Pagina 1 di 1

Chiavetta wireless

Inviato: venerdì 20 agosto 2010, 19:30
da IMO
Devo connettere il mio computer a internet tramite una connessione wireless ho fatti questi passi:
- ho inserito la chiavetta
- ho acceso il pc
- appena ho acceso mi ha chiesto di inserire il nome di una connessione a cui connettermi ed ho inserito:
NATGEAR
senza protezione
windows la trovava da sola per questo ho messo solo il nome e nient'altro.
- ho connesso a NATGEAR
mi dice che è connesso, ma non va, se vado su internet non mi carica le pagine. qual'è il problema?

Re: Chiavetta wireless

Inviato: venerdì 20 agosto 2010, 20:07
da zorro24
Ciao digita da terminale il commando ifconfig e posta il risultato

Re: Chiavetta wireless

Inviato: venerdì 20 agosto 2010, 20:40
da IMO
imo@imo-desktop:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:1e:90:43:c2:0a 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:28 Base address:0x8000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:344 errors:0 dropped:0 overruns:0 frame:0
          TX packets:344 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:27552 (27.5 KB)  TX bytes:27552 (27.5 KB)

ppp0      Link encap:Point-to-Point Protocol 
          inet addr:151.83.224.17  P-t-P:10.64.64.64  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:4250 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4682 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:2256790 (2.2 MB)  TX bytes:920871 (920.8 KB)

wlan0    Link encap:Ethernet  HWaddr 00:02:72:8a:90:9b 
          inet addr:10.42.43.1  Bcast:10.42.43.255  Mask:255.255.255.0
          inet6 addr: fe80::202:72ff:fe8a:909b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:51 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:12685 (12.6 KB)

Re: Chiavetta wireless

Inviato: venerdì 20 agosto 2010, 21:21
da zorro24
Posta anche il risultato del commando
lsusb e del commando
dmesg

Re: Chiavetta wireless

Inviato: venerdì 20 agosto 2010, 22:38
da IMO
imo@imo-desktop:~$ lsusb
Bus 002 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 020: ID 19d2:0037 ONDA Communication S.p.A.
Bus 001 Device 002: ID 0ace:1215 ZyDAS WLA-54L 802.11bg
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


