Pagina 1 di 1

[Wireless] problema con key wifi usb

Inviato: sabato 19 giugno 2010, 19:31
da alexxx29
salve a tutti,sono entrato oggi per la prima volta nel mondo di linux e di ubuntu,purtroppo è tutto il pomeriggio ke mi sbatto per far funzionare il wifi.Ho letto 3000 post e provato tutte le varie soluzioni che ho trovato ma nn ho risolto nulla, praticamente ho installato i driver con ndiswrapper e fin qui è tutto ok,da terminale la penna è rilevata ma il problema è che il led rimane spento e i vari programmi tipo wicd,wifi radar ecc ecc non trovano l'hardware.ho dovuto smontare il router di fastweb e spostarlo per connettermi tramite cavo ma non posso tenerlo a lungo in quanto così starei senza telefono.Spero che qualche anima buona possa aiutarmi :)

Re: [Wireless] problema con key wifi usb

Inviato: sabato 19 giugno 2010, 20:41
da ju
Posta almeno il modello della chiavetta.

Re: [Wireless] problema con key wifi usb

Inviato: sabato 19 giugno 2010, 20:56
da alexxx29
ju ha scritto: Posta almeno il modello della chiavetta.
atlantis land A02-UP-54-W54

questa è la situazione:
alex@alex-desktop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04d9:1603 Holtek Semiconductor, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 2304:0225 Pinnacle Systems, Inc. [hex]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 010: ID 05ac:1292 Apple, Inc. iPhone 3G
Bus 001 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
alex@alex-desktop:~$

