Codice: Seleziona tutto
[ 0.301560] pci 0000:00:06.0: PCI bridge, secondary bus 0000:06
[ 0.301562] pci 0000:00:06.0: IO window: disabled
[ 0.301567] pci 0000:00:06.0: MEM window: disabled
[ 0.301572] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.301578] pci 0000:00:07.0: PCI bridge, secondary bus 0000:07
[ 0.301581] pci 0000:00:07.0: IO window: disabled
[ 0.301586] pci 0000:00:07.0: MEM window: disabled
[ 0.301590] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.301620] pci 0000:08:01.0: CardBus bridge, secondary bus 0000:09
[ 0.301623] pci 0000:08:01.0: IO window: 0x00a000-0x00a0ff
[ 0.301630] pci 0000:08:01.0: IO window: 0x00a400-0x00a4ff
[ 0.301638] pci 0000:08:01.0: PREFETCH window: 0xd0000000-0xd3ffffff
[ 0.301645] pci 0000:08:01.0: MEM window: 0x78000000-0x7bffffff
[ 0.301653] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
[ 0.301658] pci 0000:00:14.4: IO window: 0xa000-0xbfff
[ 0.301666] pci 0000:00:14.4: MEM window: 0xfca00000-0xfeafffff
[ 0.301673] pci 0000:00:14.4: PREFETCH window: 0xcff00000-0xdfefffff
[ 0.301706] pci 0000:00:04.0: setting latency timer to 64
[ 0.301717] pci 0000:00:05.0: setting latency timer to 64
[ 0.301728] pci 0000:00:06.0: setting latency timer to 64
[ 0.301739] pci 0000:00:07.0: setting latency timer to 64
[ 0.301782] alloc irq_desc for 21 on node -1
[ 0.301784] alloc kstat_irqs on node -1
[ 0.301804] pci 0000:08:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.301823] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.301827] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.301831] pci_bus 0000:01: resource 0 io: [0x7000-0x7fff]
[ 0.301834] pci_bus 0000:01: resource 1 mem: [0xf8800000-0xf88fffff]
[ 0.301837] pci_bus 0000:01: resource 2 pref mem [0x8ff00000-0xafefffff]
[ 0.301841] pci_bus 0000:02: resource 1 mem: [0xf8900000-0xf89fffff]
[ 0.301844] pci_bus 0000:03: resource 0 io: [0x8000-0x9fff]
[ 0.301847] pci_bus 0000:03: resource 1 mem: [0xf8a00000-0xfc9fffff]
[ 0.301850] pci_bus 0000:03: resource 2 pref mem [0xaff00000-0xcfefffff]
[ 0.301854] pci_bus 0000:08: resource 0 io: [0xa000-0xbfff]
[ 0.301857] pci_bus 0000:08: resource 1 mem: [0xfca00000-0xfeafffff]
[ 0.301861] pci_bus 0000:08: resource 2 pref mem [0xcff00000-0xdfefffff]
[ 0.301864] pci_bus 0000:08: resource 3 io: [0x00-0xffff]
[ 0.301867] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[ 0.301870] pci_bus 0000:09: resource 0 io: [0xa000-0xa0ff]
[ 0.301873] pci_bus 0000:09: resource 1 io: [0xa400-0xa4ff]
[ 0.301876] pci_bus 0000:09: resource 2 pref mem [0xd0000000-0xd3ffffff]
[ 0.301879] pci_bus 0000:09: resource 3 mem: [0x78000000-0x7bffffff]
[ 0.301947] NET: Registered protocol family 2
[ 0.302114] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.302682] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.304184] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.305349] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.305353] TCP reno registered
[ 0.305572] NET: Registered protocol family 1
[ 0.305610] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.427201] pci 0000:01:05.0: Boot video device
[ 0.427267] Simple Boot Flag at 0xff set to 0x1
[ 0.427504] cpufreq-nforce2: No nForce2 chipset.