[    1.300022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.300055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.301381] ata2.00: ATAPI: Optiarc DVD RW AD-7200S, 1.52, max UDMA/100
[    1.303046] ata2.00: configured for UDMA/100
[    1.342748] ata1.00: ATA-7: ST3160215AS, 3.AAC, max UDMA/133
[    1.342753] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.401079] ata1.00: configured for UDMA/133
[    1.401219] scsi 0:0:0:0: Direct-Access    ATA      ST3160215AS      3.AA PQ: 0 ANSI: 5
[    1.401402] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.401417] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.401516] sd 0:0:0:0: [sda] Write Protect is off
[    1.401519] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.401544] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.401687]  sda:
[    1.403406] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7200S  1.52 PQ: 0 ANSI: 5
[    1.405762] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.405767] Uniform CD-ROM driver Revision: 3.20
[    1.405912] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.405973] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.406131] ata6: port disabled. ignoring.
[    1.449080]  sda1 sda2 sda3 sda4
[    1.480141] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.484051] usb 2-8: new full speed USB device using ohci_hcd and address 2
[    1.707438] usb 2-8: configuration #1 chosen from 1 choice
[    1.710463] scsi7 : SCSI emulation for USB Mass Storage devices
[    1.710582] usb-storage: device found at 2
[    1.710584] usb-storage: waiting for device to settle before scanning
[    1.967715] EXT4-fs (sda6): mounted filesystem with ordered data mode
[    6.077506] usb-storage: device scan complete
[    6.080497] scsi 6:0:0:0: CD-ROM            ONDA    USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[    6.088591] sr1: scsi-1 drive
[    6.088738] sr 6:0:0:0: Attached scsi CD-ROM sr1
[    6.088802] sr 6:0:0:0: Attached scsi generic sg2 type 5
[    6.709951] usb-storage: device scan complete
[    6.716943] scsi 7:0:0:0: Direct-Access    Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    6.723951] scsi 7:0:0:1: Direct-Access    Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    6.730949] scsi 7:0:0:2: Direct-Access    Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    6.737952] scsi 7:0:0:3: Direct-Access    Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    6.738434] sd 7:0:0:0: Attached scsi generic sg3 type 0
[    6.738567] sd 7:0:0:1: Attached scsi generic sg4 type 0
[    6.738694] sd 7:0:0:2: Attached scsi generic sg5 type 0
[    6.738824] sd 7:0:0:3: Attached scsi generic sg6 type 0
[    6.792922] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[    6.803919] sd 7:0:0:1: [sdc] Attached SCSI removable disk
[    6.814917] sd 7:0:0:2: [sdd] Attached SCSI removable disk
[    6.825915] sd 7:0:0:3: [sde] Attached SCSI removable disk
[  12.338308] udev: starting version 151
[  12.374316] Adding 410616k swap on /dev/sda7.  Priority:-1 extents:1 across:410616k
[  12.530856] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[  12.530882] i2c i2c-1: nForce2 SMBus adapter at 0x4e00
[  12.539548] Linux agpgart interface v0.103
[  12.650987] [drm] Initialized drm 1.1.0 20060810
[  12.655954] lp: driver loaded but no devices found
[  12.667696] type=1505 audit(1282336205.703:2):  operation="profile_load" pid=603 name="/sbin/dhclient3"
[  12.668386] type=1505 audit(1282336205.707:3):  operation="profile_load" pid=603 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[  12.668783] type=1505 audit(1282336205.707:4):  operation="profile_load" pid=603 name="/usr/lib/connman/scripts/dhclient-script"
[  12.712614] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
[  12.712621]  alloc irq_desc for 20 on node -1
[  12.712623]  alloc kstat_irqs on node -1
[  12.712631] nouveau 0000:00:10.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
[  12.712636] nouveau 0000:00:10.0: setting latency timer to 64
[  12.715080] [drm] nouveau 0000:00:10.0: failed to evaluate _DSM: 5
[  12.731142] [drm] nouveau 0000:00:10.0: Detected an NV40 generation card (0x063000a2)
[  12.731380] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PROM
[  12.731384] [drm] nouveau 0000:00:10.0: ... BIOS signature not found
[  12.731387] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PRAMIN
[  12.772739] [drm] nouveau 0000:00:10.0: ... appears to be valid
[  12.772746] [drm] nouveau 0000:00:10.0: BIT BIOS found
[  12.772750] [drm] nouveau 0000:00:10.0: Bios version 05.73.32.09
