problema card reader interno

[ormo]

Apro un nuovo thread dato che il vecchio col tag risolto è gia caduto in terza pagina.
Ciao
Ho trovato e letto il thread dopo una ricerca su sangoogle
Ho il medesimo problema con un card reader interno "dynamode"
Cercando di ripetere la sequenza di comandi esploratuivi credo di aver capito che sto reader non viene granchè preso in considerazione dal sistema:

lspci restituisce:

Codice: Seleziona tutto

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation 2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.2 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 3 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation Device 1244 (rev a1)
01:00.1 Audio device: nVidia Corporation Device 0bee (rev a1)
03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
06:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
08:00.0 PCI bridge: Device 1b21:1080 (rev 01)
09:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
0a:00.0 SATA controller: Marvell Technology Group Ltd. Device 9172 (rev 11)

lsusb:

Codice: Seleziona tutto

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 0b05:179c ASUSTek Computer, Inc. 
Bus 002 Device 003: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0cf2:6230 ENE Technology, Inc. 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lsmod:

Codice: Seleziona tutto

Module                  Size  Used by
mmc_block              18053  0 
pci_stub               12622  1 
vboxpci                23190  0 
vboxnetadp             13382  0 
vboxnetflt             23435  0 
vboxdrv               286726  3 vboxpci,vboxnetadp,vboxnetflt
nls_iso8859_1          12713  0 
nls_cp437              16991  0 
vfat                   21708  0 
fat                    61374  1 vfat
binfmt_misc            17565  1 
dm_crypt               22993  0 
parport_pc             36959  0 
ppdev                  17113  0 
vesafb                 13761  1 
snd_hda_codec_hdmi     28167  4 
rfcomm                 47694  8 
snd_hda_codec_realtek   336771  1 
sco                    18187  2 
bnep                   18308  2 
l2cap                  53570  16 rfcomm,bnep
snd_hda_intel          33176  6 
snd_hda_codec         103804  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13604  1 snd_hda_codec
snd_seq_midi           13324  0 
snd_pcm                96391  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_rawmidi            30486  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
snd_seq                61621  2 snd_seq_midi,snd_seq_midi_event
snd_timer              29602  2 snd_pcm,snd_seq
snd_seq_device         14462  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    67382  21 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
lp                     17825  0 
nvidia              10709116  28 
btusb                  18600  2 
soundcore              12680  1 snd
bluetooth              72320  9 rfcomm,sco,bnep,l2cap,btusb
eeepc_wmi              19323  0 
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
parport                46458  3 parport_pc,ppdev,lp
sparse_keymap          13898  1 eeepc_wmi
usbhid                 46956  0 
hid                    91020  1 usbhid
usb_storage            53538  1 
uas                    17996  0 
firewire_ohci          40370  0 
firewire_core          62646  1 firewire_ohci
crc_itu_t              12707  1 firewire_core
xhci_hcd               77643  0 
r8169                  48022  0 
ahci                   25951  5 
libahci                26642  1 ahci

non vedo nulla io o sbaglio qualcosa?
La periferica è connessa con il connettore usb interno alla mobo.
Quando inserisco una pendrive usb nel pannello di questo card reader essa viene montata automaticamente e accedo RW
quando inserisco una sd apparentemente non fa nulla ma:

nell'imediato dmesg:

Codice: Seleziona tutto

[69092.714523] sde: detected capacity change from 4030726144 to 0
[69094.831610] sd 8:0:0:3: [sde] 7872512 512-byte logical blocks: (4.03 GB/3.75 GiB)
[69094.832071] sd 8:0:0:3: [sde] Assuming drive cache: write through
[69094.833223] sd 8:0:0:3: [sde] Assuming drive cache: write through

dopo 5 minuti accoda:

Codice: Seleziona tutto

[69274.717142] sd 8:0:0:3: timing out command, waited 180s
[69274.717152] sd 8:0:0:3: [sde] Unhandled sense code
[69274.717155] sd 8:0:0:3: [sde]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[69274.717158] sd 8:0:0:3: [sde]  Sense Key : Hardware Error [current] 
[69274.717163] sd 8:0:0:3: [sde]  Add. Sense: Unrecovered read error
[69274.717167] sd 8:0:0:3: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[69274.717176] end_request: I/O error, dev sde, sector 0
[69274.717180] quiet_error: 1 callbacks suppressed
[69274.717183] Buffer I/O error on device sde, logical block 0
[69454.593033] sd 8:0:0:3: timing out command, waited 180s
[69454.593043] sd 8:0:0:3: [sde] Unhandled sense code
[69454.593045] sd 8:0:0:3: [sde]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[69454.593049] sd 8:0:0:3: [sde]  Sense Key : Hardware Error [current] 
[69454.593054] sd 8:0:0:3: [sde]  Add. Sense: Unrecovered read error
[69454.593058] sd 8:0:0:3: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[69454.593067] end_request: I/O error, dev sde, sector 0
[69454.593071] Buffer I/O error on device sde, logical block 0

stessa cosa con una transflash oppure quando pluggo una nikon D40, con sd inserita, tramite connessione usb.
la macchina viene riconosciuta ma poi i soliti hardware error.
che ne pensate?