[ 0.427544] Scanning for low memory corruption every 60 seconds
[ 0.427748] audit: initializing netlink socket (disabled)
[ 0.427775] type=2000 audit(1281993087.427:1): initialized
[ 0.440504] highmem bounce pool size: 64 pages
[ 0.440512] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.442649] VFS: Disk quotas dquot_6.5.2
[ 0.442763] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.443629] fuse init (API version 7.13)
[ 0.443754] msgmni has been set to 1693
[ 0.444135] alg: No test for stdrng (krng)
[ 0.444228] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.444233] io scheduler noop registered
[ 0.444236] io scheduler anticipatory registered
[ 0.444239] io scheduler deadline registered
[ 0.444293] io scheduler cfq registered (default)
[ 0.444552] alloc irq_desc for 24 on node -1
[ 0.444555] alloc kstat_irqs on node -1
[ 0.444569] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
[ 0.444579] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.444707] alloc irq_desc for 25 on node -1
[ 0.444709] alloc kstat_irqs on node -1
[ 0.444717] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
[ 0.444726] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.444866] alloc irq_desc for 26 on node -1
[ 0.444869] alloc kstat_irqs on node -1
[ 0.444876] pcieport 0000:00:06.0: irq 26 for MSI/MSI-X
[ 0.444885] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.445020] alloc irq_desc for 27 on node -1
[ 0.445022] alloc kstat_irqs on node -1
[ 0.445029] pcieport 0000:00:07.0: irq 27 for MSI/MSI-X
[ 0.445038] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.445125] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.445255] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.445478] ACPI: AC Adapter [AC0] (on-line)
[ 0.445584] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.447615] ACPI: Lid Switch [LID]
[ 0.447692] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.447700] ACPI: Power Button [PWRB]
[ 0.447760] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.447767] ACPI: Sleep Button [SLPB]
[ 0.447821] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.447824] ACPI: Power Button [PWRF]
[ 0.449189] ACPI: SSDT 77fbe2a0 00D1C (v01 AMI CPU1PM 00000001 INTL 20051117)
[ 0.450505] Marking TSC unstable due to TSC halts in idle
[ 0.450662] processor LNXCPU:00: registered as cooling_device0
[ 0.451489] ACPI: SSDT 77fbefc0 00D1C (v01 AMI CPU2PM 00000001 INTL 20051117)
[ 0.452876] processor LNXCPU:01: registered as cooling_device1
[ 0.455167] Switching to clocksource acpi_pm
[ 0.458178] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.458201] ACPI: Thermal Zone [THRM] (60 C)
[ 0.460425] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.462340] brd: module loaded
[ 0.462968] loop: module loaded
[ 0.463108] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.463367] alloc irq_desc for 16 on node -1
[ 0.463370] alloc kstat_irqs on node -1
[ 0.463382] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.463450] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 0.463858] Fixed MDIO Bus: probed
[ 0.463906] PPP generic driver version 2.4.2
[ 0.463963] tun: Universal TUN/TAP device driver, 1.6
[ 0.463966] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.464126] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.464175] alloc irq_desc for 19 on node -1
[ 0.464178] alloc kstat_irqs on node -1
[ 0.464184] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.464220] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 0.464262] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 0.464299] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 0.464320] ehci_hcd 0000:00:13.5: debug port 1
[ 0.464349] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfebff800
[ 0.464808] isapnp: Scanning for PnP cards...
[ 0.509906] Freeing initrd memory: 7778k freed
[ 0.514937] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 0.516005] usb usb1: configuration #1 chosen from 1 choice
[ 0.516254] hub 1-0:1.0: USB hub found
[ 0.516316] hub 1-0:1.0: 10 ports detected
[ 0.516580] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.516715] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.516832] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.517040] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.517178] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfebfe000
[ 0.609371] usb usb2: configuration #1 chosen from 1 choice
[ 0.609418] hub 2-0:1.0: USB hub found
[ 0.609459] hub 2-0:1.0: 2 ports detected
[ 0.609567] alloc irq_desc for 17 on node -1
[ 0.609570] alloc kstat_irqs on node -1
[ 0.609584] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.609632] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.609692] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.609737] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfebfd000
[ 0.701386] usb usb3: configuration #1 chosen from 1 choice
[ 0.701420] hub 3-0:1.0: USB hub found
[ 0.701436] hub 3-0:1.0: 2 ports detected
[ 0.701506] alloc irq_desc for 18 on node -1
[ 0.701508] alloc kstat_irqs on node -1
[ 0.701515] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.701531] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 0.701644] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 0.701699] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfebfc000
[ 0.792919] usb usb4: configuration #1 chosen from 1 choice
[ 0.793021] hub 4-0:1.0: USB hub found
[ 0.793037] hub 4-0:1.0: 2 ports detected
[ 0.793195] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.793210] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 0.793342] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 0.793387] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfebfb000
[ 0.837069] isapnp: No Plug & Play device found
[ 0.852200] usb usb5: configuration #1 chosen from 1 choice
[ 0.852236] hub 5-0:1.0: USB hub found
[ 0.852250] hub 5-0:1.0: 2 ports detected
[ 0.852319] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.852335] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 0.852378] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 0.852400] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfebfa000
[ 0.856398] ACPI: Battery Slot [BAT0] (battery present)
[ 0.912126] usb usb6: configuration #1 chosen from 1 choice
[ 0.912167] hub 6-0:1.0: USB hub found
[ 0.912180] hub 6-0:1.0: 2 ports detected
[ 0.912256] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.912402] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.914766] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.915433] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.915441] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.915484] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.915512] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.915539] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.915699] mice: PS/2 mouse device common for all mice
[ 0.915907] rtc_cmos 00:02: RTC can wake from S4
[ 0.915967] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.915997] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.916158] device-mapper: uevent: version 1.0.3
[ 0.916334] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.916447] device-mapper: multipath: version 1.1.0 loaded
[ 0.916451] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.916609] EISA: Probing bus 0 at eisa.0
[ 0.916634] Cannot allocate resource for EISA slot 4
[ 0.916646] Cannot allocate resource for EISA slot 7
[ 0.916649] Cannot allocate resource for EISA slot 8
[ 0.916651] EISA: Detected 0 cards.