[  12.772753] [drm] nouveau 0000:00:10.0: TMDS table script pointers not stubbed
[  12.772756] [drm] nouveau 0000:00:10.0: BIT table 'd' not found
[  12.772759] [drm] nouveau 0000:00:10.0: Found Display Configuration Block version 3.0
[  12.772762] [drm] nouveau 0000:00:10.0: DCB connector table: VHER 0x30 5 10 2
[  12.772766] [drm] nouveau 0000:00:10.0:  0: 0x00000000: type 0x00 idx 0 tag 0xff
[  12.772769] [drm] nouveau 0000:00:10.0:  1: 0x00001161: type 0x61 idx 1 tag 0x07
[  12.772772] [drm] nouveau 0000:00:10.0: Raw DCB entry 0: 01000110 00000023
[  12.772779] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 0 at offset 0xCDAD
[  12.772798] [drm] nouveau 0000:00:10.0: ======= misaligned reg 0x001020FB =======
[  12.772862] [drm] nouveau 0000:00:10.0: ======= misaligned reg 0x001020FB =======
[  12.772944] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 1 at offset 0xCEF9
[  12.772946] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 2 at offset 0xCEFA
[  12.772969] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 3 at offset 0xD07C
[  12.772975] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 4 at offset 0xD112
[  12.772978] [drm] nouveau 0000:00:10.0: Pointer to flat panel table invalid
[  12.791193] [TTM] Zone  kernel: Available graphics memory: 438538 kiB.
[  12.791197] [TTM] Zone highmem: Available graphics memory: 901198 kiB.
[  12.791209] [drm] nouveau 0000:00:10.0: 256 MiB VRAM
[  12.792453] [drm] nouveau 0000:00:10.0: 64 MiB GART (aperture)
[  12.792927] [drm] nouveau 0000:00:10.0: Allocating FIFO number 0
[  12.793277] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FIFO 0
[  12.793285] [drm] nouveau 0000:00:10.0: Initial CRTC_OWNER is 0
[  12.793290] [drm] nouveau 0000:00:10.0: Saving VGA fonts
[  12.829359] [drm] nouveau 0000:00:10.0: Detected a VGA connector
[  12.830533] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (output 0)
[  12.882769] psmouse serio1: ID: 10 00 64
[  12.952343] [drm] nouveau 0000:00:10.0: allocated 1440x900 fb: 0x49000, bo f40d9800
[  12.952545] fb0: nouveaufb frame buffer device
[  12.952548] registered panic notifier
[  12.952554] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:10.0 on minor 0
[  12.952641] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[  12.952674] HDA Intel 0000:00:09.0: power state changed by ACPI to D0
[  12.953004] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[  12.953010] HDA Intel 0000:00:09.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
[  12.953013] hda_intel: Disable MSI for Nvidia chipset
[  12.953035] HDA Intel 0000:00:09.0: setting latency timer to 64
[  13.042821] vga16fb: initializing
[  13.042827] vga16fb: mapped to 0xc00a0000
[  13.042831] vga16fb: not registering due to another framebuffer present
[  13.045631] cfg80211: Calling CRDA to update world regulatory domain
[  13.119854] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on vga encoder (output 0)
[  13.119860] [drm] nouveau 0000:00:10.0: Output VGA-1 is running on CRTC 0 using output A
[  13.126760] Console: switching to colour frame buffer device 180x56
[  13.318135] cfg80211: World regulatory domain updated:
[  13.318139] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  13.318142] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  13.318145] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  13.318147] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  13.318150] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  13.318152] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  13.380928] type=1505 audit(1282336206.419:5):  operation="profile_load" pid=820 name="/usr/share/gdm/guest-session/Xsession"
[  13.383054] type=1505 audit(1282336206.419:6):  operation="profile_replace" pid=821 name="/sbin/dhclient3"
[  13.383779] type=1505 audit(1282336206.419:7):  operation="profile_replace" pid=821 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[  13.384175] type=1505 audit(1282336206.423:8):  operation="profile_replace" pid=821 name="/usr/lib/connman/scripts/dhclient-script"
[  13.386923] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[  13.389659] type=1505 audit(1282336206.427:9):  operation="profile_load" pid=822 name="/usr/bin/evince"
[  13.398745] type=1505 audit(1282336206.435:10):  operation="profile_load" pid=822 name="/usr/bin/evince-previewer"
[  13.408987] r8169: eth0: link down
[  13.409223] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  13.409442] type=1505 audit(1282336206.447:11):  operation="profile_load" pid=822 name="/usr/bin/evince-thumbnailer"
[  13.520552] hda_codec: ALC888: BIOS auto-probing.
