[Audio] Audio non funzionante con 5.1
Inviato: domenica 12 settembre 2010, 23:17
Ciao avevo cambiato scheda madre al mio vecchio pc e fin'ora non mi era mai preoccupato di ristabilire l'impianto 5.1, tenendomi solo un 2.1 che comunque funzionava egregiamente. Ieri ho provato, sono andato in preferenze audio ed ho selezionato la voce "analog surround 5.1 output", poi con
ho impostato alsamixer così come in screenshot


da notare che il volume di "master m" si disattiva sempre nonostante l'ho più volte riattivato
ho provato a fare un test
il test è questo, ma non si sente nulla... altra cosa che ho modificato è il file:
nelle righe
default-sample-rate = 48000
default-sample-channels = 6
che prima erano:
; default-sample-rate = 41800
; default-sample-channels = 2
Se serve altro vi prego di farmi sapere, grazie!
Riporto di seguito lspci, aplay -l, cat /proc/asound/card*/codec* | grep -i codec, dmesg | grep -i hda, ps aux | grep pulse:
Posto anche uno screenshot di preferenze audio
Codice: Seleziona tutto
alsamixer -Dhwho impostato alsamixer così come in screenshot


da notare che il volume di "master m" si disattiva sempre nonostante l'ho più volte riattivato
ho provato a fare un test
Codice: Seleziona tutto
speaker-test -Dplug:surround51 -c6 -l1 -twav
speaker-test 1.0.22
La periferica di riproduzione è plug:surround51
I parametri dello stream sono 48000Hz, S16_LE, 6 canali
File WAV
Frequenza impostata a 48000Hz (richiesti 48000Hz)
La dimensione del buffer va da 6 a 5461
La durata del periodo va da 3 a 2730
Usare la dimensione massima di buffer 5460
Fasi = 4
period_size impostato a 1365
buffer_size impostato a 5460
0 - Frontale sinistro
4 - Centrale
1 - Frontale destro
3 - Posteriore destro
2 - Posteriore sinistro
5 - LFE
Durata per periodo = 8,533782
Codice: Seleziona tutto
cat /etc/pulse/daemon.conf
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values a commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file =
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
flat-volumes = no
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000
; default-sample-format = s16le
default-sample-rate = 48000
default-sample-channels = 6
; default-channel-map = front-left,front-right
default-fragments = 8
default-fragment-size-msec = 10
default-sample-rate = 48000
default-sample-channels = 6
che prima erano:
; default-sample-rate = 41800
; default-sample-channels = 2
Se serve altro vi prego di farmi sapere, grazie!
Riporto di seguito lspci, aplay -l, cat /proc/asound/card*/codec* | grep -i codec, dmesg | grep -i hda, ps aux | grep pulse:
Codice: Seleziona tutto
lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: ATI Technologies Inc RV635 PRO AGP [Radeon HD 3650]
ciccoale@ciccobuntu:~$ aplay -l
**** Lista di PLAYBACK dispositivi hardware ****
scheda 0: V8235 [VIA 8235], dispositivo 0: VIA 8235 [VIA 8235]
Sottoperiferiche: 4/4
Sottoperiferica #0: subdevice #0
Sottoperiferica #1: subdevice #1
Sottoperiferica #2: subdevice #2
Sottoperiferica #3: subdevice #3
scheda 0: V8235 [VIA 8235], dispositivo 1: VIA 8235 [VIA 8235]
Sottoperiferiche: 0/1
Sottoperiferica #0: subdevice #0
ciccoale@ciccobuntu:~$ cat /proc/asound/card*/codec* | grep -i codec
cat: /proc/asound/card0/codec97#0: È una directory
ciccoale@ciccobuntu:~$ dmesg | grep -i hda
ciccoale@ciccobuntu:~$ ps aux | grep pulse
ciccoale 1400 0.0 0.2 86312 4788 ? S<sl 16:38 0:00 /usr/bin/pulseaudio --start --log-target=syslog
ciccoale 1410 0.0 0.1 10736 2952 ? S 16:38 0:00 /usr/lib/pulseaudio/pulse/gconf-helper
ciccoale 3211 0.0 0.0 3340 868 pts/0 S+ 17:55 0:00 grep --color=auto pulse