[ 0.916872] cpuidle: using governor ladder
[ 0.916994] cpuidle: using governor menu
[ 0.917610] TCP cubic registered
[ 0.917807] NET: Registered protocol family 10
[ 0.918450] lo: Disabled Privacy Extensions
[ 0.918932] NET: Registered protocol family 17
[ 0.931463] Using IPI No-Shortcut mode
[ 0.931576] PM: Resume from disk failed.
[ 0.931595] registered taskstats version 1
[ 0.932116] Magic number: 6:60:197
[ 0.932191] acpi PNP0100:00: hash matches
[ 0.932252] rtc_cmos 00:02: setting system clock to 2010-08-16 21:11:28 UTC (1281993088)
[ 0.932256] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.932258] EDD information not available.
[ 0.932336] Freeing unused kernel memory: 660k freed
[ 0.932999] Write protecting the kernel text: 4680k
[ 0.933068] Write protecting the kernel read-only data: 1840k
[ 0.948156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.959033] udev: starting version 151
[ 1.120100] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 1.136398] ahci 0000:00:12.0: version 3.0
[ 1.136431] alloc irq_desc for 22 on node -1
[ 1.136434] alloc kstat_irqs on node -1
[ 1.136444] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.136488] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.136611] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.136616] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.139364] scsi0 : ahci
[ 1.139651] scsi1 : ahci
[ 1.139802] scsi2 : ahci
[ 1.139933] scsi3 : ahci
[ 1.140164] ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 22
[ 1.140169] ata2: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 22
[ 1.140174] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 22
[ 1.140178] ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 22
[ 1.140690] scsi4 : pata_atiixp
[ 1.140836] scsi5 : pata_atiixp
[ 1.142143] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.142147] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.281249] usb 2-1: configuration #1 chosen from 1 choice
[ 1.308603] ata5.01: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WR02, max UDMA/33
[ 1.324558] ata5.01: configured for UDMA/33
[ 1.460082] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.460131] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.464074] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.624062] ata1: softreset failed (device not ready)
[ 1.624066] ata1: applying SB600 PMP SRST workaround and retrying
[ 1.788075] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.789282] ata1.00: ATA-8: Hitachi HTS542512K9SA00, BB2OC31P, max UDMA/133
[ 1.789285] ata1.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.789317] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.790740] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.790743] ata1.00: configured for UDMA/133
[ 1.790928] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54251 BB2O PQ: 0 ANSI: 5
[ 1.791177] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.791472] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.791531] sd 0:0:0:0: [sda] Write Protect is off
[ 1.791535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.791565] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.791750] sda:
[ 1.794925] scsi 4:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WR02 PQ: 0 ANSI: 5
[ 1.806198] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.806203] Uniform CD-ROM driver Revision: 3.20
[ 1.806351] sr 4:0:1:0: Attached scsi CD-ROM sr0
[ 1.806447] sr 4:0:1:0: Attached scsi generic sg1 type 5
[ 1.812316] sda1 sda2 < sda5 >
[ 1.835305] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.967438] usbcore: registered new interface driver hiddev
[ 1.969454] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.969494] 8139cp 0000:08:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.972428] input: HID 062a:0000 as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input6
[ 1.972569] generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:13.0-1/input0
[ 1.972613] usbcore: registered new interface driver usbhid
[ 1.972617] usbhid: v2.6:USB HID core driver
[ 1.973914] 8139too Fast Ethernet driver 0.9.28
[ 1.973996] alloc irq_desc for 20 on node -1
[ 1.973999] alloc kstat_irqs on node -1
[ 1.974009] 8139too 0000:08:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.976141] eth0: RealTek RTL8139 at 0xb800, 00:1e:8c:89:1e:ed, IRQ 20
[ 26.170392] udev: starting version 151
[ 26.289566] Adding 4803392k swap on /dev/sda5. Priority:-1 extents:1 across:4803392k
[ 26.746565] lp: driver loaded but no devices found
