[ 2.250675] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.250713] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.250925] sda:
[ 2.253172] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7585H KX04 PQ: 0 ANSI: 5
[ 2.260041] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.260046] Uniform CD-ROM driver Revision: 3.20
[ 2.260209] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.260303] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.296253] sda1 sda2
[ 2.321548] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.640851] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 11.992410] udev: starting version 151
[ 11.997323] Adding 5814264k swap on /dev/sda5. Priority:-1 extents:1 across:5814264k
[ 12.090076] lp: driver loaded but no devices found
[ 12.123566] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 12.124304] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
[ 12.203959] atl1c 0000:09:00.0: enabling device (0000 -> 0002)
[ 12.203972] atl1c 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 12.203993] atl1c 0000:09:00.0: setting latency timer to 64
[ 12.323716] atl1c 0000:09:00.0: version 1.0.0.2-NAPI
[ 12.367504] [drm] Initialized drm 1.1.0 20060810
[ 12.380209] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 12.384955] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[ 12.406311] Linux video capture interface: v2.00
[ 12.412047] cfg80211: Calling CRDA to update world regulatory domain
[ 12.419275] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 12.420150] acer-wmi: Brightness must be controlled by generic video driver
[ 12.448736] uvcvideo: Found UVC 1.00 device Video WebCam (04f2:b044)
[ 12.450192] cfg80211: World regulatory domain updated:
[ 12.450200] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.450206] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.450211] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.450215] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.450219] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.450224] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.477657] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.477666] i915 0000:00:02.0: setting latency timer to 64
[ 12.508812] input: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-8/2-8:1.0/input/input6
[ 12.508906] usbcore: registered new interface driver uvcvideo
[ 12.508910] USB Video Class driver (v0.1.0)
[ 12.520215] type=1505 audit(1276104998.411:2): operation="profile_load" pid=619 name="/sbin/dhclient3"
[ 12.521332] type=1505 audit(1276104998.411:3): operation="profile_load" pid=619 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 12.521930] type=1505 audit(1276104998.411:4): operation="profile_load" pid=619 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.525599] alloc irq_desc for 28 on node -1
[ 12.525604] alloc kstat_irqs on node -1
[ 12.525617] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 12.525627] [drm] set up 63M of stolen space
[ 12.542113] usbcore: registered new interface driver hiddev
[ 12.542501] usbcore: registered new interface driver usbhid
[ 12.542793] usbhid: v2.6:USB HID core driver
[ 12.671269] Initializing USB Mass Storage driver...
[ 12.671406] usbcore: registered new interface driver usb-storage
[ 12.671411] USB Mass Storage support registered.
[ 13.122162] type=1505 audit(1276104999.011:5): operation="profile_load" pid=742 name="/usr/share/gdm/guest-session/Xsession"
[ 13.125306] type=1505 audit(1276104999.021:6): operation="profile_replace" pid=743 name="/sbin/dhclient3"
[ 13.126429] type=1505 audit(1276104999.021:7): operation="profile_replace" pid=743 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 13.127030] type=1505 audit(1276104999.021:8): operation="profile_replace" pid=743 name="/usr/lib/connman/scripts/dhclient-script"
[ 13.132209] type=1505 audit(1276104999.021:9): operation="profile_load" pid=744 name="/usr/bin/evince"
[ 13.165601] type=1505 audit(1276104999.061:10): operation="profile_load" pid=744 name="/usr/bin/evince-previewer"
[ 13.171081] ath9k 0000:07:00.0: enabling device (0000 -> 0002)
[ 13.171094] ath9k 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 13.171111] ath9k 0000:07:00.0: setting latency timer to 64
[ 13.313403] fb0: inteldrmfb frame buffer device
[ 13.313408] registered panic notifier
[ 13.319611] type=1505 audit(1276104999.211:11): operation="profile_load" pid=744 name="/usr/bin/evince-thumbnailer"
[ 13.338244] alloc irq_desc for 29 on node -1
[ 13.338249] alloc kstat_irqs on node -1
[ 13.338271] atl1c 0000:09:00.0: irq 29 for MSI/MSI-X
[ 13.338957] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.341469] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000
[ 13.351219] acpi device:01: registered as cooling_device2
[ 13.351718] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 13.351807] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.351866] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.354526] vga16fb: initializing
[ 13.354531] vga16fb: mapped to 0xffff8800000a0000
[ 13.354538] vga16fb: not registering due to another framebuffer present
[ 13.394292] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[ 13.574669] alloc irq_desc for 22 on node -1
[ 13.574674] alloc kstat_irqs on node -1
[ 13.574685] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.574741] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.610563] ath: EEPROM regdomain: 0x65
[ 13.610567] ath: EEPROM indicates we should expect a direct regpair map
[ 13.610572] ath: Country alpha2 being used: 00
