scusa se rispondo ma seguendo i vari passaggi non riesco proprio a far funzionare la radio, la barra del dispositivo radio in pulseaudio si muove ma non sento l'audio :'(
Codice: Seleziona tutto
~$ dmesg | grep radio
[ 18.720839] cx88[0]/0: registered device radio0
~$ alsamixer
impossibile caricare i controlli del mixer: Argomento non valido
"pacmd info" :
Codice: Seleziona tutto
volume: 0: 72% 1: 72%
0: -8,70 dB 1: -8,70 dB
balance 0,00
base volume: 100%
0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le ch 2 48000 Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 20,00 ms; range is 1,00 .. 1365,33 ms
card: 1 <alsa_card.pci-0000_07_00.1>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CX88 Digital"
alsa.id = "CX88 Digital"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "Conexant CX8801"
alsa.long_card_name = "Conexant CX8801 at 0xfa000000"
alsa.driver_name = "cx88_alsa"
device.bus_path = "pci-0000:07:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:06:00.0/0000:07:00.1/sound/card2"
device.bus = "pci"
device.vendor.id = "14f1"
device.vendor.name = "Conexant Systems, Inc."
device.product.id = "8801"
device.product.name = "CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port]"
device.string = "hw:2"
device.buffering.buffer_size = "262144"
device.buffering.fragment_size = "1024"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] Analog Stereo"
alsa.mixer_name = "CX88"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 3
name: <alsa_input.usb-05c5_6ab5-01-U0x5c50x6ab5.analog-mono>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9049
volume: 0: 86%
0: -4,06 dB
balance 0,00
base volume: 15%
-50,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le ch 1 48000 Hz
channel map: mono
Mono
used by: 1
linked by: 1
configured latency: 20,00 ms; range is 1,00 .. 2000,00 ms
card: 2 <alsa_card.usb-05c5_6ab5-01-U0x5c50x6ab5>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "USB Device 0x5c5:0x6ab5"
alsa.long_card_name = "USB Device 0x5c5:0x6ab5 at usb-0000:00:1d.0-1.1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.1:1.1"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/sound/card1"
udev.id = "usb-05c5_6ab5-01-U0x5c50x6ab5"
device.bus = "usb"
device.vendor.id = "05c5"
device.vendor.name = "Digi International, Inc."
device.product.id = "6ab5"
device.product.name = "6ab5"
device.serial = "05c5_6ab5"
device.string = "hw:1"
device.buffering.buffer_size = "192000"
device.buffering.fragment_size = "96000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-mono"
device.profile.description = "Analog Mono"
device.description = "6ab5 Analog Mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB05c5:6ab5"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
7 client(s) logged in.
index: 0
driver: <module-console-kit.c>
owner module: 21
properties:
application.name = "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
console-kit.session = "/org/freedesktop/ConsoleKit/Session1"
index: 1
driver: <protocol-native.c>
owner module: 10
properties:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "2.30.1"
application.process.id = "1970"
application.process.user = "giggio"
application.process.host = "giggio-desktop"
application.process.binary = "gnome-settings-daemon"
window.x11.display = ":0.0"
application.language = "it_IT.utf8"
application.process.machine_id = "635969a32435183c7d0f500a4e713fc2"
application.process.session_id = "635969a32435183c7d0f500a4e713fc2-1316698935.229393-422739409"
index: 4
driver: <protocol-native.c>
owner module: 10
properties:
application.name = "ayatana.indicator.sound"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.process.id = "2152"
application.process.user = "giggio"
application.process.host = "giggio-desktop"
application.process.binary = "indicator-sound-service"
application.language = "it_IT.utf8"
window.x11.display = ":0.0"
application.process.machine_id = "635969a32435183c7d0f500a4e713fc2"
application.process.session_id = "635969a32435183c7d0f500a4e713fc2-1316698935.229393-422739409"
index: 9
driver: <module-x11-xsmp.c>
owner module: 27
properties:
application.name = "XSMP Session on gnome-session as 10c142acaa20a20c64131669894410456100000019160033"
