IT/ITE8212 Dual channel ATA RAID controller
IT/ITE8212 Dual channel ATA RAID controller
Salve.
Premetto che ho gia' cercato nei forum ma non ho trovato nulla di non dico risolutivo ma nemmeno di tentabile.
Ho aggiornato da 9.10 a 10.04 LTS.
Risultato, il controller in oggetto ha smesso di funzionare, meglio ancora nella lista degli storage devices c'e' ma non appare nessun disco collegato.
Oltretutto al momento del boot si pianta la macchina e mi tocca porconare con una shell mai vista prima.
C'e' modo di risolvere il problema?
Saluti
Michele
Ps: dimenticavo, con la 9.10 il disco lo vedevo senza problemi e il boot era regolare.
Premetto che ho gia' cercato nei forum ma non ho trovato nulla di non dico risolutivo ma nemmeno di tentabile.
Ho aggiornato da 9.10 a 10.04 LTS.
Risultato, il controller in oggetto ha smesso di funzionare, meglio ancora nella lista degli storage devices c'e' ma non appare nessun disco collegato.
Oltretutto al momento del boot si pianta la macchina e mi tocca porconare con una shell mai vista prima.
C'e' modo di risolvere il problema?
Saluti
Michele
Ps: dimenticavo, con la 9.10 il disco lo vedevo senza problemi e il boot era regolare.
- pieddu
- Tenace Tecnocrate

- Messaggi: 13453
- Iscrizione: sabato 11 novembre 2006, 21:46
- Desktop: Mate XFCE
- Distribuzione: Devuan Trisquel
- Sesso: Maschile
- Località: Serravalle di Chienti (Taverne)
Re: IT/ITE8212 Dual channel ATA RAID controller
Perchè con la 9.10 funzionava?
Il mio è in un cassetto (E' una pci con raid ite8212 con 2 canali ide).
L'ultima che lo ha visto è la 7.10
Il mio è in un cassetto (E' una pci con raid ite8212 con 2 canali ide).
L'ultima che lo ha visto è la 7.10
Re: IT/ITE8212 Dual channel ATA RAID controller
Boh, so che funzionava 'sto accidente.
E' che il Pavillion dove ho installato Ubuntu non gestisce dischi p-ata e mi seccava perdere il vecchio 300 giga.
E' che il Pavillion dove ho installato Ubuntu non gestisce dischi p-ata e mi seccava perdere il vecchio 300 giga.
Re: IT/ITE8212 Dual channel ATA RAID controller
lsmod:
Module Size Used by
binfmt_misc 6587 1
ppdev 5259 0
snd_hda_codec_realtek 203374 1
snd_hda_intel 22037 2
snd_hda_codec 74201 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70694 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
tda18271 35267 1
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
tda8290 12092 1
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
tda10048 11153 1
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
snd_timer 19098 2 snd_pcm,snd_seq
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
nvidia 9961216 42
lirc_mceusb 12402 0
lirc_dev 8884 1 lirc_mceusb
cx23885 98201 0
cx2341x 12469 1 cx23885
v4l2_common 15431 2 cx23885,cx2341x
videodev 34361 2 cx23885,v4l2_common
v4l1_compat 13251 1 videodev
videobuf_dma_sg 10782 1 cx23885
videobuf_dvb 5175 1 cx23885
vga16fb 11385 1
snd 54148 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
dvb_core 86206 2 cx23885,videobuf_dvb
videobuf_core 16356 3 cx23885,videobuf_dma_sg,videobuf_dvb
btcx_risc 3624 1 cx23885
tveeprom 11102 1 cx23885
psmouse 63245 0
serio_raw 3978 0
intel_agp 24119 0
vgastate 8961 1 vga16fb
agpgart 31724 2 nvidia,intel_agp
rt2860sta 481561 1
soundcore 6620 1 snd
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
lp 7060 0
parport 32635 2 ppdev,lp
ohci1394 26950 0
usb_storage 39553 0
usbhid 36110 0
hid 67032 1 usbhid
ieee1394 81181 1 ohci1394
ahci 32200 2
pata_it821x 8595 0
r8169 34076 0
mii 4381 1 r8169
Ultima modifica di hanmarit il martedì 19 ottobre 2010, 14:59, modificato 1 volta in totale.
- pieddu
- Tenace Tecnocrate

- Messaggi: 13453
- Iscrizione: sabato 11 novembre 2006, 21:46
- Desktop: Mate XFCE
- Distribuzione: Devuan Trisquel
- Sesso: Maschile
- Località: Serravalle di Chienti (Taverne)
Re: IT/ITE8212 Dual channel ATA RAID controller
Quanti dischi ci sono collegati al controller?
