due hd due ubuntu, senza dialogo!!!
Inviato: lunedì 9 ottobre 2006, 13:41
Salve, sono in cerca di soluzioni non "onerose" per questa situazione
Premessa:
Ho due os ubuntu 6.06 in due HD diversi, sullo stesso pc javascript:void(0);
# lspcijavascript:void(0);
lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:09.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)
root@ubuntu:/home/antonio#
fdisk -ljavascript:void(0);
Disk /dev/sda: 80.0 GB, 80060424192 bytes
255 heads, 63 sectors/track, 9733 cylinders
Units = cilindri of 16065 * 512 = 8225280 bytes
Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 1 1019 8185086 83 Linux
/dev/sda2 1020 1143 996030 82 Linux swap / Solaris
/dev/sda3 1144 9733 68999175 83 Linux
Disk /dev/hda: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cilindri of 16065 * 512 = 8225280 bytes
Dispositivo Boot Start End Blocks Id System
/dev/hda1 * 1 9777 78533721 83 Linux
/dev/hda2 9778 9964 1502077+ 5 Esteso
/dev/hda5 9778 9964 1502046 82 Linux swap / Solaris
dmesg
javascript:void(0);
VADO in risorse del pc e clicco sulla icona dell'hard disk
errore: il dispositivo /dev/hda1 non è rimovibile
errore: impossibile eseguire pmount
Se provo a cambiare i permessi mi dice che non è possibile
Allora provo con disks-admin da root e comunque non riesco ad abilitare la lettura output:
** (disks-admin:3976): WARNING **: mount: il mount point nessuno non esiste ??? javascript:void(0);
Come va impostato il mount point? Quale riga di comado? serve anche creare un'apposita directory!??
Ho cercato in rete, probabilmente male, e non ho trovato nessuna soluzione. Ho evitato di fare tentativi perché con il pc ci lavoro e voglio evitare problemi che poi non ho il tempo di risolvere, mio malgrado. javascript:void(0);
Ecco anche spiegato il perche' dei due sistemi uguali. Ma il problema permane considerato che non riesco a trasferire dati fra gli HD.
Grazie per l'aiuto.javascript:void(0);
--=YUZA=--
Premessa:
Ho due os ubuntu 6.06 in due HD diversi, sullo stesso pc javascript:void(0);
# lspcijavascript:void(0);
lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:09.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)
root@ubuntu:/home/antonio#
fdisk -ljavascript:void(0);
Disk /dev/sda: 80.0 GB, 80060424192 bytes
255 heads, 63 sectors/track, 9733 cylinders
Units = cilindri of 16065 * 512 = 8225280 bytes
Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 1 1019 8185086 83 Linux
/dev/sda2 1020 1143 996030 82 Linux swap / Solaris
/dev/sda3 1144 9733 68999175 83 Linux
Disk /dev/hda: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cilindri of 16065 * 512 = 8225280 bytes
Dispositivo Boot Start End Blocks Id System
/dev/hda1 * 1 9777 78533721 83 Linux
/dev/hda2 9778 9964 1502077+ 5 Esteso
/dev/hda5 9778 9964 1502046 82 Linux swap / Solaris
dmesg
Codice: Seleziona tutto
[17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[17179569.184000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001fffb000 (usable)
[17179569.184000] BIOS-e820: 000000001fffb000 - 000000001ffff000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 131067
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 126971 pages, LIFO batch:31
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ASUS ) @ 0x000f5e20
[17179569.184000] ACPI: RSDT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffb000
[17179569.184000] ACPI: FADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffb0b2
[17179569.184000] ACPI: BOOT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffb030
[17179569.184000] ACPI: MADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffb058
[17179569.184000] ACPI: DSDT (v001 ASUS A7V600 0x00001000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[17179569.184000] Detected 1100.247 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.028000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179572.028000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179572.052000] Memory: 508844k/524268k available (1976k kernel code, 14804k reserved, 606k data, 288k init, 0k highmem)
[17179572.052000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.132000] Calibrating delay using timer specific routine.. 2202.66 BogoMIPS (lpj=4405325)
[17179572.132000] Security Framework v1.0.0 initialized
[17179572.132000] SELinux: Disabled at boot.
[17179572.132000] Mount-cache hash table entries: 512
[17179572.132000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179572.132000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179572.132000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179572.132000] CPU: L2 Cache: 512K (64 bytes/line)
[17179572.132000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179572.132000] mtrr: v2.0 (20020519)
[17179572.132000] CPU: AMD Athlon(TM) XP 2500+ stepping 00
[17179572.132000] Enabling fast FPU save and restore... done.
[17179572.132000] Enabling unmasked SIMD FPU exception support... done.
[17179572.132000] Checking 'hlt' instruction... OK.