[ 13.610575] ath: Regpair used: 0x65
[ 13.624430] Console: switching to colour frame buffer device 170x48
[ 13.704484] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 13.705609] Registered led device: ath9k-phy0::radio
[ 13.705640] Registered led device: ath9k-phy0::assoc
[ 13.705667] Registered led device: ath9k-phy0::tx
[ 13.705693] Registered led device: ath9k-phy0::rx
[ 13.705711] phy0: Atheros AR9280 Rev:2 mem=0xffffc90010ea0000, irq=19
[ 13.756708] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.756848] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.756959] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.843736] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.972618] atl1c 0000:09:00.0: atl1c: eth0 NIC Link is Up
[ 13.973056] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.317064] ppdev: user-space parallel port driver
[ 21.634430] wlan0: direct probe to AP 00:25:53:90:9b:22 (try 1)
[ 21.660057] wlan0: direct probe responded
[ 21.660065] wlan0: authenticate with AP 00:25:53:90:9b:22 (try 1)
[ 21.664078] wlan0: authenticated
[ 21.664118] wlan0: associate with AP 00:25:53:90:9b:22 (try 1)
[ 21.666815] wlan0: RX AssocResp from 00:25:53:90:9b:22 (capab=0x471 status=0 aid=2)
[ 21.666822] wlan0: associated
[ 21.667580] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.242530] eth0: no IPv6 routers present
[ 26.767600] Intel AES-NI instructions are not detected.
[ 26.825629] padlock: VIA PadLock not detected.
[ 31.870026] wlan0: no IPv6 routers present
[ 122.100053] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 122.304014] usb 6-1: configuration #1 chosen from 1 choice
[ 122.332532] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input12
[ 122.332722] generic-usb 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 130.552564] usb 2-1: new high speed USB device using ehci_hcd and address 4
[ 130.705454] usb 2-1: configuration #1 chosen from 1 choice
[ 130.711858] scsi6 : SCSI emulation for USB Mass Storage devices
[ 130.712233] usb-storage: device found at 4
[ 130.712238] usb-storage: waiting for device to settle before scanning
[ 135.702788] usb-storage: device scan complete
[ 135.703275] scsi 6:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS
[ 135.705168] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 135.706187] sd 6:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 135.706764] sd 6:0:0:0: [sdb] Write Protect is off
[ 135.706771] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 135.706776] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 135.710003] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 135.710014] sdb: sdb1
[ 135.712867] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 135.712877] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 139.012615] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 147.472556] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 147.633267] usb 1-1: configuration #1 chosen from 1 choice
[ 217.696812] usb 1-1: USB disconnect, address 2
[ 222.529038] usb 2-1: USB disconnect, address 4
[ 226.270176] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 226.423609] usb 1-1: configuration #1 chosen from 1 choice
[ 241.958050] usb 1-1: USB disconnect, address 3
[ 243.170143] usb 2-1: new high speed USB device using ehci_hcd and address 5
[ 243.322789] usb 2-1: configuration #1 chosen from 1 choice
[ 243.329086] scsi7 : SCSI emulation for USB Mass Storage devices
[ 243.329340] usb-storage: device found at 5
[ 243.329344] usb-storage: waiting for device to settle before scanning
[ 248.320214] usb-storage: device scan complete
[ 248.320700] scsi 7:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS
[ 248.322309] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 248.323179] sd 7:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 248.323676] sd 7:0:0:0: [sdb] Write Protect is off
[ 248.323684] sd 7:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 248.323688] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 248.325427] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 248.325437] sdb: sdb1
[ 248.327925] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 248.327934] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 263.540162] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 263.692925] usb 1-1: configuration #1 chosen from 1 choice
[ 271.350417] scsi8 : SCSI emulation for USB Mass Storage devices
[ 271.350597] usbcore: registered new interface driver ums-cypress
[ 271.353388] usb-storage: device found at 4
[ 271.353393] usb-storage: waiting for device to settle before scanning
[ 276.358126] usb-storage: device scan complete
[ 276.361314] scsi 8:0:0:0: Direct-Access Maxtor 4 A250J0 0000 PQ: 0 ANSI: 0
[ 276.362336] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 276.370550] sd 8:0:0:0: [sdc] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 276.373096] sd 8:0:0:0: [sdc] Write Protect is off
[ 276.373104] sd 8:0:0:0: [sdc] Mode Sense: 27 00 00 00
[ 276.373109] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 276.375053] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 276.375067] sdc: sdc1
[ 276.386901] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 276.386910] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 482.291144] usb 6-1: USB disconnect, address 2
[ 485.900622] usb 6-1: new low speed USB device using uhci_hcd and address 3
[ 486.084544] usb 6-1: configuration #1 chosen from 1 choice
[ 486.113328] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input13
