penneta per tv empire dvb usb2
Inviato: domenica 15 agosto 2010, 0:47
salve ragazzi ho istallato da poco ubuntu 10.4, mi sto trovando molto bene però ogni tanto mi perdo e devo richiedere il vostro aiuto; ho inserito la penna per la tv ma nn me la segnala da nessuna parte, leggendo alcuni post di altri ragazzi ho visto che bisogna pubblicare i seguenti dati:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 006: ID eb1a:e310 eMPIA Technology, Inc.
Bus 002 Device 002: ID 5986:0180 Acer, Inc
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
e successivamente questi:
[ 4384.287549] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 4384.287570] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287591] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287612] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 4384.287633] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 44 00
[ 4384.287654] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 4384.287675] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287696] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287717] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287738] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287759] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287780] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287801] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287824] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x166a0441
[ 4384.287828] em28xx #0: EEPROM info:
[ 4384.287831] em28xx #0: AC97 audio (5 sample rates)
[ 4384.287834] em28xx #0: 500mA max power
[ 4384.287839] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 4384.288595] em28xx #0: Identified as MSI DigiVox A/D (card=49)
[ 4384.288600] em28xx #0: Your board has no unique USB ID.
[ 4384.288603] em28xx #0: A hint were successfully done, based on eeprom hash.
[ 4384.288609] em28xx #0: This method is not 100% failproof.
[ 4384.288613] em28xx #0: If the board were missdetected, please email this log to:
[ 4384.288617] em28xx #0: V4L Mailing List
[ 4384.288622] em28xx #0: Board detected as Empire dual TV
[ 4384.384450] tvp5150 5-005c: chip found @ 0xb8 (em28xx #0)
[ 4384.389582] tuner 5-0061: chip found @ 0xc2 (em28xx #0)
[ 4384.389757] xc2028 5-0061: creating new instance
[ 4384.389762] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[ 4384.389776] usb 2-1: firmware: requesting xc3028-v27.fw
[ 4384.394044] xc2028 5-0061: Error: firmware xc3028-v27.fw not found.
[ 4384.394522] em28xx #0: Config register raw data: 0xd0
[ 4384.395475] em28xx #0: AC97 vendor ID = 0xffffffff
[ 4384.396452] em28xx #0: AC97 features = 0x6a90
[ 4384.396459] em28xx #0: Empia 202 AC97 audio processor detected
[ 4384.551701] tvp5150 5-005c: tvp5150am1 detected.
[ 4384.652222] em28xx #0: v4l2 driver version 0.1.2
[ 4384.759715] em28xx #0: V4L2 video device registered as /dev/video1
[ 4384.759719] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[ 4384.759722] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 4384.759723] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 4384.802179] xc2028 5-0061: attaching existing instance
[ 4384.802185] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[ 4384.802187] em28xx #0/2: xc3028 attached
[ 4384.802190] DVB: registering new adapter (em28xx #0)
[ 4384.802194] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 4384.803124] Successfully loaded em28xx-dvb
[ 4384.821895] em28xx video device (eb1a:e310): interface 1, class 255 found.
[ 4384.821900] em28xx This is an anciliary interface not used by the driver
[ 4384.941707] tvp5150 5-005c: tvp5150am1 detected.
vi ringrazio spero si possa fare qualcosa.
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 006: ID eb1a:e310 eMPIA Technology, Inc.
Bus 002 Device 002: ID 5986:0180 Acer, Inc
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
e successivamente questi:
[ 4384.287549] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 4384.287570] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287591] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287612] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 4384.287633] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 44 00
[ 4384.287654] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 4384.287675] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287696] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287717] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287738] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287759] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287780] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287801] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4384.287824] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x166a0441
[ 4384.287828] em28xx #0: EEPROM info:
[ 4384.287831] em28xx #0: AC97 audio (5 sample rates)
[ 4384.287834] em28xx #0: 500mA max power
[ 4384.287839] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 4384.288595] em28xx #0: Identified as MSI DigiVox A/D (card=49)
[ 4384.288600] em28xx #0: Your board has no unique USB ID.
[ 4384.288603] em28xx #0: A hint were successfully done, based on eeprom hash.
[ 4384.288609] em28xx #0: This method is not 100% failproof.
[ 4384.288613] em28xx #0: If the board were missdetected, please email this log to:
[ 4384.288617] em28xx #0: V4L Mailing List
[ 4384.288622] em28xx #0: Board detected as Empire dual TV
[ 4384.384450] tvp5150 5-005c: chip found @ 0xb8 (em28xx #0)
[ 4384.389582] tuner 5-0061: chip found @ 0xc2 (em28xx #0)
[ 4384.389757] xc2028 5-0061: creating new instance
[ 4384.389762] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[ 4384.389776] usb 2-1: firmware: requesting xc3028-v27.fw
[ 4384.394044] xc2028 5-0061: Error: firmware xc3028-v27.fw not found.
[ 4384.394522] em28xx #0: Config register raw data: 0xd0
[ 4384.395475] em28xx #0: AC97 vendor ID = 0xffffffff
[ 4384.396452] em28xx #0: AC97 features = 0x6a90
[ 4384.396459] em28xx #0: Empia 202 AC97 audio processor detected
[ 4384.551701] tvp5150 5-005c: tvp5150am1 detected.
[ 4384.652222] em28xx #0: v4l2 driver version 0.1.2
[ 4384.759715] em28xx #0: V4L2 video device registered as /dev/video1
[ 4384.759719] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[ 4384.759722] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 4384.759723] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 4384.802179] xc2028 5-0061: attaching existing instance
[ 4384.802185] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[ 4384.802187] em28xx #0/2: xc3028 attached
[ 4384.802190] DVB: registering new adapter (em28xx #0)
[ 4384.802194] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 4384.803124] Successfully loaded em28xx-dvb
[ 4384.821895] em28xx video device (eb1a:e310): interface 1, class 255 found.
[ 4384.821900] em28xx This is an anciliary interface not used by the driver
[ 4384.941707] tvp5150 5-005c: tvp5150am1 detected.
vi ringrazio spero si possa fare qualcosa.