Che raid hai fatto?
Posta
Da una live
Che raid hai fatto?
Posta
Codice: Seleziona tutto
dmesgRe: IT/ITE8212 Dual channel ATA RAID controller
Uno, IDEpieddu ha scritto: Quanti dischi ci sono collegati al controller?
Nessuno, lo uso come controller IDEpieddu ha scritto: Che raid hai fatto?
Devo ancora fare il cd, ma nn so come mai ora... funziona. =_=pieddu ha scritto: PostaDa una liveCodice: Seleziona tutto
dmesg
Deve essere perche' ho inserito il cd di XP minacciando di installarlo...
Intanto grazie
- pieddu
- Tenace Tecnocrate

- Messaggi: 13453
- Iscrizione: sabato 11 novembre 2006, 21:46
- Desktop: Mate XFCE
- Distribuzione: Devuan Trisquel
- Sesso: Maschile
- Località: Serravalle di Chienti (Taverne)
Re: IT/ITE8212 Dual channel ATA RAID controller
Ultimo piacere..... che così lo tiro fuori dal cassetto!
Postami il tuoora che funge.... quindi dal sistema "in moto"
Postami il tuo
Codice: Seleziona tutto
dmesgRe: IT/ITE8212 Dual channel ATA RAID controller
[ 0.430611] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.430615] pci 0000:00:1c.1: setting latency timer to 64
[ 0.430622] alloc irq_desc for 18 on node -1
[ 0.430624] alloc kstat_irqs on node -1
[ 0.430626] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.430630] pci 0000:00:1c.2: setting latency timer to 64
[ 0.430637] pci 0000:00:1e.0: setting latency timer to 64
[ 0.430641] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.430643] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.430645] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff]
[ 0.430647] pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfeafffff]
[ 0.430649] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.430651] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.430653] pci_bus 0000:04: resource 1 mem: [0xf9f00000-0xf9ffffff]
[ 0.430655] pci_bus 0000:04: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 0.430657] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
[ 0.430659] pci_bus 0000:03: resource 1 mem: [0xf9c00000-0xf9dfffff]
[ 0.430660] pci_bus 0000:03: resource 2 pref mem [0xf0200000-0xf03fffff]
[ 0.430662] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.430664] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.430666] pci_bus 0000:02: resource 2 pref mem [0xf8f00000-0xf8ffffff]
[ 0.430668] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.430670] pci_bus 0000:01: resource 1 mem: [0xf9b00000-0xf9bfffff]
[ 0.430672] pci_bus 0000:01: resource 2 pref mem [0xf0400000-0xf04fffff]
[ 0.430674] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.430676] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.430699] NET: Registered protocol family 2
[ 0.430766] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.430984] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.431259] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.431394] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.431396] TCP reno registered
[ 0.431448] NET: Registered protocol family 1
[ 0.431570] pci 0000:05:00.0: Boot video device
[ 0.431775] cpufreq-nforce2: No nForce2 chipset.
[ 0.431797] Scanning for low memory corruption every 60 seconds
[ 0.431865] audit: initializing netlink socket (disabled)
[ 0.431872] type=2000 audit(1287501145.431:1): initialized
[ 0.439455] highmem bounce pool size: 64 pages
[ 0.439459] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.440719] VFS: Disk quotas dquot_6.5.2
[ 0.440763] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.441207] fuse init (API version 7.13)
[ 0.441269] msgmni has been set to 1657
[ 0.441523] alg: No test for stdrng (krng)
[ 0.441579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.441581] io scheduler noop registered
[ 0.441583] io scheduler anticipatory registered
[ 0.441584] io scheduler deadline registered
[ 0.441613] io scheduler cfq registered (default)
[ 0.441721] alloc irq_desc for 24 on node -1
[ 0.441723] alloc kstat_irqs on node -1
[ 0.441729] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.441734] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.441823] alloc irq_desc for 25 on node -1
[ 0.441824] alloc kstat_irqs on node -1
[ 0.441831] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.441839] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.441955] alloc irq_desc for 26 on node -1
[ 0.441956] alloc kstat_irqs on node -1
[ 0.441963] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.441971] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.442086] alloc irq_desc for 27 on node -1
[ 0.442087] alloc kstat_irqs on node -1
[ 0.442094] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.442102] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.442180] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.442256] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.442328] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.442331] ACPI: Power Button [PWRB]
[ 0.442367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.442369] ACPI: Power Button [PWRF]
[ 0.442881] ACPI: SSDT cffb0270 00235 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[ 0.443068] processor LNXCPU:00: registered as cooling_device0
[ 0.443377] ACPI: SSDT cffb0700 00235 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.443553] processor LNXCPU:01: registered as cooling_device1
[ 0.443853] ACPI: SSDT cffb0b90 00235 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.444030] processor LNXCPU:02: registered as cooling_device2
[ 0.444331] ACPI: SSDT cffb1020 00235 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.444511] processor LNXCPU:03: registered as cooling_device3
[ 0.446139] isapnp: Scanning for PnP cards...