[magozurlinux]

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 0b05:179c ASUSTek Computer, Inc.
Bus 002 Device 003: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0cf2:6230 ENE Technology, Inc.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

quello evidenziato in rosso è il tuo card reader interno.

Un utente a cui ho risolto il problema del card reader; il suo era su scheda PCI e non usb.

Prova così:

da terminale dai questo comando:

Codice: Seleziona tutto

sudo modprobe pciehp pciehp_force=1

inserisci una SD nel lettore per vedere se la legge correttamente.

[ormo]

Niente da fare, non monta
dmesg:

Codice: Seleziona tutto

[318617.936439] sd 8:0:0:3: [sde] 7872512 512-byte logical blocks: (4.03 GB/3.75 GiB)
[318617.937047] sd 8:0:0:3: [sde] Assuming drive cache: write through
[318617.938147] sd 8:0:0:3: [sde] Assuming drive cache: write through
[318797.806448] sd 8:0:0:3: timing out command, waited 180s
[318797.806459] sd 8:0:0:3: [sde] Unhandled sense code
[318797.806461] sd 8:0:0:3: [sde]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[318797.806465] sd 8:0:0:3: [sde]  Sense Key : Hardware Error [current] 
[318797.806470] sd 8:0:0:3: [sde]  Add. Sense: Unrecovered read error
[318797.806474] sd 8:0:0:3: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[318797.806483] end_request: I/O error, dev sde, sector 0
[318797.806487] quiet_error: 154 callbacks suppressed
[318797.806490] Buffer I/O error on device sde, logical block 0

per curiosità come hai fatto ad individuare l'hardware?

A prescindere, girovagando sono arrivato qui:
http://hardware4linux.info/manufacturer/1281/65/
e poi qui:
http://cateee.net/lkddb/web-lkddb/USB_ENESTORAGE.html

Mi pare di aver capito che devo compilare se non il solo driver devo mettere mani al kernel?

[magozurlinux]

Altrimenti che mago sarei! 

basta immettere sul motore di ricerca VendorID e ProductID (0cf2:6230) e ti dice a quale dispositivo si riferisce, oppure puoi dare questo comando da terminale:

Codice: Seleziona tutto

sudo lsusb -v -d 0cf2:6230

[magozurlinux]

Da terminale col card reader inserito postami questo comando:

Codice: Seleziona tutto

ls /sys/class/block

forse con una regola udev è possibile forzare il funzionamento del tuo card reader; però non ti garantisco che funziona, perchè mi sto cimentando ora a provare delle regole udev.

Ciao

[ormo]

ls:

Codice: Seleziona tutto

ormo@dabox:~$ ls /sys/class/block
loop0  loop3  loop6  ram1   ram12  ram15  ram4  ram7  sda   sda5  sda8  sdd
loop1  loop4  loop7  ram10  ram13  ram2   ram5  ram8  sda1  sda6  sdb   sde
loop2  loop5  ram0   ram11  ram14  ram3   ram6  ram9  sda2  sda7  sdc   sr0

ho trovato qualcosa riguardante il card reader, lo pasto pure qui:
http://hardware4linux.info/manufacturer/1281/65/
http://cateee.net/lkddb/web-lkddb/USB_ENESTORAGE.html
nel secondo link ci sono un paio di link a dei .c
da compilare... e poi come caricare?...se non sto dicendo baggianate.
cmq grazie dello sbattimento.

[magozurlinux]

Prego, di nulla.

da terminale dai questo comando:

Codice: Seleziona tutto

sudo modprobe tifm_sd

inserisci una SD nel lettore di schedine, vedi se visualizza il contenuto.

