Pagina 1 di 1

Epson Stylus DX8400

Inviato: venerdì 20 agosto 2010, 14:04
da drapaluz
Salve a tutti ho un problema per l'installazione della stampande DX8400

seguendo parte della guida di wiki http://wiki.ubuntu-it.org/Hardware/Stam ... Multi  ho eseguito i seguenti punti

Installazione dei pacchetti necessari

Ho scaricato i driver dal seguente indirizzo http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do direttamente in deb . Si trovano a questo indirizzo
http://www.avasys.jp/lx-bin2/linux_e/spc/DL2.do
In particolare ho installato i file  pipslite_1.4.0-5_i386.deb  e iscan-data_1.0.1-1_all.deb

A questo punto stavo tentando di risolvere il punto della guida wiki
Installazione della stampante

Prima connessione

Collegare la stampante al computer e accenderla, dunque digitare il seguente comando in una finestra di terminale, necessario per avviare il servizio di stampa:

sudo /usr/share/pipslite/rc.d/inst-rc_d.sh install
sudo /etc/init.d/ekpd start

Digitando i comandi dal terminale però ottengo sudo: /usr/share/pipslite/rc.d/inst-rc_d.sh: command not found


Cosa posso fare?

Re: Epson Stylus DX8400

Inviato: venerdì 20 agosto 2010, 16:10
da drapaluz
ho digitato /usr/lib/pipslite/rc.d/inst-rc_d.sh install per avviare il servizio di stampa ma mi viene detto

daniele@daniele-desktop:~$ /usr/lib/pipslite/rc.d/inst-rc_d.sh install
install: impossibile rimuovere "/etc/init.d/pipslited": Permesso negato

Re: Epson Stylus DX8400

Inviato: venerdì 20 agosto 2010, 21:12
da drapaluz
nessuno mi può aiutare ?  >:(

Re: Epson Stylus DX8400

Inviato: sabato 21 agosto 2010, 0:30
da Bigre
abbiamo la stessa stampante..

io non ho dovuto installare nulla!

ho ubuntu 10.04.. ho collegato la stampante al portatile, (avevo la connessione attiva) e mi ha installato tutto da solo..

senza nessun problema..

poi ho scaricato "Xsane image scanner" per utilizzare solo lo scanner et voilat!

Re: Epson Stylus DX8400

Inviato: sabato 21 agosto 2010, 10:08
da drapaluz
a me neanche stampa!!!

ma se chiamo un tecnico epson pensate che sappia risolvere?

a me serve stampare altrimenti mi tocca ritornare a xp

Re: Epson Stylus DX8400

Inviato: sabato 21 agosto 2010, 12:56
da Bigre
prova a vedere se ti può aiutare..
http://forum.ubuntu-it.org/viewtopic.php?t=376326

e questa.. inizia male, va avanti peggio, ma c'è suspance e il lieto fine :D

http://forum.ubuntu-it.org/viewtopic.php?t=268000

se no ti consiglio di disinstallare quello che hai trovato e dopo aver fatto un po' di pulizia riprovi a collegare la stampante..

tu l'avevi collegata prima o dopo averla installata?

Re: Epson Stylus DX8400

Inviato: sabato 21 agosto 2010, 15:52
da drapaluz
allora la stampante va tranquillamente

ora il problema è lo scanner non viene riconosciuto da xsane, anche aprendolo dal terminale  >:(

Re: Epson Stylus DX8400

Inviato: sabato 21 agosto 2010, 23:03
da Bigre
io ho installato anche simple scan..

i pacchetti:
libsane
sane-utils
..sono installati?

Re: Epson Stylus DX8400

Inviato: domenica 22 agosto 2010, 14:19
da drapaluz
su ubuntu software center compaiono come installati

non so proprio cosa ci sia che non va

Re: Epson Stylus DX8400

Inviato: lunedì 23 agosto 2010, 20:48
da drapaluz
nessuno può darmi una dritta?

Re: Epson Stylus DX8400

Inviato: martedì 24 agosto 2010, 10:26
da drapaluz
daniele@daniele-desktop:~$ sudo sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x0df6, product=0x000d [RTL8187_Wireless_LAN_Adapter]) at libusb:002:002
found USB scanner (vendor=0x04b8, product=0x0839) at libusb:001:004
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

Re: Epson Stylus DX8400

Inviato: martedì 24 agosto 2010, 10:30
da drapaluz
daniele@daniele-desktop:~$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x0df6, product=0x000d) at libusb:002:002
found USB scanner (vendor=0x04b8, product=0x0839) at libusb:001:004
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.


la cosa che non torna secondo me sono le righe
found USB scanner (vendor=0x0df6, product=0x000d) at libusb:002:002
found USB scanner (vendor=0x04b8, product=0x0839) at libusb:001:004