[17179572.148000] checking if image is initramfs... it is
[17179573.088000] Freeing initrd memory: 6617k freed
[17179573.108000] ACPI: Looking for DSDT ... not found!
[17179573.112000] ENABLING IO-APIC IRQs
[17179573.112000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.256000] NET: Registered protocol family 16
[17179573.256000] EISA bus registered
[17179573.256000] ACPI: bus type pci registered
[17179573.256000] PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
[17179573.256000] PCI: Using configuration type 1
[17179573.256000] ACPI: Subsystem revision 20051216
[17179573.264000] ACPI: Interpreter enabled
[17179573.264000] ACPI: Using IOAPIC for interrupt routing
[17179573.264000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[17179573.264000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.264000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.268000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179573.268000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12)
[17179573.268000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12)
[17179573.268000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12)
[17179573.268000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled.
[17179573.268000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.268000] PCI: Probing PCI hardware (bus 00)
[17179573.268000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179573.280000] Boot video device is 0000:01:00.0
[17179573.280000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.280000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179573.292000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.292000] pnp: PnP ACPI init
[17179573.300000] pnp: PnP ACPI: found 16 devices
[17179573.300000] PnPBIOS: Disabled by ACPI PNP
[17179573.300000] PCI: Using ACPI for IRQ routing
[17179573.300000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179573.304000] pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
[17179573.304000] pnp: 00:01: ioport range 0xe800-0xe81f has been reserved
[17179573.304000] pnp: 00:0f: ioport range 0x290-0x297 has been reserved
[17179573.304000] pnp: 00:0f: ioport range 0x370-0x375 has been reserved
[17179573.304000] PCI: Bridge: 0000:00:01.0
[17179573.304000] IO window: disabled.
[17179573.304000] MEM window: e6000000-e76fffff
[17179573.304000] PREFETCH window: e7700000-efffffff
[17179573.304000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179573.304000] Simple Boot Flag at 0x3a set to 0x1
[17179573.304000] audit: initializing netlink socket (disabled)
[17179573.304000] audit(1160330805.304:1): initialized
[17179573.304000] VFS: Disk quotas dquot_6.5.1
[17179573.304000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.308000] Initializing Cryptographic API
[17179573.308000] io scheduler noop registered
[17179573.308000] io scheduler anticipatory registered
[17179573.308000] io scheduler deadline registered
[17179573.308000] io scheduler cfq registered
[17179573.308000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179573.308000] isapnp: Scanning for PnP cards...
[17179573.660000] isapnp: No Plug & Play device found
[17179573.680000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179573.684000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.684000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.684000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179573.684000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.684000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.684000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.684000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.688000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.688000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.688000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.688000] mice: PS/2 mouse device common for all mice
[17179573.688000] EISA: Probing bus 0 at eisa.0
[17179573.688000] EISA: Detected 0 cards.
[17179573.688000] NET: Registered protocol family 2
[17179573.712000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.732000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[17179573.732000] TCP established hash table entries: 32768 (order: 5, 131072 bytes)
[17179573.732000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[17179573.732000] TCP: Hash tables configured (established 32768 bind 32768)
[17179573.732000] TCP reno registered
[17179573.732000] TCP bic registered
[17179573.732000] NET: Registered protocol family 1
[17179573.732000] NET: Registered protocol family 8
[17179573.732000] NET: Registered protocol family 20
[17179573.732000] Using IPI Shortcut mode
[17179573.732000] ACPI wakeup devices:
[17179573.732000] PCI0 PCI1 USB0 USB1 USB2 USB3 SU20 MC97
[17179573.732000] ACPI: (supports S0 S1 S4 S5)
[17179573.732000] Freeing unused kernel memory: 288k freed
[17179573.804000] vga16fb: initializing
[17179573.804000] vga16fb: mapped to 0xc00a0000
[17179573.936000] Console: switching to colour frame buffer device 80x25
[17179573.936000] fb0: VGA16 VGA frame buffer device
[17179575.056000] Capability LSM initialized
[17179575.708000] SCSI subsystem initialized
[17179575.712000] ACPI: bus type scsi registered
[17179575.712000] libata version 1.20 loaded.