Da terminale con la SD inserita postami questi comandi:

Codice: Seleziona tutto

dmesg | grep sd*

Codice: Seleziona tutto

sudo fdisk -l

[ormo]

fdisk

Codice: Seleziona tutto

Disco /dev/sda: 1000.2 GB, 1000204886016 byte
255 testine, 63 settori/tracce, 121601 cilindri
Unità = cilindri di 16065 * 512 = 8225280 byte
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificativo disco: 0x0002dd94

Dispositivo Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1       30401   244189184   83  Linux
/dev/sda2           30401      121602   732570625    5  Esteso
/dev/sda5           30401       32370    15819776   82  Linux swap / Solaris
/dev/sda6           32371       62765   244140032   83  Linux
/dev/sda7           62765       72977    82030592   83  Linux
/dev/sda8           72977      121602   390577152   83  Linux

ma resta appeso fino a quando non estraggo la scheda...

dmesg

Codice: Seleziona tutto

[400981.447711] sde: detected capacity change from 4030726144 to 0
[401103.486170] sd 8:0:0:3: [sde] 7872512 512-byte logical blocks: (4.03 GB/3.75 GiB)
[401103.486771] sd 8:0:0:3: [sde] Assuming drive cache: write through
[401103.487866] sd 8:0:0:3: [sde] Assuming drive cache: write through
[401283.356179] sd 8:0:0:3: timing out command, waited 180s
[401283.356188] sd 8:0:0:3: [sde] Unhandled sense code
[401283.356191] sd 8:0:0:3: [sde]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[401283.356195] sd 8:0:0:3: [sde]  Sense Key : Hardware Error [current] 
[401283.356199] sd 8:0:0:3: [sde]  Add. Sense: Unrecovered read error
[401283.356204] sd 8:0:0:3: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[401283.356213] end_request: I/O error, dev sde, sector 0
[401283.356216] quiet_error: 5 callbacks suppressed
[401283.356219] Buffer I/O error on device sde, logical block 0
[401463.232092] sd 8:0:0:3: timing out command, waited 180s
[401463.232101] sd 8:0:0:3: [sde] Unhandled sense code
[401463.232104] sd 8:0:0:3: [sde]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[401463.232108] sd 8:0:0:3: [sde]  Sense Key : Hardware Error [current] 
[401463.232112] sd 8:0:0:3: [sde]  Add. Sense: Unrecovered read error
[401463.232117] sd 8:0:0:3: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[401463.232126] end_request: I/O error, dev sde, sector 0
[401463.232129] Buffer I/O error on device sde, logical block 0

al solito, riconoscimento della capacità, dall'inserimento ai 3 minuti di timeout poi i/o error.

[magozurlinux]

Proviamo a scrivere una regola udev.

ormo@dabox:~$ ls /sys/class/block
loop0  loop3  loop6  ram1  ram12  ram15  ram4  ram7  sda  sda5  sda8  sdd
loop1  loop4  loop7  ram10  ram13  ram2  ram5  ram8  sda1  sda6  sdb  sde
loop2  loop5  ram0  ram11  ram14  ram3  ram6  ram9  sda2  sda7  sdc  sr0

[400981.447711] sde: detected capacity change from 4030726144 to 0
[401103.486170] sd 8:0:0:3: [sde] 7872512 512-byte logical blocks: (4.03 GB/3.75 GiB)
[401103.486771] sd 8:0:0:3: [sde] Assuming drive cache: write through
[401103.487866] sd 8:0:0:3: [sde] Assuming drive cache: write through
[401283.356179] sd 8:0:0:3: timing out command, waited 180s
[401283.356188] sd 8:0:0:3: [sde] Unhandled sense code
[401283.356191] sd 8:0:0:3: [sde]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[401283.356195] sd 8:0:0:3: [sde]  Sense Key : Hardware Error [current]
[401283.356199] sd 8:0:0:3: [sde]  Add. Sense: Unrecovered read error
[401283.356204] sd 8:0:0:3: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[401283.356213] end_request: I/O error, dev sde, sector 0
[401283.356216] quiet_error: 5 callbacks suppressed
[401283.356219] Buffer I/O error on device sde, logical block 0
[401463.232092] sd 8:0:0:3: timing out command, waited 180s
[401463.232101] sd 8:0:0:3: [sde] Unhandled sense code
[401463.232104] sd 8:0:0:3: [sde]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[401463.232108] sd 8:0:0:3: [sde]  Sense Key : Hardware Error [current]
[401463.232112] sd 8:0:0:3: [sde]  Add. Sense: Unrecovered read error
[401463.232117] sd 8:0:0:3: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[401463.232126] end_request: I/O error, dev sde, sector 0
[401463.232129] Buffer I/O error on device sde, logical block 0

Da terminale postami questo comando colla scheda SD inserita

Codice: Seleziona tutto

udevadm info -a -p /sys/class/block/sde

oppure se non dovesse visualizzare nulla, postami questo:

Codice: Seleziona tutto

udevadm info -a -p /sys/class/block/sd

[ormo]

Rieccheme!

sudo udevadm info -a -p /sys/class/block/sde:

Codice: Seleziona tutto

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/host8/target8:0:0/8:0:0:3/block/sde':
    KERNEL=="sde"
    SUBSYSTEM=="block"
    DRIVER==""
    ATTR{range}=="16"
    ATTR{ext_range}=="256"
    ATTR{removable}=="1"
    ATTR{ro}=="0"
    ATTR{size}=="7872512"
    ATTR{alignment_offset}=="0"
    ATTR{discard_alignment}=="0"
    ATTR{capability}=="51"
    ATTR{stat}=="       1        0        8   180010        0        0        0        0        1   185340   185340"
    ATTR{inflight}=="       1        0"
    ATTR{events}=="media_change"
    ATTR{events_async}==""
    ATTR{events_poll_msecs}=="-1"

  looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/host8/target8:0:0/8:0:0:3':
    KERNELS=="8:0:0:3"
    SUBSYSTEMS=="scsi"
    DRIVERS=="sd"
    ATTRS{device_blocked}=="1"
    ATTRS{type}=="0"
    ATTRS{scsi_level}=="0"
    ATTRS{vendor}=="USB2.0  "
    ATTRS{model}=="CardReader SD   "
    ATTRS{rev}=="0100"
    ATTRS{state}=="running"
    ATTRS{timeout}=="30"
    ATTRS{iocounterbits}=="32"
    ATTRS{iorequest_cnt}=="0x63d8"
    ATTRS{iodone_cnt}=="0x63d8"
    ATTRS{ioerr_cnt}=="0x63d0"
    ATTRS{evt_media_change}=="0"
    ATTRS{dh_state}=="detached"
    ATTRS{queue_depth}=="1"
    ATTRS{queue_type}=="none"
    ATTRS{max_sectors}=="240"

  looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/host8/target8:0:0':
    KERNELS=="target8:0:0"
    SUBSYSTEMS=="scsi"
    DRIVERS==""

  looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/host8':
    KERNELS=="host8"
    SUBSYSTEMS=="scsi"
    DRIVERS==""

  looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0':
    KERNELS=="1-1.4:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb-storage"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="08"
    ATTRS{bInterfaceSubClass}=="06"
    ATTRS{bInterfaceProtocol}=="50"
    ATTRS{supports_autosuspend}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4':
    KERNELS=="1-1.4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="80"
    ATTRS{bMaxPower}=="498mA"
    ATTRS{urbnum}=="391130"
    ATTRS{idVendor}=="0cf2"
    ATTRS{idProduct}=="6230"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="3"
    ATTRS{devpath}=="1.4"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="ENE Flash  "
    ATTRS{product}=="UB623X       "
    ATTRS{serial}=="606569746801"

  looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1/1-1':
    KERNELS=="1-1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="149"
    ATTRS{idVendor}=="8087"
    ATTRS{idProduct}=="0024"
    ATTRS{bcdDevice}=="0000"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="01"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="2"
    ATTRS{devpath}=="1"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="6"
    ATTRS{quirks}=="0x0"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{authorized}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:1a.0/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="24"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0002"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{devpath}=="0"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="2"
    ATTRS{quirks}=="0x0"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.38-11-generic ehci_hcd"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{serial}=="0000:00:1a.0"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:1a.0':
    KERNELS=="0000:00:1a.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{vendor}=="0x8086"
    ATTRS{device}=="0x1c2d"
    ATTRS{subsystem_vendor}=="0x1043"
    ATTRS{subsystem_device}=="0x844d"
    ATTRS{class}=="0x0c0320"
    ATTRS{irq}=="23"
    ATTRS{local_cpus}=="00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000f"
    ATTRS{local_cpulist}=="0-3"
    ATTRS{numa_node}=="-1"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""
    ATTRS{companion}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

sudo udevadm info -a -p /sys/class/block/sd
non ritorna nulla.

[magozurlinux]

Da terminale dai questo comando:

Codice: Seleziona tutto

sudo gedit /etc/udev/rules.d/15-cardreader.rules

copia ed incolla queste righe:

Codice: Seleziona tutto

KERNEL="sd*", SUBSYSTEMS=="scsi", ATTRS{model}=="CardReader SD   ", SYMLINK+="cfrdr%n", OPTIONS+="all_partitions"

salva ed esci dall'editor di testo.

Da terminale dai questo comando:

Codice: Seleziona tutto

sudo service udev restart 

Riavvia il pc.