comando dsmeg:
[    0.369392] NetLabel:  domain hash size = 128
[    0.369393] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.369425] NetLabel:  unlabeled traffic allowed by default
[    0.373056] AppArmor: AppArmor Filesystem Enabled
[    0.373119] pnp: PnP ACPI init
[    0.373164] ACPI: bus type pnp registered
[    0.377240] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
[    0.377245] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
[    0.377248] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
[    0.377251] pnp 00:0b: mem resource (0x100000-0x5fffffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
[    0.377740] pnp: PnP ACPI: found 12 devices
[    0.377741] ACPI: ACPI bus type pnp unregistered
[    0.377764] system 00:06: ioport range 0x290-0x297 has been reserved
[    0.377771] system 00:07: ioport range 0x3e0-0x3e7 has been reserved
[    0.377774] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.377777] system 00:07: ioport range 0x800-0x87f has been reserved
[    0.377779] system 00:07: ioport range 0x400-0x41f has been reserved
[    0.377786] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.377791] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.377794] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.377799] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[    0.377804] system 00:0b: iomem range 0xfff80000-0xffffffff has been reserved
[    0.382595] Switching to clocksource acpi_pm
[    0.383167] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.383167] pci 0000:00:01.0:  IO window: disabled
[    0.383167] pci 0000:00:01.0:  MEM window: 0xfa000000-0xfbdfffff
[    0.383167] pci 0000:00:01.0:  PREFETCH window: 0xd0000000-0xdfffffff
[    0.383167] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04
[    0.383167] pci 0000:00:13.0:  IO window: disabled
[    0.383167] pci 0000:00:13.0:  MEM window: 0xfbe00000-0xfbefffff
[    0.383167] pci 0000:00:13.0:  PREFETCH window: disabled
[    0.383167] pci 0000:00:13.1: PCI bridge, secondary bus 0000:05
[    0.383167] pci 0000:00:13.1:  IO window: 0xe000-0xefff
[    0.383167] pci 0000:00:13.1:  MEM window: 0xfbf00000-0xfbffffff
[    0.383167] pci 0000:00:13.1:  PREFETCH window: disabled
[    0.383167] pci 0000:00:01.0: setting latency timer to 64
[    0.383167] pci 0000:00:13.0: setting latency timer to 64
[    0.383167] pci 0000:00:13.1: setting latency timer to 64
[    0.383167] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.383167] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.383167] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfbdfffff]
[    0.383167] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.383167] pci_bus 0000:04: resource 1 mem: [0xfbe00000-0xfbefffff]
[    0.383167] pci_bus 0000:05: resource 0 io:  [0xe000-0xefff]
[    0.383167] pci_bus 0000:05: resource 1 mem: [0xfbf00000-0xfbffffff]
[    0.383167] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    0.383167] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.383167] NET: Registered protocol family 2
[    0.383167] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.383167] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.394005] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.396843] TCP: Hash tables configured (established 262144 bind 65536)
[    0.396854] TCP reno registered
[    0.397221] NET: Registered protocol family 1
[    0.397277] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.397328] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.397472] pci 0000:01:00.0: Boot video device
[    0.397897] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[    0.408548] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[    0.408955] Scanning for low memory corruption every 60 seconds
[    0.409152] audit: initializing netlink socket (disabled)
[    0.409175] type=2000 audit(1276972760.400:1): initialized
[    0.417790] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.419331] VFS: Disk quotas dquot_6.5.2
[    0.419402] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.420367] fuse init (API version 7.13)
[    0.420479] msgmni has been set to 2485
[    0.421018] alg: No test for stdrng (krng)
[    0.421129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.421138] io scheduler noop registered
[    0.421140] io scheduler anticipatory registered
[    0.421142] io scheduler deadline registered
[    0.421192] io scheduler cfq registered (default)
[    0.421532] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.421559] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.421784] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.421817] ACPI: Sleep Button [SLPB]