[  13.624069] usb 1-4: reset high speed USB device using ehci_hcd and address 2
[  13.764149] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.0/input/input5
[  13.905336] phy0: Selected rate control algorithm 'minstrel'
[  13.906184] zd1211rw 1-4:1.0: phy0
[  13.906232] usbcore: registered new interface driver zd1211rw
[  13.920159] usb 1-4: firmware: requesting zd1211/zd1211b_ub
[  13.971658] ppdev: user-space parallel port driver
[  14.074913] usb 1-4: firmware: requesting zd1211/zd1211b_uphr
[  14.121833] zd1211rw 1-4:1.0: firmware version 4725
[  14.165829] zd1211rw 1-4:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--NS
[  14.168950] cfg80211: Calling CRDA for country: DE
[  14.174827] cfg80211: Regulatory domain changed to country: DE
[  14.174831] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  14.174834] (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  14.174836] (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  14.174839] (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[  14.194050] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  14.411574] [drm] nouveau 0000:00:10.0: Allocating FIFO number 1
[  14.411870] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FIFO 1
[  14.539047] CPU0 attaching NULL sched-domain.
[  14.539053] CPU1 attaching NULL sched-domain.
[  14.556624] CPU0 attaching sched-domain:
[  14.556630]  domain 0: span 0-1 level MC
[  14.556635]  groups: 0 1
[  14.556647] CPU1 attaching sched-domain:
[  14.556649]  domain 0: span 0-1 level MC
[  14.556651]  groups: 1 0
[  16.323418] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  16.323424] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[  16.323429] sr 1:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[  16.323436] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 02 00
[  16.323448] end_request: I/O error, dev sr0, sector 4096
[  16.354714] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  16.354721] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[  16.354726] sr 1:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[  16.354734] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 02 00
[  16.354746] end_request: I/O error, dev sr0, sector 4096
[  16.515076] CPU0 attaching NULL sched-domain.
[  16.515084] CPU1 attaching NULL sched-domain.
[  16.536618] CPU0 attaching sched-domain:
[  16.536622]  domain 0: span 0-1 level MC
[  16.536625]  groups: 0 1
[  16.536633] CPU1 attaching sched-domain:
[  16.536635]  domain 0: span 0-1 level MC
[  16.536637]  groups: 1 0
[  18.114817] usb 1-5: USB disconnect, address 3
[  18.263974] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  18.263980] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[  18.263985] sr 1:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[  18.263992] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 02 00 00 00 02 00
[  18.264015] end_request: I/O error, dev sr0, sector 2048
[  18.264020] __ratelimit: 13 callbacks suppressed
[  18.264024] Buffer I/O error on device sr0, logical block 512
[  18.264028] Buffer I/O error on device sr0, logical block 513
[  18.296296] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  18.296302] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[  18.296306] sr 1:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[  18.296314] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 02 00 00 00 02 00
[  18.296324] end_request: I/O error, dev sr0, sector 2048
[  18.296329] Buffer I/O error on device sr0, logical block 512
[  18.296333] Buffer I/O error on device sr0, logical block 513
[  18.603255] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  18.603262] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[  18.603266] sr 1:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[  18.603274] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 02 00
[  18.603285] end_request: I/O error, dev sr0, sector 4096
[  18.603290] Buffer I/O error on device sr0, logical block 1024
[  18.603294] Buffer I/O error on device sr0, logical block 1025
[  18.635666] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  18.635673] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[  18.635678] sr 1:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
[  18.635684] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 02 00
[  18.635696] end_request: I/O error, dev sr0, sector 4096
[  18.635701] Buffer I/O error on device sr0, logical block 1024
[  18.635706] Buffer I/O error on device sr0, logical block 1025
[  18.636908] UDF-fs: Partition marked readonly; forcing readonly mount