xsmp.vendor = "gnome-session"
xsmp.client.id = "10c142acaa20a20c64131669894410456100000019160033"
index: 12
driver: <protocol-esound.c>
owner module: 9
properties:
application.name = "EsounD client (UNIX socket client)"
esound-protocol.peer = "UNIX socket client"
esound.byte_order = "native"
index: 15
driver: <protocol-native.c>
owner module: 10
properties:
application.name = "Regolazione del volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "0.9.9"
application.process.id = "2584"
application.process.user = "giggio"
application.process.host = "giggio-desktop"
application.process.binary = "pavucontrol"
window.x11.display = ":0.0"
application.language = "it_IT.utf8"
application.process.machine_id = "635969a32435183c7d0f500a4e713fc2"
application.process.session_id = "635969a32435183c7d0f500a4e713fc2-1316698935.229393-422739409"
index: 29
driver: <cli.c>
owner module: 28
properties:
application.name = "UNIX socket client"
3 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 4
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf8100000 irq 22"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1c20"
device.product.name = "Cougar Point High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio interno"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:analog-stereo: Analog Stereo Output (priority 6000)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060)
output:iec958-stereo: Digital Stereo Duplex (IEC958) (priority 5500)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5560)
input:analog-stereo: Analog Stereo Input (priority 60)
off: Spento (priority 0)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Audio interno Analog Stereo
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Audio interno Analog Stereo
alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Audio interno Analog Stereo
index: 1
name: <alsa_card.pci-0000_07_00.1>
driver: <module-alsa-card.c>
owner module: 5
properties:
alsa.card = "2"
alsa.card_name = "Conexant CX8801"
alsa.long_card_name = "Conexant CX8801 at 0xfa000000"
alsa.driver_name = "cx88_alsa"
device.bus_path = "pci-0000:07:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:06:00.0/0000:07:00.1/sound/card2"
device.bus = "pci"
device.vendor.id = "14f1"
device.vendor.name = "Conexant Systems, Inc."
device.product.id = "8801"
device.product.name = "CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port]"
device.string = "2"
device.description = "CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 60)
off: Spento (priority 0)
active profile: <input:analog-stereo>
sources:
alsa_input.pci-0000_07_00.1.analog-stereo/#2: CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] Analog Stereo
index: 2
name: <alsa_card.usb-05c5_6ab5-01-U0x5c50x6ab5>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "1"
alsa.card_name = "USB Device 0x5c5:0x6ab5"
alsa.long_card_name = "USB Device 0x5c5:0x6ab5 at usb-0000:00:1d.0-1.1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.1:1.1"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/sound/card1"
udev.id = "usb-05c5_6ab5-01-U0x5c50x6ab5"
device.bus = "usb"
device.vendor.id = "05c5"
device.vendor.name = "Digi International, Inc."
device.product.id = "6ab5"
device.product.name = "6ab5"
device.serial = "05c5_6ab5"
device.string = "1"
device.description = "6ab5"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
profiles:
input:analog-mono: Analog Mono Input (priority 1)
off: Spento (priority 0)
active profile: <input:analog-mono>
sources:
alsa_input.usb-05c5_6ab5-01-U0x5c50x6ab5.analog-mono/#3: 6ab5 Analog Mono
1 sink input(s) available.
index: 0
driver: <module-loopback.c>
flags: VARIABLE_RATE
state: RUNNING
sink: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo>
volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
muted: no
current latency: 52,88 ms
requested latency: 66,67 ms
sample spec: s16le ch 2 44100 Hz
channel map: front-left,front-right
Stereo
resample method: speex-float-1
module: 23
properties:
media.name = "Loopback of Audio interno Analog Stereo"
media.icon_name = "audio-card-pci"
media.role = "abstract"
module-stream-restore.id = "sink-input-by-media-role:abstract"
6 source outputs(s) available.