[ 0.447116] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.448168] brd: module loaded
[ 0.448518] loop: module loaded
[ 0.448577] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.448874] Fixed MDIO Bus: probed
[ 0.448899] PPP generic driver version 2.4.2
[ 0.448922] tun: Universal TUN/TAP device driver, 1.6
[ 0.448923] tun: (C) 1999-2004 Max Krasnyansky
[ 0.448983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.448999] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.449007] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.449009] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.449034] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.449055] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.452954] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.452966] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9afec00
[ 0.467312] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.467372] usb usb1: configuration #1 chosen from 1 choice
[ 0.467394] hub 1-0:1.0: USB hub found
[ 0.467399] hub 1-0:1.0: 4 ports detected
[ 0.467439] alloc irq_desc for 23 on node -1
[ 0.467441] alloc kstat_irqs on node -1
[ 0.467445] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.467452] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.467454] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.467481] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.467499] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.471387] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.471399] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9aff800
[ 0.483309] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.483361] usb usb2: configuration #1 chosen from 1 choice
[ 0.483381] hub 2-0:1.0: USB hub found
[ 0.483386] hub 2-0:1.0: 8 ports detected
[ 0.483431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.483442] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.483457] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.483461] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.483464] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.483487] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.483514] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a400
[ 0.483578] usb usb3: configuration #1 chosen from 1 choice
[ 0.483596] hub 3-0:1.0: USB hub found
[ 0.483601] hub 3-0:1.0: 2 ports detected
[ 0.483634] alloc irq_desc for 21 on node -1
[ 0.483636] alloc kstat_irqs on node -1
[ 0.483639] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.483644] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.483647] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.483668] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.483694] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480
[ 0.483757] usb usb4: configuration #1 chosen from 1 choice
[ 0.483775] hub 4-0:1.0: USB hub found
[ 0.483780] hub 4-0:1.0: 2 ports detected
[ 0.483813] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.483817] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.483820] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.483843] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.483863] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a800
[ 0.483928] usb usb5: configuration #1 chosen from 1 choice
[ 0.483946] hub 5-0:1.0: USB hub found
[ 0.483951] hub 5-0:1.0: 2 ports detected
[ 0.483982] alloc irq_desc for 19 on node -1
[ 0.483984] alloc kstat_irqs on node -1
[ 0.483987] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.483991] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.483994] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.484017] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.484043] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a880
[ 0.484107] usb usb6: configuration #1 chosen from 1 choice
[ 0.484125] hub 6-0:1.0: USB hub found
[ 0.484129] hub 6-0:1.0: 2 ports detected
[ 0.484162] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.484167] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.484170] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.484191] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.484211] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ac00
[ 0.484277] usb usb7: configuration #1 chosen from 1 choice
[ 0.484295] hub 7-0:1.0: USB hub found
[ 0.484299] hub 7-0:1.0: 2 ports detected
[ 0.484333] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.484338] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.484340] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.484365] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.484385] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b000
[ 0.484447] usb usb8: configuration #1 chosen from 1 choice
[ 0.484465] hub 8-0:1.0: USB hub found
[ 0.484469] hub 8-0:1.0: 2 ports detected
[ 0.484547] PNP: No PS/2 controller found. Probing ports directly.
[ 0.486733] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.486738] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.486817] mice: PS/2 mouse device common for all mice
[ 0.486905] rtc_cmos 00:03: RTC can wake from S4
[ 0.486931] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.486956] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.487030] device-mapper: uevent: version 1.0.3
[ 0.487110] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.487218] device-mapper: multipath: version 1.1.0 loaded
[ 0.487220] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.487307] EISA: Probing bus 0 at eisa.0
[ 0.487311] Cannot allocate resource for EISA slot 1
[ 0.487313] Cannot allocate resource for EISA slot 2
[ 0.487328] EISA: Detected 0 cards.