[  18.671341] UDF-fs INFO UDF: Mounting volume 'ES_102944', timestamp 2001/04/02 19:09 (1078)
[  23.328031] usb 1-5: new high speed USB device using ehci_hcd and address 5
[  23.474372] usb 1-5: configuration #1 chosen from 1 choice
[  23.476343] scsi8 : SCSI emulation for USB Mass Storage devices
[  23.476629] usb-storage: device found at 5
[  23.476632] usb-storage: waiting for device to settle before scanning
[  23.490523] usbcore: registered new interface driver usbserial
[  23.490781] USB Serial support registered for generic
[  23.490918] usbcore: registered new interface driver usbserial_generic
[  23.490921] usbserial: USB Serial Driver core
[  23.493115] USB Serial support registered for GSM modem (1-port)
[  23.493564] option 1-5:1.0: GSM modem (1-port) converter detected
[  23.493877] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
[  23.493907] option 1-5:1.1: GSM modem (1-port) converter detected
[  23.494077] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
[  23.494106] option 1-5:1.3: GSM modem (1-port) converter detected
[  23.494279] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
[  23.494304] usbcore: registered new interface driver option
[  23.494306] option: v0.7.2:USB Driver for GSM modems
[  24.804047] wlan0: Creating new IBSS network, BSSID ca:19:c5:7f:b0:c4
[  25.886017] ip_tables: (C) 2000-2006 Netfilter Core Team
[  25.930066] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  25.931364] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[  25.931369] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[  25.931371] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[  27.168050] wlan0: no IPv6 routers present
[  28.477893] usb-storage: device scan complete
[  28.480009] scsi 8:0:0:0: Direct-Access    ONDA    MMC Storage      2.31 PQ: 0 ANSI: 2
[  28.480794] sd 8:0:0:0: Attached scsi generic sg2 type 0
[  28.491627] sd 8:0:0:0: [sdf] Attached SCSI removable disk
[  57.972564] hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
[  57.972573] usb 1-5: USB disconnect, address 5
[  57.976223] option: option_instat_callback: error -108
[  57.976487] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  57.976513] option 1-5:1.0: device disconnected
[  57.976669] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  57.976690] option 1-5:1.1: device disconnected
[  57.992733] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  57.992750] option 1-5:1.3: device disconnected
[  58.232023] usb 1-5: new high speed USB device using ehci_hcd and address 6
[  58.436028] usb 1-5: device descriptor read/64, error -71
[  58.744022] usb 1-5: device descriptor read/64, error -71
[  58.960032] usb 1-5: new high speed USB device using ehci_hcd and address 7
[  59.536028] usb 1-5: device not accepting address 7, error -71
[  59.648033] usb 1-5: new high speed USB device using ehci_hcd and address 8
[  60.112031] usb 1-5: device not accepting address 8, error -71
[  60.224032] usb 1-5: new high speed USB device using ehci_hcd and address 9
[  60.261009] usb 1-5: configuration #1 chosen from 1 choice
[  60.262576] option 1-5:1.0: GSM modem (1-port) converter detected
[  60.262663] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
[  60.262731] option 1-5:1.1: GSM modem (1-port) converter detected
[  60.262784] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
[  60.263081] scsi9 : SCSI emulation for USB Mass Storage devices
[  60.263288] option 1-5:1.3: GSM modem (1-port) converter detected
[  60.263369] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
[  60.263503] usb-storage: device found at 9
[  60.263505] usb-storage: waiting for device to settle before scanning
[  60.299139] hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
[  60.299145] usb 1-5: USB disconnect, address 9
[  60.300135] option: option_instat_callback: error -108
[  60.300418] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  60.300443] option 1-5:1.0: device disconnected
[  60.300590] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  60.300609] option 1-5:1.1: device disconnected
[  60.301111] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  60.301127] option 1-5:1.3: device disconnected
[  60.543262] usb 1-5: new high speed USB device using ehci_hcd and address 10
[  60.748051] usb 1-5: device descriptor read/64, error -71
[  61.432031] usb 1-5: device not accepting address 10, error -71
[  61.544045] usb 1-5: new high speed USB device using ehci_hcd and address 11
[  61.690526] usb 1-5: configuration #1 chosen from 1 choice
[  61.691989] option 1-5:1.0: GSM modem (1-port) converter detected