[ormo]

Purtroppo non è cambiato nulla, devo dare qualche permesso di avvio alla regola? tipo 755

[magozurlinux]

No, non devi dare il permesso 755.

Facciamo quest'altra prova; da terminale dai questo comando:

Codice: Seleziona tutto

sudo gedit /etc/udev/rules.d/15-cardreader.rules

cancella il contenuto ed incolla questo:

Codice: Seleziona tutto

KERNEL=="sd6", SUBSYSTEMS=="block", ", ATTRS{model}=="CardReader SD   ", NAME{all_partitions}="card-sd", group=plugdev
KERNEL=="sd6", SUBSYSTEMS=="block", ", ATTRS{model}=="CardReader SD   ", NAME{all_partitions}="card-sd", group=plugdev
KERNEL=="sd6", SUBSYSTEMS=="block", ", ENV{ID_MODEL}=="CardReader SD   ", NAME{all_partitions}="card-sd", group=plugdev

salva ed esci dall'editor di testo.

Da terminale dai questo comando:

Codice: Seleziona tutto

sudo service udev restart

Riavvia il pc.

[ormo]

Nemmeno con questa regola mi legge la carta, sempre i soliti hardware error come sopra riportato.
Proverò a cambiare il connettore sulla scheda madre, se non ricordo male avevo altri punti dove collegare... magari che ne so gli piace di più.
Comincio a vagliare pure il campo del culo...
Comunque ti ringrazio ancora una volta.

[magozurlinux]

Prego, di nulla.

Proviamo a cambiare numerazione alla regola udev per vedere se così funziona.

Da terminale dai questo comando:

Codice: Seleziona tutto

sudo mv /etc/udev/rules.d/15-cardreader.rules  /etc/udev/rules.d/59-cardreader.rules

da terminale dai questo comando:

Codice: Seleziona tutto

sudo service udev restart

Riavvia il pc.

[ormo]

Ancora n on ci siamo però.
Ho variato un po' la cosa in questo senso
ho sostituito sd6 con sde nlle righe della regola udev.
o non ci ho mai fatto caso io oppure è una novità questa che dopo il timeout di 180 secondi avevo un output in dmesg ora mi sta sembrando nuovo
dmesg dall'inserimento fino al timeout

Codice: Seleziona tutto

[   42.269068] sd 8:0:0:3: [sde] 7872512 512-byte logical blocks: (4.03 GB/3.75 GiB)
[   42.269554] sd 8:0:0:3: [sde] Assuming drive cache: write through
[   42.270675] sd 8:0:0:3: [sde] Assuming drive cache: write through
[  222.150979] sd 8:0:0:3: timing out command, waited 180s
[  222.150995] sd 8:0:0:3: [sde] Unhandled sense code
[  222.150997] sd 8:0:0:3: [sde]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  222.151000] sd 8:0:0:3: [sde]  Sense Key : Hardware Error [current] 
[  222.151003] sd 8:0:0:3: [sde]  Add. Sense: Unrecovered read error
[  222.151007] sd 8:0:0:3: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  222.151014] end_request: I/O error, dev sde, sector 0
[  222.151017] quiet_error: 18 callbacks suppressed
[  222.151019] Buffer I/O error on device sde, logical block 0
[  241.175870] INFO: task blkid:1823 blocked for more than 120 seconds.
[  241.175873] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  241.175876] blkid           D 0000000000000002     0  1823      1 0x00000000
[  241.175880]  ffff8801d8eb5b48 0000000000000086 ffff8801d8eb5fd8 ffff8801d8eb4000
[  241.175884]  0000000000013d00 ffff8801f67f3178 ffff8801d8eb5fd8 0000000000013d00
[  241.175888]  ffff88020ed2db80 ffff8801f67f2dc0 0000000000800040 ffff88020ba816e0
[  241.175891] Call Trace:
[  241.175899]  [<ffffffff815c2397>] __mutex_lock_slowpath+0xf7/0x180
[  241.175903]  [<ffffffff815c1deb>] mutex_lock+0x2b/0x50
[  241.175916]  [<ffffffff81199720>] __blkdev_get+0x50/0x3e0
[  241.175920]  [<ffffffff81199b11>] blkdev_get+0x61/0x2c0
[  241.175924]  [<ffffffff815c365e>] ? _raw_spin_lock+0xe/0x20
[  241.175928]  [<ffffffff81199d70>] ? blkdev_open+0x0/0x80
[  241.175931]  [<ffffffff81199dd5>] blkdev_open+0x65/0x80
[  241.175936]  [<ffffffff81162d2e>] __dentry_open+0xce/0x2f0
[  241.175940]  [<ffffffff8116ef73>] ? generic_permission+0x23/0xc0
[  241.175944]  [<ffffffff81164221>] nameidata_to_filp+0x71/0x80
[  241.175949]  [<ffffffff81173428>] finish_open+0xc8/0x1b0
[  241.175952]  [<ffffffff81172617>] ? do_path_lookup+0x87/0x160
[  241.175956]  [<ffffffff81173be8>] do_filp_open+0x2c8/0x7c0
[  241.175962]  [<ffffffff812e6e47>] ? __strncpy_from_user+0x27/0x60
[  241.175967]  [<ffffffff81180f17>] ? alloc_fd+0xf7/0x150
[  241.175970]  [<ffffffff8116429a>] do_sys_open+0x6a/0x150
[  241.175974]  [<ffffffff811643a0>] sys_open+0x20/0x30
[  241.175978]  [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b

