ricoh aficio cl1000n, problemi dopo l'upgrade
Inviato: giovedì 20 ottobre 2011, 12:28
Buongiorno, la stampante mi dà grossi problemi ed essendo al lavoro sono un pò nella ****** . In pratica stampa delle pagine bene, in genere una, e quelle successive me le da bianche in sequenza, circa 10-15 pagine bianche, e non mi stampa quello che ho bisogno di stampare ovviamente. Sono molto in difficoltà, potete aiutarmi? grazie Paolo
Codice: Seleziona tutto
dcorsa@ubuntu:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 2001:f103 D-Link Corp. DUB-H7 7-port USB 2.0 hub
Bus 001 Device 004: ID 03f0:1705 Hewlett-Packard ScanJet 5590
Bus 001 Device 005: ID 058f:6363 Alcor Micro Corp.
Bus 001 Device 006: ID 07d1:3c0a D-Link System DWA-140 RangeBooster N Adapter(rev.B2) [Ralink RT2870]
Bus 001 Device 007: ID 18a5:0216 Verbatim, Ltd External Hard Drive
Bus 001 Device 008: ID 045e:076c Microsoft Corp.
Bus 001 Device 011: ID 05ca:0403 Ricoh Co., Ltd Printing Support
dcorsa@ubuntu:~$
Codice: Seleziona tutto
dcorsa@ubuntu:~$ dmesg | grep usb
[ 0.536132] usbcore: registered new interface driver usbfs
[ 0.536139] usbcore: registered new interface driver hub
[ 0.536163] usbcore: registered new device driver usb
[ 1.099759] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.343803] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 1.547940] usb 1-1.1: new high speed USB device number 3 using ehci_hcd
[ 1.711973] usb 1-1.3: new high speed USB device number 4 using ehci_hcd
[ 1.924010] usb 1-1.5: new high speed USB device number 5 using ehci_hcd
[ 2.021255] usbcore: registered new interface driver uas
[ 2.088008] usb 1-1.1.5: new high speed USB device number 6 using ehci_hcd
[ 2.396040] usb 1-1.1.2: new high speed USB device number 7 using ehci_hcd
[ 2.500744] scsi6 : usb-storage 1-1.5:1.0
[ 2.501009] scsi7 : usb-storage 1-1.1.2:1.0
[ 2.501151] usbcore: registered new interface driver usb-storage
[ 2.696082] usb 1-1.1.1: new low speed USB device number 8 using ehci_hcd
[ 2.797492] generic-usb: probe of 0003:058F:6363.0001 failed with error -22
[ 2.807126] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input3
[ 2.807202] generic-usb 0003:045E:076C.0002: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:1a.0-1.1.1/input0
[ 2.807212] usbcore: registered new interface driver usbhid
[ 2.807213] usbhid: USB HID core driver
[ 20.854306] Registered led device: rt2800usb-phy0::radio
[ 20.854323] Registered led device: rt2800usb-phy0::assoc
[ 20.854338] Registered led device: rt2800usb-phy0::quality
[ 20.854536] usbcore: registered new interface driver rt2800usb
[ 1135.242259] usb 2-1.4: new high speed USB device number 3 using ehci_hcd
[ 1135.472683] usbcore: registered new interface driver cdc_ether
[ 1135.869697] rndis_host 2-1.4:1.0: eth1: register 'rndis_host' at usb-0000:00:1d.0-1.4, RNDIS device (poll status before control), 80:00:60:0f:e8:00
[ 1135.869745] usbcore: registered new interface driver rndis_host
[ 1135.879226] usbcore: registered new interface driver rndis_wlan
[ 1526.506049] usb 2-1.4: USB disconnect, device number 3
[ 1526.506221] rndis_host 2-1.4:1.0: eth1: unregister 'rndis_host' usb-0000:00:1d.0-1.4, RNDIS device (poll status before control)
[ 5851.915768] usb 1-1.2: new high speed USB device number 9 using ehci_hcd
[ 7434.720895] usb 1-1.2: USB disconnect, device number 9
[ 7831.500441] usb 1-1.2: new high speed USB device number 10 using ehci_hcd
[ 9194.602535] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'simple-scan' sets config #1
[ 9211.136091] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'simple-scan' sets config #1
[ 9271.281919] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'simple-scan' sets config #1
[ 9282.084670] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'simple-scan' sets config #1
[ 9295.254417] usb 1-1.2: USB disconnect, device number 10
[ 9297.499013] usb 1-1.4: new high speed USB device number 11 using ehci_hcd
dcorsa@ubuntu:~$