[ 0.487476] cpuidle: using governor ladder
[ 0.487477] cpuidle: using governor menu
[ 0.487799] TCP cubic registered
[ 0.487912] NET: Registered protocol family 10
[ 0.488263] lo: Disabled Privacy Extensions
[ 0.488518] NET: Registered protocol family 17
[ 0.489286] Using IPI No-Shortcut mode
[ 0.489334] PM: Resume from disk failed.
[ 0.489343] registered taskstats version 1
[ 0.489873] Magic number: 14:211:235
[ 0.489923] rtc_cmos 00:03: setting system clock to 2010-10-19 15:12:26 UTC (1287501146)
[ 0.489925] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.489926] EDD information not available.
[ 0.502535] Freeing initrd memory: 7782k freed
[ 0.799092] isapnp: No Plug & Play device found
[ 0.799111] Freeing unused kernel memory: 656k freed
[ 0.799371] Write protecting the kernel text: 4684k
[ 0.799413] Write protecting the kernel read-only data: 1840k
[ 0.812487] udev: starting version 151
[ 0.834006] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.834043] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.834128] r8169 0000:02:00.0: setting latency timer to 64
[ 0.834265] alloc irq_desc for 28 on node -1
[ 0.834267] alloc kstat_irqs on node -1
[ 0.834302] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
[ 0.834829] eth0: RTL8168c/8111c at 0xf8054000, 00:22:15:33:db:34, XID 1c4000c0 IRQ 28
[ 0.839206] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 0.853532] pata_it821x 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.853537] pata_it821x: controller in smart mode.
[ 0.853571] pata_it821x 0000:01:00.0: setting latency timer to 64
[ 0.862855] ahci 0000:00:1f.2: version 3.0
[ 0.862868] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.862904] alloc irq_desc for 29 on node -1
[ 0.862905] alloc kstat_irqs on node -1
[ 0.862915] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 0.862926] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 0.862960] ahci: SSS flag set, parallel bus scan disabled
[ 0.863003] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 0.863005] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ccc ems sxs
[ 0.863014] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.863528] it821x_firmware_command: timeout
[ 0.863605] scsi0 : pata_it821x
[ 0.863703] scsi1 : pata_it821x
[ 0.863744] ata1: PATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
[ 0.863746] ata2: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
[ 0.863808] alloc irq_desc for 20 on node -1
[ 0.863811] alloc kstat_irqs on node -1
[ 0.863818] ohci1394 0000:01:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.903067] scsi2 : ahci
[ 0.903153] scsi3 : ahci
[ 0.903229] scsi4 : ahci
[ 0.903299] scsi5 : ahci
[ 0.903368] scsi6 : ahci
[ 0.903444] scsi7 : ahci
[ 0.903581] ata3: SATA max UDMA/133 abar m2048@0xf9aff000 port 0xf9aff100 irq 29
[ 0.903584] ata4: SATA max UDMA/133 abar m2048@0xf9aff000 port 0xf9aff180 irq 29
[ 0.903586] ata5: SATA max UDMA/133 abar m2048@0xf9aff000 port 0xf9aff200 irq 29
[ 0.903589] ata6: SATA max UDMA/133 abar m2048@0xf9aff000 port 0xf9aff280 irq 29
[ 0.903591] ata7: SATA max UDMA/133 abar m2048@0xf9aff000 port 0xf9aff300 irq 29
[ 0.903594] ata8: SATA max UDMA/133 abar m2048@0xf9aff000 port 0xf9aff380 irq 29
[ 0.920892] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[f9bff000-f9bff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 0.972322] usb 2-5: configuration #1 chosen from 1 choice
[ 0.972549] hub 2-5:1.0: USB hub found
[ 0.972878] hub 2-5:1.0: 4 ports detected
[ 1.212010] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 1.224020] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.244587] ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
[ 1.244591] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.246595] ata3.00: configured for UDMA/133
[ 1.392104] usb 4-2: configuration #1 chosen from 1 choice
[ 1.402275] usbcore: registered new interface driver hiddev
[ 1.416780] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3
[ 1.416838] generic-usb 0003:03F0:0F0C.0001: input,hidraw0: USB HID v1.11 Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:00:1a.1-2/input0
[ 1.452944] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input4
[ 1.453025] generic-usb 0003:03F0:0F0C.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:00:1a.1-2/input1
[ 1.453044] usbcore: registered new interface driver usbhid
[ 1.453046] usbhid: v2.6:USB HID core driver
[ 1.468307] usb 2-5.1: new high speed USB device using ehci_hcd and address 3
[ 2.036268] ata1.01: ATA-7: Maxtor 6L300R0, BAJ41G20, max UDMA/133
[ 2.036271] ata1.01: 586114704 sectors, multi 0: LBA48
[ 2.036288] ata1.01: configured for DMA
[ 2.036388] scsi 0:0:1:0: Direct-Access ATA Maxtor 6L300R0 BAJ4 PQ: 0 ANSI: 5
[ 2.036538] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 2.036554] sd 0:0:1:0: [sda] 586114704 512-byte logical blocks: (300 GB/279 GiB)
[ 2.036611] sd 0:0:1:0: [sda] Write Protect is off
[ 2.036613] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.036632] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.036743] sda: sda1
[ 2.055628] sd 0:0:1:0: [sda] Attached SCSI disk
[ 2.192157] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 2.192273] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.192294] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.192312] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.192314] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.192338] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.192452] sdb:
[ 2.195254] usb 2-5.1: configuration #1 chosen from 1 choice
[ 2.201144] Initializing USB Mass Storage driver...