[    0.421894] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.421899] ACPI: Power Button [PWRB]
[    0.421959] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.421961] ACPI: Power Button [PWRF]
[    0.422831] processor LNXCPU:00: registered as cooling_device0
[    0.423136] processor LNXCPU:01: registered as cooling_device1
[    0.428931] Linux agpgart interface v0.103
[    0.428995] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.430666] brd: module loaded
[    0.431257] loop: module loaded
[    0.431449] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.432174]  alloc irq_desc for 21 on node 0
[    0.432177]  alloc kstat_irqs on node 0
[    0.432194] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.432335] pata_acpi 0000:00:0f.0: PCI INT B disabled
[    0.432970] Fixed MDIO Bus: probed
[    0.433024] PPP generic driver version 2.4.2
[    0.433121] tun: Universal TUN/TAP device driver, 1.6
[    0.433123] tun: (C) 1999-2004 Max Krasnyansky
[    0.433232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.433325]  alloc irq_desc for 22 on node 0
[    0.433327]  alloc kstat_irqs on node 0
[    0.433337] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.433413] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    0.433470] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    0.433540] ehci_hcd 0000:00:10.4: debug port 1
[    0.433574] ehci_hcd 0000:00:10.4: irq 22, io mem 0xf9fff800
[    0.450024] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.450178] usb usb1: configuration #1 chosen from 1 choice
[    0.450225] hub 1-0:1.0: USB hub found
[    0.450241] hub 1-0:1.0: 8 ports detected
[    0.450329] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.450346] uhci_hcd: USB Universal Host Controller Interface driver
[    0.450541]  alloc irq_desc for 20 on node 0
[    0.450543]  alloc kstat_irqs on node 0
[    0.450551] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.450561] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.450608] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.450644] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c000
[    0.450774] usb usb2: configuration #1 chosen from 1 choice
[    0.450803] hub 2-0:1.0: USB hub found
[    0.450819] hub 2-0:1.0: 2 ports detected
[    0.450944] uhci_hcd 0000:00:10.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.450950] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.450989] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.451014] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b800
[    0.451150] usb usb3: configuration #1 chosen from 1 choice
[    0.451179] hub 3-0:1.0: USB hub found
[    0.451193] hub 3-0:1.0: 2 ports detected
[    0.451286] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.451293] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.451359] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.451393] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b400
[    0.451575] usb usb4: configuration #1 chosen from 1 choice
[    0.451602] hub 4-0:1.0: USB hub found
[    0.451613] hub 4-0:1.0: 2 ports detected
[    0.451707]  alloc irq_desc for 23 on node 0
[    0.451709]  alloc kstat_irqs on node 0
[    0.451714] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.451721] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.451756] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.451793] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000b000
[    0.451986] usb usb5: configuration #1 chosen from 1 choice
[    0.452011] hub 5-0:1.0: USB hub found
[    0.452024] hub 5-0:1.0: 2 ports detected
[    0.452189] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[    0.452191] PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.452690] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.452705] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.452831] mice: PS/2 mouse device common for all mice
[    0.453003] rtc_cmos 00:02: RTC can wake from S4
[    0.453138] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.453179] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.453420] device-mapper: uevent: version 1.0.3
[    0.453674] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.453813] device-mapper: multipath: version 1.1.0 loaded
[    0.453819] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.454134] cpuidle: using governor ladder
[    0.454175] cpuidle: using governor menu
[    0.454658] TCP cubic registered
[    0.454798] NET: Registered protocol family 10
[    0.455471] lo: Disabled Privacy Extensions
[    0.455783] NET: Registered protocol family 17
[    0.455895] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[    0.455929] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[    0.455930] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[    0.456092] PM: Resume from disk failed.