[17179575.716000] sata_via 0000:00:0f.0: version 1.1
[17179575.716000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[17179575.716000] sata_via 0000:00:0f.0: routed to hard irq line 0
[17179575.716000] ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xB000 irq 169
[17179575.716000] ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xB402 bmdma 0xB008 irq 169
[17179575.880000] ata1: dev 0 cfg 00:045a 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003 88:80ff 93:0000
[17179575.880000] ata1: dev 0 ATA-7, max UDMA7, 156368016 sectors: LBA48
[17179575.880000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0xdffe3b00
[17179575.888000] ata1: dev 0 configured for UDMA/133
[17179575.888000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0xdffe3b00
[17179575.896000] scsi0 : sata_via
[17179577.104000] scsi1 : sata_via
[17179577.104000] Vendor: ATA Model: SAMSUNG SP0812C Rev: SU10
[17179577.104000] Type: Direct-Access ANSI SCSI revision: 05
[17179577.112000] Driver 'sd' needs updating - please use bus_type methods
[17179577.116000] SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB)
[17179577.116000] SCSI device sda: drive cache: write back
[17179577.120000] SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB)
[17179577.120000] SCSI device sda: drive cache: write back
[17179577.120000] sda: sda1 sda2 sda3
[17179577.140000] sd 0:0:0:0: Attached scsi disk sda
[17179577.368000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179577.368000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[17179577.368000] PCI: VIA IRQ fixup for 0000:00:0f.1, from 14 to 9
[17179577.368000] VP_IDE: chipset revision 6
[17179577.368000] VP_IDE: not 100% native mode: will probe irqs later
[17179577.368000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179577.368000] ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio
[17179577.368000] ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:pio, hdd:DMA
[17179577.368000] Probing IDE interface ide0...
[17179577.784000] hda: Maxtor 6L080L0, ATA DISK drive
[17179578.456000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179578.480000] Probing IDE interface ide1...
[17179579.624000] hdd: PIONEER DVD-RW DVR-109, ATAPI CD/DVD-ROM drive
[17179579.680000] ide1 at 0x170-0x177,0x376 on irq 15
[17179579.688000] hda: max request size: 128KiB
[17179579.700000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179579.704000] hda: cache flushes supported
[17179579.704000] hda: hda1 hda2 < hda5 >
[17179579.728000] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
[17179579.728000] Uniform CD-ROM driver Revision: 3.20
[17179579.932000] usbcore: registered new driver usbfs
[17179579.932000] usbcore: registered new driver hub
[17179579.936000] USB Universal Host Controller Interface driver v2.3
[17179579.936000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[17179579.936000] PCI: VIA IRQ fixup for 0000:00:10.0, from 0 to 1
[17179579.936000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179579.936000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179579.936000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000a000
[17179579.936000] hub 1-0:1.0: USB hub found
[17179579.936000] hub 1-0:1.0: 2 ports detected
[17179580.040000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
[17179580.040000] PCI: VIA IRQ fixup for 0000:00:10.1, from 0 to 1
[17179580.040000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179580.040000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179580.040000] uhci_hcd 0000:00:10.1: irq 177, io base 0x00009800
[17179580.040000] hub 2-0:1.0: USB hub found
[17179580.040000] hub 2-0:1.0: 2 ports detected
[17179580.144000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
[17179580.144000] PCI: VIA IRQ fixup for 0000:00:10.2, from 0 to 1
[17179580.144000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179580.144000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179580.144000] uhci_hcd 0000:00:10.2: irq 177, io base 0x00009400
[17179580.144000] hub 3-0:1.0: USB hub found
[17179580.144000] hub 3-0:1.0: 2 ports detected
[17179580.248000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
[17179580.248000] PCI: VIA IRQ fixup for 0000:00:10.3, from 0 to 1
[17179580.248000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179580.248000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179580.248000] uhci_hcd 0000:00:10.3: irq 177, io base 0x00009000
[17179580.248000] hub 4-0:1.0: USB hub found
[17179580.248000] hub 4-0:1.0: 2 ports detected
[17179580.352000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
[17179580.352000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179580.356000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179580.356000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xe5000000
[17179580.356000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179580.356000] hub 5-0:1.0: USB hub found
[17179580.356000] hub 5-0:1.0: 8 ports detected
[17179580.524000] Attempting manual resume
[17179580.548000] kjournald starting. Commit interval 5 seconds
[17179580.548000] EXT3-fs: mounted filesystem with ordered data mode.
[17179588.324000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179591.004000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179591.024000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179591.048000] Linux agpgart interface v0.101 (c) Dave Jones
[17179591.052000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[17179591.064000] agpgart: AGP aperture is 128M @ 0xf0000000
[17179591.376000] PCI: Enabling device 0000:00:09.0 (0014 -> 0017)
[17179591.376000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179591.376000] skge 1.3 addr 0xe5800000 irq 185 chip Yukon rev 1
[17179591.376000] skge eth0: addr 00:0e:a6:2f:3a:2e
[17179591.724000] nvidia: module license 'NVIDIA' taints kernel.
[17179591.732000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179591.732000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006
[17179591.920000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201
[17179591.928000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179591.996000] input: GenPS/2 Genius <NULL> as /class/input/input1
[17179592.440000] codec_read: codec 0 is not valid [0xfe0000]
[17179592.448000] codec_read: codec 0 is not valid [0xfe0000]
[17179592.452000] codec_read: codec 0 is not valid [0xfe0000]
[17179592.460000] codec_read: codec 0 is not valid [0xfe0000]
[17179593.140000] input: PC Speaker as /class/input/input2
[17179593.240000] ts: Compaq touchscreen protocol output
[17179593.344000] parport: PnPBIOS parport detected.
