Forum Ubuntu-it

Ciao ragazzi mi affido alla vostra professionalità come sempre. Premesse:

- Iphone 3g (con jailbreak - OS 4.2.1 - 8 Giga) visto dal sistema (almeno presumo) perchè il comando ideviceinfo mi restituisce tutti i dati;
- le librerie necessarie dovrebbero essere installate;
- Uso Ubuntu 10.04.

Problema: non vedo l'icona dell'iphone, cioè il dispositivo seppur riconosciuto non appare montato.

Ho provato la seguente procedura ma senza successo:

aggiungi i ppa ai tuoi repository, in pratica da terminale:

sudo add-apt-repository ppa:pmcenery/ppa

poi aggiorna i pacchetti, da terminale:

sudo apt-get update
sudo apt-get upgrade

se ancora non funziona, installare libimobiledevice-utils
da terminale:

sudo apt-get install libimobiledevice-utils

eseguire da terminale:

idevicepair unpair
idevicepair pair
idevicepair validate

Che cosa provare ancora?

Se vai in sistema>computer (o file system) non vedi l'icona dell'iphone? Se la vedi è montato, ti manca solo l'icona sul desktop.

Ciao.

Visto che sembra non montarlo, postami il comando

Codice: Seleziona tutto

dmesg

e del comando

Codice: Seleziona tutto

mount

Così vediamo qual'è il problema ;)

dmesg

Codice: Seleziona tutto

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-34-generic-pae (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #77-Ubuntu SMP Tue Sep 13 21:16:18 UTC 2011 (Ubuntu 2.6.32-34.77-generic-pae 2.6.32.44+drm33.19)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bdea8000 (usable)
[    0.000000]  BIOS-e820: 00000000bdea8000 - 00000000bded0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bded0000 - 00000000bdee1000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdee1000 - 00000000bdee2000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdee2000 - 00000000bdf0a000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdf0a000 - 00000000bdf0b000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdf0b000 - 00000000bdf0c000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdf0c000 - 00000000bdf17000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bdf17000 - 00000000bdf1d000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdf1d000 - 00000000bdf39000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdf39000 - 00000000be000000 (usable)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] DMI 2.4 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009bc00 (usable)
[    0.000000]  modified: 000000000009bc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000bdea8000 (usable)
[    0.000000]  modified: 00000000bdea8000 - 00000000bded0000 (ACPI NVS)
[    0.000000]  modified: 00000000bded0000 - 00000000bdee1000 (reserved)
[    0.000000]  modified: 00000000bdee1000 - 00000000bdee2000 (ACPI NVS)
[    0.000000]  modified: 00000000bdee2000 - 00000000bdf0a000 (reserved)
[    0.000000]  modified: 00000000bdf0a000 - 00000000bdf0b000 (ACPI NVS)
[    0.000000]  modified: 00000000bdf0b000 - 00000000bdf0c000 (reserved)
[    0.000000]  modified: 00000000bdf0c000 - 00000000bdf17000 (ACPI data)
[    0.000000]  modified: 00000000bdf17000 - 00000000bdf1d000 (ACPI NVS)
[    0.000000]  modified: 00000000bdf1d000 - 00000000bdf39000 (reserved)
[    0.000000]  modified: 00000000bdf39000 - 00000000be000000 (usable)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] initial memory mapped : 0 - 00e00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000
[    0.000000] RAMDISK: 3785c000 - 37fef1ff
[    0.000000] Allocated new RAMDISK: 00941000 - 010d41ff
[    0.000000] Move RAMDISK from 000000003785c000 - 0000000037fef1fe to 00941000 - 010d41fe
[    0.000000] ACPI: RSDP 000f03b0 00024 (v02   Sony)
[    0.000000] ACPI: XSDT bdf15f10 0005C (v01   Sony     VAIO 20080918 MSFT 00010013)
[    0.000000] ACPI: FACP bdf0aa90 000F4 (v04   Sony     VAIO 20080918 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - BDF1CE40/00000000BDF1CD40, using 32 (20090903/tbfadt-486)
[    0.000000] ACPI: DSDT bdf0c010 07AFE (v01   Sony     VAIO 20080918 INTL 20051117)
[    0.000000] ACPI: FACS bdf1ce40 00040
[    0.000000] ACPI: APIC bdf14f10 0006C (v02   Sony     VAIO 20080918 MSFT 00010013)
[    0.000000] ACPI: MCFG bdf1bc90 0003C (v01   Sony     VAIO 20080918 MSFT 00000097)
[    0.000000] ACPI: HPET bdf1bc10 00038 (v01   Sony     VAIO 20080918 MSFT 00010013)
[    0.000000] ACPI: SLIC bdf17c10 00176 (v01   Sony     VAIO 20080918 Sony 01000000)
[    0.000000] ACPI: SSDT bdee1590 00505 (v01   Sony     VAIO 20080918 INTL 20051117)
[    0.000000] ACPI: SSDT bdeccc10 002E4 (v01   Sony     VAIO 20080918 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4230MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000]   node 0 low ram: 00000000 - 379fe000
[    0.000000]   node 0 bootmap 00012000 - 00018f40
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 0000938818]    TEXT DATA BSS ==> [0000100000 - 0000938818]
[    0.000000]   #4 [000009bc00 - 0000100000]    BIOS reserved ==> [000009bc00 - 0000100000]
[    0.000000]   #5 [0000939000 - 0000940198]              BRK ==> [0000939000 - 0000940198]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000941000 - 00010d41ff]      NEW RAMDISK ==> [0000941000 - 00010d41ff]
[    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
[    0.000000] found SMP MP-table at [c00fd690] fd690
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x000bdea8
[    0.000000]     0: 0x000bdf39 -> 0x000be000
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 1040122
[    0.000000] free_area_init_node: node 0, pgdat c07d8e00, node_mem_map c10d6200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3947 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 8461 pages used for memmap
[    0.000000]   HighMem zone: 803940 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at be000000 (gap: be000000:22000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 15 pages/cpu @c3a00000 s39736 r0 d21704 u524288
[    0.000000] pcpu-alloc: s39736 r0 d21704 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1029881
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-34-generic-pae root=UUID=3ed115c1-7dff-493b-89eb-e3e003fef7f9 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] allocated 26214080 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000379fe:00140000)
[    0.000000] Memory: 4075440k/5242880k available (4832k kernel code, 83904k reserved, 2221k data, 684k init, 3249604k highmem)