Ancora una cosa che prima non avevo notato per via della non repentinità a fare un dmesg al boot, quindi una volta riavviata la macchina ho notato questo in dmesg:

Codice: Seleziona tutto

[    3.553781] scsi 8:0:0:0: Direct-Access     USB2.0   CardReader CF    0100 PQ: 0 ANSI: 0
[    3.554268] scsi 8:0:0:1: Direct-Access     USB2.0   CardReader SM XD 0100 PQ: 0 ANSI: 0
[    3.554757] scsi 8:0:0:2: Direct-Access     USB2.0   CardReader MS    0100 PQ: 0 ANSI: 0
[    3.555256] scsi 8:0:0:3: Direct-Access     USB2.0   CardReader SD    0100 PQ: 0 ANSI: 0
[    3.555528] sd 8:0:0:0: Attached scsi generic sg2 type 0
[    3.555597] sd 8:0:0:1: Attached scsi generic sg3 type 0
[    3.555660] sd 8:0:0:2: Attached scsi generic sg4 type 0
[    3.555723] sd 8:0:0:3: Attached scsi generic sg5 type 0
[    3.563123] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[    3.564015] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[    3.564869] sd 8:0:0:2: [sdd] Attached SCSI removable disk
[    3.565744] sd 8:0:0:3: [sde] Attached SCSI removable disk

Forse può tornare utile?
Edit:
ho virtualizzato con oracle virtualbox una macchina win7, ho aggiunto alle periferiche usb (perchè li virtualbox lo piazza) questo famoso "ENE Flash UB623X [0100]" e mi legge la cartina tranquillamente.
forse è pure cambiato qualcosa in dmesg ma è passato troppo tempo, dovrei riavviare e fare tutto in fretta.
intanto mi salvo le foto della carta.........

[magozurlinux]

Nel modo di correggere la regola udev per errore ho digitato 6 anzichè e; quindi ora come rileva il card reader?

Da terminale postami questo comando:

Codice: Seleziona tutto

dmesg | grep sde

[ormo]

dmesg greppato:

Codice: Seleziona tutto

ormo@dabox:~$ dmesg |grep sde
[    3.544799] sd 8:0:0:3: [sde] Attached SCSI removable disk
ormo@dabox:~$ 

in dmesg tra le prime righe:

Codice: Seleziona tutto

[    2.812628] usb 2-1.7: new full speed USB device using ehci_hcd and address 4
[    3.532828] scsi 8:0:0:0: Direct-Access     USB2.0   CardReader CF    0100 PQ: 0 ANSI: 0
[    3.533305] scsi 8:0:0:1: Direct-Access     USB2.0   CardReader SM XD 0100 PQ: 0 ANSI: 0
[    3.533812] scsi 8:0:0:2: Direct-Access     USB2.0   CardReader MS    0100 PQ: 0 ANSI: 0
[    3.534437] scsi 8:0:0:3: Direct-Access     USB2.0   CardReader SD    0100 PQ: 0 ANSI: 0
[    3.534718] sd 8:0:0:0: Attached scsi generic sg2 type 0
[    3.534790] sd 8:0:0:1: Attached scsi generic sg3 type 0
[    3.534854] sd 8:0:0:2: Attached scsi generic sg4 type 0
[    3.534916] sd 8:0:0:3: Attached scsi generic sg5 type 0
[    3.542169] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[    3.543058] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[    3.543932] sd 8:0:0:2: [sdd] Attached SCSI removable disk
[    3.544799] sd 8:0:0:3: [sde] Attached SCSI removable disk
[   11.346624] <30>udev[361]: starting version 167
[   11.356758] lp: driver loaded but no devices found

