[NVidia] RISOLUZIONE VIDEO
[NVidia] RISOLUZIONE VIDEO
ciao ragazzi, volevo chiedere una cosa, ho un portatile sony vaio modello vgn-fz21z che supporta la risoluzione in full hd ( 1920x1080 )
ubuntu 10.04 mi setta i driver perfettamente ma al massimo come risoluzione mi da 1280x800, ho letto da qualche parte che forse modificando lo xorg si riesce a cambiare, potete aiutarmi ?? come devo fare??
grazie..
ubuntu 10.04 mi setta i driver perfettamente ma al massimo come risoluzione mi da 1280x800, ho letto da qualche parte che forse modificando lo xorg si riesce a cambiare, potete aiutarmi ?? come devo fare??
grazie..
- m3nhir
- Entusiasta Emergente

- Messaggi: 2291
- Iscrizione: mercoledì 31 dicembre 2008, 18:48
- Desktop: gnome-shell
- Distribuzione: Ubuntu 12.04.4 LTS x86_64
Re: [NVidia] RISOLUZIONE VIDEO
installa se non lo hai gia fatto "nvidia-settings" lo trovi nei repository
dopo lo lanci con i permessi di amministratore
setti il tuo monitor e la risoluzione appropriata, e fai salvare il tutto facendo riscrivere l'xorg.conf (c'è un tasto apposito)
cosi salverà le impostazioni che ritroverai al prossimo riavvio.
dopo lo lanci con i permessi di amministratore
Codice: Seleziona tutto
sudo nvidia-settingscosi salverà le impostazioni che ritroverai al prossimo riavvio.
Chi sa ascoltare non soltanto è simpatico a tutti , ma dopo un pò finisce con l'imparare qualcosa.
-Wilson Mizner- Linux User # 207701 Ubuntu User # 27508
-Wilson Mizner- Linux User # 207701 Ubuntu User # 27508
Re: [NVidia] RISOLUZIONE VIDEO
si ce lo installato, ma nel monitor mi da " nvidia default flat panel" e come risoluzione massima mi da 1280x800...
- m3nhir
- Entusiasta Emergente

- Messaggi: 2291
- Iscrizione: mercoledì 31 dicembre 2008, 18:48
- Desktop: gnome-shell
- Distribuzione: Ubuntu 12.04.4 LTS x86_64
Re: [NVidia] RISOLUZIONE VIDEO
se hai il cd del monitor (oppure scarica il driver e tutte le specifiche dal sito) fai caricare ad nvidia-settings
inf ondo alla lista a sinistra della schermata di avvio di nvidia-settings selezioni la voce corrispondente al monitor e clicchi su
Aquire EDID e gli fai caricare il file da cd o da cartella dove lo hai scaricato.
Cosi il programma acquisirà i settaggi corretti per il tuo monitor.
inf ondo alla lista a sinistra della schermata di avvio di nvidia-settings selezioni la voce corrispondente al monitor e clicchi su
Aquire EDID e gli fai caricare il file da cd o da cartella dove lo hai scaricato.
Cosi il programma acquisirà i settaggi corretti per il tuo monitor.
Chi sa ascoltare non soltanto è simpatico a tutti , ma dopo un pò finisce con l'imparare qualcosa.
-Wilson Mizner- Linux User # 207701 Ubuntu User # 27508
-Wilson Mizner- Linux User # 207701 Ubuntu User # 27508
Re: [NVidia] RISOLUZIONE VIDEO
marce_one ha scritto: si ce lo installato, ma nel monitor mi da " nvidia default flat panel" e come risoluzione massima mi da 1280x800...
Codice: Seleziona tutto
cat /etc/X11/xorg.confRe: [NVidia] RISOLUZIONE VIDEO
cat: /etc/x11/xorg.conf: Nessun file o directory
questo è quello che esce...
grazie ancora ragazzi...ce la faro...
questo è quello che esce...
grazie ancora ragazzi...ce la faro...
