Pagina 1 di 2
[RISOLTO]Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: giovedì 3 giugno 2010, 21:49
da Nede
E' giunto il momento di risolvere questo problema che mi porto avanti da un anno! Non mi ha mai funzionato la scheda di rete integrata dalla 9.04 alla 10.04, compresa lts 8.04 versione server.
Ho risolto in passato usando una scheda di rete pci d-link, solo che ora ho bisogno di liberare lo slot pci!
Il problema è che rimane spenta l'interfaccia, sia con dhcp, sia con ip statici. Ifconfig è configurato giusto, lspi riconosce la scheda! Bho?
Codice: Seleziona tutto
milanese@milanese-casa:~$ lspci
00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 200 Host Bridge (rev 01)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:19.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
00:1c.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:1d.0 Audio device: ALi Corporation High Definition Audio/AC'97 Host Controller
00:1e.0 ISA bridge: ALi Corporation PCI to LPC Controller (rev 31)
00:1e.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:1f.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
00:1f.1 RAID bus controller: ALi Corporation ULi 5287 SATA (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GT215 [GeForce GT 240] (rev a2)
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
06:11.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
06:11.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
06:11.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
06:11.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
06:12.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
06:15.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
milanese@milanese-casa:~$
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: giovedì 3 giugno 2010, 23:55
da fabisa
posta
e
vediamo se carica il driver.
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 20:04
da Nede
Ma certamente! Grazie per avermi messo in "lista" (b2b)
sudo lshw -C network
Codice: Seleziona tutto
milanese@milanese-casa:~$ sudo lshw -C network
[sudo] password for milanese:
*-network:0
description: Ethernet interface
product: RTL8139 Ethernet
vendor: D-Link System Inc
physical id: 12
bus info: pci@0000:06:12.0
logical name: eth1
version: 10
serial: 00:24:01:3b:7d:ba
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.254 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
resources: irq:22 ioport:c800(size=256) memory:fe9ffc00-fe9ffcff
*-network:1
description: Ethernet interface
product: 88E8001 Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 15
bus info: pci@0000:06:15.0
logical name: eth0
version: 13
serial: 00:16:ec:17:ce:e6
capacity: 1GB/s
width: 32 bits
clock: 66MHz
capabilities: pm vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=skge driverversion=1.13 firmware=N/A latency=64 link=no maxlatency=31 mingnt=23 multicast=yes port=twisted pair
resources: irq:20 memory:fe9ec000-fe9effff ioport:c400(size=256) memory:fe9c0000-fe9dffff(prefetchable)
milanese@milanese-casa:~$
lsmod
Codice: Seleziona tutto
milanese@milanese-casa:~$ lsmod
Module Size Used by
btrfs 458906 0
zlib_deflate 19568 1 btrfs
crc32c 2519 1
libcrc32c 875 1 btrfs
ufs 72774 0
qnx4 6484 0
hfsplus 70800 0
hfs 40754 0
minix 25197 0
ntfs 94919 0
vfat 8901 0
msdos 6392 0
fat 47767 2 vfat,msdos
jfs 172650 0
xfs 513712 0
exportfs 3437 1 xfs
reiserfs 225539 0
snd_hda_codec_nvhdmi 12658 1
snd_hda_codec_realtek 216061 1
binfmt_misc 6587 1
cx22702 5032 1
isl6421 1349 1
cx24116 14429 1
cx88_dvb 19413 0
cx88_vp3054_i2c 1808 1 cx88_dvb
videobuf_dvb 5175 1 cx88_dvb
wm8775 2873 1
dvb_core 86142 2 cx88_dvb,videobuf_dvb
tuner_simple 13577 2
tuner_types 14233 1 tuner_simple
tda9887 9589 1
tda8290 12092 0
tuner 20412 2
snd_hda_intel 20895 1
snd_hda_codec 86936 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_seq_dummy 1434 0
snd_hwdep 5604 1 snd_hda_codec
snd_seq_oss 27242 0
snd_pcm_oss 34539 0
snd_mixer_oss 13897 1 snd_pcm_oss
snd_seq_midi 4557 0
snd_pcm 71806 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
cx8800 27220 0
cx8802 12841 1 cx88_dvb
snd_rawmidi 19077 1 snd_seq_midi
cx88xx 72756 3 cx88_dvb,cx8800,cx8802
ir_common 38875 1 cx88xx
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
i2c_algo_bit 5028 2 cx88_vp3054_i2c,cx88xx