[    0.456148] registered taskstats version 1
[    0.456742]  Magic number: 14:469:696
[    0.456870] pci 0000:00:00.1: hash matches
[    0.457001] rtc_cmos 00:02: setting system clock to 2010-06-19 18:39:21 UTC (1276972761)
[    0.457005] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.457007] EDD information not available.
[    0.526752] Freeing initrd memory: 8133k freed
[    0.542925] Freeing unused kernel memory: 876k freed
[    0.544144] Write protecting the kernel read-only data: 7680k
[    0.577223] udev: starting version 151
[    0.745791] Floppy drive(s): fd0 is 1.44M
[    0.767214] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    0.784446] ahci 0000:00:0f.0: version 3.0
[    0.784478] ahci 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.784566] ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ
[    0.784568] ahci 0000:00:0f.0: controller can't do PMP, turning off CAP_PMP
[    0.784708] ahci 0000:00:0f.0: PCI: Disallowing DAC for device
[    0.784741] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    0.784745] ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part
[    0.792886] FDC 0 is a post-1991 82077
[    0.834565] scsi0 : ahci
[    0.850219] scsi1 : ahci
[    0.850485] scsi2 : ahci
[    0.850604] scsi3 : ahci
[    0.851365] ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 21
[    0.851371] ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 21
[    0.851375] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 21
[    0.851380] ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80 irq 21
[    0.852725] pata_via 0000:00:0f.1: version 0.3.4
[    0.853011] scsi4 : pata_via
[    0.853204] scsi5 : pata_via
[    0.855291] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    0.855294] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    0.855482]  alloc irq_desc for 18 on node 0
[    0.855485]  alloc kstat_irqs on node 0
[    0.855494] ohci1394 0000:05:09.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    0.855722] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.856458] eth0: VIA Rhine II at 0xf9fff400, 00:18:f3:02:e7:e4, IRQ 23.
[    0.857137] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[    0.910076] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[fbfff800-fbffffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    0.950021] usb 1-5: new high speed USB device using ehci_hcd and address 4
[    1.051958] ata5.00: ATA-7: Maxtor 6L300R0, BAJ41G20, max UDMA/133
[    1.051960] ata5.00: 586114704 sectors, multi 16: LBA48
[    1.052276] ata5.01: ATA-6: Maxtor 4D040H2, DAH017K0, max UDMA/100
[    1.052278] ata5.01: 80043264 sectors, multi 16: LBA
[    1.091813] ata5.00: configured for UDMA/133
[    1.100484] usb 1-5: configuration #1 chosen from 1 choice
[    1.130574] ata5.01: configured for UDMA/100
[    1.200028] ata1: SATA link down (SStatus 0 SControl 300)
[    1.200050] ata4: SATA link down (SStatus 0 SControl 300)
[    1.200067] ata2: SATA link down (SStatus 0 SControl 300)
[    1.220113] usb 1-6: new high speed USB device using ehci_hcd and address 5
[    1.373928] usb 1-6: configuration #1 chosen from 1 choice
[    1.383814] Initializing USB Mass Storage driver...
[    1.384135] scsi6 : SCSI emulation for USB Mass Storage devices
[    1.384280] usbcore: registered new interface driver usb-storage
[    1.384283] USB Mass Storage support registered.
[    1.384292] usb-storage: device found at 5
[    1.384293] usb-storage: waiting for device to settle before scanning
[    1.650019] usb 2-1: new full speed USB device using uhci_hcd and address 2
[    1.780020] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.781157] ata3.00: ATAPI: PIONEER DVD-RW  DVR-212, 1.24, max UDMA/66
[    1.782623] ata3.00: configured for UDMA/66
[    1.805677] scsi 2:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-212  1.24 PQ: 0 ANSI: 5
[    1.823910] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.823914] Uniform CD-ROM driver Revision: 3.20
[    1.824099] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.824200] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    1.824535] scsi 4:0:0:0: Direct-Access    ATA      Maxtor 6L300R0  BAJ4 PQ: 0 ANSI: 5
[    1.824815] sd 4:0:0:0: [sda] 586114704 512-byte logical blocks: (300 GB/279 GiB)
[    1.824846] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.824870] sd 4:0:0:0: [sda] Write Protect is off
[    1.824873] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.824898] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.824991] scsi 4:0:1:0: Direct-Access    ATA      Maxtor 4D040H2  DAH0 PQ: 0 ANSI: 5