[ 486.113543] generic-usb 0003:045E:00A4.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 734.131794] usb 2-1: USB disconnect, address 5
[ 737.040290] usb 2-1: new high speed USB device using ehci_hcd and address 7
[ 737.191167] usb 2-1: configuration #1 chosen from 1 choice
[ 737.195115] scsi9 : SCSI emulation for USB Mass Storage devices
[ 737.195357] usb-storage: device found at 7
[ 737.195361] usb-storage: waiting for device to settle before scanning
[ 742.190316] usb-storage: device scan complete
[ 742.190803] scsi 9:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS
[ 742.191605] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 742.192407] sd 9:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 742.192904] sd 9:0:0:0: [sdb] Write Protect is off
[ 742.192910] sd 9:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 742.192915] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 742.195537] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 742.195549] sdb: sdb1
[ 742.199878] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 742.199889] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 771.953537] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 771.953550] Descriptor sense data with sense descriptors (in hex):
[ 771.953553] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[ 771.953569] 00 00 00 00 e0 50
[ 771.953577] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 802.153291] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 802.153303] Descriptor sense data with sense descriptors (in hex):
[ 802.153306] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[ 802.153322] 00 00 00 00 e0 50
[ 802.153329] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 802.154044] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 802.154056] Descriptor sense data with sense descriptors (in hex):
[ 802.154059] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 ff 00 00
[ 802.154075] 00 00 00 00 e0 50
[ 802.154082] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 802.202141] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 802.202153] Descriptor sense data with sense descriptors (in hex):
[ 802.202157] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[ 802.202172] 00 4f 00 c2 e0 50
[ 802.202179] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 802.234420] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 802.234432] Descriptor sense data with sense descriptors (in hex):
[ 802.234436] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[ 802.234451] 00 4f 00 c2 e0 50
[ 802.234459] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 802.278383] sd 8:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
[ 802.278396] Descriptor sense data with sense descriptors (in hex):
[ 802.278399] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[ 802.278415] 00 4f 00 c2 e0 50
[ 802.278422] sd 8:0:0:0: [sdc] Add. Sense: ATA pass through information available
[ 904.872656] usb 1-1: USB disconnect, address 4
[ 906.870051] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 907.022782] usb 1-1: configuration #1 chosen from 1 choice
[ 907.024143] scsi10 : SCSI emulation for USB Mass Storage devices
[ 907.024392] usb-storage: device found at 5
[ 907.024396] usb-storage: waiting for device to settle before scanning
[ 912.024886] usb-storage: device scan complete
[ 912.027060] scsi 10:0:0:0: Direct-Access Maxtor 4 A250J0 0000 PQ: 0 ANSI: 0
[ 912.027818] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 912.029293] sd 10:0:0:0: [sdc] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 912.030283] sd 10:0:0:0: [sdc] Write Protect is off
[ 912.030290] sd 10:0:0:0: [sdc] Mode Sense: 27 00 00 00
[ 912.030294] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 912.031898] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 912.031908] sdc: sdc1
[ 912.074143] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 912.074152] sd 10:0:0:0: [sdc] Attached SCSI disk
[ 1379.542578] usb 6-1: USB disconnect, address 3
[ 1380.935992] usb 2-1: USB disconnect, address 7
[ 1381.759839] usb 1-1: USB disconnect, address 5
[ 1750.702648] usb 6-1: new low speed USB device using uhci_hcd and address 4
[ 1750.886286] usb 6-1: configuration #1 chosen from 1 choice
[ 1750.914857] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input14
[ 1750.915094] generic-usb 0003:045E:00A4.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 1867.040097] usb 6-1: USB disconnect, address 4
[ 1870.552652] usb 2-1: new high speed USB device using ehci_hcd and address 9
[ 1870.703575] usb 2-1: configuration #1 chosen from 1 choice
[ 1870.703835] scsi11 : SCSI emulation for USB Mass Storage devices
[ 1870.704045] usb-storage: device found at 9
[ 1870.704049] usb-storage: waiting for device to settle before scanning
[ 1875.705814] usb-storage: device scan complete
[ 1875.706325] scsi 11:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS
[ 1875.707081] sd 11:0:0:0: Attached scsi generic sg2 type 0
[ 1875.707928] sd 11:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 1875.708425] sd 11:0:0:0: [sdb] Write Protect is off
[ 1875.708433] sd 11:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 1875.708437] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 1875.721580] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 1875.721591] sdb: sdb1
[ 1875.724180] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 1875.724189] sd 11:0:0:0: [sdb] Attached SCSI removable disk
sbarde@sbarde:~$
magozulinux fuse non ce l'ho, ma cosa sarebbe e a cosa servirebbe???
