ciao a tutti ho provato a seguire questa guida per utilizzare la soprascritta pennetta :
http://www.ieie.it/2009/12/15/compilare ... su-ubuntu/
non ho errori ma kaffeine non mi vede il dispositivo:
lsusb:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 0ccd:0097 TerraTec Electronic GmbH
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 062a:0107 Creative Labs
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:2911 Hewlett-Packard PSC 2200
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsmod
Module Size Used by
nls_iso8859_1 3740 0
nls_cp437 5372 0
vfat 10716 0
fat 51452 1 vfat
binfmt_misc 8356 1
nfs 271880 1
lockd 67724 1 nfs
nfs_acl 2844 1 nfs
auth_rpcgss 36672 1 nfs
sunrpc 191776 13 nfs,lockd,nfs_acl,auth_rpcgss
arc4 1660 2
ecb 2524 2
snd_hda_codec_realtek 203328 1
rtl8180 28764 0
mac80211 181140 1 rtl8180
eeprom_93cx6 1916 1 rtl8180
snd_hda_intel 27016 3
snd_hda_codec 75708 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7200 1 snd_hda_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75296 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
ppdev 6688 0
usblp 12636 0
snd_seq_dummy 2656 0
psmouse 57332 0
snd_seq_oss 28576 0
serio_raw 5280 0
joydev 10240 0
snd_seq_midi 6464 0
snd_rawmidi 22176 1 snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 7 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 22276 2 snd_pcm,snd_seq
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 59204 19 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7264 1 snd
snd_page_alloc 9156 2 snd_hda_intel,snd_pcm
cfg80211 93052 2 rtl8180,mac80211
i2c_viapro 7344 0
iptable_filter 3100 0
ip_tables 11692 1 iptable_filter
x_tables 16544 1 ip_tables
nvidia 9586440 36
k8temp 4188 0
agpgart 34988 1 nvidia
parport_pc 31940 1
asus_atk0110 8252 0
shpchp 32272 0
lp 8964 0
parport 35340 3 ppdev,parport_pc,lp
usb_storage 52768 0
usbhid 38208 0
floppy 54916 0
sata_via 9120 3
atl1 32228 0
mii 5212 1 atl1
Avete qualche dritta
Saluti
[Risolto] terratec cinergy T stick RC dvb-t
[Risolto] terratec cinergy T stick RC dvb-t
Ultima modifica di luca72 il lunedì 21 giugno 2010, 18:06, modificato 1 volta in totale.
Re: terratec cinergy T stick RC dvb-t
ho notato che per quel tipo di penna serve uun altro modulo già presente nel kernel lo ho caricato e ottengo questo :
[ 6199.192014] usb 1-5: new high speed USB device using ehci_hcd and address 6
[ 6199.328979] usb 1-5: configuration #1 chosen from 1 choice
[ 6199.334865] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:10.4/usb1/1-5/1-5:1.1/input/input9
[ 6199.334957] generic-usb 0003:0CCD:0097.0004: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:10.4-5/input1
[ 7408.492299] usb 1-5: USB disconnect, address 6
[ 7583.928580] usbcore: registered new interface driver dvb_usb_af9015
[ 7603.721018] usb 1-6: new high speed USB device using ehci_hcd and address 7
[ 7603.866022] usb 1-6: configuration #1 chosen from 1 choice
[ 7603.882022] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:10.4/usb1/1-6/1-6:1.1/input/input10
[ 7603.882109] generic-usb 0003:0CCD:0097.0005: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:10.4-6/input1
[ 7620.175435] usb 1-6: USB disconnect, address 7
[ 7629.845023] usb 1-6: new high speed USB device using ehci_hcd and address 8
[ 7629.986065] usb 1-6: configuration #1 chosen from 1 choice
[ 7629.995005] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:10.4/usb1/1-6/1-6:1.1/input/input11
[ 7629.995093] generic-usb 0003:0CCD:0097.0006: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:10.4-6/input
ma caffeine continua a non vedermela
[ 6199.192014] usb 1-5: new high speed USB device using ehci_hcd and address 6
[ 6199.328979] usb 1-5: configuration #1 chosen from 1 choice
[ 6199.334865] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:10.4/usb1/1-5/1-5:1.1/input/input9
[ 6199.334957] generic-usb 0003:0CCD:0097.0004: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:10.4-5/input1
[ 7408.492299] usb 1-5: USB disconnect, address 6
[ 7583.928580] usbcore: registered new interface driver dvb_usb_af9015
[ 7603.721018] usb 1-6: new high speed USB device using ehci_hcd and address 7
[ 7603.866022] usb 1-6: configuration #1 chosen from 1 choice
[ 7603.882022] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:10.4/usb1/1-6/1-6:1.1/input/input10
[ 7603.882109] generic-usb 0003:0CCD:0097.0005: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:10.4-6/input1
[ 7620.175435] usb 1-6: USB disconnect, address 7
[ 7629.845023] usb 1-6: new high speed USB device using ehci_hcd and address 8
[ 7629.986065] usb 1-6: configuration #1 chosen from 1 choice
[ 7629.995005] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:10.4/usb1/1-6/1-6:1.1/input/input11
[ 7629.995093] generic-usb 0003:0CCD:0097.0006: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:10.4-6/input
ma caffeine continua a non vedermela
[Risolto] Re: terratec cinergy T stick RC dvb-t
Ho risolto con questo:
sudo apt-get install mercurial linux-headers-$(uname -r) build-essential
hg clone -r 18b40811c3fd http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
mkdir cinergy
cd cinergy
wget http://media.ubuntuusers.de/forum/attac ... ick_rc.tgz
tar xfvz cinergy_t_stick_rc.tgz
cp -r ./dvb-usb/* ~/v4l-dvb/linux/drivers/media/dvb/dvb-usb&&cp -r ./frontends/* ~/v4l-dvb/linux/drivers/media/dvb/frontends&&cp -r ./tuners/* ~/v4l-dvb/linux/drivers/media/common/tuners
cd ..