[    1.825126] sd 4:0:1:0: Attached scsi generic sg2 type 0
[    1.825400] sd 4:0:1:0: [sdb] 80043264 512-byte logical blocks: (40.9 GB/38.1 GiB)
[    1.825439]  sda:
[    1.825492] sd 4:0:1:0: [sdb] Write Protect is off
[    1.825495] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.844921]  sda1 sda2
[    1.844940] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.845192]  sdb:
[    1.848839] usb 2-1: configuration #1 chosen from 1 choice
[    1.875746]  sdb1 sdb2
[    1.910510] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.911114] sd 4:0:1:0: [sdb] Attached SCSI disk
[    2.140025] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    2.240232] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c0141018aeb]
[    2.415298] usb 3-2: configuration #1 chosen from 1 choice
[    2.436879] usbcore: registered new interface driver hiddev
[    2.480608] input:  USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input4
[    2.480825] generic-usb 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:10.1-2/input0
[    2.573283] input:  USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input5
[    2.573580] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:10.1-2/input1
[    2.573659] usbcore: registered new interface driver usbhid
[    2.573666] usbhid: v2.6:USB HID core driver
[    2.815865] EXT4-fs (sdb2): mounted filesystem with ordered data mode
[    6.382733] usb-storage: device scan complete
[    6.383334] scsi 6:0:0:0: Direct-Access              USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
[    6.383956] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    6.384552] sd 6:0:0:0: [sdc] 4028416 512-byte logical blocks: (2.06 GB/1.92 GiB)
[    6.385037] sd 6:0:0:0: [sdc] Write Protect is off
[    6.385040] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[    6.385043] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    6.387158] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    6.387163]  sdc: sdc1
[    6.389782] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    6.389785] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[  16.687493] udev: starting version 151
[  16.722081] Adding 1185784k swap on /dev/sdb7.  Priority:-1 extents:1 across:1185784k
[  16.892758] lp: driver loaded but no devices found
[  16.896263] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  16.929726] EDAC MC: Ver: 2.1.0 Apr 16 2010
[  16.974591] EDAC amd64_edac:  Ver: 3.2.0 Apr 16 2010
[  16.976689] lirc_dev: IR Remote Control driver registered, major 61
[  16.978965] lirc_mceusb: Windows Media Center Edition USB IR Transceiver driver for LIRC 1.90
[  16.978972] lirc_mceusb: Daniel Melander , Martin Blatter , Dan Conti
[  17.026330] Disabling lock debugging due to kernel taint
[  17.040585] EDAC amd64: ECC is enabled by BIOS.
[  17.040806] EDAC MC: Rev E or earlier detected
[  17.040939] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[  17.040969] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[  17.092866] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[  17.163702] vga16fb: initializing
[  17.163717] vga16fb: mapped to 0xffff8800000a0000
[  17.163884] fb0: VGA16 VGA frame buffer device
[  17.172137] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[  17.245216] type=1505 audit(1276965578.283:2):  operation="profile_load" pid=599 name="/sbin/dhclient3"
[  17.245515] type=1505 audit(1276965578.283:3):  operation="profile_load" pid=599 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[  17.245687] type=1505 audit(1276965578.283:4):  operation="profile_load" pid=599 name="/usr/lib/connman/scripts/dhclient-script"
[  17.256793] lirc_dev: lirc_register_driver: sample_rate: 0
[  17.261778] lirc_mceusb[2]: Pinnacle Systems PCTV Remote USB on usb2:2
[  17.262747] lirc_mceusb[2]: usb reset config ret 0
[  17.262916] usbcore: registered new interface driver lirc_mceusb
[  17.546148] gameport: EMU10K1 is pci0000:05:09.1/gameport0, io 0xe400, speed 1152kHz
[  17.696120]  alloc irq_desc for 17 on node 0
[  17.696127]  alloc kstat_irqs on node 0
[  17.696146] HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[  17.696272] HDA Intel 0000:04:01.0: setting latency timer to 64
[  17.701629] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[  17.763236] Console: switching to colour frame buffer device 80x30
[  17.770832] EMU10K1_Audigy 0000:05:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[  17.773736] Installing spdif_bug patch: SB Audigy 2 ZS [SB0360]
[  18.133143] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/input/input7
[  18.340124] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[  18.374704] type=1505 audit(1276965579.413:5):  operation="profile_load" pid=938 name="/usr/share/gdm/guest-session/Xsession"