- magozurlinux
- Accecante Asceta

- Messaggi: 25019
- Iscrizione: mercoledì 17 marzo 2010, 17:44
- Desktop: xubuntu
- Distribuzione: Xubuntu 22.04.3 LTS x86_64
- Sesso: Maschile
- Località: Pisa
Re: [Usb] Ubuntu 9.10 si blocca durante il trasferimento da penna USB
Ciao,
fuse è un modulo per le porte usb.
Ho notato che nelle versioni precedenti a Ubuntu 9.04, fuse veniva caricato durante il boot, il nome-utente veniva assegnato a fuse, così le porte usb funzionavano senza problemi.
Recentemente ho cambiato computer, ho installato Ubuntu 9.04; due porte usb posteriori non funzionavano, ho controllato fuse e non ero assegnato al gruppo fuse; così da terminale ho dato questo comando: sudo adduser nome-utente fuse, poi ho riavviato, ho messo una penna dati usb nella porta usb posteriore che non funzionava, mi ha montato la penna dati usb, visualizzandone il contenuto.

fuse è un modulo per le porte usb.
Ho notato che nelle versioni precedenti a Ubuntu 9.04, fuse veniva caricato durante il boot, il nome-utente veniva assegnato a fuse, così le porte usb funzionavano senza problemi.
Recentemente ho cambiato computer, ho installato Ubuntu 9.04; due porte usb posteriori non funzionavano, ho controllato fuse e non ero assegnato al gruppo fuse; così da terminale ho dato questo comando: sudo adduser nome-utente fuse, poi ho riavviato, ho messo una penna dati usb nella porta usb posteriore che non funzionava, mi ha montato la penna dati usb, visualizzandone il contenuto.
Re: [Usb] Ubuntu 9.10 si blocca durante il trasferimento da penna USB
ciao magozurlinux
l'ho appena installato fuse come mi avevi consigliato già qui: http://forum.ubuntu-it.org/viewtopic.php?t=383390
ma nada, dopo aver riavviato la penna non me l'ha nemmeno letta la prima volta cosa che solitamente fà (anche se non sempre) e per il mouse ho aggiunto un altra riga a /etc/modules consigliata da bo462 e non è cambiato nulla è andato il topo appena attaccato poi l'ho staccato e riattaccato e niente non è vitale ma come al solito la lucetta sotto è accesa ma muovendolo non dà segni di vita....
grazie per la tua spiegazione
l'ho appena installato fuse come mi avevi consigliato già qui: http://forum.ubuntu-it.org/viewtopic.php?t=383390
ma nada, dopo aver riavviato la penna non me l'ha nemmeno letta la prima volta cosa che solitamente fà (anche se non sempre) e per il mouse ho aggiunto un altra riga a /etc/modules consigliata da bo462 e non è cambiato nulla è andato il topo appena attaccato poi l'ho staccato e riattaccato e niente non è vitale ma come al solito la lucetta sotto è accesa ma muovendolo non dà segni di vita....
grazie per la tua spiegazione
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 3 ospiti