index: 0
driver: <module-loopback.c>
flags:
state: RUNNING
source: 1 <alsa_input.pci-0000_00_1b.0.analog-stereo>
current latency: 0,00 ms
requested latency: 66,67 ms
sample spec: s16le ch 2 44100 Hz
channel map: front-left,front-right
Stereo
resample method: (null)
owner module: 23
properties:
media.name = "Loopback to Audio interno Analog Stereo"
media.icon_name = "audio-card-pci"
media.role = "abstract"
module-stream-restore.id = "source-output-by-media-role:abstract"
index: 1
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
current latency: 9,73 ms
requested latency: 20,00 ms
sample spec: float32le ch 1 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 10
client: 15 <Regolazione del volume PulseAudio>
properties:
media.name = "Rilevato picco"
application.name = "Regolazione del volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "0.9.9"
application.process.id = "2584"
application.process.user = "giggio"
application.process.host = "giggio-desktop"
application.process.binary = "pavucontrol"
window.x11.display = ":0.0"
application.language = "it_IT.utf8"
application.process.machine_id = "635969a32435183c7d0f500a4e713fc2"
application.process.session_id = "635969a32435183c7d0f500a4e713fc2-1316698935.229393-422739409"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 2
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 1 <alsa_input.pci-0000_00_1b.0.analog-stereo>
current latency: 0,00 ms
requested latency: 20,00 ms
sample spec: float32le ch 1 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 10
client: 15 <Regolazione del volume PulseAudio>
properties:
media.name = "Rilevato picco"
application.name = "Regolazione del volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "0.9.9"
application.process.id = "2584"
application.process.user = "giggio"
application.process.host = "giggio-desktop"
application.process.binary = "pavucontrol"
window.x11.display = ":0.0"
application.language = "it_IT.utf8"
application.process.machine_id = "635969a32435183c7d0f500a4e713fc2"
application.process.session_id = "635969a32435183c7d0f500a4e713fc2-1316698935.229393-422739409"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 3
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 2 <alsa_input.pci-0000_07_00.1.analog-stereo>
current latency: 0,00 ms
requested latency: 20,00 ms
sample spec: float32le ch 1 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 10
client: 15 <Regolazione del volume PulseAudio>
properties:
media.name = "Rilevato picco"
application.name = "Regolazione del volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "0.9.9"
application.process.id = "2584"
application.process.user = "giggio"
application.process.host = "giggio-desktop"
application.process.binary = "pavucontrol"
window.x11.display = ":0.0"
application.language = "it_IT.utf8"
application.process.machine_id = "635969a32435183c7d0f500a4e713fc2"
application.process.session_id = "635969a32435183c7d0f500a4e713fc2-1316698935.229393-422739409"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 4
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 3 <alsa_input.usb-05c5_6ab5-01-U0x5c50x6ab5.analog-mono>
current latency: 0,00 ms
requested latency: 20,00 ms
sample spec: float32le ch 1 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 10
client: 15 <Regolazione del volume PulseAudio>
properties:
media.name = "Rilevato picco"
application.name = "Regolazione del volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "0.9.9"
application.process.id = "2584"
application.process.user = "giggio"
application.process.host = "giggio-desktop"
application.process.binary = "pavucontrol"
window.x11.display = ":0.0"
application.language = "it_IT.utf8"
application.process.machine_id = "635969a32435183c7d0f500a4e713fc2"
application.process.session_id = "635969a32435183c7d0f500a4e713fc2-1316698935.229393-422739409"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 5
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
current latency: 14,35 ms
requested latency: 20,00 ms
sample spec: float32le ch 1 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 10
client: 15 <Regolazione del volume PulseAudio>
direct on input: 0
properties:
media.name = "Rilevato picco"
application.name = "Regolazione del volume PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "16"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "0.9.9"
application.process.id = "2584"
application.process.user = "giggio"
application.process.host = "giggio-desktop"
application.process.binary = "pavucontrol"
window.x11.display = ":0.0"
application.language = "it_IT.utf8"
application.process.machine_id = "635969a32435183c7d0f500a4e713fc2"
application.process.session_id = "635969a32435183c7d0f500a4e713fc2-1316698935.229393-422739409"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
0 cache entrie(s) available.