[ 2.201166] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000155d081]
[ 2.201265] scsi8 : SCSI emulation for USB Mass Storage devices
[ 2.201336] usb-storage: device found at 3
[ 2.201343] usb-storage: waiting for device to settle before scanning
[ 2.201353] usbcore: registered new interface driver usb-storage
[ 2.201355] USB Mass Storage support registered.
[ 2.250743] sdb1 sdb2
[ 2.280118] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.363354] usb 2-5.2: configuration #1 chosen from 1 choice
[ 2.364853] generic-usb 0003000A.0003: hiddev97,hidraw2: USB HID v1.11 Device [Topseed Technology Corp. eHome Infrared Transceiver] on usb-0000:00:1d.7-5.2/input1
[ 2.916020] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.920627] ata4.00: ATAPI: HL-DT-ST BDDVDRW GBC-H20L, 1.B8, max UDMA/100
[ 2.926827] ata4.00: configured for UDMA/100
[ 2.952199] scsi 3:0:0:0: CD-ROM HL-DT-ST BDDVDRW GBC-H20L 1.B8 PQ: 0 ANSI: 5
[ 2.957233] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.957237] Uniform CD-ROM driver Revision: 3.20
[ 2.957331] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.957387] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 3.680019] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.686431] ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
[ 3.686434] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.688442] ata5.00: configured for UDMA/133
[ 3.704090] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 3.704218] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.704230] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 3.704257] sd 4:0:0:0: [sdc] Write Protect is off
[ 3.704259] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.704292] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.704386] sdc: sdc1
[ 3.713652] sdc: p1 size 976782082 exceeds device capacity, limited to end of disk
[ 3.713825] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 4.024017] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.360017] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.696016] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.923399] kjournald starting. Commit interval 5 seconds
[ 4.923406] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.200282] usb-storage: device scan complete
[ 7.206595] scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 7.212834] scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 7.219080] scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 7.225343] scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 7.225927] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 7.226043] sd 8:0:0:1: Attached scsi generic sg5 type 0
[ 7.226167] sd 8:0:0:2: Attached scsi generic sg6 type 0
[ 7.226306] sd 8:0:0:3: Attached scsi generic sg7 type 0
[ 7.229686] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 7.230442] sd 8:0:0:2: [sdf] Attached SCSI removable disk
[ 7.231175] sd 8:0:0:1: [sde] Attached SCSI removable disk
[ 7.231943] sd 8:0:0:3: [sdg] Attached SCSI removable disk
[ 17.404417] udev: starting version 151
[ 17.412839] lp: driver loaded but no devices found
[ 17.421199] vga16fb: initializing
[ 17.421203] vga16fb: mapped to 0xc00a0000
[ 17.421293] fb0: VGA16 VGA frame buffer device
[ 17.432706] Linux agpgart interface v0.103
[ 17.508816] Adding 9823708k swap on /dev/sdb5. Priority:-1 extents:1 across:9823708k
[ 17.528133] nvidia: module license 'NVIDIA' taints kernel.
