Webcam microdia
Inviato: domenica 26 settembre 2010, 11:30
ciao a tutti, ho comprato una webcam parecchi anni fa e con mio sommo dispiacere ho scoperto che su ubuntu 8.04 non funzionava, essendo alle prime armi non l'avevo più presa in considerazione e ho lasciato perdere.
ora ho installato la 10.04 e volevo provare a farla funzionare.
premetto che sulla 8.04 si accendevano i led ma non me la riconosceva, ora sulla 10.04 non si accendono nemmeno i led.
digitanto lsusb il risultato è questo
ho seguito la guida http://wiki.ubuntu-it.org/Hardware/Webcam/Microdia, ma al momento di digitare dmesg il risultato è completamente diverso dalle 4 righe riportate nella guida ed è il seguente:
vorrei capire cosa ho sbagliato, perchè mi è sembrato di aver fatto tutti i passi giusti ed arrivato a questo punto non so più che pesci pigliare.
è meglio che mi compri una webcam nuova?
ora ho installato la 10.04 e volevo provare a farla funzionare.
premetto che sulla 8.04 si accendevano i led ma non me la riconosceva, ora sulla 10.04 non si accendono nemmeno i led.
digitanto lsusb il risultato è questo
Codice: Seleziona tutto
Bus 005 Device 002: ID 0c45:613a Microdia PC Camera (SN9C120)Codice: Seleziona tutto
[ 0.517437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.517513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.517587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.517691] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 4.316351] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 4.316450] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[ 4.316546] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 4.316642] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
[ 4.316737] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
[ 4.316833] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11)
[ 4.316928] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
[ 4.317023] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
[ 4.317122] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 4.317131] vgaarb: loaded
[ 4.317246] SCSI subsystem initialized
[ 4.317298] libata version 3.00 loaded.
[ 4.317362] usbcore: registered new interface driver usbfs
[ 4.317375] usbcore: registered new interface driver hub
[ 4.317396] usbcore: registered new device driver usb
[ 4.317548] ACPI: WMI: Mapper loaded
[ 4.317550] PCI: Using ACPI for IRQ routing
[ 4.318186] NetLabel: Initializing
[ 4.318187] NetLabel: domain hash size = 128
[ 4.318189] NetLabel: protocols = UNLABELED CIPSOv4
[ 4.318200] NetLabel: unlabeled traffic allowed by default
[ 4.318235] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 4.318239] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 4.324026] Switching to clocksource tsc
[ 4.325813] AppArmor: AppArmor Filesystem Enabled
[ 4.325829] pnp: PnP ACPI init
[ 4.325846] ACPI: bus type pnp registered
[ 4.528043] pnp: PnP ACPI: found 11 devices
[ 4.528045] ACPI: ACPI bus type pnp unregistered
[ 4.528050] PnPBIOS: Disabled by ACPI PNP
[ 4.528062] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 4.528065] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 4.528067] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 4.528070] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 4.528072] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 4.528075] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 4.528078] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 4.528084] system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
[ 4.528091] system 00:08: ioport range 0x800-0x80f has been reserved
[ 4.528094] system 00:08: ioport range 0x1000-0x107f has been reserved
[ 4.528096] system 00:08: ioport range 0x1180-0x11bf has been reserved
[ 4.528099] system 00:08: ioport range 0xfe00-0xfe00 has been reserved
[ 4.528102] system 00:08: iomem range 0xff800000-0xff800fff has been reserved
[ 4.562829] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 4.562833] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 4.562840] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
