problema masterizzare cd audio

Riconoscimento, installazione e configurazione delle periferiche.
Avatar utente
I.g.n.a.z.i.o.
Scoppiettante Seguace
Scoppiettante Seguace
Messaggi: 273
Iscrizione: martedì 16 febbraio 2010, 17:29

problema masterizzare cd audio

Messaggio da I.g.n.a.z.i.o. »

ciao ho un grosso problema non posto masterizzare un cd audio con k3b vi mostro un output di debug
Devices
-----------------------
HL-DT-ST DVDRAM GSA-T20N WP03 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio strato, DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata, Livello Jump] [%7]

System
-----------------------
K3b Version: 2.0.1
KDE Version: 4.4.2 (KDE 4.4.2)
QT Version:  4.6.2
Kernel:      2.6.32-25-generic

Used versions
-----------------------
cdrecord: 1.1.10

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities  :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-T20N '
Revision      : 'WP03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc  CD-R/CD-RW driver (mmc_cdr).
Driver flags  : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13524 kB/s 76x CD 9x DVD
FIFO size      : 12582912 = 12288 KB
Speed set to 4234 KB/s
pregap1: -1
Track 01: audio  36 MB (03:35.38) no preemp swab copy
Track 02: audio  38 MB (03:49.05) no preemp swab copy
Track 03: audio  36 MB (03:39.30) no preemp swab copy
Track 04: audio  30 MB (03:00.56) no preemp swab copy
Track 05: audio  31 MB (03:08.81) no preemp swab copy
Track 06: audio  32 MB (03:15.61) no preemp swab copy
Track 07: audio  35 MB (03:28.52) no preemp swab copy
Track 08: audio  39 MB (03:54.89) no preemp swab copy
Track 09: audio  53 MB (05:19.98) no preemp swab copy
Track 10: audio  45 MB (04:29.80) no preemp swab copy
Total size:      383 MB (37:59.93) = 170995 sectors
Lout start:      383 MB (38:01/70) = 170995 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 188851
Starting to write CD/DVD at speed  24.0 in real TAO mode for single session.
Last chance to quit, starting real write in    2 seconds.
  1 seconds.
  0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:    0 of  36 MB written.
Track 01:    1 of  36 MB written (fifo 100%) [buf  99%]  0.5x.
Track 01:    2 of  36 MB written (fifo 100%) [buf 100%]  10.5x.
Track 01:    3 of  36 MB written (fifo 100%) [buf  99%]  10.7x.
Track 01:    4 of  36 MB written (fifo 100%) [buf  99%]  10.4x.
Track 01:    5 of  36 MB written (fifo 100%) [buf  99%]  10.8x.
Track 01:    6 of  36 MB written (fifo 100%) [buf  99%]  10.4x.
Track 01:    7 of  36 MB written (fifo 100%) [buf  99%]  10.8x.
Track 01:    8 of  36 MB written (fifo 100%) [buf  99%]  10.4x.
Track 01:    9 of  36 MB written (fifo 100%) [buf 100%]  10.8x.
Track 01:  10 of  36 MB written (fifo 100%) [buf  99%]  10.4x.
Track 01:  11 of  36 MB written (fifo 100%) [buf  99%]  10.6x.
Track 01:  12 of  36 MB written (fifo 100%) [buf 100%]  10.5x.
Track 01:  13 of  36 MB written (fifo 100%) [buf  99%]  10.6x.
Track 01:  14 of  36 MB written (fifo 100%) [buf  99%]  10.3x.
Track 01:  15 of  36 MB written (fifo 100%) [buf  99%]  10.7x.
Track 01:  16 of  36 MB written (fifo 100%) [buf  99%]  10.3x.
Track 01:  17 of  36 MB written (fifo 100%) [buf  99%]  10.7x.
Track 01:  18 of  36 MB written (fifo 100%) [buf  99%]  10.3x.
Track 01:  19 of  36 MB written (fifo 100%) [buf 100%]  10.7x.
Track 01:  20 of  36 MB written (fifo 100%) [buf  99%]  10.3x.
Track 01:  21 of  36 MB written (fifo 100%) [buf  99%]  3.0x.
Track 01:  22 of  36 MB written (fifo 100%) [buf 100%]  10.4x.
Track 01:  23 of  36 MB written (fifo 100%) [buf  99%]  10.5x.
Track 01:  24 of  36 MB written (fifo 100%) [buf  99%]  10.3x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 2A 81 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 34 14 04 80 09 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x03 (spindle servo failure) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.007s timeout 40s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 25592112 bytes
Writing  time:  32.332s
Average write speed  70.6x.
Min drive buffer fill was 99%
Fixating...
Fixating time:    0.003s
/usr/bin/wodim: fifo had 595 puts and 404 gets.
/usr/bin/wodim: fifo was 0 times empty and 388 times full, min fill was 93%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=24 -tao driveropts=burnfree -useinfo -audio /tmp/kde-ignazio/k3b_audio_0_01.inf /tmp/kde-ignazio/k3b_audio_0_02.inf /tmp/kde-ignazio/k3b_audio_0_03.inf /tmp/kde-ignazio/k3b_audio_0_04.inf /tmp/kde-ignazio/k3b_audio_0_05.inf /tmp/kde-ignazio/k3b_audio_0_06.inf /tmp/kde-ignazio/k3b_audio_0_07.inf /tmp/kde-ignazio/k3b_audio_0_08.inf /tmp/kde-ignazio/k3b_audio_0_09.inf /tmp/kde-ignazio/k3b_audio_0_10.inf


no capisco quale sia l'errore qualcuno mi potrebbe aiutare  >:( >:( >:(
Avatar utente
Alka-Seltzer PLUS
Rampante Reduce
Rampante Reduce
Messaggi: 8887
Iscrizione: venerdì 18 settembre 2009, 13:29
Desktop: Unity + Gnome flashback
Distribuzione: Ubuntu 16.04 & 14.04 64bit

Re: problema masterizzare cd audio

Messaggio da Alka-Seltzer PLUS »

Certo che dopo 100+ messaggi postare l' output così ...  >:(

Punto 5 del seguente link:

http://forum.ubuntu-it.org/viewtopic.php?t=325822


Qui dicono che si tratti di fatalità ( stesso tuo errore ):

http://forum.ubuntu-it.org/viewtopic.php?t=379119

Qui di masterizzatore ( penultimo post ):

http://forum.ubuntu-it.org/viewtopic.php?t=209152msg1434775

Qui di bug ( post #8 con soluzione al problema ):

https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/149076

Ce n' è per tutti ;D
| MB: ASUS M3A78 PRO | CPU: AMD Phenom II X4 940 BE | RAM: G-SKILL 8GB 800 MHz | VGA: Sapphire ATI HD 5770 | HD: SSD SAMSUNG 850 EVO + WDC WD10EACS-00DS | Optical drive: NEC SATA AD-7201 Lightscribe | Monitor: ASUS MK221H 22' | Speakers: Majestic HTS 221 | Case: Coolermaster ELITE 335 | Power supply: EVGA SuperNova 550 GS V2 | OS: Ubuntu 16.04 64 bit + Ubuntu Linux 14.04 64bit |
Scrivi risposta

Ritorna a “Driver e periferiche”

Chi c’è in linea

Visualizzano questa sezione: Google [Bot] e 8 ospiti