[  61.692092] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
[  61.692167] option 1-5:1.1: GSM modem (1-port) converter detected
[  61.692230] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
[  61.694263] scsi10 : SCSI emulation for USB Mass Storage devices
[  61.708063] option 1-5:1.3: GSM modem (1-port) converter detected
[  61.708193] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
[  61.708302] usb-storage: device found at 11
[  61.708304] usb-storage: waiting for device to settle before scanning
[  61.792680] hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
[  61.792689] usb 1-5: USB disconnect, address 11
[  61.793053] option: option_instat_callback: error -108
[  61.793371] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  61.793386] option 1-5:1.0: device disconnected
[  61.793530] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  61.793543] option 1-5:1.1: device disconnected
[  61.795086] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  61.795103] option 1-5:1.3: device disconnected
[  62.034624] usb 1-5: new high speed USB device using ehci_hcd and address 12
[  62.240035] usb 1-5: device descriptor read/64, error -71
[  62.552030] usb 1-5: device descriptor read/64, error -71
[  62.768032] usb 1-5: new high speed USB device using ehci_hcd and address 13
[  62.914301] usb 1-5: configuration #1 chosen from 1 choice
[  62.915937] option 1-5:1.0: GSM modem (1-port) converter detected
[  62.916125] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
[  62.916246] option 1-5:1.1: GSM modem (1-port) converter detected
[  62.916376] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
[  62.916543] scsi11 : SCSI emulation for USB Mass Storage devices
[  62.916745] option 1-5:1.3: GSM modem (1-port) converter detected
[  62.916832] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
[  62.916965] usb-storage: device found at 13
[  62.916967] usb-storage: waiting for device to settle before scanning
[  63.131074] hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
[  63.131082] usb 1-5: USB disconnect, address 13
[  63.131324] option: option_instat_callback: error -108
[  63.131582] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  63.131598] option 1-5:1.0: device disconnected
[  63.131758] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  63.131774] option 1-5:1.1: device disconnected
[  63.135836] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  63.135852] option 1-5:1.3: device disconnected
[  63.372035] usb 1-5: new high speed USB device using ehci_hcd and address 14
[  63.518224] usb 1-5: configuration #1 chosen from 1 choice
[  63.519824] option 1-5:1.0: GSM modem (1-port) converter detected
[  63.519910] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
[  63.519978] option 1-5:1.1: GSM modem (1-port) converter detected
[  63.520055] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
[  63.520360] scsi12 : SCSI emulation for USB Mass Storage devices
[  63.520581] option 1-5:1.3: GSM modem (1-port) converter detected
[  63.520668] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
[  63.520792] usb-storage: device found at 14
[  63.520794] usb-storage: waiting for device to settle before scanning
[  63.611007] hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
[  63.611015] usb 1-5: USB disconnect, address 14
[  63.611285] option: option_instat_callback: error -108
[  63.611550] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  63.611564] option 1-5:1.0: device disconnected
[  63.611728] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  63.611743] option 1-5:1.1: device disconnected
[  63.612168] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  63.612182] option 1-5:1.3: device disconnected
[  63.852048] usb 1-5: new high speed USB device using ehci_hcd and address 15
[  64.056043] usb 1-5: device descriptor read/64, error -71
[  64.364052] usb 1-5: device descriptor read/64, error -71
[  64.580039] usb 1-5: new high speed USB device using ehci_hcd and address 16
[  64.729661] usb 1-5: configuration #1 chosen from 1 choice
[  64.731606] option 1-5:1.0: GSM modem (1-port) converter detected
[  64.731691] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
[  64.731760] option 1-5:1.1: GSM modem (1-port) converter detected
[  64.731813] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
[  64.733501] scsi13 : SCSI emulation for USB Mass Storage devices
[  64.733691] option 1-5:1.3: GSM modem (1-port) converter detected
[  64.733805] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
[  64.733870] usb-storage: device found at 16