[ 4.562846] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 4.562855] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 4.562858] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 4.562865] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff
[ 4.562870] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[ 4.562879] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 4.562882] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 4.562889] pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff
[ 4.562894] pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff
[ 4.562905] pci 0000:0f:06.0: CardBus bridge, secondary bus 0000:10
[ 4.562907] pci 0000:0f:06.0: IO window: 0x005000-0x0050ff
[ 4.562912] pci 0000:0f:06.0: IO window: 0x005400-0x0054ff
[ 4.562918] pci 0000:0f:06.0: PREFETCH window: 0x80000000-0x83ffffff
[ 4.562924] pci 0000:0f:06.0: MEM window: 0x88000000-0x8bffffff
[ 4.562931] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0f
[ 4.562934] pci 0000:00:1e.0: IO window: 0x5000-0x5fff
[ 4.562941] pci 0000:00:1e.0: MEM window: 0xfc200000-0xfc2fffff
[ 4.562946] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
[ 4.562965] alloc irq_desc for 16 on node -1
[ 4.562967] alloc kstat_irqs on node -1
[ 4.562972] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.562979] pci 0000:00:1c.0: setting latency timer to 64
[ 4.562989] alloc irq_desc for 17 on node -1
[ 4.562990] alloc kstat_irqs on node -1
[ 4.562993] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.562999] pci 0000:00:1c.1: setting latency timer to 64
[ 4.563009] alloc irq_desc for 18 on node -1
[ 4.563011] alloc kstat_irqs on node -1
[ 4.563014] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.563020] pci 0000:00:1c.2: setting latency timer to 64
[ 4.563028] pci 0000:00:1e.0: setting latency timer to 64
[ 4.563041] alloc irq_desc for 22 on node -1
[ 4.563042] alloc kstat_irqs on node -1
[ 4.563046] pci 0000:0f:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.563053] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 4.563056] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 4.563058] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 4.563061] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
[ 4.563063] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[ 4.563065] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
[ 4.563068] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
[ 4.563070] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
[ 4.563072] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
[ 4.563075] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
[ 4.563077] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
[ 4.563079] pci_bus 0000:0f: resource 0 io: [0x5000-0x5fff]
[ 4.563081] pci_bus 0000:0f: resource 1 mem: [0xfc200000-0xfc2fffff]
[ 4.563084] pci_bus 0000:0f: resource 2 pref mem [0x80000000-0x83ffffff]
[ 4.563086] pci_bus 0000:0f: resource 3 io: [0x00-0xffff]
[ 4.563088] pci_bus 0000:0f: resource 4 mem: [0x000000-0xffffffff]
[ 4.563091] pci_bus 0000:10: resource 0 io: [0x5000-0x50ff]
[ 4.563093] pci_bus 0000:10: resource 1 io: [0x5400-0x54ff]
[ 4.563095] pci_bus 0000:10: resource 2 pref mem [0x80000000-0x83ffffff]
[ 4.563097] pci_bus 0000:10: resource 3 mem: [0x88000000-0x8bffffff]
[ 4.563130] NET: Registered protocol family 2
[ 4.563211] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 4.563499] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 4.564050] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 4.564405] TCP: Hash tables configured (established 131072 bind 65536)
[ 4.564408] TCP reno registered
[ 4.564530] NET: Registered protocol family 1
[ 4.564554] pci 0000:00:02.0: Boot video device
[ 4.564801] Simple Boot Flag at 0x36 set to 0x1
[ 4.564927] cpufreq-nforce2: No nForce2 chipset.
[ 4.564954] Scanning for low memory corruption every 60 seconds
[ 4.565047] audit: initializing netlink socket (disabled)
[ 4.565061] type=2000 audit(1285486437.564:1): initialized
[ 4.574391] Trying to unpack rootfs image as initramfs...