Re: [NVidia] RISOLUZIONE VIDEO
La X è grande
Re: [NVidia] RISOLUZIONE VIDEO
ops sorry
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Default Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
ecco cosa esce
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Default Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
ecco cosa esce
Re: [NVidia] RISOLUZIONE VIDEO
apri sistema»amministrazione»nvidia x server settings
Clicca su save to x..., lega il flag da merge, allarga i dettagli e posta tutto.
Clicca su save to x..., lega il flag da merge, allarga i dettagli e posta tutto.
Re: [NVidia] RISOLUZIONE VIDEO
quando clicco save to esce questo
Failed to parse existing X config file '/etc/X11/xorg.conf'!
il flag merge è grigio non cliccabile
Failed to parse existing X config file '/etc/X11/xorg.conf'!
il flag merge è grigio non cliccabile
Re: [NVidia] RISOLUZIONE VIDEO
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Nvidia Default Flat Panel"
HorizSync 29.0 - 50.0
VertRefresh 0.0 - 61.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
hide view mi da questo
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Nvidia Default Flat Panel"
HorizSync 29.0 - 50.0
VertRefresh 0.0 - 61.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
hide view mi da questo
Re: [NVidia] RISOLUZIONE VIDEO
Codice: Seleziona tutto
gksu gedit /etc/X11/xorg.confCodice: Seleziona tutto
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Option "Xinerama" "0"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Nvidia Default Flat Panel"
HorizSync 30.0 - 75.0
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GS"
Option "NoLogo" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1920x1080_60 +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Salva, chiudi e riavvia.
Re: [NVidia] RISOLUZIONE VIDEO
ok fatto, ma risoluzione sempre uguale...
Re: [NVidia] RISOLUZIONE VIDEO
Posta il file /var/log/Xorg.0.logmarce_one ha scritto: ok fatto, ma risoluzione sempre uguale...
Almeno capiamo per quale motivo non l'ha accettata.
Re: [NVidia] RISOLUZIONE VIDEO
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux Marcello 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=4e5a0bf6-a674-4137-b213-f13471450989 ro quiet splash
Build Date: 23 April 2010 05:11:50PM
xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington )
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 31 21:58:57 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81f0e80
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de
104d:9005 nVidia Corporation G86 [GeForce 8600M GS] rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 195.36.24 Thu Apr 22 10:38:29 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 195.36.24 Thu Apr 22 09:34:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0; nvidia-auto-select +0+0"
(**) May 31 21:58:58 NVIDIA(0): Enabling RENDER acceleration
(II) May 31 21:58:58 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) May 31 21:58:58 NVIDIA(0): enabled.
(II) May 31 21:58:59 NVIDIA(0): NVIDIA GPU GeForce 8600M GS (G86) at PCI:1:0:0 (GPU-0)
(--) May 31 21:58:59 NVIDIA(0): Memory: 524288 kBytes
(--) May 31 21:58:59 NVIDIA(0): VideoBIOS: 60.86.45.00.19
(II) May 31 21:58:59 NVIDIA(0): Detected PCI Express Link width: 16X
(--) May 31 21:58:59 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) May 31 21:58:59 NVIDIA(0): Connected display device(s) on GeForce 8600M GS at PCI:1:0:0:
(--) May 31 21:58:59 NVIDIA(0): Nvidia Default Flat Panel (DFP-0)
(--) May 31 21:58:59 NVIDIA(0): Nvidia Default Flat Panel (DFP-0): 330.0 MHz maximum pixel
(--) May 31 21:58:59 NVIDIA(0): clock
(--) May 31 21:58:59 NVIDIA(0): Nvidia Default Flat Panel (DFP-0): Internal Dual Link LVDS
(II) May 31 21:58:59 NVIDIA(0): Assigned Display Device: DFP-0
(WW) May 31 21:58:59 NVIDIA(0): No valid modes for "1920x1080_60+0+0"; removing.