Le ultime due righe riguardano il nostro amico card reader secondo te/voi?
comunque allo stato attuale con la regola così composta:

Codice: Seleziona tutto

KERNEL=="sde", SUBSYSTEMS=="block", ", ATTRS{model}=="CardReader SD   ", NAME{all_partitions}="card-sd", group=plugdev
KERNEL=="sde", SUBSYSTEMS=="block", ", ATTRS{model}=="CardReader SD   ", NAME{all_partitions}="card-sd", group=plugdev
KERNEL=="sde", SUBSYSTEMS=="block", ", ENV{ID_MODEL}=="CardReader SD   ", NAME{all_partitions}="card-sd", group=plugdev

il contenuto della carta non viene letto ed in dmesg ho:

Codice: Seleziona tutto

[  445.063062] sd 8:0:0:3: [sde] 7872512 512-byte logical blocks: (4.03 GB/3.75 GiB)
[  445.063603] sd 8:0:0:3: [sde] Assuming drive cache: write through
[  445.065085] sd 8:0:0:3: [sde] Assuming drive cache: write through

al timeout:

Codice: Seleziona tutto

[  600.896988] INFO: task udisks-daemon:1559 blocked for more than 120 seconds.
[  600.896991] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  600.896995] udisks-daemon   D 0000000000000003     0  1559   1558 0x00000000
[  600.897000]  ffff8801f4feb8f8 0000000000000086 ffff8801f4febfd8 ffff8801f4fea000
[  600.897004]  0000000000013d00 ffff88020a3903b8 ffff8801f4febfd8 0000000000013d00
[  600.897009]  ffff88020ed444a0 ffff88020a390000 ffff8800def918e8 ffff8800ded93d00
[  600.897013] Call Trace:
[  600.897023]  [<ffffffff8110c0f0>] ? sync_page+0x0/0x50
[  600.897029]  [<ffffffff815c1320>] io_schedule+0x70/0xc0
[  600.897033]  [<ffffffff8110c130>] sync_page+0x40/0x50
[  600.897038]  [<ffffffff815c1b4a>] __wait_on_bit_lock+0x5a/0xc0
[  600.897042]  [<ffffffff8110c0c7>] __lock_page+0x67/0x70
[  600.897048]  [<ffffffff81087ff0>] ? wake_bit_function+0x0/0x50
[  600.897053]  [<ffffffff81198b28>] ? blkdev_readpage+0x18/0x20
[  600.897057]  [<ffffffff8110cd87>] do_read_cache_page+0x157/0x180
[  600.897061]  [<ffffffff81198b10>] ? blkdev_readpage+0x0/0x20
[  600.897065]  [<ffffffff8110cdf9>] read_cache_page_async+0x19/0x20
[  600.897069]  [<ffffffff8110ce0e>] read_cache_page+0xe/0x20
[  600.897074]  [<ffffffff811cbf00>] read_dev_sector+0x30/0xa0
[  600.897079]  [<ffffffff811cd01a>] adfspart_check_ICS+0x7a/0x2a0
[  600.897084]  [<ffffffff812e5604>] ? snprintf+0x34/0x40
[  600.897088]  [<ffffffff811ccfa0>] ? adfspart_check_ICS+0x0/0x2a0
[  600.897093]  [<ffffffff811cc61c>] check_partition+0xfc/0x210
[  600.897097]  [<ffffffff811ccd6a>] rescan_partitions+0xda/0x310
[  600.897102]  [<ffffffff813f0d54>] ? sd_open+0x174/0x1f0
[  600.897106]  [<ffffffff8119998a>] __blkdev_get+0x2ba/0x3e0
[  600.897110]  [<ffffffff81199b11>] blkdev_get+0x61/0x2c0
[  600.897113]  [<ffffffff815c365e>] ? _raw_spin_lock+0xe/0x20
[  600.897117]  [<ffffffff81199d70>] ? blkdev_open+0x0/0x80
[  600.897120]  [<ffffffff81199dd5>] blkdev_open+0x65/0x80
[  600.897125]  [<ffffffff81162d2e>] __dentry_open+0xce/0x2f0
[  600.897129]  [<ffffffff8116ef73>] ? generic_permission+0x23/0xc0
[  600.897133]  [<ffffffff81164221>] nameidata_to_filp+0x71/0x80
[  600.897138]  [<ffffffff81173428>] finish_open+0xc8/0x1b0
[  600.897141]  [<ffffffff81172617>] ? do_path_lookup+0x87/0x160
[  600.897145]  [<ffffffff81173be8>] do_filp_open+0x2c8/0x7c0
[  600.897150]  [<ffffffff813b6ef7>] ? put_device+0x17/0x20
[  600.897154]  [<ffffffff813dd6a4>] ? scsi_device_put+0x44/0x60
[  600.897159]  [<ffffffff812e6e47>] ? __strncpy_from_user+0x27/0x60
[  600.897164]  [<ffffffff81180f17>] ? alloc_fd+0xf7/0x150
[  600.897168]  [<ffffffff8116429a>] do_sys_open+0x6a/0x150
[  600.897171]  [<ffffffff81162c30>] ? filp_close+0x60/0x90
[  600.897174]  [<ffffffff811643a0>] sys_open+0x20/0x30
[  600.897179]  [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b
[  600.897197] INFO: task blkid:2059 blocked for more than 120 seconds.
[  600.897199] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  600.897201] blkid           D 0000000000000003     0  2059    511 0x00000000
[  600.897205]  ffff8801d3a43b48 0000000000000086 ffff8801d3a43fd8 ffff8801d3a42000
[  600.897210]  0000000000013d00 ffff8801d3a583b8 ffff8801d3a43fd8 0000000000013d00
[  600.897214]  ffff88020ed444a0 ffff8801d3a58000 0000000000800040 ffff88020b995d60
[  600.897218] Call Trace:
[  600.897223]  [<ffffffff815c2397>] __mutex_lock_slowpath+0xf7/0x180
[  600.897227]  [<ffffffff815c1deb>] mutex_lock+0x2b/0x50
[  600.897231]  [<ffffffff81199720>] __blkdev_get+0x50/0x3e0
[  600.897235]  [<ffffffff81199b11>] blkdev_get+0x61/0x2c0
[  600.897238]  [<ffffffff815c365e>] ? _raw_spin_lock+0xe/0x20
[  600.897242]  [<ffffffff81199d70>] ? blkdev_open+0x0/0x80
[  600.897245]  [<ffffffff81199dd5>] blkdev_open+0x65/0x80
[  600.897249]  [<ffffffff81162d2e>] __dentry_open+0xce/0x2f0
[  600.897252]  [<ffffffff8116ef73>] ? generic_permission+0x23/0xc0
[  600.897256]  [<ffffffff81164221>] nameidata_to_filp+0x71/0x80
[  600.897259]  [<ffffffff81173428>] finish_open+0xc8/0x1b0
[  600.897263]  [<ffffffff81172617>] ? do_path_lookup+0x87/0x160
[  600.897267]  [<ffffffff81173be8>] do_filp_open+0x2c8/0x7c0
[  600.897271]  [<ffffffff812e6e47>] ? __strncpy_from_user+0x27/0x60
[  600.897275]  [<ffffffff81180f17>] ? alloc_fd+0xf7/0x150
[  600.897279]  [<ffffffff8116429a>] do_sys_open+0x6a/0x150
[  600.897283]  [<ffffffff811643a0>] sys_open+0x20/0x30
[  600.897286]  [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b