wget http://www.otit.fi/~crope/v4l-dvb/af901 ... -af9015.fw
sudo cp dvb-usb-af9015.fw /lib/firmware/
Note: If the compiling process stops with an error about M920X module and firedtv then do this first.
sed -i 's/CONFIG_DVB_FIREDTV=m/CONFIG_DVB_FIREDTV=n/' ./v4l/.config&&sed -i 's/CONFIG_DVB_USB_M920X=m/CONFIG_DVB_USB_M920X=n/' ./v4l/.config
Note: if you use a Dualcore CPU then do "make -j2" if you use a quadcore CPU "make -j4", single or unsure is "make"
make
sudo make install
sudo reboot
Note: to check if the module is loaded.
dmesg | grep -i dvb
Ciao
sudo apt-get install mercurial linux-headers-$(uname -r) build-essential
hg clone -r 18b40811c3fd http://linuxtv.org/hg/v4l-dvb
cd v4l-dvb
mkdir cinergy
cd cinergy
wget http://media.ubuntuusers.de/forum/attac ... ick_rc.tgz
tar xfvz cinergy_t_stick_rc.tgz
cp -r ./dvb-usb/* ~/v4l-dvb/linux/drivers/media/dvb/dvb-usb&&cp -r ./frontends/* ~/v4l-dvb/linux/drivers/media/dvb/frontends&&cp -r ./tuners/* ~/v4l-dvb/linux/drivers/media/common/tuners
cd ..
wget http://www.otit.fi/~crope/v4l-dvb/af901 ... -af9015.fw
sudo cp dvb-usb-af9015.fw /lib/firmware/
Note: If the compiling process stops with an error about M920X module and firedtv then do this first.
sed -i 's/CONFIG_DVB_FIREDTV=m/CONFIG_DVB_FIREDTV=n/' ./v4l/.config&&sed -i 's/CONFIG_DVB_USB_M920X=m/CONFIG_DVB_USB_M920X=n/' ./v4l/.config
Note: if you use a Dualcore CPU then do "make -j2" if you use a quadcore CPU "make -j4", single or unsure is "make"
make
sudo make install
sudo reboot
Note: to check if the module is loaded.
dmesg | grep -i dvb
Ciao
Re: [Risolto] terratec cinergy T stick RC dvb-t
ho applicato alla lettera la tua procedura, a me kaffeine ancora non riconosce il dispositivo. Con il comando dmesg | grep -i dvb ho il seguente output:
[ 11.063556] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4:1.1/input/input5
[ 11.063643] generic-usb 0003:0CCD:0097.0002: input,hidraw1: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1d.7-1.4/input1
[ 11.080813] DVB: registering new adapter (FlexCop Digital TV device)
[ 11.318235] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[ 11.318238] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[ 11.318303] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 545.736823] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4:1.1/input/input8
[ 545.736914] generic-usb 0003:0CCD:0097.0003: input,hidraw1: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1d.7-1.4/input1
rhino@rhino-desktop:~$ dmesg | grep -i dvb
[ 11.063556] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4:1.1/input/input5
[ 11.063643] generic-usb 0003:0CCD:0097.0002: input,hidraw1: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1d.7-1.4/input1
[ 11.080813] DVB: registering new adapter (FlexCop Digital TV device)
[ 11.318235] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[ 11.318238] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[ 11.318303] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 545.736823] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4:1.1/input/input8
[ 545.736914] generic-usb 0003:0CCD:0097.0003: input,hidraw1: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1d.7-1.4/input1
[ 11.063556] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4:1.1/input/input5
[ 11.063643] generic-usb 0003:0CCD:0097.0002: input,hidraw1: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1d.7-1.4/input1
[ 11.080813] DVB: registering new adapter (FlexCop Digital TV device)
[ 11.318235] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[ 11.318238] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[ 11.318303] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 545.736823] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4:1.1/input/input8
[ 545.736914] generic-usb 0003:0CCD:0097.0003: input,hidraw1: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1d.7-1.4/input1
rhino@rhino-desktop:~$ dmesg | grep -i dvb
[ 11.063556] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4:1.1/input/input5
[ 11.063643] generic-usb 0003:0CCD:0097.0002: input,hidraw1: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1d.7-1.4/input1
[ 11.080813] DVB: registering new adapter (FlexCop Digital TV device)
[ 11.318235] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[ 11.318238] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[ 11.318303] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 545.736823] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4:1.1/input/input8
[ 545.736914] generic-usb 0003:0CCD:0097.0003: input,hidraw1: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1d.7-1.4/input1
Re: [Risolto] terratec cinergy T stick RC dvb-t
non mi ero accorto dell'errore sul modulo M920X, ho rifatto tutta la procedura ed adesso funziona. Grazie mille!
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 4 ospiti