(II) May 31 21:58:59 NVIDIA(0): Validated modes:
(II) May 31 21:58:59 NVIDIA(0): "nvidia-auto-select+0+0"
(II) May 31 21:58:59 NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) May 31 21:59:00 NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
(--) May 31 21:59:00 NVIDIA(0): option
(==) May 31 21:59:00 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) May 31 21:59:00 NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
(II) May 31 21:59:00 NVIDIA(0): Initialized GPU GART.
(WW) May 31 21:59:00 NVIDIA(0): ACPI: Error: Unable to find the DOS (Enable/Disable output
(WW) May 31 21:59:00 NVIDIA(0): switching) file path under /proc/acpi/video. The NVIDIA X
(WW) May 31 21:59:00 NVIDIA(0): driver will not be able to respond to ACPI display change
(WW) May 31 21:59:00 NVIDIA(0): hotkey events.
(WW) May 31 21:59:00 NVIDIA(0): ACPI: Error: Unable to find the brightness file path under
(WW) May 31 21:59:00 NVIDIA(0): /proc/acpi/video. The NVIDIA X driver will not be able to
(WW) May 31 21:59:00 NVIDIA(0): respond to ACPI brightness change hotkey events.
(II) May 31 21:59:00 NVIDIA(0): Setting mode "nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) May 31 21:59:00 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) May 31 21:59:00 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event4)
(**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Sony Vaio Keys: always reports core events
(**) Sony Vaio Keys: Device: "/dev/input/event4"
(II) Sony Vaio Keys: Found keys
(II) Sony Vaio Keys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "it"
(II) XKB: reuse xkmfile /var/lib/xkb/server-35DF0DEC488035CD7337E5EF69F018BFAFADCAC5.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "it"
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event10)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HID 044e:3013 (/dev/input/event6)
(**) HID 044e
Applying InputClass "evdev keyboard catchall"
(**) HID 044e
always reports core events
(**) HID 044e
Device: "/dev/input/event6"
(II) HID 044e
Found keys
(II) HID 044e
Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 044e:3013" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "it"
(II) config/udev: Adding input device HID 044e:3012 (/dev/input/event7)
(**) HID 044e
Applying InputClass "evdev pointer catchall"
(**) HID 044e
always reports core events
(**) HID 044e
Device: "/dev/input/event7"
(II) HID 044e
Found 3 mouse buttons
(II) HID 044e
Found relative axes
(II) HID 044e
Found x and y relative axes
(II) HID 044e
Configuring as mouse
(**) HID 044e
YAxisMapping: buttons 4 and 5
(**) HID 044e
EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 044e:3012" (type: MOUSE)
(II) HID 044e
initialized for relative axes.
(II) config/udev: Adding input device HID 044e:3012 (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "it"
(II) config/udev: Adding input device PS/2 Mouse (/dev/input/event8)
(**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event8"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found relative axes
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) PS/2 Mouse: initialized for relative axes.
(II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event9)
(**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev pointer catchall"
(**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
(**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event9"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 0
(**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
(**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse4)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux Marcello 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=4e5a0bf6-a674-4137-b213-f13471450989 ro quiet splash
Build Date: 23 April 2010 05:11:50PM
xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington )
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 31 21:58:57 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81f0e80
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 195.36.24 Thu Apr 22 10:38:29 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 195.36.24 Thu Apr 22 09:34:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0; nvidia-auto-select +0+0"
(**) May 31 21:58:58 NVIDIA(0): Enabling RENDER acceleration
(II) May 31 21:58:58 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) May 31 21:58:58 NVIDIA(0): enabled.
