RISOLTO: Problema Scanner su Multifunzione Epson sx218
Inviato: venerdì 30 settembre 2011, 11:20
buongiorno a tutti,
uso ubuntu 11.04
ho istallato i driver per la stampante da http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do e funziona correttamente
per far funzionare lo scanner, come scritto chiaramente, e' necessario installare un secondo driver che ho scaricato selezionando il modello della mia stampante multifunzione.
che faccio ?
grazie,
ivano
uso ubuntu 11.04
ho istallato i driver per la stampante da http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do e funziona correttamente
per far funzionare lo scanner, come scritto chiaramente, e' necessario installare un secondo driver che ho scaricato selezionando il modello della mia stampante multifunzione.
Codice: Seleziona tutto
curealte@curealte-Tecra-A6:~$ sudo sane-find-scanner
[sudo] password for curealte:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8, product=0x0865) at libusb:003:022
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
curealte@curealte-Tecra-A6:~$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
grazie,
ivano