Codice: Seleziona tutto

[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc07e4000 - 0xc088f000   ( 684 kB)
[    0.000000]       .data : 0xc05b815f - 0xc07e3788   (2221 kB)
[    0.000000]       .text : 0xc0100000 - 0xc05b815f   (4832 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:440
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2393.672 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.34 BogoMIPS (lpj=9574688)
[    0.004018] Security Framework initialized
[    0.004034] AppArmor: AppArmor initialized
[    0.004040] Mount-cache hash table entries: 512
[    0.004147] Initializing cgroup subsys ns
[    0.004151] Initializing cgroup subsys cpuacct
[    0.004155] Initializing cgroup subsys memory
[    0.004161] Initializing cgroup subsys devices
[    0.004163] Initializing cgroup subsys freezer
[    0.004165] Initializing cgroup subsys net_cls
[    0.004183] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004185] CPU: L2 cache: 3072K
[    0.004188] CPU: Physical Processor ID: 0
[    0.004189] CPU: Processor Core ID: 0
[    0.004192] mce: CPU supports 6 MCE banks
[    0.004200] CPU0: Thermal monitoring enabled (TM2)
[    0.004203] using mwait in idle threads.
[    0.004208] Performance Events: Core2 events, Intel PMU driver.
[    0.004213] ... version:                2
[    0.004214] ... bit width:              40
[    0.004216] ... generic registers:      2
[    0.004217] ... value mask:             000000ffffffffff
[    0.004219] ... max period:             000000007fffffff
[    0.004220] ... fixed-purpose events:   3
[    0.004222] ... event mask:             0000000700000003
[    0.004227] Checking 'hlt' instruction... OK.
[    0.022542] ACPI: Core revision 20090903
[    0.036018] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.036022] ftrace: allocating 22362 entries in 44 pages
[    0.040058] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.040336] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.083222] CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 0a
[    0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 3072K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.168070] CPU1: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 0a
[    0.168077] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.172016] Brought up 2 CPUs
[    0.172019] Total of 2 processors activated (9574.09 BogoMIPS).
[    0.173112] CPU0 attaching sched-domain:
[    0.173115]  domain 0: span 0-1 level MC
[    0.173117]   groups: 0 1
[    0.173122] CPU1 attaching sched-domain:
[    0.173124]  domain 0: span 0-1 level MC
[    0.173126]   groups: 1 0
[    0.173179] devtmpfs: initialized
[    0.173179] regulator: core version 0.5
[    0.173179] Time: 21:51:23  Date: 09/26/11
[    0.173179] NET: Registered protocol family 16
[    0.173179] Trying to unpack rootfs image as initramfs...
[    0.173179] EISA bus registered
[    0.173179] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.173179] ACPI: bus type pci registered
[    0.173179] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.173179] PCI: MCFG area at e0000000 reserved in E820
[    0.173179] PCI: Using MMCONFIG for extended config space
[    0.173179] PCI: Using configuration type 1 for base access
[    0.176079] bio: create slab <bio-0> at 0
[    0.177168] ACPI: EC: Look up EC in DSDT
[    0.178196] ACPI: Executed 1 blocks of module-level executable AML code
[    0.180300] ACPI: BIOS _OSI(Linux) query ignored
[    0.189809] ACPI: Interpreter enabled
[    0.189809] ACPI: (supports S0 S3 S4 S5)
[    0.189809] ACPI: Using IOAPIC for interrupt routing
[    0.228512] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.228815] ACPI: No dock devices found.
[    0.229286] _OSC invalid UUID
[    0.229288] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.229392] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.229395] pci 0000:00:01.0: PME# disabled
[    0.229491] pci 0000:00:1a.0: reg 20 io port: [0xe0e0-0xe0ff]
[    0.229583] pci 0000:00:1a.1: reg 20 io port: [0xe0c0-0xe0df]
[    0.229676] pci 0000:00:1a.2: reg 20 io port: [0xe0a0-0xe0bf]
[    0.229768] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd3e04c00-0xd3e04fff]
[    0.229835] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.229841] pci 0000:00:1a.7: PME# disabled
[    0.229897] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd3e00000-0xd3e03fff]
[    0.229956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.229961] pci 0000:00:1b.0: PME# disabled
[    0.230051] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.230055] pci 0000:00:1c.0: PME# disabled
[    0.230150] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.230154] pci 0000:00:1c.1: PME# disabled
[    0.230248] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.230252] pci 0000:00:1c.2: PME# disabled
[    0.230330] pci 0000:00:1d.0: reg 20 io port: [0xe080-0xe09f]
[    0.230423] pci 0000:00:1d.1: reg 20 io port: [0xe060-0xe07f]
[    0.230515] pci 0000:00:1d.2: reg 20 io port: [0xe040-0xe05f]
[    0.230608] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd3e04800-0xd3e04bff]
[    0.230675] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.230680] pci 0000:00:1d.7: PME# disabled
[    0.230936] pci 0000:00:1f.2: reg 10 io port: [0xe130-0xe137]
[    0.230944] pci 0000:00:1f.2: reg 14 io port: [0xe120-0xe123]
[    0.230951] pci 0000:00:1f.2: reg 18 io port: [0xe110-0xe117]
[    0.230959] pci 0000:00:1f.2: reg 1c io port: [0xe100-0xe103]
[    0.230967] pci 0000:00:1f.2: reg 20 io port: [0xe020-0xe03f]
[    0.230974] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd3e04000-0xd3e047ff]
[    0.231020] pci 0000:00:1f.2: PME# supported from D3hot
[    0.231025] pci 0000:00:1f.2: PME# disabled
[    0.231064] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd3e05000-0xd3e050ff]
[    0.231083] pci 0000:00:1f.3: reg 20 io port: [0xe000-0xe01f]
[    0.231144] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
[    0.231152] pci 0000:01:00.0: reg 14 io port: [0xd000-0xd0ff]
[    0.231159] pci 0000:01:00.0: reg 18 32bit mmio: [0xd0020000-0xd002ffff]
[    0.231183] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xd0000000-0xd001ffff]
[    0.231212] pci 0000:01:00.0: supports D1 D2
[    0.231272] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.231275] pci 0000:00:01.0: bridge 32bit mmio: [0xc0000000-0xd00fffff]
[    0.232294] pci 0000:02:00.0: reg 10 64bit mmio: [0xd2920000-0xd2923fff]
[    0.232347] pci 0000:02:00.0: reg 18 io port: [0xc000-0xc0ff]
[    0.232552] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xd2900000-0xd291ffff]
[    0.232878] pci 0000:02:00.0: supports D1 D2
[    0.232879] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.232905] pci 0000:02:00.0: PME# disabled
[    0.233055] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
[    0.233060] pci 0000:00:1c.0: bridge 32bit mmio: [0xd2900000-0xd3cfffff]
[    0.233126] pci 0000:00:1c.1: bridge io port: [0xb000-0xbfff]
[    0.233131] pci 0000:00:1c.1: bridge 32bit mmio: [0xd1500000-0xd28fffff]
[    0.233271] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0100000-0xd0101fff]
[    0.233396] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.233407] pci 0000:05:00.0: PME# disabled
[    0.233499] pci 0000:00:1c.2: bridge io port: [0xa000-0xafff]
[    0.233504] pci 0000:00:1c.2: bridge 32bit mmio: [0xd0100000-0xd14fffff]
[    0.233557] pci 0000:06:03.0: reg 10 32bit mmio: [0xd3d00000-0xd3d007ff]
[    0.233616] pci 0000:06:03.0: PME# supported from D0 D3hot D3cold
[    0.233620] pci 0000:06:03.0: PME# disabled
[    0.233661] pci 0000:06:03.1: reg 10 32bit mmio: [0xd3d00900-0xd3d009ff]
[    0.233719] pci 0000:06:03.1: supports D1 D2
[    0.233721] pci 0000:06:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.233725] pci 0000:06:03.1: PME# disabled
[    0.233768] pci 0000:06:03.2: reg 10 32bit mmio: [0xd3d00800-0xd3d008ff]
[    0.233826] pci 0000:06:03.2: supports D1 D2
[    0.233828] pci 0000:06:03.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.233833] pci 0000:06:03.2: PME# disabled
[    0.233899] pci 0000:00:1e.0: transparent bridge
[    0.233907] pci 0000:00:1e.0: bridge 32bit mmio: [0xd3d00000-0xd3dfffff]
[    0.233941] pci_bus 0000:00: on NUMA node 0
[    0.233948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.234126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.234196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.234245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.234307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.234368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.234634] _OSC invalid UUID
[    0.246665] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.246762] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[    0.246856] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.246950] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.247043] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.247136] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.247231] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.247324] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.247430] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.247434] vgaarb: loaded
[    0.247539] SCSI subsystem initialized
[    0.247618] libata version 3.00 loaded.
[    0.247680] usbcore: registered new interface driver usbfs
[    0.247690] usbcore: registered new interface driver hub
[    0.247715] usbcore: registered new device driver usb
[    0.247821] ACPI: WMI: Mapper loaded
[    0.247823] PCI: Using ACPI for IRQ routing
[    0.248092] NetLabel: Initializing
[    0.248094] NetLabel:  domain hash size = 128
[    0.248095] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.248106] NetLabel:  unlabeled traffic allowed by default
[    0.248133] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.248140] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.248144] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.252190] Switching to clocksource tsc
[    0.253805] AppArmor: AppArmor Filesystem Enabled
[    0.253817] pnp: PnP ACPI init
[    0.253827] ACPI: bus type pnp registered
[    0.268114] pnp: PnP ACPI: found 10 devices
[    0.268117] ACPI: ACPI bus type pnp unregistered
[    0.268121] PnPBIOS: Disabled by ACPI PNP
[    0.268139] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.268146] system 00:05: ioport range 0x680-0x69f has been reserved
[    0.268149] system 00:05: ioport range 0x1000-0x100f has been reserved
[    0.268152] system 00:05: ioport range 0x800-0x803 has been reserved
[    0.268154] system 00:05: ioport range 0x400-0x47f has been reserved
[    0.268157] system 00:05: ioport range 0x500-0x53f has been reserved
[    0.268159] system 00:05: ioport range 0x164e-0x164f has been reserved
[    0.268166] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.268169] system 00:09: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.268171] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.268174] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.268176] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[    0.268179] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.268181] system 00:09: iomem range 0xfeb00000-0xfeb03fff has been reserved
[    0.268184] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.302914] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.302918] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.302922] pci 0000:00:01.0:   MEM window: 0xc0000000-0xd00fffff
[    0.302925] pci 0000:00:01.0:   PREFETCH window: 0x000000d3f00000-0x000000d40fffff
[    0.302929] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.302932] pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
[    0.302938] pci 0000:00:1c.0:   MEM window: 0xd2900000-0xd3cfffff
[    0.302943] pci 0000:00:1c.0:   PREFETCH window: 0x000000d4100000-0x000000d42fffff
[    0.302951] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.302954] pci 0000:00:1c.1:   IO window: 0xb000-0xbfff
[    0.302960] pci 0000:00:1c.1:   MEM window: 0xd1500000-0xd28fffff
[    0.302965] pci 0000:00:1c.1:   PREFETCH window: 0x000000d4300000-0x000000d44fffff
[    0.302972] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[    0.302975] pci 0000:00:1c.2:   IO window: 0xa000-0xafff
[    0.302982] pci 0000:00:1c.2:   MEM window: 0xd0100000-0xd14fffff
[    0.302986] pci 0000:00:1c.2:   PREFETCH window: 0x000000d4500000-0x000000d46fffff
[    0.302994] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.302996] pci 0000:00:1e.0:   IO window: disabled
[    0.303002] pci 0000:00:1e.0:   MEM window: 0xd3d00000-0xd3dfffff
[    0.303006] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.303023]   alloc irq_desc for 16 on node -1
[    0.303025]   alloc kstat_irqs on node -1
[    0.303031] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.303035] pci 0000:00:01.0: setting latency timer to 64
[    0.303044]   alloc irq_desc for 17 on node -1
[    0.303045]   alloc kstat_irqs on node -1
[    0.303048] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.303053] pci 0000:00:1c.0: setting latency timer to 64
[    0.303063] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.303068] pci 0000:00:1c.1: setting latency timer to 64
[    0.303077]   alloc irq_desc for 18 on node -1
[    0.303078]   alloc kstat_irqs on node -1
[    0.303081] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.303086] pci 0000:00:1c.2: setting latency timer to 64
[    0.303094] pci 0000:00:1e.0: setting latency timer to 64
[    0.303098] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.303101] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.303103] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    0.303105] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xd00fffff]
[    0.303107] pci_bus 0000:01: resource 2 pref mem [0xd3f00000-0xd40fffff]
[    0.303110] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
[    0.303112] pci_bus 0000:02: resource 1 mem: [0xd2900000-0xd3cfffff]
[    0.303114] pci_bus 0000:02: resource 2 pref mem [0xd4100000-0xd42fffff]
[    0.303116] pci_bus 0000:03: resource 0 io:  [0xb000-0xbfff]
[    0.303118] pci_bus 0000:03: resource 1 mem: [0xd1500000-0xd28fffff]
[    0.303120] pci_bus 0000:03: resource 2 pref mem [0xd4300000-0xd44fffff]
[    0.303123] pci_bus 0000:05: resource 0 io:  [0xa000-0xafff]
[    0.303125] pci_bus 0000:05: resource 1 mem: [0xd0100000-0xd14fffff]
[    0.303127] pci_bus 0000:05: resource 2 pref mem [0xd4500000-0xd46fffff]
[    0.303130] pci_bus 0000:06: resource 1 mem: [0xd3d00000-0xd3dfffff]
[    0.303132] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[    0.303134] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.303167] NET: Registered protocol family 2
[    0.303259] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.303542] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.303931] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.304121] TCP: Hash tables configured (established 131072 bind 65536)
[    0.304123] TCP reno registered
[    0.304188] NET: Registered protocol family 1
[    0.304544] pci 0000:01:00.0: Boot video device
[    0.304705] cpufreq-nforce2: No nForce2 chipset.
[    0.304728] Scanning for low memory corruption every 60 seconds
[    0.304825] audit: initializing netlink socket (disabled)
[    0.304833] type=2000 audit(1317073883.303:1): initialized
[    0.313629] highmem bounce pool size: 64 pages
[    0.313633] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.314841] VFS: Disk quotas dquot_6.5.2
[    0.314892] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.315372] fuse init (API version 7.13)
[    0.315458] msgmni has been set to 1615
[    0.315633] alg: No test for stdrng (krng)
[    0.315679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.315682] io scheduler noop registered
[    0.315683] io scheduler anticipatory registered
[    0.315685] io scheduler deadline registered
[    0.315718] io scheduler cfq registered (default)
[    0.315842]   alloc irq_desc for 24 on node -1
[    0.315844]   alloc kstat_irqs on node -1
[    0.315851] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.315857] pcieport 0000:00:01.0: setting latency timer to 64
[    0.315975]   alloc irq_desc for 25 on node -1
[    0.315977]   alloc kstat_irqs on node -1
[    0.315985] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.315995] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.316137]   alloc irq_desc for 26 on node -1
[    0.316139]   alloc kstat_irqs on node -1
[    0.316147] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.316157] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.316298]   alloc irq_desc for 27 on node -1
[    0.316299]   alloc kstat_irqs on node -1
[    0.316307] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.316317] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.316409] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.316517] _OSC invalid UUID
[    0.316598] _OSC invalid UUID