(II) May 31 21:58:59 NVIDIA(0): NVIDIA GPU GeForce 8600M GS (G86) at PCI:1:0:0 (GPU-0)
(--) May 31 21:58:59 NVIDIA(0): Memory: 524288 kBytes
(--) May 31 21:58:59 NVIDIA(0): VideoBIOS: 60.86.45.00.19
(II) May 31 21:58:59 NVIDIA(0): Detected PCI Express Link width: 16X
(--) May 31 21:58:59 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) May 31 21:58:59 NVIDIA(0): Connected display device(s) on GeForce 8600M GS at PCI:1:0:0:
(--) May 31 21:58:59 NVIDIA(0): Nvidia Default Flat Panel (DFP-0)
(--) May 31 21:58:59 NVIDIA(0): Nvidia Default Flat Panel (DFP-0): 330.0 MHz maximum pixel
(--) May 31 21:58:59 NVIDIA(0): clock
(--) May 31 21:58:59 NVIDIA(0): Nvidia Default Flat Panel (DFP-0): Internal Dual Link LVDS
(II) May 31 21:58:59 NVIDIA(0): Assigned Display Device: DFP-0
(WW) May 31 21:58:59 NVIDIA(0): No valid modes for "1920x1080_60+0+0"; removing.
(II) May 31 21:58:59 NVIDIA(0): Validated modes:
(II) May 31 21:58:59 NVIDIA(0): "nvidia-auto-select+0+0"
(II) May 31 21:58:59 NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) May 31 21:59:00 NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
(--) May 31 21:59:00 NVIDIA(0): option
(==) May 31 21:59:00 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) May 31 21:59:00 NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
(II) May 31 21:59:00 NVIDIA(0): Initialized GPU GART.
(WW) May 31 21:59:00 NVIDIA(0): ACPI: Error: Unable to find the DOS (Enable/Disable output
(WW) May 31 21:59:00 NVIDIA(0): switching) file path under /proc/acpi/video. The NVIDIA X
(WW) May 31 21:59:00 NVIDIA(0): driver will not be able to respond to ACPI display change
(WW) May 31 21:59:00 NVIDIA(0): hotkey events.
(WW) May 31 21:59:00 NVIDIA(0): ACPI: Error: Unable to find the brightness file path under
(WW) May 31 21:59:00 NVIDIA(0): /proc/acpi/video. The NVIDIA X driver will not be able to
(WW) May 31 21:59:00 NVIDIA(0): respond to ACPI brightness change hotkey events.
(II) May 31 21:59:00 NVIDIA(0): Setting mode "nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) May 31 21:59:00 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) May 31 21:59:00 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event4)
(**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Sony Vaio Keys: always reports core events
(**) Sony Vaio Keys: Device: "/dev/input/event4"
(II) Sony Vaio Keys: Found keys
(II) Sony Vaio Keys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "it"
(II) XKB: reuse xkmfile /var/lib/xkb/server-35DF0DEC488035CD7337E5EF69F018BFAFADCAC5.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "it"
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event10)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HID 044e:3013 (/dev/input/event6)
(**) HID 044e
(**) HID 044e
(**) HID 044e
(II) HID 044e
(II) HID 044e
(II) XINPUT: Adding extended input device "HID 044e:3013" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "it"
(II) config/udev: Adding input device HID 044e:3012 (/dev/input/event7)
(**) HID 044e
(**) HID 044e
(**) HID 044e
(II) HID 044e
(II) HID 044e
(II) HID 044e
(II) HID 044e
(**) HID 044e
(**) HID 044e
(II) XINPUT: Adding extended input device "HID 044e:3012" (type: MOUSE)
(II) HID 044e
(II) config/udev: Adding input device HID 044e:3012 (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "it"
(II) config/udev: Adding input device PS/2 Mouse (/dev/input/event8)
(**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event8"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found relative axes
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) PS/2 Mouse: initialized for relative axes.
(II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event9)
(**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev pointer catchall"
(**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
(**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event9"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 0
(**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
(**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse4)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
Re: [NVidia] RISOLUZIONE VIDEO
Option "metamodes" "1920x1080_60 +0+0; nvidia-auto-select +0+0"
non gli piace, prova cone:
Option "metamodes" "1920x1080 +0+0; nvidia-auto-select +0+0"
Se sei sicuro che il tuo monitor supporti quella risoluzione.
Ti ha rimesso 1280x800:
non gli piace, prova cone:
Option "metamodes" "1920x1080 +0+0; nvidia-auto-select +0+0"
Se sei sicuro che il tuo monitor supporti quella risoluzione.