[ 4.584362] highmem bounce pool size: 64 pages
[ 4.584368] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 4.589423] VFS: Disk quotas dquot_6.5.2
[ 4.589477] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.589984] fuse init (API version 7.13)
[ 4.590061] msgmni has been set to 1690
[ 4.596358] alg: No test for stdrng (krng)
[ 4.596443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.596446] io scheduler noop registered
[ 4.596448] io scheduler anticipatory registered
[ 4.596449] io scheduler deadline registered
[ 4.596486] io scheduler cfq registered (default)
[ 4.596657] alloc irq_desc for 24 on node -1
[ 4.596659] alloc kstat_irqs on node -1
[ 4.596673] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 4.596685] pcieport 0000:00:1c.0: setting latency timer to 64
[ 4.596851] alloc irq_desc for 25 on node -1
[ 4.596853] alloc kstat_irqs on node -1
[ 4.596862] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 4.596873] pcieport 0000:00:1c.1: setting latency timer to 64
[ 4.597029] alloc irq_desc for 26 on node -1
[ 4.597031] alloc kstat_irqs on node -1
[ 4.597039] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 4.597051] pcieport 0000:00:1c.2: setting latency timer to 64
[ 4.597151] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.597245] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.598120] ACPI: AC Adapter [ADP1] (on-line)
[ 4.598183] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 4.599779] ACPI: Lid Switch [LID0]
[ 4.599833] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 4.599840] ACPI: Sleep Button [SLPB]
[ 4.599890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.599892] ACPI: Power Button [PWRF]
[ 4.600132] ACPI: Extensa 5220 detected - disabling mwait for CPU C-states
[ 4.601009] Marking TSC unstable due to TSC halts in idle
[ 4.601083] processor LNXCPU:00: registered as cooling_device0
[ 4.608251] Switching to clocksource hpet
[ 4.765926] Freeing initrd memory: 7781k freed
[ 4.819549] thermal LNXTHERM:01: registered as thermal_zone0
[ 4.819558] ACPI: Thermal Zone [TZS0] (25 C)
[ 4.824343] thermal LNXTHERM:02: registered as thermal_zone1
[ 4.824349] ACPI: Thermal Zone [TZS1] (29 C)
[ 4.825760] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.826986] brd: module loaded
[ 4.827375] loop: module loaded
[ 4.827459] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 4.827555] ata_piix 0000:00:1f.1: version 2.13
[ 4.827570] alloc irq_desc for 19 on node -1
[ 4.827572] alloc kstat_irqs on node -1
[ 4.827580] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.827624] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.827769] isapnp: Scanning for PnP cards...
[ 4.833325] scsi0 : ata_piix
[ 4.833399] scsi1 : ata_piix
[ 4.834021] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 4.834024] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 4.834064] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.834070] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.834327] ACPI: Battery Slot [BAT0] (battery absent)
[ 5.008924] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 5.020698] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JP01, max UDMA/33
[ 5.020884] scsi2 : ata_piix
[ 5.020938] scsi3 : ata_piix
[ 5.022022] ata3: SATA max UDMA/133 cmd 0x1c00 ctl 0x18f4 bmdma 0x18e0 irq 19
[ 5.022029] ata4: SATA max UDMA/133 cmd 0x18f8 ctl 0x18f0 bmdma 0x18e8 irq 19
[ 5.022346] Fixed MDIO Bus: probed
[ 5.022377] PPP generic driver version 2.4.2
[ 5.022430] tun: Universal TUN/TAP device driver, 1.6
[ 5.022431] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 5.022505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.022526] alloc irq_desc for 20 on node -1
[ 5.022528] alloc kstat_irqs on node -1
[ 5.022533] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 5.022552] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.022556] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.022584] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.022619] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.026494] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 5.026572] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504000
[ 5.074518] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.074594] usb usb1: configuration #1 chosen from 1 choice
[ 5.074618] hub 1-0:1.0: USB hub found
[ 5.074625] hub 1-0:1.0: 4 ports detected
[ 5.074676] alloc irq_desc for 23 on node -1
[ 5.074677] alloc kstat_irqs on node -1
[ 5.074682] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.074693] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.074697] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.074725] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.074753] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.078647] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.078660] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504400
