Epson Stylus DX8400
Epson Stylus DX8400
Salve a tutti ho un problema per l'installazione della stampande DX8400
seguendo parte della guida di wiki http://wiki.ubuntu-it.org/Hardware/Stam ... Multi ho eseguito i seguenti punti
Installazione dei pacchetti necessari
Ho scaricato i driver dal seguente indirizzo http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do direttamente in deb . Si trovano a questo indirizzo
http://www.avasys.jp/lx-bin2/linux_e/spc/DL2.do
In particolare ho installato i file pipslite_1.4.0-5_i386.deb e iscan-data_1.0.1-1_all.deb
A questo punto stavo tentando di risolvere il punto della guida wiki
Installazione della stampante
Prima connessione
Collegare la stampante al computer e accenderla, dunque digitare il seguente comando in una finestra di terminale, necessario per avviare il servizio di stampa:
sudo /usr/share/pipslite/rc.d/inst-rc_d.sh install
sudo /etc/init.d/ekpd start
Digitando i comandi dal terminale però ottengo sudo: /usr/share/pipslite/rc.d/inst-rc_d.sh: command not found
Cosa posso fare?
seguendo parte della guida di wiki http://wiki.ubuntu-it.org/Hardware/Stam ... Multi ho eseguito i seguenti punti
Installazione dei pacchetti necessari
Ho scaricato i driver dal seguente indirizzo http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do direttamente in deb . Si trovano a questo indirizzo
http://www.avasys.jp/lx-bin2/linux_e/spc/DL2.do
In particolare ho installato i file pipslite_1.4.0-5_i386.deb e iscan-data_1.0.1-1_all.deb
A questo punto stavo tentando di risolvere il punto della guida wiki
Installazione della stampante
Prima connessione
Collegare la stampante al computer e accenderla, dunque digitare il seguente comando in una finestra di terminale, necessario per avviare il servizio di stampa:
sudo /usr/share/pipslite/rc.d/inst-rc_d.sh install
sudo /etc/init.d/ekpd start
Digitando i comandi dal terminale però ottengo sudo: /usr/share/pipslite/rc.d/inst-rc_d.sh: command not found
Cosa posso fare?
Re: Epson Stylus DX8400
ho digitato /usr/lib/pipslite/rc.d/inst-rc_d.sh install per avviare il servizio di stampa ma mi viene detto
daniele@daniele-desktop:~$ /usr/lib/pipslite/rc.d/inst-rc_d.sh install
install: impossibile rimuovere "/etc/init.d/pipslited": Permesso negato
daniele@daniele-desktop:~$ /usr/lib/pipslite/rc.d/inst-rc_d.sh install
install: impossibile rimuovere "/etc/init.d/pipslited": Permesso negato
Re: Epson Stylus DX8400
nessuno mi può aiutare ? >:(
Re: Epson Stylus DX8400
abbiamo la stessa stampante..
io non ho dovuto installare nulla!
ho ubuntu 10.04.. ho collegato la stampante al portatile, (avevo la connessione attiva) e mi ha installato tutto da solo..
senza nessun problema..
poi ho scaricato "Xsane image scanner" per utilizzare solo lo scanner et voilat!
io non ho dovuto installare nulla!
ho ubuntu 10.04.. ho collegato la stampante al portatile, (avevo la connessione attiva) e mi ha installato tutto da solo..
senza nessun problema..
poi ho scaricato "Xsane image scanner" per utilizzare solo lo scanner et voilat!
Re: Epson Stylus DX8400
a me neanche stampa!!!
ma se chiamo un tecnico epson pensate che sappia risolvere?
a me serve stampare altrimenti mi tocca ritornare a xp
ma se chiamo un tecnico epson pensate che sappia risolvere?
a me serve stampare altrimenti mi tocca ritornare a xp
Re: Epson Stylus DX8400
prova a vedere se ti può aiutare..
http://forum.ubuntu-it.org/viewtopic.php?t=376326
e questa.. inizia male, va avanti peggio, ma c'è suspance e il lieto fine
http://forum.ubuntu-it.org/viewtopic.php?t=268000
se no ti consiglio di disinstallare quello che hai trovato e dopo aver fatto un po' di pulizia riprovi a collegare la stampante..
tu l'avevi collegata prima o dopo averla installata?
http://forum.ubuntu-it.org/viewtopic.php?t=376326
e questa.. inizia male, va avanti peggio, ma c'è suspance e il lieto fine
http://forum.ubuntu-it.org/viewtopic.php?t=268000
se no ti consiglio di disinstallare quello che hai trovato e dopo aver fatto un po' di pulizia riprovi a collegare la stampante..
tu l'avevi collegata prima o dopo averla installata?
Re: Epson Stylus DX8400
allora la stampante va tranquillamente
ora il problema è lo scanner non viene riconosciuto da xsane, anche aprendolo dal terminale >:(
ora il problema è lo scanner non viene riconosciuto da xsane, anche aprendolo dal terminale >:(
Re: Epson Stylus DX8400
io ho installato anche simple scan..
i pacchetti:
libsane
sane-utils
..sono installati?
i pacchetti:
libsane
sane-utils
..sono installati?
Re: Epson Stylus DX8400
su ubuntu software center compaiono come installati
non so proprio cosa ci sia che non va
non so proprio cosa ci sia che non va
Re: Epson Stylus DX8400
nessuno può darmi una dritta?
Re: Epson Stylus DX8400
daniele@daniele-desktop:~$ sudo sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x0df6, product=0x000d [RTL8187_Wireless_LAN_Adapter]) at libusb:002:002
found USB scanner (vendor=0x04b8, product=0x0839) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x0df6, product=0x000d [RTL8187_Wireless_LAN_Adapter]) at libusb:002:002
found USB scanner (vendor=0x04b8, product=0x0839) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Re: Epson Stylus DX8400
daniele@daniele-desktop:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x0df6, product=0x000d) at libusb:002:002
found USB scanner (vendor=0x04b8, product=0x0839) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
la cosa che non torna secondo me sono le righe
found USB scanner (vendor=0x0df6, product=0x000d) at libusb:002:002
found USB scanner (vendor=0x04b8, product=0x0839) at libusb:001:004
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x0df6, product=0x000d) at libusb:002:002
found USB scanner (vendor=0x04b8, product=0x0839) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
la cosa che non torna secondo me sono le righe
found USB scanner (vendor=0x0df6, product=0x000d) at libusb:002:002
found USB scanner (vendor=0x04b8, product=0x0839) at libusb:001:004
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 7 ospiti