Alka-Seltzer PLUS ha scritto: Allora ... accedi ad una recovery mode e poi scegli dal successivo menù "drop to shell prompt"
Una volta che sei nell' interfaccia di testo dai nell' ordine (rispettando maiuscole, minuscole e spazi ):
Se dopo aver dato questo primo comando il terminale ti dà errore di file inesistente prosegui serenamente coi successivi:Codice: Seleziona tutto
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.bak
Codice: Seleziona tutto
sudo X -configureCodice: Seleziona tutto
sudo cp xorg.conf.new /etc/X11/xorg.confbisogna andare a scoprire a cosa si riferisce quell' errore ...Codice: Seleziona tutto
sudo reboot
[Risolto] Compaq 615: Ubuntu non parte dopo il grub!!!!
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
Nel caso di schermata nera, ( dejavù ), riconfigura la grafica come è stato fatto prima:
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
senti alla fine i driver che ho disinstallato perchè la procedura non andava bene, sono quelli corretti per la mia scheda? perchè sinceramente non so cosa scegliere 
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
Non lo so, quelli giusti li trovi andando qui:
http://support.amd.com/us/gpudownload/Pages/index.aspx
scegliendo:

http://support.amd.com/us/gpudownload/Pages/index.aspx
scegliendo:
Comunque, andando in "sistema->amministrazione->driver hardware" te li installerebbe ubuntu in automaticoStep 1: Select the type of system that you have: notebook graphics
Step 2: Select the product family your product belongs to: mobility radeon series
Step 3: Select your product: mobility radeon 3xxx series
Step 4: Select the supported operating system that you have: qui dipende da che versione di ubuntu hai; scegli x86 per ubuntu a 32bit, x86_64 altrimenti
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
sto installando i driver da "driver hardware" ....cmq sudo cp xorg.conf.new /etc/X11/xorg.conf questo comado è sbagliato!!
dice cp: impossibile fare stat di 'xorg.conf.new': Nessun file o directory
dice cp: impossibile fare stat di 'xorg.conf.new': Nessun file o directory
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
Hai avuto errori anche prima di quel comando ?
perchè non puoi dare
mentre c' è gnome aperto e l' errore deriva dal fatto che il file che stai cercando di copiare non è stato creato.
perchè non puoi dare
Codice: Seleziona tutto
sudo X -configurementre c' è gnome aperto e l' errore deriva dal fatto che il file che stai cercando di copiare non è stato creato.
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
Dopo il primo comando cioè sudo cp /etc/X11/xorg.conf /etc/X11/xorg.bak non fa nulla
Dopo il secondo comando cioè sudo X -configure
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again
Please consult the The X.Org Foundation support at http://wiki.x.org for help
ddxSigGiveUp: Closing log
Dopo il terzo comando cioè sudo cp xorg.conf.new /etc/X11/xorg.conf
dice cp: impossibile fare stat di 'xorg.conf.new': Nessun file o directory
ora sembra che riavviando Ubuntu parta sempre, però Errore controller pci all'avvio c'è sempre
Dopo il secondo comando cioè sudo X -configure
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again
Please consult the The X.Org Foundation support at http://wiki.x.org for help
ddxSigGiveUp: Closing log
Dopo il terzo comando cioè sudo cp xorg.conf.new /etc/X11/xorg.conf
dice cp: impossibile fare stat di 'xorg.conf.new': Nessun file o directory
ora sembra che riavviando Ubuntu parta sempre, però Errore controller pci all'avvio c'è sempre
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
Come prima, c' è gnome ( l' interfaccia grafica ) attiva: devi disattivarla prima di configurare la grafica.
Per farlo dai:
e poi prosegui coi comandi come prima:
Per farlo dai:
Codice: Seleziona tutto
sudo /etc/init.d/gdm stopAlka-Seltzer PLUS ha scritto: Nel caso di schermata nera, ( dejavù ), riconfigura la grafica come è stato fatto prima:
Alka-Seltzer PLUS ha scritto: Allora ... accedi ad una recovery mode e poi scegli dal successivo menù "drop to shell prompt"
Una volta che sei nell' interfaccia di testo dai nell' ordine (rispettando maiuscole, minuscole e spazi ):
Se dopo aver dato questo primo comando il terminale ti dà errore di file inesistente prosegui serenamente coi successivi:Codice: Seleziona tutto
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.bak
Codice: Seleziona tutto
sudo X -configureCodice: Seleziona tutto
sudo cp xorg.conf.new /etc/X11/xorg.confbisogna andare a scoprire a cosa si riferisce quell' errore ...Codice: Seleziona tutto
sudo reboot
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
senti però ora funziona tutto bene, non è che se faccio questa procedura poi nn parte +?
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
Fammi il punto della situazione dicendomi come hai installato i driver e postando il risultato ( in codce !! ) del comando
Codice: Seleziona tutto
cat /etc/X11/xorg.conf| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
i driver li ho installati tramite "driver hardware".... ecco il risultato in codice
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Default Device"
Driver "fglrx"
EndSection
è tutto ok?
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Default Device"
Driver "fglrx"
EndSection
è tutto ok?
Ultima modifica di zennor il domenica 4 luglio 2010, 22:50, modificato 1 volta in totale.
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
E' un po' scarno ... ti mostro il mio ( stessa scheda ) in codice:
Comunque, se va tutto bene, lasciamo perdere 
Ultima cosa: posta il risultato di:
Codice: Seleziona tutto
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionUltima cosa: posta il risultato di:
Codice: Seleziona tutto
glxinfo | grep rendering| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
dice che glxinfo non è installato, che se voglio posso installarlo digitando un comando...che faccio?
hai lo stesso notebook?
hai lo stesso notebook?
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
No, ho la stessa scheda video ( circa ) però 
Se ti dice di installare "mesa-utils" con il comando:
allora va bene 
Se ti dice di installare "mesa-utils" con il comando:
Codice: Seleziona tutto
sudo apt-get install mesa-utils| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
nel senso che devo installarlo?
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
Sì
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
Roger
eseguo e posto risultato
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
ho installato mesa, poi ho eseguito il comando glxinfo | grep rendering
dice direct rendering: Yes
che significa? che è tutto ok?
dice direct rendering: Yes
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
Sì dovrebbe ... non so se l' opzione "nomodeset" vada mantenuta nel grub, in teoria no ..
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
in ogni caso io non mi metto a modificare nulla, funziona bene cosi nomodeset o no, quindi lascio tutto cosi che dici? 
- Alka-Seltzer PLUS
- Rampante Reduce

- Messaggi: 8887
- Iscrizione: venerdì 18 settembre 2009, 13:29
- Desktop: Unity + Gnome flashback
- Distribuzione: Ubuntu 16.04 & 14.04 64bit
Re: [Driver] Compaq 615: Ubuntu non parte dopo il grub!!!!
beh .. puoi sempre provare: ormai la procedura la conosci 
se non lo ritieni opportuno metti risolto al titolo del tuo primo post
se non lo ritieni opportuno metti risolto al titolo del tuo primo post
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Chi c’è in linea
Visualizzano questa sezione: Majestic-12 [Bot] e 9 ospiti