tveeprom 11102 1 cx88xx
snd_seq 47530 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 18646 2 snd_pcm,snd_seq
v4l2_common 15431 4 wm8775,tuner,cx8800,cx88xx
videodev 34361 5 wm8775,tuner,cx8800,cx88xx,v4l2_common
v4l1_compat 13251 1 videodev
videobuf_dma_sg 10814 4 cx88_dvb,cx8800,cx8802,cx88xx
snd_seq_device 5988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
videobuf_core 16356 5 videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg
nvidia 9933456 28
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
btcx_risc 3624 3 cx8800,cx8802,cx88xx
ati_agp 5094 0
snd 56303 17 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_seq_dummy,snd_hwdep,snd_seq_oss,snd_pcm_oss,snd_mixer_oss,snd_seq_midi,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
vga16fb 11385 1
soundcore 6620 1 snd
snd_page_alloc 7172 2 snd_hda_intel,snd_pcm
shpchp 28884 0
i2c_ali15x3 5114 0
i2c_ali1535 4789 0
agpgart 31788 2 nvidia,ati_agp
vgastate 8961 1 vga16fb
psmouse 63245 0
lp 7028 0
ppdev 5259 0
serio_raw 3978 0
parport_pc 26250 1
led_class 2864 0
joydev 8708 0
parport 32635 3 lp,ppdev,parport_pc
8139too 18673 0
usbhid 36174 0
hid 67032 1 usbhid
usb_storage 39457 0
floppy 53080 0
skge 35779 0
mii 4381 1 8139too
sata_uli 2561 2
pata_ali 7900 0
milanese@milanese-casa:~$
Ci capisci qualche cosa?
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 21:30
da fabisa
la tua scheda marvell utilizza il modulo skge che è caricato, quindi dovrebbe funzionare,
posta anche
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 21:34
da Nede
ifconfig
Codice: Seleziona tutto
milanese@milanese-casa:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:16:ec:17:ce:e6
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:1000
Byte RX:0 (0.0 B) Byte TX:0 (0.0 B)
Interrupt:20
eth1 Link encap:Ethernet HWaddr 00:24:01:3b:7d:ba
indirizzo inet:192.168.1.254 Bcast:192.168.1.255 Maschera:255.255.255.0
indirizzo inet6: fe80::224:1ff:fe3b:7dba/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:53532 errors:0 dropped:0 overruns:0 frame:0
TX packets:31114 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:1000
Byte RX:72485382 (72.4 MB) Byte TX:8229069 (8.2 MB)
Interrupt:22 Indirizzo base:0xc800
lo Link encap:Loopback locale
indirizzo inet:127.0.0.1 Maschera:255.0.0.0
indirizzo inet6: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:0
Byte RX:480 (480.0 B) Byte TX:480 (480.0 B)
milanese@milanese-casa:~$
da notare che ho il cavo attaccato ma l'interfaccia è spenta. Inoltre non ho settato nessun indirizzo ip ma se lo faccio non cambia nulla.
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 21:48
da fabisa
la tua interfaccia per la marvell è eth0, prova cosi
chiudi eth1
chiedi la connessione al router per eth0
se va a buon fine
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 22:01
da Nede
Ahi! Non va..
Codice: Seleziona tutto
milanese@milanese-casa:~$ sudo ifconfig eth1 down
[sudo] password for milanese:
milanese@milanese-casa:~$ sudo dhclient eth0
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/eth0/00:16:ec:17:ce:e6
Sending on LPF/eth0/00:16:ec:17:ce:e6
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 2
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
milanese@milanese-casa:~$
Mi rimane comunque strano che fisicamente è spenta l'interfaccia! Non vedo led ne sulla porta eth fisica del pc ne sullo switch!
Sono sicuro del cavo e dello switch, su win (2 anni fa) funzionava. All'avvio del pc i led sulla porta eth si accendono ma poi si spengono subito........
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 22:05
da fabisa
quale è l'indirizzo del tuo router?
posta
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 22:09
da Nede
192.168.1.1 comunque....
Codice: Seleziona tutto
milanese@milanese-casa:~$ route -n
Tabella di routing IP del kernel
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1
milanese@milanese-casa:~$
Il router è a posto a livello di server dhcp, nel senso che in dhcp funziona sulla eth1(anche se poi ho configurato ip statici), sul wireless attraverso l'access point configurato in maniera da prendere il dhcp dal router (trasparent) ai 2 telefoni voip aladino, alla wii....
P.S: Ho messo alcune informazioni nel mio post precedente....