Questo è quanto purtroppo.

[magozurlinux]

Prova a cambiare questo parametro dalla regola udev a tutte e tre le righe:

Codice: Seleziona tutto

SUBSYSTEMS=="scsi"

salva ed esci dall'editor di testo.

Da terminale dai questo comando:

Codice: Seleziona tutto

sudo service udev restart

Riavvia il pc.

[ormo]

fuffa!
regola cambiata e riavviato.
dmesg:

Codice: Seleziona tutto

[  135.177735] sd 8:0:0:3: [sde] 7872512 512-byte logical blocks: (4.03 GB/3.75 GiB)
[  135.178341] sd 8:0:0:3: [sde] Assuming drive cache: write through
[  135.179467] sd 8:0:0:3: [sde] Assuming drive cache: write through
[  315.051131] sd 8:0:0:3: timing out command, waited 180s
[  315.051147] sd 8:0:0:3: [sde] Unhandled sense code
[  315.051149] sd 8:0:0:3: [sde]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  315.051152] sd 8:0:0:3: [sde]  Sense Key : Hardware Error [current] 
[  315.051155] sd 8:0:0:3: [sde]  Add. Sense: Unrecovered read error
[  315.051159] sd 8:0:0:3: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  315.051166] end_request: I/O error, dev sde, sector 0
[  315.051169] Buffer I/O error on device sde, logical block 0

lsusb:

Codice: Seleziona tutto

ormo@dabox:~$ lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 0b05:179c ASUSTek Computer, Inc. 
Bus 002 Device 003: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0cf2:6230 ENE Technology, Inc. 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub