penneta per tv empire dvb usb2

Riconoscimento, installazione e configurazione delle periferiche.
taz90
Prode Principiante
Messaggi: 7
Iscrizione: venerdì 6 agosto 2010, 4:36

penneta per tv empire dvb usb2

Messaggio da taz90 »

salve ragazzi ho istallato da poco ubuntu 10.4, mi sto trovando molto bene però ogni tanto mi perdo e devo richiedere il vostro aiuto; ho inserito la penna per la tv ma nn me la segnala da nessuna parte, leggendo alcuni post di altri ragazzi ho visto che bisogna pubblicare i seguenti dati:

Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 006: ID eb1a:e310 eMPIA Technology, Inc.
Bus 002 Device 002: ID 5986:0180 Acer, Inc
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


e successivamente questi:

[ 4384.287549] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 4384.287570] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287591] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287612] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 4384.287633] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 44 00
[ 4384.287654] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 4384.287675] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287696] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287717] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287738] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287759] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287780] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287801] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287824] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x166a0441
[ 4384.287828] em28xx #0: EEPROM info:
[ 4384.287831] em28xx #0: AC97 audio (5 sample rates)
[ 4384.287834] em28xx #0: 500mA max power
[ 4384.287839] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 4384.288595] em28xx #0: Identified as MSI DigiVox A/D (card=49)
[ 4384.288600] em28xx #0: Your board has no unique USB ID.
[ 4384.288603] em28xx #0: A hint were successfully done, based on eeprom hash.
[ 4384.288609] em28xx #0: This method is not 100% failproof.
[ 4384.288613] em28xx #0: If the board were missdetected, please email this log to:
[ 4384.288617] em28xx #0: V4L Mailing List 
[ 4384.288622] em28xx #0: Board detected as Empire dual TV
[ 4384.384450] tvp5150 5-005c: chip found @ 0xb8 (em28xx #0)
[ 4384.389582] tuner 5-0061: chip found @ 0xc2 (em28xx #0)
[ 4384.389757] xc2028 5-0061: creating new instance
[ 4384.389762] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[ 4384.389776] usb 2-1: firmware: requesting xc3028-v27.fw
[ 4384.394044] xc2028 5-0061: Error: firmware xc3028-v27.fw not found.
[ 4384.394522] em28xx #0: Config register raw data: 0xd0
[ 4384.395475] em28xx #0: AC97 vendor ID = 0xffffffff
[ 4384.396452] em28xx #0: AC97 features = 0x6a90
[ 4384.396459] em28xx #0: Empia 202 AC97 audio processor detected
[ 4384.551701] tvp5150 5-005c: tvp5150am1 detected.
[ 4384.652222] em28xx #0: v4l2 driver version 0.1.2
[ 4384.759715] em28xx #0: V4L2 video device registered as /dev/video1
[ 4384.759719] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[ 4384.759722] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 4384.759723] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 4384.802179] xc2028 5-0061: attaching existing instance
[ 4384.802185] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[ 4384.802187] em28xx #0/2: xc3028 attached
[ 4384.802190] DVB: registering new adapter (em28xx #0)
[ 4384.802194] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 4384.803124] Successfully loaded em28xx-dvb
[ 4384.821895] em28xx video device (eb1a:e310): interface 1, class 255 found.
[ 4384.821900] em28xx This is an anciliary interface not used by the driver
[ 4384.941707] tvp5150 5-005c: tvp5150am1 detected.

vi ringrazio spero si possa fare qualcosa.
Avatar utente
frezli
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 612
Iscrizione: lunedì 17 dicembre 2007, 20:58
Località: padova

Re: penneta per tv empire dvb usb2

Messaggio da frezli »

infila la chiavetta installa kaffeine , avvia kaffeine e vedi se funziona.
Se non funzia penso puoi fare poco
taz90
Prode Principiante
Messaggi: 7
Iscrizione: venerdì 6 agosto 2010, 4:36

Re: penneta per tv empire dvb usb2

Messaggio da taz90 »

frezli ha scritto: infila la chiavetta installa kaffeine , avvia kaffeine e vedi se funziona.
Se non funzia penso puoi fare poco
niente non va ho provatoa a fare autoscan ma nn trova nulla
Avatar utente
olimpius
Prode Principiante
Messaggi: 2
Iscrizione: venerdì 23 ottobre 2009, 19:25

Re: penneta per tv empire dvb usb2

Messaggio da olimpius »

>:(  Io ho lo stesso problemma cioe un chip.

Bus 004 Device 002: ID eb1a:e310 eMPIA Technology, Inc.

A quanto ne so dobiamo cercare il firmware giusto... ma midispiace fino adesso non ho trovato niente comunque ci sono anche altri utenti nella stessa barca. Ti consiglio di seguire la questione su

http://forum.ubuntu-it.org/viewtopic.ph ... msg1326264

(b2b) troveremo un modo ...
non esistono cose dificili ma solo cose che non vogliamo fare ...
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: nick091, steff, tropie e 5 ospiti