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 22:15
da fabisa
potrebbe anche essere essere un problema con il driver, ma farei altri tentativi,
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 22:18
da Nede
Mi fermo subito:
Codice: Seleziona tutto
milanese@milanese-casa:~$ sudo route add default gw 192.168.1.1 eth0
SIOCADDRT: Nessun processo
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 22:29
da fabisa
fai una ricerca sul forum o con google con i dati sulla tua scheda, mi sa che devi installare i driver del produttore vedi
http://www.marvell.com/support.html
per l'installazione fai riferimento al file "readme" contenuto nel pacchetto che scarichi.
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 22:31
da Nede
Ok, indago! Per ora grazie! Mi faccio vivo qui!!!!
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: venerdì 4 giugno 2010, 23:16
da fabisa
ho dato una occhiata, e ho visto che il driver che ti fa installare la marvell per linux si chiama sk98lin.
non so se questo driver è presente nel kernell, fai una prova
scarichi il modulo caricato
carichi il modulo nuovo
controlli se ti ha caricato il modulo.
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: sabato 5 giugno 2010, 0:26
da Nede
Forse l'ho caricato seguendo questa guida
http://swiss.ubuntuforums.org/showthread.php?t=1330283&page=2 ultimo post.
Guarda un po:
Codice: Seleziona tutto
milanese@milanese-casa:~$ sudo modprobe -r skge
[sudo] password for milanese:
milanese@milanese-casa:~$ sudo modprobe -i sk98lin
milanese@milanese-casa:~$ lsmod | grep sk98lin
sk98lin 163093 1
milanese@milanese-casa:~$
Poi:
Codice: Seleziona tutto
milanese@milanese-casa:~$ sudo lshw -C network
PCI (sysfs)
*-network:0
description: Ethernet interface
product: RTL8139 Ethernet
vendor: D-Link System Inc
physical id: 12
bus info: pci@0000:06:12.0
logical name: eth1
version: 10
serial: 00:24:01:3b:7d:ba
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.219 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
resources: irq:22 ioport:c800(size=256) memory:fe9ffc00-fe9ffcff
*-network:1
description: Ethernet interface
product: 88E8001 Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 15
bus info: pci@0000:06:15.0
logical name: eth0
version: 13
serial: 00:16:ec:17:ce:e6
capacity: 1GB/s
width: 32 bits
clock: 66MHz
capabilities: pm vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sk98lin driverversion=10.85.3.3 (03) firmware=N/A latency=64 link=no maxlatency=31 mingnt=23 multicast=yes port=twisted pair
resources: irq:20 memory:fe9ec000-fe9effff ioport:c400(size=256) memory:fe9c0000-fe9dffff(prefetchable)
milanese@milanese-casa:~$
milanese@milanese-casa:~$ lsmod
Module Size Used by
sk98lin 163093 1
snd_hda_codec_nvhdmi 12658 1
binfmt_misc 6587 1
snd_hda_codec_realtek 216061 1
cx22702 4936 1
isl6421 1349 1
cx24116 14231 1
cx88_dvb 20657 0
cx88_vp3054_i2c 1808 1 cx88_dvb
videobuf_dvb 5096 1 cx88_dvb
wm8775 2937 1
dvb_core 85997 2 cx88_dvb,videobuf_dvb
tuner_simple 13241 2
tuner_types 14233 1 tuner_simple
tda9887 9518 1
snd_hda_intel 20895 2
tda8290 12149 0
snd_hda_codec 86936 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel
tuner 20386 2
snd_hwdep 5604 1 snd_hda_codec
snd_seq_dummy 1434 0
snd_pcm_oss 34539 0
snd_mixer_oss 13897 1 snd_pcm_oss
cx8800 27226 0
cx8802 12448 1 cx88_dvb
snd_pcm 71806 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_oss 27242 0
snd_seq_midi 4557 0
cx88xx 71938 3 cx88_dvb,cx8800,cx8802
snd_rawmidi 19077 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
ir_common 42315 1 cx88xx
snd_seq 47530 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
i2c_algo_bit 5028 2 cx88_vp3054_i2c,cx88xx
tveeprom 11038 1 cx88xx
snd_timer 18646 2 snd_pcm,snd_seq
ir_core 6142 2 cx88xx,ir_common
snd_seq_device 5988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
v4l2_common 16326 4 wm8775,tuner,cx8800,cx88xx
fbcon 35102 71
videodev 36281 5 wm8775,tuner,cx8800,cx88xx,v4l2_common
tileblit 2031 1 fbcon
v4l1_compat 13251 1 videodev
videobuf_dma_sg 10814 4 cx88_dvb,cx8800,cx8802,cx88xx
snd 56303 19 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_dummy,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
btcx_risc 3624 3 cx8800,cx8802,cx88xx
videobuf_core 16174 5 videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg
ppdev 5259 0
font 7557 1 fbcon
bitblit 4707 1 fbcon
i2c_ali15x3 5114 0
parport_pc 26250 1
soundcore 6620 1 snd
lp 7028 0
softcursor 1189 1 bitblit
shpchp 28884 0
parport 32635 3 ppdev,parport_pc,lp
snd_page_alloc 7172 2 snd_hda_intel,snd_pcm
i2c_ali1535 4789 0
nvidia 9933456 28
vga16fb 11385 1
ati_agp 5094 0
vgastate 8961 1 vga16fb
agpgart 31788 2 nvidia,ati_agp
joydev 8708 0
psmouse 63245 0
serio_raw 3978 0
led_class 2864 0
8139too 18673 0
usbhid 36174 0
hid 67032 1 usbhid
floppy 53080 0
mii 4381 1 8139too
sata_uli 2561 2
pata_ali 7900 0
milanese@milanese-casa:~$
Indovina? Non va!!! :'(
P.S.: Vada a nanna se no compro un pc nuovo online.....e chi la sente poi la bestia di mia moglie!!!
