adattatore usb - irda

Riconoscimento, installazione e configurazione delle periferiche.
Scrivi risposta
marlon
Prode Principiante
Messaggi: 21
Iscrizione: domenica 3 settembre 2006, 22:26

adattatore usb - irda

Messaggio da marlon »

ciao a tutti,

sto tentando di utilizzare con lirc un adattatore USB to IrDA; collegando l'adattatore, dmesg mi restituisce questo:

Codice: Seleziona tutto

[  118.760019] usb 5-2: new full speed USB device using uhci_hcd and address 2
[  118.918393] usb 5-2: configuration #1 chosen from 1 choice
[  118.982820] usbcore: registered new interface driver usbserial
[  118.983439] USB Serial support registered for generic
[  118.983564] usbcore: registered new interface driver usbserial_generic
[  118.983569] usbserial: USB Serial Driver core
[  118.996834] USB Serial support registered for pl2303
[  118.997277] pl2303 5-2:1.0: pl2303 converter detected
[  119.009479] usb 5-2: pl2303 converter now attached to ttyUSB0
[  119.009507] usbcore: registered new interface driver pl2303
[  119.009510] pl2303: Prolific PL2303 USB to serial adaptor driver
e questo è l'output di lsusb:

Codice: Seleziona tutto

Bus 005 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x067b Prolific Technology, Inc.
  idProduct          0x2303 PL2303 Serial Port
  bcdDevice            3.00
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
cannot read device status, Operation not permitted (1)
Come potete vedere viene rilevato come adattatore di porta seriale; significa che non è compatibile con linux? Grazie.
Ultima modifica di marlon il mercoledì 21 luglio 2010, 14:04, modificato 1 volta in totale.
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: nick091 e 10 ospiti