[ 5.082597] ata1.00: configured for UDMA/33
[ 5.126316] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.126392] usb usb2: configuration #1 chosen from 1 choice
[ 5.126414] hub 2-0:1.0: USB hub found
[ 5.126421] hub 2-0:1.0: 6 ports detected
[ 5.126471] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.126485] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.126514] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.126521] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.126524] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.126554] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.126583] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
[ 5.126661] usb usb3: configuration #1 chosen from 1 choice
[ 5.126682] hub 3-0:1.0: USB hub found
[ 5.126688] hub 3-0:1.0: 2 ports detected
[ 5.126734] alloc irq_desc for 21 on node -1
[ 5.126735] alloc kstat_irqs on node -1
[ 5.126740] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5.126746] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.126750] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.126776] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 5.126813] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 5.126894] usb usb4: configuration #1 chosen from 1 choice
[ 5.126919] hub 4-0:1.0: USB hub found
[ 5.126926] hub 4-0:1.0: 2 ports detected
[ 5.126969] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.126975] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.126979] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.127004] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 5.127033] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 5.127109] usb usb5: configuration #1 chosen from 1 choice
[ 5.127133] hub 5-0:1.0: USB hub found
[ 5.127140] hub 5-0:1.0: 2 ports detected
[ 5.127179] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.127185] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.127189] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.127215] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 5.127251] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
[ 5.127327] usb usb6: configuration #1 chosen from 1 choice
[ 5.127351] hub 6-0:1.0: USB hub found
[ 5.127357] hub 6-0:1.0: 2 ports detected
[ 5.127396] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.127402] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.127406] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.127433] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 5.127468] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 5.127546] usb usb7: configuration #1 chosen from 1 choice
[ 5.127568] hub 7-0:1.0: USB hub found
[ 5.127573] hub 7-0:1.0: 2 ports detected
[ 5.127663] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 5.138702] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 5.144917] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.144924] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 5.144951] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 5.144969] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 5.144987] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 5.145084] mice: PS/2 mouse device common for all mice
[ 5.145376] rtc_cmos 00:09: RTC can wake from S4
[ 5.145410] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 5.145442] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 5.145535] device-mapper: uevent: version 1.0.3
[ 5.145628] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 5.145677] device-mapper: multipath: version 1.1.0 loaded
[ 5.145679] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.145772] EISA: Probing bus 0 at eisa.0
[ 5.145778] Cannot allocate resource for EISA slot 1
[ 5.145781] Cannot allocate resource for EISA slot 2
[ 5.145782] Cannot allocate resource for EISA slot 3
[ 5.145784] Cannot allocate resource for EISA slot 4
[ 5.145786] Cannot allocate resource for EISA slot 5
[ 5.145800] EISA: Detected 0 cards.
[ 5.145868] cpuidle: using governor ladder
[ 5.145920] cpuidle: using governor menu
[ 5.146264] TCP cubic registered
[ 5.146391] NET: Registered protocol family 10
[ 5.146739] lo: Disabled Privacy Extensions
[ 5.146979] NET: Registered protocol family 17
[ 5.147022] Using IPI No-Shortcut mode
[ 5.147090] PM: Resume from disk failed.
[ 5.147101] registered taskstats version 1
[ 5.147898] Magic number: 10:741:572
[ 5.147992] rtc_cmos 00:09: setting system clock to 2010-09-26 07:33:59 UTC (1285486439)
[ 5.147994] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.147996] EDD information not available.