[  18.377345] type=1505 audit(1276965579.413:6):  operation="profile_replace" pid=939 name="/sbin/dhclient3"
[  18.377631] type=1505 audit(1276965579.413:7):  operation="profile_replace" pid=939 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[  18.377807] type=1505 audit(1276965579.413:8):  operation="profile_replace" pid=939 name="/usr/lib/connman/scripts/dhclient-script"
[  18.384987] type=1505 audit(1276965579.423:9):  operation="profile_load" pid=940 name="/usr/bin/evince"
[  18.389162] type=1505 audit(1276965579.423:10):  operation="profile_load" pid=940 name="/usr/bin/evince-previewer"
[  18.391808] type=1505 audit(1276965579.433:11):  operation="profile_load" pid=940 name="/usr/bin/evince-thumbnailer"
[  18.693827] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  18.985275] ndiswrapper (check_nt_hdr:150): kernel is 64-bit, but Windows driver is not 64-bit;bad magic: 010B
[  18.985284] ndiswrapper (load_sys_files:206): couldn't prepare driver 'sis163u'
[  18.986043] ndiswrapper (load_wrap_driver:108): couldn't load driver sis163u; check system log for messages from 'loadndisdriver'
[  18.986143] usbcore: registered new interface driver ndiswrapper
[  19.261816] ppdev: user-space parallel port driver
[  19.702830] [drm] Initialized drm 1.1.0 20060810
[  19.707079]  alloc irq_desc for 16 on node 0
[  19.707089]  alloc kstat_irqs on node 0
[  19.707105] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  19.709547] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[  19.713708] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[  19.713765] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[  19.713864] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[  26.093348] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[  28.840016] eth0: no IPv6 routers present
[  52.209021] end_request: I/O error, dev fd0, sector 0
[  64.298348] end_request: I/O error, dev fd0, sector 0
[ 1605.138785] usb 1-5: USB disconnect, address 4
[ 2386.250054] usb 1-5: new high speed USB device using ehci_hcd and address 6
[ 2386.400707] usb 1-5: configuration #1 chosen from 1 choice
[ 2386.530055] usb 1-5: reset high speed USB device using ehci_hcd and address 6
[ 2386.685212] ndiswrapper (check_nt_hdr:150): kernel is 64-bit, but Windows driver is not 64-bit;bad magic: 010B
[ 2386.685224] ndiswrapper (load_sys_files:206): couldn't prepare driver 'sis163u'
[ 2386.686317] ndiswrapper (load_wrap_driver:108): couldn't load driver sis163u; check system log for messages from 'loadndisdriver'
[ 2400.882806] usb 1-6: USB disconnect, address 5
[ 2449.790064] usb 1-6: new high speed USB device using ehci_hcd and address 7
[ 2449.944205] usb 1-6: configuration #1 chosen from 1 choice
[ 2449.944905] scsi7 : SCSI emulation for USB Mass Storage devices
[ 2449.945212] usb-storage: device found at 7
[ 2449.945214] usb-storage: waiting for device to settle before scanning
[ 2454.942900] usb-storage: device scan complete
[ 2454.943603] scsi 7:0:0:0: Direct-Access              USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
[ 2454.944851] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 2456.310092] sd 7:0:0:0: [sdc] 4028416 512-byte logical blocks: (2.06 GB/1.92 GiB)
[ 2456.310562] sd 7:0:0:0: [sdc] Write Protect is off
[ 2456.310565] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 2456.310568] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 2456.315192] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 2456.315204]  sdc: sdc1
[ 2456.319692] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 2456.319708] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 2531.150299] usbcore: deregistering interface driver ndiswrapper
[ 2531.150699] ndiswrapper (ntoskernel_exit:2677): object ffff880041110630(2) was not freed, freeing it now
[ 2531.150702] ndiswrapper (ntoskernel_exit:2677): object ffff880030283430(2) was not freed, freeing it now
[ 2531.181340] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 2531.360060] usb 1-5: reset high speed USB device using ehci_hcd and address 6
[ 2531.515613] ndiswrapper (check_nt_hdr:150): kernel is 64-bit, but Windows driver is not 64-bit;bad magic: 010B
[ 2531.515628] ndiswrapper (load_sys_files:206): couldn't prepare driver 'sis163u'
[ 2531.516737] ndiswrapper (load_wrap_driver:108): couldn't load driver sis163u; check system log for messages from 'loadndisdriver'
[ 2531.516855] usbcore: registered new interface driver ndiswrapper
[ 4152.333157] usb 1-6: USB disconnect, address 7
[ 4152.427865] FAT: Directory bread(block 7888) failed
[ 4152.427894] FAT: Directory bread(block 7889) failed