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: sabato 5 giugno 2010, 0:53
da fabisa
il driver è cambiato,
posta
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: sabato 5 giugno 2010, 1:37
da yves
Controlla se hai installato "ethtool", altrimenti:
quindi vedi se carica il suo driver:
se vedi che è caricato prova a solleticarla cosi:
dato quel comando su eth0 dovrebbe cominciare a lampeggiare il led.
per tutto il resto

Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: sabato 5 giugno 2010, 21:55
da Nede
fabisa:
ifconfig
Codice: Seleziona tutto
milanese@milanese-casa:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:16:ec:17:ce:e6
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:1000
Byte RX:0 (0.0 B) Byte TX:0 (0.0 B)
Interrupt:20 Memoria:fe9ec000-0
eth1 Link encap:Ethernet HWaddr 00:24:01:3b:7d:ba
indirizzo inet:192.168.1.254 Bcast:192.168.1.255 Maschera:255.255.255.0
indirizzo inet6: fe80::224:1ff:fe3b:7dba/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4507 errors:0 dropped:0 overruns:0 frame:0
TX packets:8083 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:1000
Byte RX:272995 (272.9 KB) Byte TX:10938623 (10.9 MB)
Interrupt:22 Indirizzo base:0xc800
lo Link encap:Loopback locale
indirizzo inet:127.0.0.1 Maschera:255.0.0.0
indirizzo inet6: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:0
Byte RX:480 (480.0 B) Byte TX:480 (480.0 B)
milanese@milanese-casa:~$
nm-tool
Codice: Seleziona tutto
milanese@milanese-casa:~$ nm-tool
NetworkManager Tool
State: connected
- Device: eth1 [Auto eth1] ----------------------------------------------------
Type: Wired
Driver: 8139too
State: connected
Default: yes
HW Address: 00:24:01:3B:7D:BA
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on
IPv4 Settings:
Address: 192.168.1.254
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1
DNS: 151.99.125.2
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: sk98lin
State: unavailable
Default: no
HW Address: 00:16:EC:17:CE:E6
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
milanese@milanese-casa:~$
milanese@milanese-casa:~$ nm-tool
NetworkManager Tool
State: connected
- Device: eth1 [Auto eth1] ----------------------------------------------------
Type: Wired
Driver: 8139too
State: connected
Default: yes
HW Address: 00:24:01:3B:7D:BA
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on
IPv4 Settings:
Address: 192.168.1.254
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1
DNS: 151.99.125.2
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: sk98lin
State: unavailable
Default: no
HW Address: 00:16:EC:17:CE:E6
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
milanese@milanese-casa:~$
yves
ho installato ethtool, posto ethtool -i eth0
Codice: Seleziona tutto
milanese@milanese-casa:~$ ethtool -i eth0
driver: sk98lin
version: 10.85.3.3 (03)
firmware-version: N/A
bus-info: 0000:06:15.0
milanese@milanese-casa:~$
sudo ethtool -p eth0
il comando effettivamente la fa lampeggiare per n attimo ma nessun cambiamento...
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: sabato 5 giugno 2010, 21:58
da yves
Manca il firmware:
[EDIT]
Che lampeggi è buon segno, ho trovato questi:
http://hardware4linux.info/module/skge/
http://hardware4linux.info/module/sk98lin/
da cosa si vede sembrano funzionare entrambi, do un occhiata in giro per capire la storia del firmware, se non lo trova non penso proprio possa mettersi a funzionare.
Re: Scheda di rete integrata 88E8001: è ora di risolvere!
Inviato: sabato 5 giugno 2010, 22:02
da Nede
L'avevo notato anche io, potrebbe essere quello il problema?