[ 26.752869] type=1505 audit(1281993114.319:2): operation="profile_load" pid=487 name="/sbin/dhclient3"
[ 26.753787] type=1505 audit(1281993114.319:3): operation="profile_load" pid=487 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 26.754254] type=1505 audit(1281993114.319:4): operation="profile_load" pid=487 name="/usr/lib/connman/scripts/dhclient-script"
[ 26.995403] Linux agpgart interface v0.103
[ 27.006859] eth0: link down
[ 27.007219] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.192594] acpi device:02: registered as cooling_device2
[ 27.193190] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input7
[ 27.193418] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 27.380884] type=1505 audit(1281993114.947:5): operation="profile_replace" pid=710 name="/sbin/dhclient3"
[ 27.381778] type=1505 audit(1281993114.947:6): operation="profile_replace" pid=710 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 27.382252] type=1505 audit(1281993114.947:7): operation="profile_replace" pid=710 name="/usr/lib/connman/scripts/dhclient-script"
[ 27.393744] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 27.395499] sdhci: Secure Digital Host Controller Interface driver
[ 27.395503] sdhci: Copyright(c) Pierre Ossman
[ 27.403605] type=1505 audit(1281993114.967:8): operation="profile_load" pid=713 name="/usr/lib/cups/backend/cups-pdf"
[ 27.404643] type=1505 audit(1281993114.971:9): operation="profile_load" pid=713 name="/usr/sbin/cupsd"
[ 27.408173] type=1505 audit(1281993114.975:10): operation="profile_load" pid=714 name="/usr/sbin/mysqld-akonadi"
[ 27.410949] type=1505 audit(1281993114.975:11): operation="profile_load" pid=715 name="/usr/sbin/tcpdump"
[ 27.423059] asus_laptop: Asus Laptop Support version 0.42
[ 27.428428] asus_laptop: BSTS called, 0x7f returned
[ 27.428495] asus_laptop: X51RL model detected
[ 27.429894] input: Asus Laptop extra buttons as /devices/virtual/input/input8
[ 27.430216] sdhci-pci 0000:08:01.1: SDHCI controller found [1180:0822] (rev 18)
[ 27.430254] alloc irq_desc for 23 on node -1
[ 27.430259] alloc kstat_irqs on node -1
[ 27.430270] sdhci-pci 0000:08:01.1: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 27.431177] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[ 27.434582] Registered led device: mmc0::
[ 27.435647] mmc0: SDHCI controller on PCI [0000:08:01.1] using PIO
[ 27.449319] yenta_cardbus 0000:08:01.0: CardBus bridge found [1043:1627]
[ 27.516867] cfg80211: Calling CRDA to update world regulatory domain
[ 27.557891] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMB0 [0xb00-0xb0f]
[ 27.557897] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.580861] yenta_cardbus 0000:08:01.0: ISA IRQ mask 0x0cb8, PCI irq 21
[ 27.580867] yenta_cardbus 0000:08:01.0: Socket status: 30000006
[ 27.580873] pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c
[ 27.580886] yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
[ 27.580891] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xbfff: clean.
[ 27.581509] yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge Memory window: 0xfca00000 - 0xfeafffff
[ 27.581512] yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xdfefffff
[ 27.619996] cfg80211: World regulatory domain updated:
[ 27.620035] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.620039] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.620042] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.620046] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.620049] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.620052] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.689028] [drm] Initialized drm 1.1.0 20060810
[ 27.849967] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 27.849983] ath5k 0000:02:00.0: setting latency timer to 64
[ 27.850062] ath5k 0000:02:00.0: registered as 'phy0'
[ 28.167539] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 28.207887] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 28.346480] ath: EEPROM regdomain: 0x60
[ 28.346484] ath: EEPROM indicates we should expect a direct regpair map
[ 28.346490] ath: Country alpha2 being used: 00
[ 28.346492] ath: Regpair used: 0x60
[ 28.510190] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 28.512530] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 28.513599] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 28.513989] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 28.514870] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 28.618497] [drm] radeon defaulting to kernel modesetting.