[    0.316676] _OSC invalid UUID
[    0.316752] _OSC invalid UUID
[    0.316841] _OSC invalid UUID
[    0.316917] _OSC invalid UUID
[    0.316994] _OSC invalid UUID
[    0.317068] _OSC invalid UUID
[    0.317084] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.317869] ACPI: AC Adapter [ADP1] (on-line)
[    0.317931] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.318775] ACPI: Lid Switch [LID0]
[    0.318811] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.318818] ACPI: Power Button [PWRB]
[    0.319899] ACPI: SSDT bdee5c10 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.320447] ACPI: SSDT bdee3810 007A2 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.321855] Monitor-Mwait will be used to enter C-1 state
[    0.321880] Monitor-Mwait will be used to enter C-2 state
[    0.321885] Marking TSC unstable due to TSC halts in idle
[    0.321928] processor LNXCPU:00: registered as cooling_device0
[    0.322413] ACPI: SSDT bdee4d90 000FD (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.322756] ACPI: SSDT bdee2f90 00047 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.323106] Switching to clocksource hpet
[    0.324513] processor LNXCPU:01: registered as cooling_device1
[    0.345980] Freeing initrd memory: 7756k freed
[    0.347777] thermal LNXTHERM:01: registered as thermal_zone0
[    0.347793] ACPI: Thermal Zone [TZ00] (61 C)
[    0.348864] ACPI: Invalid active0 threshold
[    0.349650] thermal LNXTHERM:02: registered as thermal_zone1
[    0.349659] ACPI: Thermal Zone [TZ01] (61 C)
[    0.349820] isapnp: Scanning for PnP cards...
[    0.351066] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.352243] brd: module loaded
[    0.352635] loop: module loaded
[    0.352710] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.353085] Fixed MDIO Bus: probed
[    0.353115] PPP generic driver version 2.4.2
[    0.353145] tun: Universal TUN/TAP device driver, 1.6
[    0.353146] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.353217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.353239]   alloc irq_desc for 19 on node -1
[    0.353241]   alloc kstat_irqs on node -1
[    0.353247] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.353258] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.353261] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.353286] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.353320] ehci_hcd 0000:00:1a.7: debug port 1
[    0.357209] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.357223] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd3e04c00
[    0.372015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.372099] usb usb1: configuration #1 chosen from 1 choice
[    0.372122] hub 1-0:1.0: USB hub found
[    0.372129] hub 1-0:1.0: 6 ports detected
[    0.372183]   alloc irq_desc for 23 on node -1
[    0.372185]   alloc kstat_irqs on node -1
[    0.372190] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.372199] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.372202] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.372229] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.372258] ehci_hcd 0000:00:1d.7: debug port 1
[    0.376132] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.376179] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd3e04800
[    0.392046] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.392102] usb usb2: configuration #1 chosen from 1 choice
[    0.392123] hub 2-0:1.0: USB hub found
[    0.392129] hub 2-0:1.0: 6 ports detected
[    0.392180] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.392192] uhci_hcd: USB Universal Host Controller Interface driver
[    0.392209] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.392216] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.392219] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.392243] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.392277] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
[    0.392350] usb usb3: configuration #1 chosen from 1 choice
[    0.392371] hub 3-0:1.0: USB hub found
[    0.392377] hub 3-0:1.0: 2 ports detected
[    0.392419]   alloc irq_desc for 21 on node -1
[    0.392420]   alloc kstat_irqs on node -1
[    0.392424] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.392429] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.392433] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.392458] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.392489] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e0c0
[    0.392567] usb usb4: configuration #1 chosen from 1 choice
[    0.392589] hub 4-0:1.0: USB hub found
[    0.392596] hub 4-0:1.0: 2 ports detected
[    0.392633] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.392639] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.392642] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.392672] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.392697] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e0a0
[    0.392767] usb usb5: configuration #1 chosen from 1 choice
[    0.392793] hub 5-0:1.0: USB hub found
[    0.392798] hub 5-0:1.0: 2 ports detected
[    0.392837] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.392843] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.392846] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.392870] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.392893] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
[    0.392967] usb usb6: configuration #1 chosen from 1 choice
[    0.393023] hub 6-0:1.0: USB hub found
[    0.393029] hub 6-0:1.0: 2 ports detected
[    0.393067] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.393073] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.393076] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.393102] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.393126] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e060
[    0.393197] usb usb7: configuration #1 chosen from 1 choice
[    0.393218] hub 7-0:1.0: USB hub found
[    0.393223] hub 7-0:1.0: 2 ports detected
[    0.393261] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.393266] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.393269] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.393293] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.393323] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e040
[    0.393397] usb usb8: configuration #1 chosen from 1 choice
[    0.393418] hub 8-0:1.0: USB hub found
[    0.393423] hub 8-0:1.0: 2 ports detected
[    0.393503] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.398974] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.402388] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.402393] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.402414] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.402433] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.402450] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.402537] mice: PS/2 mouse device common for all mice
[    0.402641] rtc_cmos 00:06: RTC can wake from S4
[    0.402668] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.402697] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.402784] device-mapper: uevent: version 1.0.3
[    0.402862] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.402918] device-mapper: multipath: version 1.1.0 loaded
[    0.402920] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.403005] EISA: Probing bus 0 at eisa.0
[    0.403011] Cannot allocate resource for EISA slot 1
[    0.403037] EISA: Detected 0 cards.
[    0.403140] cpuidle: using governor ladder
[    0.403212] cpuidle: using governor menu
[    0.403554] TCP cubic registered
[    0.403679] NET: Registered protocol family 10
[    0.404405] NET: Registered protocol family 17
[    0.405787] Using IPI No-Shortcut mode
[    0.405841] PM: Resume from disk failed.
[    0.405852] registered taskstats version 1
[    0.406665]   Magic number: 11:540:905
[    0.406725] rtc_cmos 00:06: setting system clock to 2011-09-26 21:51:23 UTC (1317073883)
[    0.406727] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.406729] EDD information not available.
[    0.424518] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.704989] isapnp: No Plug & Play device found
[    0.921974] ACPI: Battery Slot [BAT0] (battery present)
[    0.937823] Freeing unused kernel memory: 684k freed
[    0.938187] Write protecting the kernel text: 4836k
[    0.938285] Write protecting the kernel read-only data: 1884k