[  64.733872] usb-storage: waiting for device to settle before scanning
[  65.134069] hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
[  65.134078] usb 1-5: USB disconnect, address 16
[  65.134417] option: option_instat_callback: error -108
[  65.134734] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  65.134750] option 1-5:1.0: device disconnected
[  65.134914] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  65.134929] option 1-5:1.1: device disconnected
[  65.140737] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  65.140754] option 1-5:1.3: device disconnected
[  65.392032] usb 1-5: new high speed USB device using ehci_hcd and address 17
[  65.538721] usb 1-5: configuration #1 chosen from 1 choice
[  65.540793] option 1-5:1.0: GSM modem (1-port) converter detected
[  65.540889] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
[  65.540958] option 1-5:1.1: GSM modem (1-port) converter detected
[  65.541015] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
[  65.541323] scsi14 : SCSI emulation for USB Mass Storage devices
[  65.541559] option 1-5:1.3: GSM modem (1-port) converter detected
[  65.541669] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
[  65.541815] usb-storage: device found at 17
[  65.541817] usb-storage: waiting for device to settle before scanning
[  65.613985] hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
[  65.613994] usb 1-5: USB disconnect, address 17
[  65.614380] option: option_instat_callback: error -108
[  65.614692] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  65.614707] option 1-5:1.0: device disconnected
[  65.614867] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  65.614882] option 1-5:1.1: device disconnected
[  65.615290] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  65.615305] option 1-5:1.3: device disconnected
[  65.852033] usb 1-5: new high speed USB device using ehci_hcd and address 18
[  66.056043] usb 1-5: device descriptor read/64, error -71
[  66.368033] usb 1-5: device descriptor read/64, error -71
[  66.584032] usb 1-5: new high speed USB device using ehci_hcd and address 19
[  66.730002] usb 1-5: configuration #1 chosen from 1 choice
[  66.731754] option 1-5:1.0: GSM modem (1-port) converter detected
[  66.731909] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
[  66.732016] option 1-5:1.1: GSM modem (1-port) converter detected
[  66.732159] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
[  66.732320] scsi15 : SCSI emulation for USB Mass Storage devices
[  66.732542] option 1-5:1.3: GSM modem (1-port) converter detected
[  66.732626] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
[  66.732763] usb-storage: device found at 19
[  66.732765] usb-storage: waiting for device to settle before scanning
[  66.832250] hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
[  66.832259] usb 1-5: USB disconnect, address 19
[  66.832533] option: option_instat_callback: error -108
[  66.832829] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  66.832845] option 1-5:1.0: device disconnected
[  66.833019] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  66.833033] option 1-5:1.1: device disconnected
[  66.838753] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  66.838769] option 1-5:1.3: device disconnected
[  67.076065] usb 1-5: new high speed USB device using ehci_hcd and address 20
[  67.221963] usb 1-5: configuration #1 chosen from 1 choice
[  67.223913] option 1-5:1.0: GSM modem (1-port) converter detected
[  67.223999] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
[  67.224504] option 1-5:1.1: GSM modem (1-port) converter detected
[  67.224585] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
[  67.224853] scsi16 : SCSI emulation for USB Mass Storage devices
[  67.225081] option 1-5:1.3: GSM modem (1-port) converter detected
[  67.225172] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
[  67.225304] usb-storage: device found at 20
[  67.225306] usb-storage: waiting for device to settle before scanning
[  72.225480] usb-storage: device scan complete
[  72.227453] scsi 16:0:0:0: Direct-Access    ONDA    MMC Storage      2.31 PQ: 0 ANSI: 2
[  72.229790] sd 16:0:0:0: Attached scsi generic sg2 type 0
[  72.237729] sd 16:0:0:0: [sdf] Attached SCSI removable disk
[  97.734109] PPP BSD Compression module registered
[  97.737952] PPP Deflate Compression module registered
[  355.000022] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  415.000026] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  475.000029] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)