[ 4152.427902] FAT: Directory bread(block 7890) failed
[ 4152.427910] FAT: Directory bread(block 7891) failed
[ 4152.427917] FAT: Directory bread(block 7892) failed
[ 4152.427924] FAT: Directory bread(block 7893) failed
[ 4152.427932] FAT: Directory bread(block 7894) failed
[ 4152.427940] FAT: Directory bread(block 7895) failed
[ 4152.732633] usb 1-6: new high speed USB device using ehci_hcd and address 8
[ 4152.892882] usb 1-6: configuration #1 chosen from 1 choice
[ 4152.926067] scsi8 : SCSI emulation for USB Mass Storage devices
[ 4152.932437] usb-storage: device found at 8
[ 4152.932445] usb-storage: waiting for device to settle before scanning
[ 4157.940270] usb-storage: device scan complete
[ 4157.941366] scsi 8:0:0:0: Direct-Access              USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
[ 4157.942506] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 4157.963249] sd 8:0:0:0: [sdc] 4028416 512-byte logical blocks: (2.06 GB/1.92 GiB)
[ 4157.963725] sd 8:0:0:0: [sdc] Write Protect is off
[ 4157.963729] sd 8:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 4157.963733] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 4157.968597] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 4157.968610]  sdc: sdc1
[ 4157.977233] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 4157.977250] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 5450.231088] usb 1-6: USB disconnect, address 8
[ 5450.299850] FAT: Directory bread(block 7888) failed
[ 5450.299865] FAT: Directory bread(block 7889) failed
[ 5450.299872] FAT: Directory bread(block 7890) failed
[ 5450.299879] FAT: Directory bread(block 7891) failed
[ 5450.299886] FAT: Directory bread(block 7892) failed
[ 5450.299892] FAT: Directory bread(block 7893) failed
[ 5450.299898] FAT: Directory bread(block 7894) failed
[ 5450.299905] FAT: Directory bread(block 7895) failed
[ 5455.690054] usb 1-6: new high speed USB device using ehci_hcd and address 9
[ 5455.846297] usb 1-6: configuration #1 chosen from 4 choices
[ 5537.074834] usb 1-6: USB disconnect, address 9
[ 5538.990041] usb 1-6: new high speed USB device using ehci_hcd and address 10
[ 5539.146416] usb 1-6: configuration #1 chosen from 4 choices
[ 5903.260586] __ratelimit: 9 callbacks suppressed
[ 5903.260599] mission-control[10278]: segfault at 0 ip 0000000000431ee6 sp 00007fffc1859fe0 error 4 in mission-control-5[400000+4d000]
[ 6061.140449] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 6061.145644] SGI XFS Quota Management subsystem
[ 6061.255608] JFS: nTxBlock = 8192, nTxLock = 65536
[ 6061.344902] NTFS driver 2.1.29 [Flags: R/O MODULE].
[ 6061.447608] QNX4 filesystem 0.2.3 registered.
[ 6061.657861] Btrfs loaded
[ 6064.844996] EXT3-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
[ 6064.851690] kjournald starting.  Commit interval 5 seconds
[ 6064.851800] EXT3-fs: mounted filesystem with ordered data mode.
[ 6161.338637] EXT3-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
[ 6161.347162] kjournald starting.  Commit interval 5 seconds
[ 6161.347195] EXT3-fs: mounted filesystem with ordered data mode.
[ 7073.672898] usbcore: deregistering interface driver ndiswrapper
[ 7073.673359] ndiswrapper (ntoskernel_exit:2677): object ffff880030282230(2) was not freed, freeing it now
[ 7073.765075] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 7073.864457] usbcore: registered new interface driver ndiswrapper
[ 7854.825293] mission-control[13346] general protection ip:7f18ef727398 sp:7fffa3744cc8 error:0 in libc-2.11.1.so[7f18ef6a5000+178000]
alex@alex-desktop:~$


se ti serve altro chiedi pure grazie ;D

Re: [Wireless] problema con key wifi usb

Inviato: domenica 20 giugno 2010, 10:51
da ju
http://www.atlantisland.it/ita/download ... gia=DRIVER

sul link sopra ci sono dei driver, controlla se sono per la tua, ma hai provato a connetterti prima usare il wrapper?

Re: [Wireless] problema con key wifi usb

Inviato: domenica 20 giugno 2010, 13:29
da alexxx29
ju ha scritto: http://www.atlantisland.it/ita/download ... gia=DRIVER

sul link sopra ci sono dei driver, controlla se sono per la tua, ma hai provato a connetterti prima usare il wrapper?
ciao,riesco a connettermi soltanto tramite cavo.ho scaricato dal sito della atlantis tutte le versioni disponibili del driver (disponibile solo per windows) e installato tramite wrapper con interfaccia grafica,che mi avvisa che l'hardware e rilevato e il driver e corretto,la chiave wifi risulta essere disponibile nelle risorse,ma poi quando provo a cercare una rete wifi sembrerebbe che l'hardware non sia disponibile,proprio come se fosse scollegato.ho provato con varie applicazioni e il risultato è sempre lo stesso.Inoltre sulla chiavetta non lampeggia il led