[    0.952278] udev: starting version 151
[    1.020064] sky2 driver version 1.25
[    1.020147] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.020199] sky2 0000:02:00.0: setting latency timer to 64
[    1.020280] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[    1.020595] ahci 0000:00:1f.2: version 3.0
[    1.020606] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.020639]   alloc irq_desc for 28 on node -1
[    1.020640]   alloc kstat_irqs on node -1
[    1.020651] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    1.020717] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.020720] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    1.020724] ahci 0000:00:1f.2: setting latency timer to 64
[    1.021179]   alloc irq_desc for 29 on node -1
[    1.021180]   alloc kstat_irqs on node -1
[    1.021254] sky2 0000:02:00.0: irq 29 for MSI/MSI-X
[    1.022696] sky2 eth0: addr 00:1d:ba:aa:c1:27
[    1.047082] scsi0 : ahci
[    1.059114] scsi1 : ahci
[    1.059323] scsi2 : ahci
[    1.059812] scsi3 : ahci
[    1.059903] ata1: SATA max UDMA/133 abar m2048@0xd3e04000 port 0xd3e04100 irq 28
[    1.059906] ata2: SATA max UDMA/133 abar m2048@0xd3e04000 port 0xd3e04180 irq 28
[    1.059908] ata3: DUMMY
[    1.059909] ata4: DUMMY
[    1.061886] ohci1394 0000:06:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.118096] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[d3d00000-d3d007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    1.148095] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    1.283509] usb 1-2: configuration #1 chosen from 1 choice
[    1.380116] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.380143] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.381181] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.381584] ata1.00: ATA-8: Hitachi HTS543232L9SA00, FB4OC43C, max UDMA/133
[    1.381588] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.382831] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.382834] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.383261] ata1.00: configured for UDMA/133
[    1.391959] ata2.00: ATAPI: PIONEER DVD-RW  DVRTD08, 1.00, max UDMA/33
[    1.396137] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    1.396217] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
[    1.396338] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.396415] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.396452] sd 0:0:0:0: [sda] Write Protect is off
[    1.396455] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.396482] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.396586]  sda:
[    1.403831] ata2.00: configured for UDMA/33 (SET_XFERMODE skipped)
[    1.424897]  sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    1.471109] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.514135] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVRTD08  1.00 PQ: 0 ANSI: 5
[    1.533702] usb 2-1: configuration #1 chosen from 4 choices
[    1.638149] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.638154] Uniform CD-ROM driver Revision: 3.20
[    1.638258] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.638319] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.884024] usb 6-2: new full speed USB device using uhci_hcd and address 2
[    2.063999] usb 6-2: configuration #1 chosen from 1 choice
[    2.078590] usbcore: registered new interface driver hiddev
[    2.080121] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4
[    2.080198] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[    2.085057] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input5
[    2.085162] generic-usb 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[    2.085178] usbcore: registered new interface driver usbhid
[    2.085180] usbhid: v2.6:USB HID core driver
[    2.396876] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460302e67cd1]
[    2.420210] kjournald starting.  Commit interval 5 seconds
[    2.420236] EXT3-fs: mounted filesystem with ordered data mode.
[   23.011848] Adding 4610612k swap on /dev/sda7.  Priority:-1 extents:1 across:4610612k 
[   23.043432] udev: starting version 151
[   23.053830] lp: driver loaded but no devices found
[   23.126560] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[   23.216854] acpi device:19: registered as cooling_device2
[   23.216957] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/LNXVIDEO:01/input/input6
[   23.216996] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   23.226252] sony-laptop: Sony Notebook Control Driver v0.6.
[   23.228636] Linux agpgart interface v0.103
[   23.266719] sdhci: Secure Digital Host Controller Interface driver
[   23.266721] sdhci: Copyright(c) Pierre Ossman
[   23.267382] cfg80211: Calling CRDA to update world regulatory domain
[   23.267850] sdhci-pci 0000:06:03.1: SDHCI controller found [1180:0822] (rev 22)
[   23.267867] sdhci-pci 0000:06:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   23.267888] sdhci-pci 0000:06:03.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   23.267929] Registered led device: mmc0::
[   23.267956] mmc0: SDHCI controller on PCI [0000:06:03.1] using DMA
[   23.342308] cfg80211: World regulatory domain updated:
[   23.342311] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   23.342313] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.342316] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.342318] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.342320] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.342322] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.348780] Linux video capture interface: v2.00
[   23.365681] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b3)
[   23.365919] [drm] Initialized drm 1.1.0 20060810
[   23.369804] input: UVC Camera (05ca:18b3) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
[   23.369881] usbcore: registered new interface driver uvcvideo
[   23.370000] USB Video Class driver (v0.1.0)
[   23.422029] type=1505 audit(1317066706.513:2):  operation="profile_load" pid=663 name="/sbin/dhclient3"
[   23.422627] type=1505 audit(1317066706.513:3):  operation="profile_load" pid=663 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   23.422958] type=1505 audit(1317066706.513:4):  operation="profile_load" pid=663 name="/usr/lib/connman/scripts/dhclient-script"
[   23.425073] type=1505 audit(1317066706.517:5):  operation="profile_replace" pid=664 name="/sbin/dhclient3"
[   23.425680] type=1505 audit(1317066706.517:6):  operation="profile_replace" pid=664 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   23.426017] type=1505 audit(1317066706.517:7):  operation="profile_replace" pid=664 name="/usr/lib/connman/scripts/dhclient-script"
[   23.442630] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[   23.442633] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[   23.442932] iwlagn 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   23.442968] iwlagn 0000:05:00.0: setting latency timer to 64
[   23.443031] iwlagn 0000:05:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[   23.458045] [drm] radeon defaulting to kernel modesetting.
[   23.458048] [drm] radeon kernel modesetting enabled.
[   23.458099] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   23.458117] radeon 0000:01:00.0: setting latency timer to 64
[   23.459190] [drm] radeon: Initializing kernel modesetting.
[   23.459266] [drm] register mmio base: 0xD0020000
[   23.459268] [drm] register mmio size: 65536
[   23.459344] ATOM BIOS: SonyM790
[   23.459367] [drm] Clocks initialized !
[   23.460364] [drm] Detected VRAM RAM=256M, BAR=256M
[   23.460367] [drm] RAM width 64bits DDR
[   23.460576] [TTM] Zone  kernel: Available graphics memory: 417712 kiB.
[   23.460578] [TTM] Zone highmem: Available graphics memory: 2042514 kiB.
[   23.460592] [drm] radeon: 256M of VRAM memory ready
[   23.460594] [drm] radeon: 512M of GTT memory ready.
[   23.460699]   alloc irq_desc for 30 on node -1
[   23.460701]   alloc kstat_irqs on node -1
[   23.460730] radeon 0000:01:00.0: irq 30 for MSI/MSI-X
[   23.460743] radeon 0000:01:00.0: radeon: using MSI.
[   23.460804] [drm] radeon: irq initialized.
[   23.460807] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   23.461090] [drm] Loading RV620 Microcode
[   23.461093] platform radeon_cp.0: firmware: requesting radeon/RV620_pfp.bin
[   23.464211] platform radeon_cp.0: firmware: requesting radeon/RV620_me.bin