[ 5.235243] isapnp: No Plug & Play device found
[ 5.238979] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T40N JP01 PQ: 0 ANSI: 5
[ 5.245914] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 5.250295] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.250298] Uniform CD-ROM driver Revision: 3.20
[ 5.250382] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 5.250428] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 5.672031] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 5.840359] usb 6-1: configuration #1 chosen from 1 choice
[ 5.860116] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.860134] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 5.868577] ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC31P, max UDMA/133
[ 5.868580] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 5.884601] ata3.00: configured for UDMA/133
[ 5.884689] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCO PQ: 0 ANSI: 5
[ 5.884796] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.884862] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 5.884902] sd 2:0:0:0: [sda] Write Protect is off
[ 5.884905] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.884926] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.885040] sda: sda1 sda2 < sda5 > sda3
[ 5.925479] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.412052] ata4.01: failed to resume link (SControl 0)
[ 6.423248] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 6.423269] ata4.01: SATA link down (SStatus 0 SControl 0)
[ 6.423307] Freeing unused kernel memory: 660k freed
[ 6.423628] Write protecting the kernel text: 4680k
[ 6.423651] Write protecting the kernel read-only data: 1844k
[ 6.441086] udev: starting version 151
[ 6.700340] tg3.c:v3.102 (September 1, 2009)
[ 6.700394] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.700405] tg3 0000:02:00.0: setting latency timer to 64
[ 6.723992] eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1d:72:2e:b2:38
[ 6.723995] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 6.723998] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 6.724015] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 6.727069] ohci1394 0000:0f:06.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.727665] usbcore: registered new interface driver hiddev
[ 6.742599] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input5
[ 6.742775] generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 6.742801] usbcore: registered new interface driver usbhid
[ 6.742895] usbhid: v2.6:USB HID core driver
[ 6.780084] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.977672] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 8.052142] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001d72ffff2eb238]
[ 13.985549] Adding 3905528k swap on /dev/sda1. Priority:-1 extents:1 across:3905528k
[ 14.023236] udev: starting version 151
[ 14.141635] lp: driver loaded but no devices found
[ 14.425048] Linux agpgart interface v0.103
[ 14.428815] lib80211: common routines for IEEE802.11 drivers
[ 14.428818] lib80211_crypt: registered algorithm 'NULL'
[ 14.432838] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 14.433260] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 14.481767] wl: module license 'MIXED/Proprietary' taints kernel.
[ 14.481772] Disabling lock debugging due to kernel taint
[ 14.556117] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 14.581413] wl 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.581427] wl 0000:04:00.0: setting latency timer to 64
[ 14.662307] irda_init()
[ 14.662322] NET: Registered protocol family 23
[ 14.672660] type=1505 audit(1285486449.024:2): operation="profile_load" pid=613 name="/sbin/dhclient3"
[ 14.673308] type=1505 audit(1285486449.024:3): operation="profile_load" pid=613 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.673656] type=1505 audit(1285486449.024:4): operation="profile_load" pid=613 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.710064] sdhci: Secure Digital Host Controller Interface driver
[ 14.710067] sdhci: Copyright(c) Pierre Ossman
[ 14.711347] sdhci-pci 0000:0f:06.3: SDHCI controller found [104c:803c] (rev 0)
[ 14.711366] sdhci-pci 0000:0f:06.3: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.711423] Registered led device: mmc0::
[ 14.711457] mmc0: SDHCI controller on PCI [0000:0f:06.3] using PIO
[ 14.717809] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 14.720492] yenta_cardbus 0000:0f:06.0: CardBus bridge found [1025:011f]
[ 14.720515] yenta_cardbus 0000:0f:06.0: Using CSCINT to route CSC interrupts to PCI
[ 14.720518] yenta_cardbus 0000:0f:06.0: Routing CardBus interrupts to PCI
[ 14.720524] yenta_cardbus 0000:0f:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
[ 14.720939] [drm] Initialized drm 1.1.0 20060810
[ 14.732829] acer-wmi: Brightness must be controlled by generic video driver
[ 14.748087] nsc-ircc 00:0a: activated
[ 14.748094] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.
[ 14.748148] nsc-ircc, chip->init
[ 14.748162] nsc-ircc, Found chip at base=0x02e
[ 14.748204] nsc-ircc, driver loaded (Dag Brattli)
[ 14.748769] IrDA: Registered device irda0
[ 14.748833] nsc-ircc, Found dongle: Supports SIR Mode only
[ 14.748886] nsc-ircc, chip->init
[ 14.748900] nsc-ircc, Found chip at base=0x02e
[ 14.748942] nsc-ircc, driver loaded (Dag Brattli)
[ 14.748946] nsc_ircc_open(), can't get iobase of 0x2f8
[ 14.763875] lib80211_crypt: registered algorithm 'TKIP'
[ 14.764208] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36
[ 14.832432] Initializing USB Mass Storage driver...