[ 17.528136] Disabling lock debugging due to kernel taint
[ 17.574346] type=1505 audit(1287501163.582:2): operation="profile_load" pid=684 name="/sbin/dhclient3"
[ 17.574855] type=1505 audit(1287501163.582:3): operation="profile_load" pid=684 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.575126] type=1505 audit(1287501163.582:4): operation="profile_load" pid=684 name="/usr/lib/connman/scripts/dhclient-script"
[ 18.152658] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 18.156639] rt2860 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.156700]
[ 18.156701]
[ 18.156701] === pAd = f9d52000, size = 580808 ===
[ 18.156702]
[ 18.156703] , Martin Blatter , Dan Conti
[ 18.176294] Linux video capture interface: v2.00
[ 18.184572] cx23885 driver version 0.0.2 loaded
[ 18.184610] cx23885 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.184645] CORE cx23885[0]: subsystem: 0070:71d3, board: Hauppauge WinTV-HVR1200 [card=7,autodetected]
[ 18.242774] usb 2-5.2: reset full speed USB device using ehci_hcd and address 4
[ 18.247027] alloc irq_desc for 22 on node -1
[ 18.247028] alloc kstat_irqs on node -1
[ 18.247034] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 18.247063] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 18.263542] EXT3 FS on sdb1, internal journal
[ 18.300273] Console: switching to colour frame buffer device 80x30
[ 18.348908] hda_codec: ALC1200: BIOS auto-probing.
[ 18.350331] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 18.350484] lirc_dev: lirc_register_driver: sample_rate: 0
[ 18.351239] tveeprom 0-0050: Hauppauge model 71949, rev H2E9, serial# 5100861
[ 18.351242] tveeprom 0-0050: MAC address is 00-0D-FE-4D-D5-3D
[ 18.351244] tveeprom 0-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
[ 18.351247] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 18.351249] tveeprom 0-0050: audio processor is CX23885 (idx 39)
[ 18.351251] tveeprom 0-0050: decoder processor is CX23885 (idx 33)
[ 18.351253] tveeprom 0-0050: has no radio
[ 18.351255] cx23885[0]: hauppauge eeprom: model=71949
[ 18.351256] cx23885_dvb_register() allocating 1 frontend(s)
[ 18.351258] cx23885[0]: cx23885 based dvb card
[ 18.351741] lirc_mceusb[4]: Topseed Technology Corp. eHome Infrared Transceiver on usb2:4
[ 18.352006] usbcore: registered new interface driver lirc_mceusb
[ 18.368762] tda829x 1-0042: type set to tda8295
[ 18.390856] nvidia 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.390863] nvidia 0000:05:00.0: setting latency timer to 64
[ 18.390866] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 18.390972] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
[ 18.404674] tda18271 1-0060: creating new instance
[ 18.444347] TDA18271HD/C1 detected @ 1-0060
[ 18.555228] type=1505 audit(1287501164.563:5): operation="profile_load" pid=937 name="/usr/share/gdm/guest-session/Xsession"
[ 18.556665] type=1505 audit(1287501164.563:6): operation="profile_replace" pid=938 name="/sbin/dhclient3"
[ 18.557195] type=1505 audit(1287501164.567:7): operation="profile_replace" pid=938 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 18.557470] type=1505 audit(1287501164.567:8): operation="profile_replace" pid=938 name="/usr/lib/connman/scripts/dhclient-script"
[ 18.559795] type=1505 audit(1287501164.567:9): operation="profile_load" pid=939 name="/usr/bin/evince"
[ 18.566329] type=1505 audit(1287501164.575:10): operation="profile_load" pid=939 name="/usr/bin/evince-previewer"
[ 18.570470] type=1505 audit(1287501164.579:11): operation="profile_load" pid=939 name="/usr/bin/evince-thumbnailer"
[ 18.654808] RX DESC f6742000 size = 2048
[ 18.654943] Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 18.658263] 1. Phy Mode = 0
[ 18.658265] 2. Phy Mode = 0
[ 18.681670] 3. Phy Mode = 0
[ 18.704206] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 18.704208] MCS Set = 00 00 00 00 00
[ 18.705808] rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
[ 24.458529] UDF-fs: No VRS found
[ 24.458532] UDF-fs: No partition found (1)
[ 29.092007] wlan0: no IPv6 routers present
[ 70.206176] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 75.212307] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 202
[ 75.212455] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6)
[ 104.512601] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
[ 144.509028] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 202
[ 204.516240] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
[ 284.510916] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
[ 384.514065] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
[ 504.514140] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
[ 624.512177] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
[ 744.511096] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
[ 864.514094] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
[ 984.511150] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
[ 1104.512031] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
[ 1224.514120] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 100
Chi c’è in linea
Visualizzano questa sezione: 0 utenti iscritti e 6 ospiti