Codice: Seleziona tutto

[   23.466538] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[   23.490414] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input8
[   23.490486] input: Sony Vaio Jogdial as /devices/virtual/input/input9
[   23.490528] sony-laptop: brightness ignored, must be controlled by ACPI video driver
[   23.501431] iwlagn 0000:05:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[   23.501492]   alloc irq_desc for 31 on node -1
[   23.501494]   alloc kstat_irqs on node -1
[   23.501514] iwlagn 0000:05:00.0: irq 31 for MSI/MSI-X
[   23.504647] [drm] ring test succeeded in 1 usecs
[   23.505193] [drm] radeon: ib pool ready.
[   23.505267] [drm] ib test succeeded in 0 usecs
[   23.505269] [drm] Enabling audio support
[   23.505681] [drm] Radeon Display Connectors
[   23.505683] [drm] Connector 0:
[   23.505684] [drm]   VGA
[   23.505686] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   23.505688] [drm]   Encoders:
[   23.505689] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   23.505691] [drm] Connector 1:
[   23.505692] [drm]   LVDS
[   23.505693] [drm]   Encoders:
[   23.505694] [drm]     LCD1: INTERNAL_KLDSCP_LVTMA
[   23.541678] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   23.546566] [drm] fb mappable at 0xC0141000
[   23.546568] [drm] vram apper at 0xC0000000
[   23.546569] [drm] size 4096000
[   23.546571] [drm] fb depth is 24
[   23.546572] [drm]    pitch is 5120
[   23.546785] fb0: radeondrmfb frame buffer device
[   23.546786] registered panic notifier
[   23.546791] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[   23.552099]   alloc irq_desc for 22 on node -1
[   23.552102]   alloc kstat_irqs on node -1
[   23.552108] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   23.552137] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   23.554044] vga16fb: initializing
[   23.554046] vga16fb: mapped to 0xc00a0000
[   23.554049] vga16fb: not registering due to another framebuffer present
[   23.660102] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   24.078841] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000
[   24.124577] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
[   24.395244] EXT3 FS on sda3, internal journal
[   24.479824] Console: switching to colour frame buffer device 160x50
[   24.668529] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x020c0000
[   25.849894] kjournald starting.  Commit interval 5 seconds
[   25.850153] EXT3 FS on sda6, internal journal
[   25.850159] EXT3-fs: mounted filesystem with ordered data mode.
[   31.672596] type=1505 audit(1317066714.765:8):  operation="profile_replace" pid=919 name="/sbin/dhclient3"
[   31.673185] type=1505 audit(1317066714.765:9):  operation="profile_load" pid=918 name="/usr/share/gdm/guest-session/Xsession"
[   31.673202] type=1505 audit(1317066714.765:10):  operation="profile_replace" pid=919 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   31.673536] type=1505 audit(1317066714.765:11):  operation="profile_replace" pid=919 name="/usr/lib/connman/scripts/dhclient-script"
[   31.678628] type=1505 audit(1317066714.769:12):  operation="profile_load" pid=924 name="/usr/lib/cups/backend/cups-pdf"
[   31.680435] type=1505 audit(1317066714.773:13):  operation="profile_load" pid=924 name="/usr/sbin/cupsd"
[   31.681710] type=1505 audit(1317066714.773:14):  operation="profile_load" pid=921 name="/usr/bin/evince"
[   31.683189] type=1505 audit(1317066714.773:15):  operation="profile_load" pid=926 name="/usr/sbin/tcpdump"
[   31.690648] type=1505 audit(1317066714.781:16):  operation="profile_load" pid=921 name="/usr/bin/evince-previewer"
[   31.695438] type=1505 audit(1317066714.785:17):  operation="profile_load" pid=921 name="/usr/bin/evince-thumbnailer"
[   31.921369] sky2 eth0: enabling interface
[   31.921515] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.922366] iwlagn 0000:05:00.0: firmware: requesting iwlwifi-5000-2.ucode
[   31.924601] iwlagn 0000:05:00.0: loaded firmware version 8.24.2.12
[   32.068899] Registered led device: iwl-phy0::radio
[   32.069103] Registered led device: iwl-phy0::assoc
[   32.069149] Registered led device: iwl-phy0::RX
[   32.069460] Registered led device: iwl-phy0::TX
[   32.080423] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   34.161007] ppdev: user-space parallel port driver
[   34.742001] CPU0 attaching NULL sched-domain.
[   34.742006] CPU1 attaching NULL sched-domain.
[   34.760087] CPU0 attaching sched-domain:
[   34.760091]  domain 0: span 0-1 level MC
[   34.760093]   groups: 0 1
[   34.760098] CPU1 attaching sched-domain:
[   34.760100]  domain 0: span 0-1 level MC
[   34.760102]   groups: 1 0
[   36.475263] CPU0 attaching NULL sched-domain.
[   36.475268] CPU1 attaching NULL sched-domain.
[   36.492557] CPU0 attaching sched-domain:
[   36.492560]  domain 0: span 0-1 level MC
[   36.492562]   groups: 0 1
[   36.492566] CPU1 attaching sched-domain:
[   36.492568]  domain 0: span 0-1 level MC
[   36.492570]   groups: 1 0
[   43.394467] wlan0: deauthenticating from 00:18:4d:68:e0:b0 by local choice (reason=3)
[   43.394512] wlan0: direct probe to AP 00:18:4d:68:e0:b0 (try 1)
[   43.397998] wlan0: direct probe responded
[   43.398002] wlan0: authenticate with AP 00:18:4d:68:e0:b0 (try 1)
[   43.400211] wlan0: authenticated
[   43.400226] wlan0: associate with AP 00:18:4d:68:e0:b0 (try 1)
[   43.403141] wlan0: RX AssocResp from 00:18:4d:68:e0:b0 (capab=0x411 status=0 aid=2)
[   43.403144] wlan0: associated
[   43.404720] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   44.409157] padlock: VIA PadLock not detected.
[   53.556044] wlan0: no IPv6 routers present
[  246.229331] usb 2-1: USB disconnect, address 2
[  290.844065] usb 2-1: new high speed USB device using ehci_hcd and address 4
[  290.982595] usb 2-1: configuration #1 chosen from 4 choices
[ 1069.120517] usb 2-1: USB disconnect, address 4
[ 1073.599956] usb 2-1: new high speed USB device using ehci_hcd and address 5
[ 1073.735767] usb 2-1: configuration #1 chosen from 4 choices

Mdfalcubo ha scritto: Se vai in sistema>computer (o file system) non vedi l'icona dell'iphone? Se la vedi è montato, ti manca solo l'icona sul desktop.

Nulla.