Ti ha rimesso 1280x800:
Codice: Seleziona tutto
(**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0; nvidia-auto-select +0+0"
(**) May 31 21:58:58 NVIDIA(0): Enabling RENDER acceleration
(II) May 31 21:58:58 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) May 31 21:58:58 NVIDIA(0): enabled.
(II) May 31 21:58:59 NVIDIA(0): NVIDIA GPU GeForce 8600M GS (G86) at PCI:1:0:0 (GPU-0)
(--) May 31 21:58:59 NVIDIA(0): Memory: 524288 kBytes
(--) May 31 21:58:59 NVIDIA(0): VideoBIOS: 60.86.45.00.19
(II) May 31 21:58:59 NVIDIA(0): Detected PCI Express Link width: 16X
(--) May 31 21:58:59 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) May 31 21:58:59 NVIDIA(0): Connected display device(s) on GeForce 8600M GS at PCI:1:0:0:
(--) May 31 21:58:59 NVIDIA(0): Nvidia Default Flat Panel (DFP-0)
(--) May 31 21:58:59 NVIDIA(0): Nvidia Default Flat Panel (DFP-0): 330.0 MHz maximum pixel
(--) May 31 21:58:59 NVIDIA(0): clock
(--) May 31 21:58:59 NVIDIA(0): Nvidia Default Flat Panel (DFP-0): Internal Dual Link LVDS
(II) May 31 21:58:59 NVIDIA(0): Assigned Display Device: DFP-0
(WW) May 31 21:58:59 NVIDIA(0): No valid modes for "1920x1080_60+0+0"; removing.
(II) May 31 21:58:59 NVIDIA(0): Validated modes:
(II) May 31 21:58:59 NVIDIA(0): "nvidia-auto-select+0+0"
(II) May 31 21:58:59 NVIDIA(0): Virtual screen size determined to be 1280 x 800Re: [NVidia] RISOLUZIONE VIDEO
Ho cercato le caratteristiche tecniche del tuo portatile e monta un monitor 15,4" 1280x800.
I 1920x1080 sei sicuro di averli visti nel monitor interno?
I 1920x1080 sei sicuro di averli visti nel monitor interno?
Re: [NVidia] RISOLUZIONE VIDEO
si ha anche il lettore masterizzatore blu ray disc, poi ce un bel adesivo con scritto full hd 1080
Re: [NVidia] RISOLUZIONE VIDEO
L'adesivo lo ha (aveva, visto che li stacco tutti) pure il mio, ma il monitor interno è HD (1366x768), il full HD è riferito all'uscita hdmi.marce_one ha scritto: si ha anche il lettore masterizzatore blu ray disc, poi ce un bel adesivo con scritto full hd 1080
Puoi postare la sigla completa? Non trovo nessun modello che abbia 1920x1080, che per un 15" è quantomeno inusabile, visto che i caratteri diventerebbero microscopici.
Re: [NVidia] RISOLUZIONE VIDEO
Ciao a tutti,
vorrei portare la risoluzione a 1400x1050 su un portatile da 15 con la stessa scheda. Come faccio a vedere che risoluzione massima supporta?
ps: per le schede invidia ci sono moltissimi driver: current, nuveau, glx,... come si fa a capire qual'è il migliore per il proprio pc? (al momento uso i current 173 versione beta installati da repo secondo la guida di Guido...).
Grazie
vorrei portare la risoluzione a 1400x1050 su un portatile da 15 con la stessa scheda. Come faccio a vedere che risoluzione massima supporta?
Codice: Seleziona tutto
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 256.29 (buildd@lawrencium) Sun May 30 21:38:22 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "AUO"
HorizSync 30.0 - 75.0
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GS"
Option "NoLogo" "True"
EndSection
Section "Screen"
# Removed Option "metamodes" "nvidia-auto-select @1400x1050 +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Grazie
Sono uno Zero member!
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 4 ospiti