[ 28.618503] [drm] radeon kernel modesetting enabled.
[ 28.618604] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 28.622923] [drm] radeon: Initializing kernel modesetting.
[ 28.623188] [drm] register mmio base: 0xF88F0000
[ 28.623191] [drm] register mmio size: 65536
[ 28.623546] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 28.623566] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
[ 28.623620] [drm] Generation 2 PCI interface, using max accessible memory
[ 28.623624] [drm] radeon: VRAM 128M
[ 28.623627] [drm] radeon: VRAM from 0x78000000 to 0x7FFFFFFF
[ 28.623629] [drm] radeon: GTT 32M
[ 28.623631] [drm] radeon: GTT from 0x80000000 to 0x81FFFFFF
[ 28.623678] [drm] radeon: irq initialized.
[ 28.623692] [drm] Detected VRAM RAM=128M, BAR=256M
[ 28.623695] [drm] RAM width 128bits DDR
[ 28.623793] [TTM] Zone kernel: Available graphics memory: 437758 kiB.
[ 28.623796] [TTM] Zone highmem: Available graphics memory: 965970 kiB.
[ 28.623831] [drm] radeon: 128M of VRAM memory ready
[ 28.623834] [drm] radeon: 32M of GTT memory ready.
[ 28.623846] [drm] GART: num cpu pages 8192, num gpu pages 8192
[ 28.624947] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
[ 28.624971] [drm] radeon: cp idle (0x10000C03)
[ 28.625046] [drm] Loading R300 Microcode
[ 28.625054] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 28.731946] [drm] radeon: ring at 0x0000000080000000
[ 28.731974] [drm] ring test succeeded in 1 usecs
[ 28.732184] [drm] radeon: ib pool ready.
[ 28.732291] [drm] ib test succeeded in 0 usecs
[ 28.732484] [drm] Panel ID String: AUO
[ 28.732487] [drm] Panel Size 1280x800
[ 28.732562] [drm] Radeon Display Connectors
[ 28.732565] [drm] Connector 0:
[ 28.732567] [drm] VGA
[ 28.732570] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 28.732572] [drm] Encoders:
[ 28.732575] [drm] CRT1: INTERNAL_DAC2
[ 28.732577] [drm] Connector 1:
[ 28.732579] [drm] LVDS
[ 28.732582] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[ 28.732584] [drm] Encoders:
[ 28.732587] [drm] LCD1: INTERNAL_LVDS
[ 28.742419] phy0: Selected rate control algorithm 'minstrel'
[ 28.743496] Registered led device: ath5k-phy0::rx
[ 28.743527] Registered led device: ath5k-phy0::tx
[ 28.743534] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 28.838148] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.871820] [drm] fb mappable at 0x90040000
[ 28.871824] [drm] vram apper at 0x90000000
[ 28.871826] [drm] size 4096000
[ 28.871829] [drm] fb depth is 24
[ 28.871831] [drm] pitch is 5120
[ 28.871980] fb0: radeondrmfb frame buffer device
[ 28.871983] registered panic notifier
[ 28.871993] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 29.007248] vga16fb: initializing
[ 29.007257] vga16fb: mapped to 0xc00a0000
[ 29.007263] vga16fb: not registering due to another framebuffer present
[ 29.015141] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 29.129120] Console: switching to colour frame buffer device 160x50
[ 29.216871] hda_codec: ALC660-VD: BIOS auto-probing.
[ 29.217751] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 29.615976] ppdev: user-space parallel port driver
[ 33.658754] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 248.600586] usb 2-1: USB disconnect, address 2
[ 428.583384] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 428.583866] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 439.292073] eth0: no IPv6 routers present
[ 471.852095] usb 5-1: new low speed USB device using ohci_hcd and address 2
[ 472.013382] usb 5-1: configuration #1 chosen from 1 choice
[ 472.029712] input: HID 062a:0000 as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/input/input11
[ 472.031599] generic-usb 0003:062A:0000.0002: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:13.3-1/input0