Quando ti viene chiesto di postare il risultato di comandi da terminale (di solito molto lunghi) devi fare sempre così: copia il testo del terminale e incollalo qui, poi selezionalo tutto e premi sul simbolo del # che trovi qui in alto, sopra le faccine. Quello è "mettere tra i code/tag" e serve per rendere leggibile qualcosa che potrebbe risultare molto lungo.

Te li sistemo io, ma dalla prossima volta fai come detto sopra, grazie.

mount

Codice: Seleziona tutto

/dev/sda3 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
/dev/sda5 on /media/Dati type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
/dev/sda2 on /media/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
/dev/sda6 on /home type ext3 (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/englishman/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=englishman)

mount

Codice: Seleziona tutto

/dev/sda3 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
/dev/sda5 on /media/Dati type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
/dev/sda2 on /media/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
/dev/sda6 on /home type ext3 (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/englishman/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=englishman

)

Thank you so much so far for all of your suggestions and help. I wish I could use my beloved Iphone under Ubuntu!

E' un forum italiano, usa l'italiano se vuoi farti capire da tutti

Good night!

Ok, stai già lasciandomi?

Posto il risultato di lsusb, nel caso dovesse servire:

lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c52f Logitech, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 05ac:1292 Apple, Inc. iPhone 3G
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05ca:18b3 Ricoh Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Ho letto su un forum inglese che avrei dovuto assicurarmi che nella cartella /usr/local/lib non ci fossero files "libemobi", così ho provveduto a cancellare quelli presenti nella cartella. Senza risultato alcuno.

Nessuno che sappia aprirmi uno spiraglio o che abbia avuto lo stesso problema?
Vorrei almeno sapere se il fatto che il comando "ideviceinfo" restituisca qualcosa possa significare che comunque l'iphone sia riconosciuto dal sistema, in qualche modo letto, montato. Grazie.

gr1603 ha scritto: Posto il risultato di lsusb, nel caso dovesse servire:

lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c52f Logitech, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 05ac:1292 Apple, Inc. iPhone 3G
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05ca:18b3 Ricoh Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Come vedi, all'ottava riga l'iphone è rilevato.

Allora che cosa devo fare per poterne vedere l'icona, ed usarlo col lettore? Il problema è che non lo vedo anche se è rilevato.

Se provo questo:
sudo add-apt-repository ppa:pmcenery/ppa && sudo apt-get update && sudo apt-get dist-upgrade
mi restituisce i seguenti errori:

Codice: Seleziona tutto

Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv 3AE22276BF4F39C8D6117D7F4EA3A911D48B8E25
gpg: richiesta della chiave D48B8E25 dal server hkp keyserver.ubuntu.com
gpg: chiave D48B8E25: "Launchpad PPA for Paul McEnery" non cambiata
gpg: Numero totale esaminato: 1
gpg:              non modificate: 1
Trovato http://it.archive.ubuntu.com lucid Release.gpg
Trovato http://archive.canonical.com lucid Release.gpg                         
Ign http://archive.canonical.com/ubuntu/ lucid/partner Translation-it          
Trovato http://deb.opera.com stable Release.gpg                                
Ign http://deb.opera.com/opera/ stable/non-free Translation-it                 
Trovato http://it.archive.ubuntu.com/ubuntu/ lucid/main Translation-it         
Trovato http://security.ubuntu.com lucid-security Release.gpg                  
Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-it      
Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted Translation-it
Trovato http://archive.canonical.com lucid Release                             
Trovato http://it.archive.ubuntu.com/ubuntu/ lucid/restricted Translation-it   
Scaricare:1 http://dl.google.com stable Release.gpg [198B]                     
Trovato http://archive.canonical.com lucid/partner Packages                    
Trovato http://it.archive.ubuntu.com/ubuntu/ lucid/universe Translation-it     
Trovato http://archive.canonical.com lucid/partner Sources                     
Trovato http://deb.opera.com stable Release                                    
Ign http://deb.opera.com stable/non-free Packages                              
Ign http://security.ubuntu.com/ubuntu/ lucid-security/universe Translation-it  
Ign http://security.ubuntu.com/ubuntu/ lucid-security/multiverse Translation-it
Trovato http://security.ubuntu.com lucid-security Release                      
Ign http://deb.opera.com stable/non-free Packages                              
Trovato http://security.ubuntu.com lucid-security/main Packages                
Trovato http://deb.opera.com stable/non-free Packages                          
Trovato http://security.ubuntu.com lucid-security/restricted Packages          
Trovato http://security.ubuntu.com lucid-security/main Sources                 
Trovato http://security.ubuntu.com lucid-security/restricted Sources           
Trovato http://security.ubuntu.com lucid-security/universe Packages            
Trovato http://security.ubuntu.com lucid-security/universe Sources             
Trovato http://security.ubuntu.com lucid-security/multiverse Packages          
Trovato http://security.ubuntu.com lucid-security/multiverse Sources           
Scaricare:2 http://www.sciallo.net binary/ Release.gpg [807B]                  
Scaricare:3 http://www.sciallo.net/UbuntuRepo/myrepo/ binary/ Translation-it [807B]
97% [3 Translation-it bzip2 0B] [Connessione a it.archive.ubuntu.com (193.206.1bzip2: (stdin) is not a bzip2 file.
Ign http://www.sciallo.net/UbuntuRepo/myrepo/ binary/ Translation-it           
Ign http://dl.google.com/linux/chrome/deb/ stable/main Translation-it          
Scaricare:4 http://www.sciallo.net binary/ Release [807B]                      
Ign http://www.sciallo.net binary/ Release                                     
Scaricare:5 http://dl.google.com stable Release.gpg [198B]                     
Ign http://dl.google.com/linux/earth/deb/ stable/main Translation-it           
Scaricare:6 http://dl.google.com stable Release.gpg [198B]                     
Scaricare:7 http://www.sciallo.net binary/ Packages [807B]                     
78% [7 Packages bzip2 0B] [Connessione a it.archive.ubuntu.com (193.206.139.34)bzip2: (stdin) is not a bzip2 file.
Err http://www.sciallo.net binary/ Packages                                    
  Il sottoprocesso /bin/bzip2 ha restituito un codice d'errore (2)
Ign http://ppa.launchpad.net lucid Release.gpg                                 
Ign http://ppa.launchpad.net/jonabeck/ppa/ubuntu/ lucid/main Translation-it    
Trovato http://ppa.launchpad.net lucid Release.gpg                             
Ign http://ppa.launchpad.net/globalmenu-team/ppa/ubuntu/ lucid/main Translation-it
Trovato http://ppa.launchpad.net lucid Release.gpg                             
Ign http://ppa.launchpad.net/pmcenery/ppa/ubuntu/ lucid/main Translation-it    
Trovato http://ppa.launchpad.net lucid Release.gpg                             
Ign http://ppa.launchpad.net/tualatrix/ppa/ubuntu/ lucid/main Translation-it   
Trovato http://ppa.launchpad.net lucid Release.gpg                             
Ign http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu/ lucid/main Translation-it 
Ign http://ppa.launchpad.net lucid Release                                     
Trovato http://ppa.launchpad.net lucid Release                                 
Trovato http://ppa.launchpad.net lucid Release                                 
Trovato http://ppa.launchpad.net lucid Release                                 
Trovato http://ppa.launchpad.net lucid Release                                 
Ign http://ppa.launchpad.net lucid/main Packages                               
Ign http://ppa.launchpad.net lucid/main Sources                                
Trovato http://ppa.launchpad.net lucid/main Packages                           
Ign http://dl.google.com/linux/talkplugin/deb/ stable/main Translation-it      
Trovato http://it.archive.ubuntu.com/ubuntu/ lucid/multiverse Translation-it   
Trovato http://ppa.launchpad.net lucid/main Packages                           
Trovato http://ppa.launchpad.net lucid/main Packages                           
Trovato http://ppa.launchpad.net lucid/main Packages                           
Ign http://ppa.launchpad.net lucid/main Packages                               
Ign http://ppa.launchpad.net lucid/main Sources                                
Err http://ppa.launchpad.net lucid/main Packages                               
  404  Not Found
Err http://ppa.launchpad.net lucid/main Sources                                
  404  Not Found
Trovato http://it.archive.ubuntu.com lucid-updates Release.gpg                 
Ign http://it.archive.ubuntu.com/ubuntu/ lucid-updates/main Translation-it     
Ign http://it.archive.ubuntu.com/ubuntu/ lucid-updates/restricted Translation-it
Ign http://it.archive.ubuntu.com/ubuntu/ lucid-updates/universe Translation-it 
Ign http://it.archive.ubuntu.com/ubuntu/ lucid-updates/multiverse Translation-it
Trovato http://it.archive.ubuntu.com lucid-backports Release.gpg   
Ign http://it.archive.ubuntu.com/ubuntu/ lucid-backports/main Translation-it
Ign http://it.archive.ubuntu.com/ubuntu/ lucid-backports/restricted Translation-it
Trovato http://packages.medibuntu.org lucid Release.gpg            
Ign http://it.archive.ubuntu.com/ubuntu/ lucid-backports/universe Translation-it
Ign http://packages.medibuntu.org/ lucid/free Translation-it                   
Ign http://it.archive.ubuntu.com/ubuntu/ lucid-backports/multiverse Translation-it
Trovato http://it.archive.ubuntu.com lucid-proposed Release.gpg                
Ign http://packages.medibuntu.org/ lucid/non-free Translation-it               
Trovato http://it.archive.ubuntu.com/ubuntu/ lucid-proposed/restricted Translation-it
Trovato http://it.archive.ubuntu.com/ubuntu/ lucid-proposed/main Translation-it
Trovato http://packages.medibuntu.org lucid Release                            
Trovato http://it.archive.ubuntu.com/ubuntu/ lucid-proposed/multiverse Translation-it
Trovato http://packages.medibuntu.org lucid/free Packages                      
Scaricare:8 http://dl.google.com stable Release [1347B]                        
Trovato http://packages.medibuntu.org lucid/non-free Packages                  
Trovato http://it.archive.ubuntu.com/ubuntu/ lucid-proposed/universe Translation-it
Trovato http://it.archive.ubuntu.com lucid Release                             
Trovato http://it.archive.ubuntu.com lucid-updates Release                     
Trovato http://it.archive.ubuntu.com lucid-backports Release                   
Trovato http://it.archive.ubuntu.com lucid-proposed Release                    
Trovato http://it.archive.ubuntu.com lucid/main Packages                       
Scaricare:9 http://dl.google.com stable Release [1338B]                        
Scaricare:10 http://dl.google.com stable Release [1347B]                       
Trovato http://it.archive.ubuntu.com lucid/restricted Packages                 
Trovato http://it.archive.ubuntu.com lucid/main Sources                        
Trovato http://it.archive.ubuntu.com lucid/restricted Sources                  
Trovato http://it.archive.ubuntu.com lucid/universe Packages                   
Trovato http://it.archive.ubuntu.com lucid/universe Sources                    
Trovato http://it.archive.ubuntu.com lucid/multiverse Packages                 
Trovato http://it.archive.ubuntu.com lucid/multiverse Sources                  
Scaricare:11 http://dl.google.com stable/main Packages [1193B]                 
Trovato http://it.archive.ubuntu.com lucid-updates/main Packages               
Trovato http://it.archive.ubuntu.com lucid-updates/restricted Packages         
Trovato http://it.archive.ubuntu.com lucid-updates/main Sources                
Trovato http://it.archive.ubuntu.com lucid-updates/restricted Sources          
Trovato http://it.archive.ubuntu.com lucid-updates/universe Packages           
Trovato http://it.archive.ubuntu.com lucid-updates/universe Sources            
Trovato http://it.archive.ubuntu.com lucid-updates/multiverse Packages         
Trovato http://it.archive.ubuntu.com lucid-updates/multiverse Sources          
Trovato http://it.archive.ubuntu.com lucid-backports/main Packages             
Trovato http://it.archive.ubuntu.com lucid-backports/restricted Packages       
Trovato http://it.archive.ubuntu.com lucid-backports/universe Packages         
Trovato http://it.archive.ubuntu.com lucid-backports/multiverse Packages       
Trovato http://it.archive.ubuntu.com lucid-proposed/restricted Packages        
Trovato http://it.archive.ubuntu.com lucid-proposed/main Packages              
Trovato http://it.archive.ubuntu.com lucid-proposed/multiverse Packages        
Trovato http://it.archive.ubuntu.com lucid-proposed/universe Packages          
Scaricare:12 http://dl.google.com stable/main Packages [464B]                  
Scaricare:13 http://dl.google.com stable/main Packages [779B]                  
Recuperati 10,3kB in 12s (856B/s)                                              
W: Errore GPG: http://www.sciallo.net binary/ Release: Le seguenti firme non erano valide: NODATA 1 NODATA 2
W: Impossibile recuperare http://www.sciallo.net/UbuntuRepo/myrepo/binary/Packages.bz2  Il sottoprocesso /bin/bzip2 ha restituito un codice d'errore (2)

W: Impossibile recuperare http://ppa.launchpad.net/jonabeck/ppa/ubuntu/dists/lucid/main/binary-i386/Packages.gz  404  Not Found

W: Impossibile recuperare http://ppa.launchpad.net/jonabeck/ppa/ubuntu/dists/lucid/main/source/Sources.gz  404  Not Found

E: Impossibile scaricare alcuni file di indice: saranno ignorati o verranno usati quelli vecchi.

E a cosa dovrebbero servire quei repository? Consiglio personale: smetti di smanettare prima di fare casini e aspetta qualcuno che sappia come fare

Nel frattempo fai una ricerca nel forum, ci sono molto post che trattano lo stesso argomento (a volte, si risolve prima con la ricerca perchè da risultati subito verificabili, invece che aspettare che qualcuno che sa come risolvere veda il tuo post e ti risponda).

Forum Ubuntu-it

[Risolto] [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

[Risolto] [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -

Re: [Mount] Iphone 3G riconosciuto, comunica ma non è montato -