[17179593.344000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179593.396000] parport0: Printer, Canon BJC-1000
[17179593.436000] Real Time Clock Driver v1.12
[17179594.224000] Floppy drive(s): fd0 is 1.44M
[17179594.236000] skge eth0: enabling interface
[17179594.684000] FDC 0 is a post-1991 82077
[17179595.284000] NET: Registered protocol family 17
[17179595.348000] lp0: using parport0 (interrupt-driven).
[17179595.432000] Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k
[17179595.572000] EXT3 FS on sda1, internal journal
[17179595.784000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179595.784000] md: bitmap version 4.39
[17179596.388000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179596.504000] skge eth0: Link is up at 10 Mbps, half duplex, flow control none
[17179597.112000] cdrom: open failed.
[17179597.636000] kjournald starting. Commit interval 5 seconds
[17179597.636000] EXT3 FS on sda3, internal journal
[17179597.636000] EXT3-fs: mounted filesystem with ordered data mode.
[17179598.936000] ACPI: Power Button (FF) [PWRF]
[17179598.936000] ACPI: Power Button (CM) [PWRB]
[17179599.104000] ibm_acpi: ec object not found
[17179599.148000] pcc_acpi: loading...
[17179603.928000] NVRM: not using NVAGP, an AGPGART backend is loaded!
[17179605.476000] ppdev: user-space parallel port driver
[17179605.820000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179605.820000] apm: overridden by ACPI.
[17179606.448000] NET: Registered protocol family 10
[17179606.448000] lo: Disabled Privacy Extensions
[17179606.448000] IPv6 over IPv4 tunneling driver
[17179609.908000] Bluetooth: Core ver 2.8
[17179609.908000] NET: Registered protocol family 31
[17179609.908000] Bluetooth: HCI device and connection manager initialized
[17179609.908000] Bluetooth: HCI socket layer initialized
[17179609.948000] Bluetooth: L2CAP ver 2.8
[17179609.948000] Bluetooth: L2CAP socket layer initialized
[17179609.952000] Bluetooth: RFCOMM socket layer initialized
[17179609.952000] Bluetooth: RFCOMM TTY layer initialized
[17179609.952000] Bluetooth: RFCOMM ver 1.7
[17179617.064000] eth0: no IPv6 routers present
[17181067.984000] atkbd.c: Unknown key pressed (translated set 2, code 0xbb on isa0060/serio0).
[17181067.984000] atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
[17181068.108000] atkbd.c: Unknown key released (translated set 2, code 0xbb on isa0060/serio0).
[17181068.108000] atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
[17181071.572000] atkbd.c: Unknown key pressed (translated set 2, code 0xbb on isa0060/serio0).
[17181071.572000] atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
[17181071.680000] atkbd.c: Unknown key released (translated set 2, code 0xbb on isa0060/serio0).
[17181071.680000] atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
[17191854.568000] cdrom: This disc doesn't have any tracks I recognize!
[17192252.996000] cdrom: This disc doesn't have any tracks I recognize!
[17235957.040000] Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
[17235957.700000] kjournald starting. Commit interval 5 seconds
[17235957.700000] EXT3 FS on hda1, internal journal
[17235957.700000] EXT3-fs: mounted filesystem with ordered data mode.
[17240019.784000] kjournald starting. Commit interval 5 seconds
[17240019.788000] EXT3 FS on hda1, internal journal
[17240019.788000] EXT3-fs: mounted filesystem with ordered data mode.
antonio@ubuntu:~$
VADO in risorse del pc e clicco sulla icona dell'hard disk
errore: il dispositivo /dev/hda1 non è rimovibile
errore: impossibile eseguire pmount
Se provo a cambiare i permessi mi dice che non è possibile
Allora provo con disks-admin da root e comunque non riesco ad abilitare la lettura output:
** (disks-admin:3976): WARNING **: mount: il mount point nessuno non esiste ??? javascript:void(0);
Come va impostato il mount point? Quale riga di comado? serve anche creare un'apposita directory!??
Ho cercato in rete, probabilmente male, e non ho trovato nessuna soluzione. Ho evitato di fare tentativi perché con il pc ci lavoro e voglio evitare problemi che poi non ho il tempo di risolvere, mio malgrado. javascript:void(0);
Ecco anche spiegato il perche' dei due sistemi uguali. Ma il problema permane considerato che non riesco a trasferire dati fra gli HD.
Grazie per l'aiuto.javascript:void(0);
--=YUZA=--