[ 14.832822] usbcore: registered new interface driver usb-storage
[ 14.833077] USB Mass Storage support registered.
[ 14.878941] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.878947] i915 0000:00:02.0: setting latency timer to 64
[ 14.898220] alloc irq_desc for 27 on node -1
[ 14.898224] alloc kstat_irqs on node -1
[ 14.898234] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 14.898242] [drm] set up 7M of stolen space
[ 15.023378] yenta_cardbus 0000:0f:06.0: ISA IRQ mask 0x0cf0, PCI irq 22
[ 15.023384] yenta_cardbus 0000:0f:06.0: Socket status: 30000006
[ 15.023387] pci_bus 0000:0f: Raising subordinate bus# of parent bus (#0f) from #10 to #13
[ 15.023396] yenta_cardbus 0000:0f:06.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 15.023399] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
[ 15.023586] yenta_cardbus 0000:0f:06.0: pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
[ 15.023588] yenta_cardbus 0000:0f:06.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 15.035177] tifm_7xx1 0000:0f:06.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.105549] [drm] initialized overlay support
[ 15.492456] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 15.494581] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 15.495484] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 15.496404] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 15.497299] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 15.625277] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 15.785015] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04711/0xa04000
[ 15.810538] fb0: inteldrmfb frame buffer device
[ 15.810541] registered panic notifier
[ 15.849275] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
[ 15.981555] acpi device:03: registered as cooling_device1
[ 15.981784] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 15.981840] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 15.981874] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 15.983569] vga16fb: initializing
[ 15.983572] vga16fb: mapped to 0xc00a0000
[ 15.983575] vga16fb: not registering due to another framebuffer present
[ 15.984269] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 15.984306] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.053417] type=1505 audit(1285486450.404:5): operation="profile_load" pid=781 name="/usr/share/gdm/guest-session/Xsession"
[ 16.066582] type=1505 audit(1285486450.416:6): operation="profile_replace" pid=784 name="/sbin/dhclient3"
[ 16.067246] type=1505 audit(1285486450.416:7): operation="profile_replace" pid=784 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.067599] type=1505 audit(1285486450.416:8): operation="profile_replace" pid=784 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.080189] type=1505 audit(1285486450.432:9): operation="profile_load" pid=785 name="/usr/bin/evince"
[ 16.109579] alloc irq_desc for 28 on node -1
[ 16.109582] alloc kstat_irqs on node -1
[ 16.109638] tg3 0000:02:00.0: irq 28 for MSI/MSI-X
[ 16.178240] type=1505 audit(1285486450.528:10): operation="profile_load" pid=785 name="/usr/bin/evince-previewer"
[ 16.191907] Console: switching to colour frame buffer device 160x50
[ 16.198162] hda_codec: ALC268: BIOS auto-probing.
[ 16.199022] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 16.205368] type=1505 audit(1285486450.556:11): operation="profile_load" pid=785 name="/usr/bin/evince-thumbnailer"
[ 16.428896] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.029624] ppdev: user-space parallel port driver
[ 27.500029] eth1: no IPv6 routers present
[ 5202.800047] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 5202.957240] usb 5-1: configuration #1 chosen from 1 choice
[ 5203.039699] Linux video capture interface: v2.00
[ 5203.058297] gspca: main v2.7.0 registered
[ 5203.070645] gspca: probing 0c45:613a
[ 5203.075086] sonixj: Sonix chip id: 12
[ 5203.077325] gspca: probe ok
[ 5203.077351] usbcore: registered new interface driver sonixj
[ 5203.078117] sonixj: registered
[ 5217.333128] usbcore: registered new interface driver sn9c20x
[ 5217.334161] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.04 loaded
[ 6457.923554] process `skype' is using obsolete setsockopt SO_BSDCOMPATè meglio che mi compri una webcam nuova?